Help on Converting clips so you can do the clip in reverse or slower mode
I am wanting to add the slower effect to one of my clips. But when I double click the section I want to have the effect on, it says you must convert this clip to make it run in reverse, slow, or faster.
How do I go about converting it so it could run in reverse or slow mode. I don't have an idea of where I am supose to convert and how. Thanks for any help in advance.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
Check if there is an update available for your graphics display card driver.
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
Similar Messages
-
.
Hey,
If you double-click on the soundtrack you can open it up in the inspector tab and lower the soundtrack so that you can hear the audio from the video clip.
A great resource for finding answers to questions like this is http://www.imovietutorialhelp.com
You can ask questions just like these and they will be answered for you. If you need a tutorial video made or anything like that, you can go there as well and ask for a video to made as well. Check it out.
If you still have questions on how to do this, they can help you for sure.
I may receive some form of compensation, financial or otherwise, from my video or link. -
Font Size
You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email.
Privacy Policy
Advisor [4:49 p.m.]:
Hi, my name is Jacob. It'll be just a moment while I review the comments you provided.
Advisor [4:49 p.m.]:
Hello Machelle, how may I assist you today?
Customer [4:51 p.m.]:
Can you please help me recover the new testament of the bible from media group. The have vanished.
Customer [4:52 p.m.]:
I need to recover the lost purchases I made from media group. I had all of the new testament.
Advisor [4:53 p.m.]:
Thank you for this information, I understand that you are missing some purchases. I do want to apologize for this inconvenience. I will be more then happy to look into this for you.
Advisor [4:53 p.m.]:
Would you be able to provide your Apple ID? This is the email used to sign into the iTunes store.
Customer [4:54 p.m.]:
[email protected]
Advisor [4:54 p.m.]:
Thank you, one moment please.
Advisor [4:56 p.m.]:
Were these individual purchases? If so could you provide the name for each individual purchase?
Customer [4:57 p.m.]:
yes it the new testament books of the bible
Customer [4:57 p.m.]:
genesis etc...
Advisor [4:58 p.m.]:
I apologize, but I am not exactly familiar with the New Testament. Would you be able to provide these names for me so I can locate them on my end?
Customer [4:59 p.m.]:
Genisis Mark Matthew Luke John
Customer [4:59 p.m.]:
Exodus Levitus Numbers
Advisor [5:00 p.m.]:
Just a quick question, were these all audiobooks?
Customer [5:00 p.m.]:
Duetoronomy
Customer [5:00 p.m.]:
Yes from media group
Advisor [5:00 p.m.]:
Okay, are you currently on a computer with iTunes installed?
Customer [5:01 p.m.]:
yes
Advisor [5:02 p.m.]:
Unfortunately, audiobooks and ringtones are the only items on the iTunes store unavailable for re-download through iTunes in the Cloud. What I can go ahead and do is try and re-add these audiobooks back to your download queue for re-download. Please note if they have been removed or modified on the iTunes store they may not be available for re-download. Would this be okay?
Customer [5:03 p.m.]:
yes thank you!
Advisor [5:03 p.m.]:
Excellent, one moment please.
Advisor [5:05 p.m.]:
I apologize but after reviewing your account, it looks like we have already issued 3 exceptions for you to re-download your audiobooks in the past. Back on 02/23/2013. I apologize but we will be unable to do another exception for you.
Customer [5:06 p.m.]:
that down load did include the new books of the bible that I had.
Customer [5:07 p.m.]:
that down load did not have the new testament books of the bible that I had
Advisor [5:07 p.m.]:
While reviewing the notes, this was issued to add all available audiobooks bought on your account. I again apologize but I will be unable to issue another exception to you. As the previous advisor did inform you to make sure to back up your files.
Customer [5:08 p.m.]:
the other advisor did not down load the new testament books. The advisor did not restore all of the books that I had originally brought.
Advisor [5:10 p.m.]:
While looking closer, the books that you are missing are no longer available to be re-downloaded. This is the reason why they were not added back to your download queue when he issued them. Unfortunately, as we do not handle the content on the iTunes store you will need to get in contact with the publisher of the content as they were the ones two remove or modify these books on the iTunes store. If you would like I can provide a link to their support site.
Customer [5:11 p.m.]:
yes they are I saw them.
Advisor [5:11 p.m.]:
They may have been modified by the content owner. This will be the reason why they were not added. As Apple does not control 3rd party content on the iTunes store. You will need to get in contact with them as we are unable to re-add this content back to your download queue.
Customer [5:12 p.m.]:
it is I just looked at it in the itunes store
Customer [5:13 p.m.]:
the material is still the same. The store does have it.
Advisor [5:13 p.m.]:
Machelle, if the items have been modified since you bought them, they will be unavailable for us to issue them back to you. You will need to get in contact with the providers for these books as they are the content owners and we do not have access to issue these back to you.
Customer [5:14 p.m.]:
the are still the same bible books that I purchased at the store.
Customer [5:14 p.m.]:
The audio books are the same. When I buy it again nothing will be different.
Advisor [5:14 p.m.]:
Machelle, I understand this. This is what our records are showing. When the previous advisor tried to re-issue them to you they were unable to as they have been modified on the iTunes store.
Advisor [5:15 p.m.]:
In order to receive further support for this issue you will need to get in contact with Media Group as they are the content providers for these audiobooks.
Customer [5:15 p.m.]:
I will buy them from another source. Don't say they have changed. The books are the same books I brought. They are at the store.
Advisor [5:16 p.m.]:
Machelle, Apple does not handle the content for 3rd party publishers on the iTuneMoonSwan wrote:I've never heard of a validating editor but I was recently wondering what exists that could help me. Aside from emacs, what should I search for to find one of these validating editors?
You can use whatever tool you prefer - for someone already using emacs, emacs is a natural choice. Simple, easy to use online tools exist e.g. http://schneegans.de/sv/
Just upload the file in question ('Validate by file upload' option) and click 'Validate':
The '=' character cannot be included in a name. (723:10)
<Terminal="Terminal">
^
Googling 'xml validation' should give you some more tools / services if this one is not good enough. -
i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?
Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work? -
Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.Please try turning off
Window > Application Frame -
aim trying to put 2 audio clips together and you can hear the unnatural break. Is there a transition I can insert to cover it up. Kind of like we do with video clips? Like an overlay? Thank you
You could put the two clips on two different tracks with a slide overlap and fade the first clip out out and the second clip in.
Or trim both clips in a way, that the first clip ens with silence and the second clip starts with silence. -
My ipad suddenly cannot connect to wifi internet,you can see the icon that its connected but most of the apps are not opening with message not connected to internet...
Please your suggestions / help are very much appreciated
ThanksTry This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings. -
I tried exporting my film, but it wouldn't export. So, then I tried rendering all of the clips. However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?
What version is FCPX and what version is your OS?
How are you exporting and with what preset?
Luckyl1987 wrote:
However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?
No idea about that.. Can yu post a sreen shot of the error message?
Russ -
So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
i have an ipod tough 3g and its like about 4 to 5 years old it works perfectly fine except the home button is abit messed up and the ipod sometimes crashes. but other than that everything is fine. so i was watching something on an app and then al of a sudden i dont see the video i can just hear it. i then think its just the app but when i go on youtube the same exact thing happens. you click to watch a video and you can hear it perfectly but you cant see anything. the screen is just black when u ONLY watch a video. this happened last night so yea.i really hope somebody can help me figure out how to fix this and whats wrongwith it:)
thanks for your time and help!
Noor .T.When it goes black do a very short press of the button on the right upper side of the phone and the screen will reappear. Make it a very short quick press.
OTOH, if you are using the speaker so you can watch the screen as you are talking when it goes dim touch the screen anywhere that it is blank and it will again go bright. On long calls you have to repeat this.
Many folks have had the same problem you described and what I have told you is the best and ONLY way around the screen going blank during a call.
JerryF -
The exact and full message is:
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: https://fbstatic-a.akamaihd.net/rsrc.php/v2/yk/r/w50KHoJTfoZ.js:26
so, I have read the many other threads on this problem:
1. I just installed firefox for the first time - this happens on facebook and many other sites
2. I have reset firefox - did not fix the problem
3. I have checked all my extensions and plug ins for up to date
4. I turned off hardware acceleration
5. I tried disabling all my plug ins
6. I used to use firefox, but it started doing this and I was never able to resolve this and went to chrome.
I am using Win 7. No problem, ofr the most part, using IE or Chrome, I just wanted to try firefox again. Does it not work with win 7?You can try to clear the Flash local storage and settings if the problem is with the Flash plugin.
*Windows Control Panel > Flash Player > Storage: Local Storage Settings
**Remove a specific domain: Local Storage Settings by site
**Remove all domains: Delete All and Delete Data
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html -
My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!
Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this. -
You can bridge the Fios Quantum Gateway Router
Long story short. I could not figure out how to disable SIP on the Fios Gateway Router and some my Intercom Video Door station in use by my Control4 uses SIP. The router was causing conflicts and Control4 advised that SIP needs to be disabled on the router. Disabling SIP is a very common answer to people using IP based video conferencing or VOIP phones. That left me with 2 choices. Get the Fios Quantum Gateway to bridge and install my own router where SIP can be disabled, or get rid of Fios and use an ISP that does not require a combo "modem"/router. I didn't want to give up on Fios so easily. My installation was new and I am happy with the uptime and performance. I spent 2 days trying to get my Fios Quantum Gateway to Bridge. I am writing this up so that someone else doesn't have to live the pain I've lived. First up, after multple days of looking, their are limited instructions on getting the Fios Quantum Gateway router to bridge. The instructions you can find are for the Actiontec router. It's "almost" the same router but not 1:1. Most step by step guides say that the steps for the Actiontec will work for a FIos Quantum Gateway. That's not inaccurate, but isn't fully accurate either. Their are steps involved in the Acitontec instructions that do not apply to the Fios Quantum Gateway. First - this link is the baseline instructions I found that mostly work: http://www.dslreports.com/forum/r27666920-How-to-Make-Actiontec-MI424WR-Revision-I-Rev-I-a-Network All credit to the authors that came before me. I didn't discover these steps. I hijacked them and tested them with some revisions for a Fios Quantum Gateway router. I take not credit or responsbility for any action you take based on my post. It "works for me" and continues to work after 24 hours. My please note that I am using Coax/MoCa from the ONT to the Router and that Ethernet was not an option. I am going to repost the steps verbatim, but add some notes along the way where my experience was different in bold. I highly recommend you read the entire thing one time before starting with the step-by-step. You can replace the word Actiontech with Quantum Gateway in the below. Their are subtle differences in termonligy between the Acitontec and the Quantum. If you see a step in the guide and can not follow because your Quantum doesn't have the same display, you must find the nearest equivelement or ignore it entirelly. First get your Router and Actiontec set up like so: ONT -> Coax -> Actiontec Coax Port -> Actiontec LAN Port 1 -> My Selected Router WAN Port. Unplug the cable from the WAN Port, but keep it nearby. I was actually in LAN Port 1 on the Quantum Gateway but I don't think it will actually matter.
Now we need to obtain the WAN MAC address of each Router device.
For the Actiontec go to: Top Menu – Advanced – MAC Cloning – Set Mac of Device – Broadband (Coax). Here you should see the MAC Address, write this down on a paper or something. This is critical. You need to do this. Without the clone, I was unable to bridge. Note that I did not have to STAY cloned. I just had to clone until the lease expired even though I believe I had released the IP successfully. For your own router: You need to look this up yourself. The ASUS RT-N56U (w/ custom firmware) has a spot that just displays my WAN MAC address for me. I'm using an EdgeRouter from Unfi. Nobody can help you here except the forums for the router you are using because how you do this is different from router to router (generally speaking.)
Once you have both of these pieces of information, it is time to start.
1. Hardware Reset Actiontec Router I wouldn't do this. I didn't. I would actually save a copy of the configuration you have on the router before going any further, in case you have to hardware reset and restore your router.
2. Log into Router using [ admin/password ].
3. Change admin login info and set a different password. There should be a link on the side.
4. Top Menu – My Network – Side Menu – Network Connections – Network (Home/Office) – Settings – IP Address – Setto 192.168.x.1 where x is not used on your LAN – Apply
*NOTE*: Upon changing the default gateway IP of the Actiontec from 192.168.1.1 to 192.168.x.1, you will need to [ ipconfig /release ] and [ ipconfig /renew ] from Command Prompt, so your computer can quickly reconnect to the Actiontec. I changed this to 192.168.0.5 because my DHCP starts at 50. The Fios default is 192.168.0.1 and not .1.1.
5. Log back in to Actiontec router with new IP and new password you previously set.
6. Top Menu – Wireless Settings – Side Menu – Basic Security Settings – Wireless Off – Apply 7. Top Menu – Firewall Settings – Side Menu – General – Minimum – Apply
8. Top Menu – My Network – Side Menu – Network Connections – Advanced 9. Top Menu – My Network – Side Menu – Network Connections – Broadband (Coax) – Settings – Release – Apply
*NOTE*: If your IP address is not released properly you will need to wait 2 hours for your lease to expire or you’ll need to call Verizon Tech and get them to restart your system.
10. Broadband (Coax) – Settings – IP Distribution – Disable – Apply 11. Broadband (Coax) – Settings – DNS Server – No DNS Server – Apply 12. Broadband (Coax) – Settings – IP Address – No IP Address – Apply
13. Top Menu – My Network – Side Menu – Network Connections – Network (Home/Office) – Settings – IP Distribution – Disable – Apply 14. Network (Home/Office) – Settings – DNS Server – No DNS Server – Apply 15. Network (Home/Office) – Settings – UNcheck Box to Left of Wireless – Apply
*NOTE*: The old guide will tell you to uncheck the box to the left of “Coax” here. Unfortunately, in the Rev. I, Ethernet and Coax are stuck together as “Ethernet/Coax” and you can’t split the two. If you uncheck the box to the left of “Ethernet/Coax”, you will lose connection with the Actiontec Router and you will be forced to hard reset and start all over again.
16. Network (Home/Office) – Settings – Check Box to Left of Broadband (Coax) – Apply 17. Network (Home/Office) – Settings – Check STP Box to Right of Broadband(Coax) – Apply The Quantum Gateway didn't have an STP box to uncheck. I ignored this step with no adverse effects. 18. Network (Home/Office) – Settings – Network – Broadband Connection – Apply
19. Top Menu – Advanced – MAC Cloning – Set Mac of Device – Broadband (Coax) Using the information you gathered at the beginning: a. Set the WAN MAC of your selected Router to the MAC address listed here. b. Set the Address here to the WAN MAC of your selected router that will be connected to the Actiontec to avoid conflicts.
20. Plug the cable from Actiontec LAN Port 1 to your Routers WAN Port. Your router should be getting a WAN IP from Verizon. Test to make sure your WAN is established and that you can connect onto the internet, browse pages. Run a speed test to make sure everything is peachy.
*NOTE*: If your router did not get a WAN IP, you have a problem. I would recommend trying to re-trace your steps to see if you missed anything or just start all over and hard reset. :\
21. If everything worked out fine, connect a cable from your Router’s LAN Port 4 to the Actiontec LAN port 4. Again, I was using Port 1. But it shouldn't matter. I haven't tried other ports.
22. Power cycle your STB if you wish. You should see your STB show up in your DHCP list and it should be getting VOD/Widgets. This wasn't neccessary for me as I don't use Verizion TV service. Your millage may very. -VNOTE: about bridging the Quantum Gateway G1100 Information about this is in DSLReports.com - Verizon FiOS FAQ. SEE: Verizon Online FiOS FAQ -> 3.2 Moca -> Can I get an ethernet connection in a room with only coax? There is a list of instructions for bridging routers, but the Verizon Quantum Gateway is not included there. Follow down the instructions and at step 2.5 here is added information that is not in the FAQ yet.
Instruction 2.5...
2.5a) The Verizon Quantum Gateway G1100 is slightly different from the Actiontec MI424wr. If your primary router's broadband connection is provisioned over coax, you need to disable the remote router's coax WAN connection to prevent it from attempting to become the primary router. If your broadband connection from the ONT to your primary router is ethernet, this step may be unnecessary.
Click on the MY NETWORK icon at the top.
Select NETWORK CONNECTIONS from the menu on the left.
If you’re using the Verizon Quantum Gateway G1100 as the remote router the Network Connections panel will show Broadband Connection (Ethernet/Coax) instead of Broadband Connection (coax).
Click on Broadband Connection (Ethernet/Coax)
The next panel displays Broadband Connection (Ethernet/Coax) Properties as its title. There is a Disable button at the top of the panel. There is also a Settings button at the bottom of the panel. You will come back to the Disable button.
Click on the Settings button.
The next panel displays the same title as the prior panel: Broadband Connection (Ethernet/Coax) Properties
In the middle of the panel next to the heading Enable/Disable Coax Link: there is a button labeled Disable.
Click on Disable.
Click on the Apply button at the bottom of the panel.
You will be taken to the Broadband Connection (Ethernet/Coax) Properties panel that you saw before.
At the top of this screen there is a button labeled Disable
Click on Disable
Click on the Apply button at the bottom of the screen. -
I was trying to sync a song from my computer to my iPhone 4 using iTunes and it said you can transfer the music from your phone to your itunes if you want to sync it so I did and none of my music is on my phone or on itunes besides the song i was syncing
Hi Soccer4461,
If you need to update your iTunes software, you may find the following article helpful:
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/ht1338
Regards,
- Brenden -
Help i clicked something and now my big wont show up big.. its there but black.. you can see the names that are tagged but no pic.. ive tried view ect but nothing
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Maybe you are looking for
-
Unable to load mySql Driver in Java class invoked using bpelx:exec
Hi , I am trying to connect to mysql database in my java class.when i run this class in Jdeveloper it loads the driver without any problem.I can chk the log in the Jdev messages area.Now I am invoking this class from the BPEL process through <bpelx a
-
Hello World, I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mat
-
Please Help! New Cam - Seems to Be Locked
Hi allI have the Creative Live Cam Optia #4 - Creative Live Cam Center version .3.0 running on Win XP. I have a basic problem. The cam doesn't record any images - ie it won't display my pic even when the cam is pointed at me - the screen has a lock i
-
I just recently purchased a 5G 30 GB. When I go to 'settings' and then to 'about' my capacity says 27.8 GB. Shouldn't the capacity be 30 GB? I'm wondering where the other 3 GB went. Any ideas? HP Windows XP
-
SQL Query to fetch a specific field in xml
Hi, Below is my sample Xml file. <?xml version = "1.0" encoding = "UTF-8"?> <methodCall xmlns = "http://www.tibco.com/schemas/CS4_new1/Schema.xsd" xmlns:xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation = "http://www.tibco.com/sche