Help on 1300 series and Antennas

Can somebody give me recommendations on what I should use for blanket wireless access for multiple condo unit building 4 stories high? I was looking to use the 1300 series and possibly the Air ANT24120 antenna. I want it to penetrate through walls a floors. If anybody has any past experience on this, could you recommend this or another product? Also I am looking to see how far the signal can carry. I am trying to cut down on AP's.

I would make sure to get a good site survey done and make sure that you stay well within the FCC regulations for maximum transmission power. I have done several of these installations using the 1500 series APs strategically placed around the building. Also bear in mind you could have polarization issues as this building is so tall. The unfortunate truth here is that complete penetration of a building this size is very hard to achieve. I have a list of excellent CPE devices that will allow you to bring the system into the building at key density points. Feel free to contact me for those at
[email protected]

Similar Messages

1300 series AP antennas

Dear All,
I wanted to ask whether AIRANT-24120 or other high gain bridge antennas can be used to provide Access point capabilities with 1300 series AP.
My scenario is that, that i wanted to give roaming services to my WIFI clients in approx 15km range. But the data sheets suggests that these antennas can be used for point to point or point to mulipoint bridge scenarios not with the Access point role. In short i was hoping to use AIRANT-24120 with one 1300 series AP to provide AP capabilities with long range.
Please guide me in this regard or suggest me any other solution.

Thanks for clearing the concept, but one more question :)...so what can be the solution to connect a distant client several kilometeres away from my root ( any cisco product u can suggest ?) What i have in my mind is that i connect, two 1300s through omnis and use a bridge mode. and since bridge mode supports clients association this could solve my problem? correct me if i am wrong..

Lumia series and antenna problems - true?

Hello
Just found a very odd recently made study of mobile phones antenna performance. It seems to be serious science, but the results are most definitely not in Lumia's favor. Actually Lumia 925 is rated as the phone with the worst results - which seems ludicrous to me. It's the first I've heard of antenna problems with the series. Can anyone confirm or deny problems with the antenna on recent Lumia models? What are your experiences?
http://erhvervsstyrelsen.dk/file/435579/Mobile_Phone_Antenna_Performance_2013.pdf

It is normal for the signal bars on the phone to fluctuate as it jumps between different cell towers, and both the cell towers and the phone adjust their transmit power all the time. Different phones have different behaviour of the signal indicator. The actual antenna performance can only be measured in a controlled environment, like the nerds from Aalborg University do in the PDF link in the first post.
In real life the antenna performance of my Lumia 720 is on par with my N8. In poor coverage they both give up in the same places. The behaviour selecting 2G or 3G is different though, since the N8 favour 2G when talking while walking or driving, where the Lumia always want to hang on to 3G whenever possible.
Regarding the Aalborg University antenna test, these people are independent and serious about what they do.
Please read the whole PDF, so you'll see that the poor performance is only when held in a phantom hand towards a phantom head, in the right hand, as seen in the cover picture, and that it mainly affects the GSM900 (2G) frequency band, on the devices tested at the time.
Hans

Trouble with Aironet 1300 series

I have a cisco aironet 1300 series and i need to reset it back to factory default. the directions say push the mode button while the access point is off and then turn it on while the mode button is down...
i don't see one button on this thing anywhere.
help needed

Hi Jim,
The 1310 bridge/injector do not have a mode button for configuration reset. However, you can reset the configuration if you use the console port on the injector:
1) Connect console port and power-cycle unit
2) When IOS starts loading, hit ESC key twice to get to the boot-loader prompt
3) At the boot-loader prompt show a directory of the flash filesystem (dir flash:)
4) Delete or rename the files "config.txt" and "env_vars", then boot the system ("delete flash:/config.txt" "delete flash:/env_vars")
(The default user/pass should be Cisco/Cisco)
-Patrick Croak
Wireless TAC

1300 series antenna

Dear All,
I wanted to ask whether AIRANT-24120 or other high gain bridge antennas can be used to provide Access point capabilities with 1300 series AP.
My scenario is that, that i wanted to give roaming services to my WIFI clients in approx 15km range. But the data sheets suggests that these antennas can be used for point to point or point to mulipoint bridge scenarios not with the Access point role. In short i was hoping to use AIRANT-24120 with one 1300 series AP to provide AP capabilities with long range.
Please guide me in this regard or suggest me any other solution.

Hi Tahirali,
In bridge environment this antenna (AIR-ANT24120 can operate up to 15.8 miles (approx ) at 2Mbps data rates. ie when two bridge are talking.
But what look like you are looking 15 km coverage for client. And its not possible because in AP enviroment we have client (wireless laptop and phone ) talking to AP.
Even though these bridge are powerful and can transmit up to 15 km using this antenna but we donot need to forget that these client operate with very lower power radio in it. ie less than 1 milli watt voltage.
So even though 1310 signal will reach client client will not able to send it signal so far ie 15 km or so . And hence its not possible until you have local tower set to all over this 15 km radius so to allow client to send back signal to server .
Its very similar as mobile phone as small cell that is phone connect to server through local tower.
thanks
kunal

1300 series as Bridge and AP both

Any idea if 1300 series is bridging with another 1300 with integrated antennas on both the end, how would be the performance of it if used for AP mode as well as it works both ways.

Configuring access points and bridges to treat a workgroup bridge as a client device allows more workgroup bridges to associate to the same access point, or to associate using an SSID that is not an infrastructure SSID. The performance cost of reliable multicast deliveryduplication of each multicast packet sent to each workgroup bridge limits the number of infrastructure devices, including workgroup bridges, that can associate to an access point or bridge. To increase beyond 20 the number of workgroup bridges that can associate to the access point, the access point must reduce the delivery reliability of multicast packets to workgroup bridges. With reduced reliability, the access point cannot confirm whether multicast packets reach the intended workgroup bridge, so workgroup bridges at the edge of the access point's coverage area might lose IP connectivity.
When you treat workgroup bridges as client devices, you increase performance but reduce reliability. You use the no infrastructure client configuration interface command to configure access points and bridges to treat workgroup bridges as simple client devices. This is the default setting.

1400 series bridge and antenna

dear all
i have 2 offices distance between them is 3.5 kilometers. i want to link between them thru 1400 series bridge.
but i'm not clear abt the location, bcoz the next office is 3.5 km away so i dont know which side it is, so in this case, how can i select the antenna, is it possible to cover this 3.5 km with 1300 series Access points.
how can i complete this connectivity please guide me.
Thnaks & regds
Binoy

Hi
I recommend you to work with 1400 bridge antenna (dish, sector or omni). If you want a point to point link , then you can work with 2 dish antennas (3,5 Km is a small distance for this antennas)

HT1349 Help! I downloaded a tv series and two rentals in my itunes account, synched to my itouch, and cannot find them on my itouch, what am i doing wrong

Help! I downloaded a tv series and two rentals in my itunes account, I synched to my itouch, and i can not find them on my itouch...what did i do wrong

First off the App Store app cannot be deleted from your phone. The same holds true for all of the default apps. Your kids may have turned on Restrictions in the Settings app that hides the App Store app but, again, it cannot be deleted.
When you connect a phone to iTunes on your computer I suggest you view the left sidebar in iTunes. If you do not have a left sidebar in iTunes use the View Menu to View Sidebar. When you connect your phone to your computer it will be listed in that left sidebar.
Select your phone in the left sidebar.
In the Right window a row of tab will appear. Select Apps.
Then select the apps you want on your phone. You do not drag apps to your phone.
After you have selected the apps you want synced to your phone click on Apply or Sync. And let the process complete. The apps you selected will be copied to your phone.

Purchased tv series and trying to download and i keep getting error =9006...help .... I still have 62 downloads that I paid for

I have purchased over 200.00 in movies and tv series. I was able to download the movies fine and part of the series. Now nothing will download I keep getting an error 9006 please someone help. I have no idea what to do

Same here - did the latest iTunes update and boy am I glad I did that; haven't been able to run iTunes since. Have re-installed after uninstalling as per one of the other help pages, re-booting, and now instead of getting the above error message I get one that says Apple Application support not found. Please uninstall then reinstall. Apple error 2.
Not thanks - Apple, you might want to do something about this I'm guessing since I'm no longer able to use iTunes thanks to your update?

I tried to download a tv series and only 2 of the episode actually downloaded (the others have an error message). I can't figure out how to try to download them again. Thanks for any help

I tried to download a tv series and only 2 of the episode actually downloaded (the others have an error message). I can't figure out how to try to download them again. Thanks for any help

Open the Disk Utility in the /Applications/Utilities/ folder, click on it in the sidebar, select the Erase tab, and reformat it.
(103900)

What are the Cisco 1300 series Antenna Alignment options?

I am wondering if there are any options for aligning the antennas other than RSSI LED indications. The cisco aironet is going to be on top of a 10m tower and the lights will not be visible. Is there any way to configure them to an audible output that would increase in loudness or pitch when the signal was strongest?

Check this:-
"Best Practices" for positioning Access Points (AP's) and Antennas
https://supportforums.cisco.com/docs/DOC-16627
thanks,
Vinay

Cisco Aironet 1300 series

Hello,
i have 2 cisco aironet 1300 series configured as root bridge and non root bridge, i managed to configure them and they are associating only when they adjacent , when i separate them them communication fail , could you please help me to solve this . thx

Those are very old bridges. So if they are still functioning okay, do they require external antennas or not and do you have external antennas if they do?
Antenna Interface
• AIR-BR1310G-x-K9 or AIR-LAP1310G-x-K9: Air interface (integrated directional antenna)
• AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R: Two RP-TNC type connectors for external antennas
-Scott

Hp psc 1300 series all in one driver

my hp 1300 series printer is not having drivers, i have tried in many ways. but useless effort. At last i came here for all of our friends support, those who are using these above hp 1300 series all-in-one printers. friends please help me in this issue to get a driver for my printer. Thanking you all.

Hi talamala,
if you go to the link below, and under "detect MY Product" on the right, click find now, this should hopefully identify the driver you need
http://www8.hp.com/ie/en/drivers.html
if that doesn;t work, please let me know what OS you are using and the exact model number of your printer I think psc 1300 is the series number not the model number.
regards,
Na-Vi
I am an HP employee, I am speaking for myself and not on behalf of HP.
Click the thumbs up to say "Thanks." Mark Accepted Solution on the post that solves your problem

Aironet 1300 Bridge and AP simultaneously

Hello Everybody I`ll like to use the Aironet 1300 in a Bridge and AP operation simultaneously and I`ll use a Omnidirectional Antenna ANT-2506 to cover clientes. The question is if in this design the non root AP/bridge operate like repeaters and what about the Bandwith. does this anntena work for a AP application? What is the coverage with this anntena for clients and others bridges.
My scenario is a Root 1300 with Antenna ANT-2506 for clients and bridges and 5 1300 (non root) with Antenna ANT-2506 for clients and bridges.
Thanks in advance!

The flexibility of the Cisco Aironet 1300 Series allows it to operate asa wireless bridge, access point, or a workgroup bridge.
http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a00804158b6.html

Cisco Aironet 1300 Series Power

Can the 1310ap receive it's power from a POE switch?

Hi Edward,
Sadly the 1310 cannot be powered by PoE ,but, the Power Injector can be up to 100 meters away from the unit.
Dual coaxial cable to run from the power injector to the 1300. See attached notes:
Cisco Aironet 1300 Series
Cisco Aironet 1300 Series Access Point/Bridge Power Injector
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Ethernet Ports
The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
Power
The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
AIR-PWRINJ-BLR2
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
Hope this helps!
Rob

Help on 1300 series and Antennas

Similar Messages

Maybe you are looking for