Help on cda files

Seems with new computers (Windows 7 32 bit) Adobe Audition 3.0
will no longer load songs from our CD service.
Says something to the effect of .cda files not supported
In looking at forums, its suggested to use Exact Audio Copier or
something?
Is there nothing in settings or on our file association that will help
this?
Thanks
JohnGabrielsen
KCWC Radio
Riverton, Wyoming
307 840 1814

I would try Videora iPod converter, as this works well under Windows, and is free. Check out the following guide http://www.videora.com/en-us/Converter/iPod/

Similar Messages

Audition 3.01 will not open .cda files from audio cd Win 7 Home 64 bit

I installed Adobe Audition 3 on my new laptop...installed the 3.01 patch, everything seems to work fine, but extracting audio from cd's and opening cda files from audio cd's...my previous laptop was win 7 pro 32 bit and had no problems with this...this laptop is win 7 home 64 bit. I am able to import the cda tracks as wav files via itunes, but shouldn't have to do this...help. I can see the files in the open file list, but when I select one it says raw PCM or Unsupported format...

I just checked and I can open a CD track for editing in Audition 3.01 Win 7 64-bit Professional at File>Extract Audio From CD. Not sure why it isn't working for you.
But there are several threads on this issue in the archives, which you can read by inserting "cda file" without the quotes in Search Forums (note that there are two Search windows on the forum pages, and you want the one that's labeled "Search Forums").
Here's one good thread on it, for example:
http://forums.adobe.com/message/1191507#1191507
I know you want this to work in Audition, and it should, but if you want a quick workaround, rather than iTunes, I'd try downloading and using the freeware program Exact Audio Copy (available now in version 0.99 beta 05) to rip a WAV and open that in Audition.

ITunes will not copy some new cd's cda files?????

My iTunes will transfer some cda files from a new CD. ANy clues on possible causes ????

The .cda files are just tiny (44 byte) index files that are used on an audio CD. They are not the music, although it is a peculiarity of Windows that if you use its file system to look at an audio CD, all you see are the CDA files!
If you are trying to rip/import the songs into your iTunes library, you can use iTunes. Look in iTunes Help at the article "Import songs from CDs."

Convert CDA files using Adobe Soundbooth

In the help file for Adobe Premiere Pro CS3, under "Importing digital audio", it states:
"You can use CD audio (CDA) files in a project, but before you can import them into Adobe Premiere Pro, you need to convert them to a supported file format, such as WAV. You can convert CDA files using an audio application such as Adobe Soundbooth"
Ok, I have Adobe Soundbooth, but I can't find out any information for how to perform this import. It is a common need that most people have to be able to import music or audio from a CD. Can anyone provide the method of performing this action using Adobe Soundbooth?
Thanks in advance for your help.
Andy

http://www.adobeforums.com/cgi-bin/webx?128@@.3bc4f7a9 is a recent discussion of this subject here. Looks like the documentation you quote is wrong!

How can i convert a .cda file to an mp3 file

how can i convert a .cda file to an mp3 file

Actually, CDA only represents a shortcut of audio track. In reality, it does not have any music file in it. That's the reason why you cannot play the files without the original CD in your computer drive. To solve this problem, you'd better convert your CDA files to the most common mp3 format. To know more about how to do that, you can refer to this article, hope it helps!

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

"Cannot open Help. The file cannot be found." Error on Treo Pro

I can see a support item listed on my phone when I try to search the Help files, but when I click on that item, it gives me an error message, "Cannot oepn Help. The file cannot be found."
I am trying to block telemarketer calls, and it looks like there is a way to do it. Two help references come up - "Setting Options for rejecting calls" and "Blocking Calls." I just can't access them.
Thanks in advance!
Shan
Post relates to: Treo Pro T850 (Sprint)

From the Owners Guide http://www.palm.com/us/support/handbooks/treopro/treoproT850E_UG.pdf But I dont think its what your looking for.
Setting options for rejecting a call By default, when you reject an incoming
call, the caller is sent to voicemail. You can
change this setting so that, in addition to
sending the caller to voicemail, a text
message opens. This message contains
default text and is addressed to the caller
so that you can send the message right
away. You can also change the default text
of the message.
1 Press Start and select Settings.2 On the Personal tab, select Phone .3 Select the Advanced tab.4 To turn on the text message feature, check the Reject call with text
message box.
5 (Optional) To change the content of the message, select the text in the box and
enter the text you want.6 Press OK .

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

Help using jar file!

Help using jar file!
Hello
I have created a jar file by using
jar cvmf Manifest.txt myjar.jar 1.class Mydirectory
In 1.java file :I have used
JEditorPane editor;
editor.setPage(getClass().getResource("/Mydirectory/default.htm"));
If I am only giving myjar.jar file to the client without Mydirectory then also it is working fine by showing default.htm in JeditorPane.
But my problem is I want to use
Runtime.getRuntime().exec("cmd /c start IEXPLORE"+targetstr) ;
targetstr will be the filename with path of the default.htm
If I am giving myjar.jar file with Mydirectory to the client it is working but I don't want to give Mydirectory to the client .
What should I do?
Is there any solution for this?
Using another jar file which will include mydirectory can solve this problem?
Is there any othe concept in java so that I wll be able to hide Mydirectory from client?
Please help.

It seems like you could extract the .htm file from the jar, either with Runtime.exec or using the Jar API classes.

Where can I get help re: a file missing from Pages in iCloud?

Where can I get help re: a file missing from Pages in iCloud?

If the file was also on a mac, then there was a local copy of the file in ~/Library/Mobile Documents. If you use Time Machine or any other backup program on your computer, then try restoring the file(s). Similarly the same thing would be done on a PC, but I'm not sure where the icloud local copies are kept.

I want to move my iweb domain files to another computer, I read the directions in help but the file isn't where it says it is, can anyone direct me?

I want to move my iweb domain files to another computer, I read the directions in help but the file isn't where it says it is, can anyone direct me?

Where are you looking?
Here:
User>Library>Application Support>iWeb
Keep in mind that your Library folder is hidden by default in Mountain Lion.
To find it, hold down the option key and choose the Go menu in the Finder.
You might also want to try posting your question over in the iWeb area.
https://discussions.apple.com/community/ilife/iweb
Matt
Message was edited by: Matthew Morgan

Problem playing Audio CD (.cda files) on Windows Vista

Hey,
I am having problems playing an Audio CD. On XP everything is working fine. On Vista, the files seem to be playing, but I am not getting any sound (playing .wav files for example is also no problem, it's just the cda files from an audio cd).
This problem does not only occur in my own code, also the JMStudio application produces no sound playing tracks from the cd.
Is there anything that needs to be configured in Vista in order to make that work?
Thanks a lot,
sirpreis

I should point out there's no such thing as playing a CDA file. CDA files are simply indexing information about where to find the actual track data on the disk.
My best guess is that Vista's sandbox won't let Java go and fetch the actual audio tracks from the CD, because it's more restrictive than Vistas.
Other good guesses would including that whatever native code JMF uses to fetch CD audio works in XP but it doesn't work in Vista. That would certainly make sense...
If JMStudio doesn't work, your code probably wont ever work either. Sorry :-/

.cda file?!

Hi Everyone...
So my boss sends me a file of SMPTE time code encoded as a .cda file. Anyone know of a good converter (preferably free) that will convert this to .mp3, .wav, .aiff, anything usable...?
Thanks

http://www.fileinfo.com/extension/cda
A .CDA shortcut file is a small file generated by Microsoft Windows for each track on an audio CD. The file contains indexing information and are named in the form TRACK##.CDA. The files contain no audio and are basically useless when a CD is ripped to a computer's hard drive or converted to MP3 and written out as files to a CD. Some software makes it appear the files contain audio as recorded material starts when a .CDA file is clicked on but that's just the software operating and not music in the .CDA file.
Ask him to send you the data as a CD, or have him convert the audio data to some generally recognizable format such as WAV or AIFF.

F4 Help for Logical file

Hi All,
i've declared a parameter where end-user can specify the logical file name. can anyone provide the code for F4 help for logical file name.
Regards
Faisal

Declare this :-->
PARAMETERS: p_apsvr LIKE rlgrap-filename OBLIGATORY.
AT selection Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_apsvr.
PERFORM get_apsvr_path.
FORM get_apsvr_path .
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = p_apsvr
      filemask         = '*'
    IMPORTING
      serverfile       = p_apsvr
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_apsvr_path

Large file handling tips Help for illustrator file larger than 3 gb

Can anyone provide advice for large file handling tips. Help for illustrator file larger than 3 gb ie how often, when, and should I clear the clipboard? are here other tips?
Thanks,
Gavin

My key tip is to EXPECT corruption. Keep every save separately so you can go back before damage (which might not be visible). Don't just keep a single old file or rely on daily backups.

Help on cda files

Similar Messages

Maybe you are looking for