Help on ABAP coding

Hi experts,
I have a selct-option for a date field.
This will accept only 3 months date range.
now in report i have to display data based on months.
ie.. 1st month data in 1st col, 2nd month data in 2nd col n 3rd month data in 3rd col.
Can any one give me the logic or even sample code is highly appreciated
Thanks in advance for all the reponces.
Thanks & regds
kiran

U need to try the below logic.
AT SELECTION-SCREEN.
call function 'MONTHS_BETWEEN_TWO_DATES'
    exporting
        i_datum_bis = pfromdate
        i_datum_von = ptodate
    importing
        e_monate = lnum.
   If lnum > 3.
      --error message as the period is more than 3 months
   endif.
start-of-selection.
collect your data in itab lets say month wise.
itab-material
itab-month
itab-sales.
***iout with structure material,s1,s2,s3.
loop at itab.
clear iout.
read table iout with key material = itab-material.
if sy-subrc = 0.
    case itab-month.
       when 1.
         move itab-sales to iout-s1.
         modify iout index sy-tabix.
       when 2.
         move itab-sales to iout-s2.
         modify iout index sy-tabix.
       when 3.
         move itab-sales to iout-s3.
         modify iout index sy-tabix.
      endcase.
   else.
       move itab-material to iout-material.
       move itab-sales to iout-s1.
       append iout.
    endif.
endloop.
iout has your data and you can just loop through and print.
Message was edited by: Anurag Bankley

Similar Messages

Need help in ABAP coding in start routine

Hi,
I have a requriement like
-To take the value of month which is an attribute of category(info Object) for which category value is 1. I need to apply the month obtained as the filter to another info object. I have opted to write this ABAP code in start routine. Can anyone guide me on this code.
Thanks in advance.

do you not have an abap-er at your disposal? i don't imagine this to be quick & dirty that can be written without access to your system! some analysis work may also be required before the actual coding can be done...so I wouldn't post the entire functional spec (business requirement) here hoping for a solution; that would be too weird.
Regards.

Need help with ABAP coding using java

Dear experts,
I have used ABAP to code many reports/function modules.However as i know java quite well,i want to achieve the same using java.I have utilized JCO to retrieve information from RFC in this mission.
However i realized that i had to code all things using ABAP and use java only as interface to connect to
SAP fetch that module and display information on console.It was not that fun.
I want that i should not Login to SAP but work only using java.
I heard SAP Netweaver is a good choice.But i dont know much about it.Will i be able to develop reports only by java and how ?
Plz suggest.

hi,
I hope that you already have the J2ME Toolkit and that your emulator works okay. In the toolkit you get several examples to show you how to program a MIDlet. One has to do with a HTTP client server connection. Also in the API documentation for the J2ME there is a Connector class that you used to set up this communication and in the description of this class it pretty thoroughly explains how to set up an HTTP protocol client.
However, if you want to do some other kind of networking then you are pretty much out of luck, as the TCPIP socket protocol has not been fully implemented and is optional to the J2ME specifications, only the HTTP protocol is certain to be available. This means that mobile phone companies can add other networking functionality to their phone's java virtual machine if they feel like it. This is a bummer I know.
I hope this helps.
Cheers,
Mark

Need help in ABAP coding

Hi Gurus,
here i hav some complication for displaying data in output.In output I have to show characteristics(ysd-characteristics,,,, ysd is a customized tablehaving fields vbeln, matnr, posnr, characteristics......) of material with respect to sales document number(vbap-vbeln).when I am executing the prog with below SELECT statement----
select distinct
                    ysd~vbeln
                     ysdposnr ysdmatnr
            ysd~characteristic
                    vbapposnr vbapmatnr
                     vbap~arktx
                    vbap~kwmeng
                     into corresponding fields of table itab1
           from ysd_famd_chrctcs as ysd inner join vbap
          on ysdvbeln = vbapvbeln
          and ysdposnr = vbapposnr
           where vbap~vbeln = p_vbeln.
After looping itab1 it is giving output like below.
-->>
Sr |   MatNum | MatDesc | Charecteristics | Quantity
no |                |               |                        |
1   | 00000012 |   CCslab |   Moisture         |   50
1   | 00000012 |   CCslab |   over size         |   50
1   | 00000012 |   CCslab |   under size       |   50
1   | 00000012 |   CCslab |   phos percnt     |   50
1   | 00000012 |   CCslab |   chrome           |   50
1   | 00000012 |   CCslab |   Ferrous           |   50
but output should be like below
-->>
Sr |   MatNum | MatDesc | Charecteristics | Quantity
no |                |               |                        |
1   | 00000012 |   CCslab |   Moisture         |   50
                                     |   over size         |
                                     |   under size       |
                                     |   phos percnt     |
                                     |   chrome           |
                                     |   Ferrous           |
what should i write with select statement to get this.
I tried using DELETE ADJACENT...... but it is deletin all characteristics from output.
pls help...
Regard
Saif

Hi,
You can make use of AT NEW .... ENDAT statements.
Declare another internal table ITAB2 & its corresponding work area.
Refer the below code:
Loop at ITAB1 INTO WA_ITAB1.
CLEAR F_FLAG.
AT NEW MATNR.
WA_ITAB2-MATNR = WA_ITAB1-MATNR.
WA_ITAB2-DESC   = WA_ITAB1-DESC.
similarly do the same for other fields...
f_flag = 1.
ENDAT.
IF f_flag NE '1'.
WA_ITAB2-MATNR = SPACE.
WA_ITAB2-DESC   = SPACE.
WA_ITAB2-CHAR   = WA_ITAB1-CHAR.
ENDIF.
APPEND WA_ITAB2 TO ITAB2.
CLEAR WA_ITAB2.
ENDLOOP.
Just try and see.
reward points if useful.
Thanks,
Asha

Help needed on ABAP coding - put restricted kf as abap coding in update rle

All,
I have to change resticted keyfigures from query level into the update rules but don't know the correct abap coding.
The field trade sales (0G_AVVTRS) must be limited by Type of Sales (0G_CWWTSN) range (# ; 350) and (600 ; 999).
In other words: keyfigure 0G_AVVTRS may only show it's value when characteristic 0G_CWWTSN value is between the ranges (# ; 350) or (600 ; 999). Wen the value is outside this range the it must be empty.
Please advise how to handle this with abap code (release 3.1).
Many thanks,
Tom

In the update rules for mapping 0G_AVVTRS try this :
[code]$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
result value of the routine
if COMM_STRUCTURE-(Type of Sales) le '350' or
 (COMM_STRUCTURE-(Type of Sales) ge '600'
 and COMM_STRUCTURE-(Type of Sales) le '999').
 RESULT = COMM_STRUCTURE-(Field Trade Sales).
else.
 RESULT = 0.
endif.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -[/code]
Hope this helps.

ABAP coding issues after BW upgrade

Hello Gurus,
We recently did a BW upgrade from version 3.5 to 7.31 and even since have been encountering few strange issues with many of our ABAP coding.
For example, there is an APPEND statement in one of our Update Rules as below:
APPEND <lw_rtab_wa> TO <lt_rtab>.
Before upgrade, this was working as expected and the contents of <lw_rtab_wa> was getting transferred to <lt_rtab> without any issues.
Now after upgrade, we find that the contents of <lw_rtab_wa> is being clubbed together in the 1st few columns of <lt_rtab>.
Both the <lw_rtab_wa> & <lt_rtab> have the same fields, but the length of few fields in <lt_rtab> is bigger than that in <lw_rtab_wa>. For example DOC_NUMBER in <lw_rtab_wa> is of type C(10) while in <lt_rtab> it is C(20). This difference is causing the data of the 2nd field also to be over-writen in the DOC_NUMBER field of <lt_rtab>.
Please let us know if you have encountered similar situations after your BW upgrade. Any possible solutions to this would be very much appreciated as this is causing PROD issues at the moment!
Thanks
Arvind

Hi Arvind,
After Upgrade In BW 7.3 or higher versions All data elements that use the domain RSCHAVL are converted from CHAR60 to SSTRING. thats the reason you are getting that syntax error.
Take help of some ABAP programmer and try to change the syntax as suggested from below link.
Just scroll down and check the same. even though link shows for BW 7.4 issues, its applicable for 7.3 too. Please let me know
http://scn.sap.com/community/data-warehousing/bw/blog/2014/07/28/sap-bw-74-analysis-issues
Thanks
Ajay

ABAP coding in defining start condition for action.

Hi Everybody,
Can anyone tell me if ABAP coding is possible for giving condition for action? If yes, where? Is it in condition editor? I have 3 validations to be done:- 1) Filter service contract (transaction type USC), 2) Filter the active contracts, 3) Filter contracts which doesn't have billing cycle in current month.
So, do you think these validations can be done in start condition of action? First two validations are static in nature and thus can be done. But, how about the last condition?
Please help.
Regards,
Sanj.

Hi Sanj
I would do this.
1. The transaction type cannot be changed, therfore I will set this up in the scheduling condition.
2. Active contracts. Depends on teh definiton of active. If it is based on some status then I will use scheduling condition.
3. use one of the dates in the date profile to determine if the billing date is in the current month or not.
See if this helps.
Thanks

ABAP coding in LSMW

Hi All,
A)Is it possible to write ABAP coding in LSMW, if yes where can we do this. and
B)During the First Step of LSMW we come across 1. Standard/Batch Direct Input
                                                                      2.Batch input recording
                                                                      3.Business Object Method (BAPI)
                                                                      4.IDOC(intermediate document)
which one to use and when to use?
C) what are the advantages/disadvantages of LSMW compared to other data transfer methods like BDC.
please let me know the answers for above.
useful answers will be rewarded for the same.
Regards,
Yellappa.

hi
for q posed to ashvinder, its used only for validation of the input records and their corresponding processing, i will explain a simple scenario,
1. if u want to transfer data a part of which has already been created in the system. You
want to decide at runtime whether the data is created or changed.
u can write this coding in corresponding field
2. You want to "skip" a record depending on a certain condition, i.e. this record shall not be converted and transferred to the output file.
3. Duplicate a Record
If want complex pricing procedures u cant do that in LSMW, u need to go for BDC's
for ur question about what to use, BAPI or IDOC, check this link
http://www.sap-img.com/abap/ale-bapi.htm
http://searchsap.techtarget.com/generic/0,295582,sid21_gci1089362,00.html?bucket=ETA&topic=299357
award points if found helpful
Message was edited by:
        Rahul Kavuri

Docs for ABAP coding for BW

Hello Gurus,
I need some documents or links where i can find enough info to learn abt ABAP coding in transfer, update rules, ABAP routine in infopackage and in the start routine etc. Can any one help me with this?
Looking for some basic concepts of ABAP.
Thank you,
Kumar
[email protected]

Hi,
Please check the following links that may be useful for you.
http://help.sap.com/saphelp_46c/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4493c4a6-0301-0010-62a2-efd6ded61e04https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/60cecb1d-0a01-0010-8289-b14fd99062fa
http://www.bwexpertonline.com/downloads/ABAPCodeforRuvinskyarticle.doc
http://www.bwexpertonline.com/downloads/Extractor_Source_Code.doc
http://www.bwexpertonline.com/downloads/Nissen.doc
https://www.sdn.sap.com/irj/sdn/abap
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.sapgenie.com/faq/abap.htm
Regards,
®

Back ground job needed to scheduled immedietly using ABAP coding

is there anything in ABAP coding in JOB_OPEN and JOB_SUBMIT, i can trigger immedtiely ,i need not to goto SM#& and do manualy
please help me in this
thanking you 'sridhar

Hi,
I use parameter STRTIMMED with function module JOB_CLOSE.
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname          = local_job-jobname
    IMPORTING
      jobcount         = local_job-jobcount
    EXCEPTIONS
      cant_create_job = 1
      invalid_job_data = 2
      jobname_missing = 3
      OTHERS           = 4.
SUBMIT abap
          WITH param = p_param AND RETURN TO SAP-SPOOL
                VIA JOB local_job-jobname NUMBER local_job-jobcount
              WITHOUT SPOOL DYNPRO
              DESTINATION 'ZMD'
              IMMEDIATELY ' '
              KEEP IN SPOOL 'X'.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = local_job-jobcount
        jobname              = local_job-jobname
        strtimmed            = 'X'
        targetserver         = w_sys
Cheers
Allan

Abap coding in SAP query (SQ01)

Hi,
By using the a table like for MSEG if i want to retrieve data for the movement type 101 (receipts from vendor), i can build a query using this table and retrieve data - my problem starts when the system shows individual line items instead of cumulated result as mentioned in the following example.
Example :-
for the date 01.07.2007 - i have 10 entries (101 movement) of quantity 1,2,3,4,5,6,7,8,9,10 against a vendor V1. - the query lists all the 10 entries.
But what is required is the cumulated entry against the vendor like shown below
vendor    receipt
V1         55.
What abap coding should be written (provide the sample code) and the where should it be written in the query transaction SQ01
Regards,
M.M

Hi Magesh,
If you do not wish to see the detail lines, then you do not need to create them. Just create the Statistics portion only.
If you wish to see 'summarized Vendor quantity by day', then you might sort on Vendor first, then posting date second. Or, vice versa, depending on your business requirement. I would think that you might also wish to include Material in the sort, since each Material is probably valued differently.
For more info on creating statistics in SAP Query, refer to
http://help.sap.com/erp2005_ehp_02/helpdata/en/d2/cb4256455611d189710000e8322d00/frameset.htm
   Regards,
   Bruce

Help with ABAP code in CMOD.

dear all,
can you help me solve the below abap coding problem? thanks.
somewhere at the top
DATA: L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA: L_S_VAR_RANGE LIKE E_T_RANGE.
 LOOP AT I_T_VAR_RANGE INTO L_S_VAR_RANGE. <-- error msg stops here.
 FIND l_s_var_range-vnam IN TABLE it_vnam.
 IF sy-subrc = 0.
 l_check = 'X'.
 EXIT.
 ENDIF.
 ENDLOOP.
Error message...
"L_S_VAR_RANGE" cannot be converted to the line type of "I_T_VAR_RANGE".
Thanks all.

Hi Try this,
DATA: L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA: L_S_VAR_RANGE LIKE LINE OF I_T_VAR_RANGE .
LOOP AT I_T_VAR_RANGE INTO L_S_VAR_RANGE. <-- error msg stops here.
 FIND l_s_var_range-vnam IN TABLE it_vnam.
 IF sy-subrc = 0.
 l_check = 'X'.
 EXIT.
 ENDIF.
 ENDLOOP.
Regards,
Ravi

ABAP-Coding for EVERY Key figure in infocube 0RT_C02

Hello gurus;
 Does anybody know which is the reason for Abap-coding for every key figure in infocube 0rt_c02 from InfoSource 2lis_13_vditm?
Thanks in advanced!
Csr

Hi,
this is done like this in the business content because the extractor is providing the data with a process key; this process key is then translated into meaningfull business objects (key figures);
fro instance ProcessKey 202 in application SD is reflecting Credit memos:
* Credit Memo
IF COMM_STRUCTURE-PROCESSKEY = '202'
 AND COMM_STRUCTURE-BWAPPLNM EQ 'SD'.
* currency convert
 IF COMM_STRUCTURE-COST <> 0. "Value in document UNIT
 PERFORM LOC_CURR_CONVERT
 USING COMM_STRUCTURE-COST "Value in doc UNIT
 COMM_STRUCTURE-TRANS_DATE "Date for exchange
 COMM_STRUCTURE-DOC_CURRCY "Document Currency
 COMM_STRUCTURE-LOC_CURRCY "Local currency
* COMM_STRUCTURE-EXCHG_RATE "Exchanging rate
 COMM_STRUCTURE-/BIC/ZEXRATEAC "Exchanging rate Acctn
 CHANGING RESULT.
* the KPI's must be turned to positive because the SD-extractors
* allways deliver them neg. if it's a process back (e.g. return order)
 RESULT = RESULT * ( -1 ).
 UNIT = COMM_STRUCTURE-LOC_CURRCY.
* if the returncode is not equal zero, the result will not be updated
 RETURNCODE = 0.
 ELSE.
* if the returncode is not equal zero, the result will not be updated
 RETURNCODE = 4.
 ENDIF.
ELSE.
* if the returncode is not equal zero, the result will not be updated
 RETURNCODE = 4.
ENDIF.
the above routine is quite self explaining the code.
hope this helps...
Olivier.
Message was edited by:
 Olivier Cora

Difference between 3X and 7X routine in term of ABAP coding

Hi to all,
Please can any one tell me?
What is difference between 3X and 7X routine, in technical aspect (ABAP coding).
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi Rana,
Check the below link
[Differences in Routine Concepts in BW3.x n Bi7.0|http://help.sap.com/saphelp_nw2004s/helpdata/en/44/bd9b5be97c112ce10000000a11466f/content.htm]
Regards
KP

What is difference among F5 and F6 and F7 in ABAP coding?

what is difference among F5 and F6 and F7 in ABAP coding ? Can u give me any example regarding this thread ?

Some additional info which can be quite helpful.
a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
· You can set up to five watchpoints in a program.
See also Setting Watchpoints.
· You can also specify the conditions under which a watchpoint is to become active.
· You can specify a logical link for up to five (conditional) watchpoints.
See also Specifying Logical Links.
· You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in
the specified program.
· You can change and delete watchpoints.
See Changing Watchpoints
· You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Breakpoints
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
· You do not have to change the program code.
· You can set them even when the program is locked by another programmer.
· You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
we can keep them at :
Statements
Subroutines
Function Module Calls
at Methods
System Exceptions
break point :
we can start debugging from that point or if we keep break point at some place we can directly got ot htat point using f6.
watch point: for example if we have to check the output for 4000 records based on a field value i.e.for vendor number 'in'we have to check then we will create watchpoint on field LIFNR value '2000'. then we can directly go to vendor whose numbe ris 2000

Help on ABAP coding

Similar Messages

Maybe you are looking for