HELP - NVIDIA GTX675M (with GDDR5 4GB VRAM) on MSI GT60 0ND

As the tittle said my NVIDIA GTX675M is not working :( eventually my notebook doesn't even recognize the vcard i have already tried everything: wipe out, reset factory mode, actualize to w8.1, downgrade to w7 but still getting no answer :/ off course that i have deleted the driver, re installed, updated, EVERYTHING still no answer :(
Hope and answer i been feeling frustrated since a lot of time cause of it
thank you anyways :3

create a bootable USB key and extract nvidia flash tool over the USB key:
http://www.techpowerup.com/downloads/2257/nvflash-5-136/
then boot your notebook to pure DOS and type:
nvflash -b gg.rom [ENTER]
see if the card will be seen and if the vbios backup of it will be taken

Similar Messages

  • MSI GT60 0ND 675M Throttling Problem (NEED HELP)

    Hello MSI Forum
    I have 2 year old MSI GT60 0ND with Intel i7-3630QM and Nvidia GTX 675M with 2GB GDDR5 memory.
    My problem is focused to all games. After few minutes playing game fps starts to drop frequently under 30 fps.
    But after few seconds it comes back to normal state.
    I have cleaned fan from dust and it doesnt have any effect. Also running fan on turbo mode doesnt have any noticable effect.
    - Never updated bios
    - Running Windows 8.1
    - Always updating drivers.
    - Intel speedstep is disabled, no effect.
    I think its problem with CPU throttling but i cant find any thread to help with issue.
    Anyone can help me?
    Thx in advance!

    Hi ijimma,
    1. Does the problem happen recently? If so, then maybe some driver or system update has caused the problem.
    2. Check the FAQ and see if turning off the HDD power saving function. (http://www.msi.com/faq/nb-977.html)
    3. What's the current graphics driver version? (this msi tool helps to export all driver version and installed programs, so sharing the text file to us can let us know better about your system environment.)

  • Hi Everyone Im New, Got Question About Upgrading MSI GT60 0ND With SSD

    Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
     :welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
    Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
    I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
    1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
    2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
    am I screwed    ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
    Please help !! Thanks in advance,
    David

    Quote from: dudiz10 on 10-January-13, 19:20:54
    Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
     :welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
    Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
    I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
    1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
    2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
    am I screwed    ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
    Please help !! Thanks in advance,
    David
    I think serial key of windows is in your bios which you cannot See however it should be automatically activates windows

  • Nvidia GT 730 with gddr5

    I currently have a p7-1297c with a Nvidia GT 730 2gb ddr3 GPU in it. The PC runs perfectly. I recently tried a GT 730 with 1gb gddr5 on it. The box would not boot. I got the blue HP screen, then nothing but beeps. I did put the card in an older m9260f and it worked fine. Are there issues with gddr5 in the 1297?

    Hello @Cjahn,
    I understand that you are having difficulty with getting the Nvidia GT 730 2gb ddr3 GPU to work correctly with your HP Pavilion p7-1297c Desktop PC. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • GT70 2PE poor performance with GTX880M with 4gb vram

    got this laptop lately .. getting only 30 fps in World of Tanks game on medium to high settings while the same setting im using are getting 50-60 fps on another laptop with GTX780M 3gb vram gpu ... how can i fix this issue ?

    I'll be honest, I don't play WoT and I know little to nothing about the game.
    And unfortunately, you're not the first person that I've seen complain of a problem with that game specifically.
    Do other games behave the same as WoT? Or do they work fine?
    If the other games work fine, I'm thinking it's probably a problem with WoT in general and there won't be much anyone here can do to help it unless they are experienced with it.

  • Nvidia quadro FX 5800 4GB compatible with D10 Workstation?

    Hello ,  I bougth a video card Nvidia quadro FX 5800 4GB, the question is If i get a cable 6 pin to 8 pin would the card work or would my workstation explote or something??? 
     Thank you.
    Solved!
    Go to Solution.

    Thank you guys , I installed the card and it works perfectly... 
    I must say that is incredible the amount of polys that this card moves... I move more than 1200000 like if it was only a few hundred polygons.

  • MSI NVIDIA GeForce GT 640, 4GB 128-Bit DDR3 on my p7-1380t Desktop

    I am looking for a new graphics card that will not require a new power supply and I was wondering if this one would work with my computer. I am not looking for any top of the line stuff and nothing too expensive either
    MSI NVIDIA GeForce GT 640, 4GB 128-Bit DDR3
    This question was solved.
    View Solution.

    A-diddy, welcome to the forum.
    If this is the video card that you want to buy, I don't believe that it will work with the existing 300W PSU.  It has an additional power connector which means that it requires more that the 75W provided by the PCIe slot to operate properly.  The specs say that it only consumes 45W.  I don't know why they have an additional power connector.  Your existing PSU does not have the required cable for the connector.
    I suggest calling the manufacturer's Customer Service to verify the requirements are correct.
    Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I have a mac computer 3.2 Ghz intel core i3   with memory 4GB 1333 MHz DDR3,  I have recently purchased an new macbook and have yosemite software and iCloud .  I can no longer us my mac to open up recent numbers documents from my macbook.  I am unabl

    I have a mac computer 3.2 Ghz intel core i3   with memory 4GB 1333 MHz DDR3,  I have recently purchased an new macbook and have yosemite software and iCloud .  I can no longer us my mac to open up recent numbers documents from my macbook.  I am unable to upgrade to allow me to get the current numbers version on my mac. What do I need to do to get all my machines woking in harmony again

    On each machine turn on iCloud and sync all the available apps. Apple explains how to set up iCloud in http://www.apple.com/icloud/setup/
    After doing this run software update on each machine and install all the suggested updates. If you still need help installing the most up-to-date versions of iLife and iWorks open the Mac App Store - click the Purchased tab and update all that need to be updated.

  • IPod being filled with 2.4GB of Other?

    Hi, I have a second generation 8 GB iPod touch. Recently, I've been trying to sync my iPod, but it always says "iTunes did not sync... [the app I wanted the most] because there is not enough room". I look at the bar at the bottom, and discover it's filled it with 2.4GB of yellow other. What is this 'Other' stuff, and how do I get rid of it to sync my iPod?
    Thanks.

    Some say the "other" includes data and corrupted files. Restoring from backup usually helps but sometimes restoring to factory defaults is needed.

  • Serious Problem With Nano 4GB

    I have an Ipod Nano 4GB version that was working perfectly. Today I purchased a song and tried to install it on my Ipod. It wouldn't install. I also noticed that the name had changed from "Erin's Ipod" to "Data" and I saw no songs installed when I viewed it from Itunes. But all of my songs were still installed on my Ipod.
    I went through all of the steps. I uninstalled, restalled and restored factory defaults and I unplugged every other USB device on my computer. I still cannot add songs to it and now I have no songs at all.
    I also noticed that when I use the updater it reports a capacity of 114.5 GB. Which, obviously is wrong and Itunes reports used 99.4 GB, free 16.81 GB.
    Someone please help!
    Thanks.

    with those symptoms, we need need to check on the possibility from the following document:
    Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear

  • Help, Simcard fault with Iphone 1st generation

    Dear all..
    I purchased a Iphone first generation 4gb from someone.
    It is a USA model, but the previous owner already used a different sim card in it.
    But now when I want to put in my card, it doesn't work.
    What can I do?

    This means the previous owner hacked the iPhone.
    Hacking an iPhone for any reason is against Apple's license agreement for the iPhone and is not supported by Apple directly or indirectly via these discussions. You will get no help here with a hacked iPhone.
    Contact the previous owner for help and support with this.

  • Will this card work? - Nvidia Geforce 6800 ULTRA 256MB VRAM AGP Video Card

    I posted a question about getting the maximum resolution from an Apple 30 inch Cinema Display and another card, which didn't work.
    The replies were fast here in the forum and quite correct.
    My next question is regarding the Nvidia Geforce 6800 ULTRA 256MB VRAM AGP Video Card.
    I have an AGP card with an ATi Radeon 9600 Pro card that can't power the 30 inch because it's only 64MB and no DVI output.
    I'm wondering whether this card will give me the maximum resolution?
    Thanks again.

    Hi Japamac-
    Thanks for the quick reply.
    My System Profiler indicates a ATI Radeon 9600 Pro, but it doesn't have the Dual Link since this is an older G5 with only 64MB of VRAM.
    The GeForce 6800 is a refurb, but is Mac compatible.
    I'm hoping that it will work, but since it won't be returnable, I don't want to spend the money needlessly.
    I did order another card that the Apple support suggested should be compatible, but turned out that they sent me the PC version.
    I've spoken to Apple as well and get conflicting info.
    It boils down to the fact that this is a G5 with a late 2004 date.
    It is fast enough for me and my only hang up is that I'm only getting 12980X800 resolution.
    I'm not using it for gaming or graphics processing.
    HTH.

  • My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

    My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

    Hi Venkata from NZ,
    If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

    Hi Friends...
    I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

    Sorry, I am very confused. I asked the following question....
    Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
    The answer that you gave was....
    This is the only one
    Now you are saying that....
    But I have lots of other files on Time Capsule! The back up file is only one of them.
    Can you clarify, please?

  • TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

    I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
    Thor

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

Maybe you are looking for

  • ITunes won't open.(No error message)

    Every time I try opening iTunes, it loads for a few seconds. I can see it in my processes. After the few seconds it disappeares. I'm not too sure if something is blocking it. I don't have an anti-virus running at the moment, so it isn't that. Can any

  • Ssrs 2008 'select all' option to be selected for a parameter

    In a new ssrs 2008 report, the problem is all reports are not selected from the parameter called 'report' when the report runs automatically.  When the report executes, there is nothing displayed in the parameter selection  dropdown box. The user has

  • Error when starting FireFTP

    Error message= TypeError: document.getElementsByTagName(...)[0] is undefined URL= chrome://tidynetwork/content/overlay.js Line Number= 14

  • How to Maintain two different prices for same material in different qty?

    Dear all, How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)? (Vendor is supplying quantities in 2 different batches & also in different prices) Expecting valuable reply. Jeyakantha

  • How to insert record in child table with foreign key

    Hi, I am using Jdeveloper 11.1.2.0. I have two master table one child table. How to insert and update a record in child table with foreign key ? I have created VO based on three EO(one eo is updatable other two eo are references) by using joined quer