Help on creating size of image

Hi everyone, im farley new to illustrator and the whole process of editing images.
I voluntered for school to maker a banner that is 240inches by 12 inches, I thought it wouldn't be too bad considering ive made one in the past that was 40inches by 12inches. So Im trying to make a banner that is 240inches by 12inches with a .5 inch bleed around all sides. When I type in all the sizes it says im unable to make an image that big.
Is there a way I can make the image 240 inches? Does it have something to do with the number of artboards?

No, the maximum working area in AI is 227" square, so you will have to work a scale (say 1:2) and print it at 200%.

Similar Messages

How can I create a one image per page caption sheet that includes the description in Bridge?

I am trying to find a way to create a one-image-per-page caption sheet for my workflow. I currently place each image into Word and copy the description onto the document, then repeat for each image. I am hoping that there is a way to automate this process using Bridge. I know that it can be done using Lightroom, however, that is not currently an option for me. Is this something that can be done or am I bound, like Sisyphus to Microsoft Word? I have a very limited grasp of scripting, but I feel like this is possible.
Thanks for any help.

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

Qosmio G35: How to create Qosmio Player image CD

Hello,
I'm from Brazil and i have a Qosmio G35 AV600.
A month ago, i deleted all my partitions and after i reinstalled the OS i realized that QosmioPlayer was missing.
Searching the web i found out that i need the Qosmio Player Recovery CD to reinstall the linux based software.
I called 10 times at the Toshiba Support Center, opened a ticket and all the times i have been informed that the
International Consumer Relations would call me in 1hour.
Anyway, can somebody help me creating an ISO (image) from the real CD and UPLOAD the image into a GMAIL account or somewhere else?
I really appreciate that.
Thank you...

Almost got it.
I have downloaded your file MRG, burned into a disc, but when i tryied to install, the following message: "Your system does not support Qosmio Player" pop out into the window.
What is the version of your Qosmio?
I think that this version is not compatible to my G35 AV600.
Can somebody, who have a Qosmio G35 series, could help me? Send me a QosmioPlayer Recovery CD nero image or iso image..
My email is: [email protected]
Thanks for your patience!
Daniel

Need help to create report with jpeg/gif image

Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
John

Hi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John

How do you create a disk image of windows so u can increase partition size?

Ok, I have installed windows on my mac using bootcamp so i can play pc games and such. I mainly use the mac side of the computer but I have 30 GB devoted to windows. I ran out of space though and now want to uninstall windows so i can make the windows partition bigger. The problem is that I don't want to have to install ALL of my programs over again once i reinstall windows so I want to take a disk image of windows which i can revert to once it is reinstalled. I tried using the disk utility to do it but it keeps giving me error messages. Does anyone know how do create a disk image using windows??? or maybe I'm doing something wrong with the disk utility??? HELP!

The easiest way I have found to do this is to backup the windows partition with a program such as WinClone
http://twocanoes.com/winclone/
Then use the bootcamp assistant to erase and recreate the partition, finally restoring the backup to the new partition. I have done this several times with my mac and it works great.

Help needed to create a Background Image

I have a mobile project and want to create a background image which is visible below some text.
My firstview file is as follows:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView"
                    skinClass="skins.mySkin" backgroundAlpha="0">
<fx:Declarations>

</fx:Declarations>
          <s:Label x="2" y="86" text="Here's some Text" />
</s:View>
With mySkin (in the skins folder) as follows:
<?xml version="1.0" encoding="utf-8"?>
<s:Skin name="CustomApplicationSkin"
                    xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark">
<fx:Metadata>
                    <![CDATA[
                    [HostComponent("spark.components.View")]
                    ]]>
</fx:Metadata>
<s:states>
                    <s:State name="normal" />
                    <s:State name="disabled" />
</s:states>
<s:BitmapImage width="10%" height="10%" source="@Embed('/images/myImage.jpg')"/>
          <s:Group id="contentGroup" width="10%" height="10%" minWidth="0" minHeight="0" />
          <s:ViewNavigator id="navigator" width="10%" height="10%" />
</s:Skin>
When I run the project, I cannot see the Label text (although the backgroundAlpha is set to zero).
First time I've tried a skin, so help would be appreciated and hopefully.
Thanks in Advance

A small change to the mySkin file as follws wored:
          <s:BitmapImage width="100%" height="100%" scaleMode="letterbox" horizontalAlign="center"
                 verticalAlign="middle" source="@Embed('/images/myImage.jpg')"/>
          <s:Group id="contentGroup" width="100%" height="100%" minWidth="0" minHeight="0" />
I took the ViewNavigator line out.

I have Lightroom 5 and am trying to create some HDR Images for my Real Estate Business. I do not have the option to even be able to stack my photos. My headings are: Lightroom- File-Edit-Window-Help. Why does it not give me the option to be able to Stack?

Can i stack JPEG images or do they have to be Raw Files? The other help videos I have seen have the shortcut CommandG to stack, mine does not respond that command nor do i have a heading labeled Photos.

In order to stack images they must be all highlighted as a group. And the group must be contiguous, in other words next to each other. However, if you are talking about stacking images for the purposes of creating an HDR image, that cannot be done using Lightroom. You will need Photoshop or some other software with HDR capabilities in order to do that. It is possible to stack any file type or combination of file types, including virtual copies.

Best way to create a background image for all resolutions without drastically increasing file size.

I see a lot of great background images with complex designs that resize with different screen resolutions. I can create the designs, but I don't know how to create a complex image for large screen resolutions without making it a large file, or it loosing quality with it stretches to the larger size. Is there a code that resizes images when stretched, or do I just have to live with a slower load speed with complex background images?

The background doesn't resize, it shrinks:
http://johnpatrickgiven.com/jquery/background-resize/
Basically make a 1920x1080 or higher resolution file and use that script. There will always be a maximum but based on your response that is not your monitor. Photoshop and other tools do a pretty good job compressing jpeg files and most internet connections are fast enough to make it seamless.

HT1198 I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

Done. Thank you, Allan.
The sparse image article you sent a link to needs a little updating (or there's some variability in prompts (no password was required) with my OS and/or Disk Utility version), but it worked.
Phew! It would have been much more time consuming to use Time Machine to recover all my photos after repartitioning the drive.

What size still images work best for iMovie to create a book trailer?

I'm trying to create a book trailer using still images and text in iMovie. I purchased some 280px images from gettyimage and find they are too small. When viewed on a full screen the images are degraded. What size still image works best to make a book trailer in iMovie that will be posted on You Tube. Thanks in advance. I am an iMovie newbie.

iM supports a max. export resolution of 1920x1080 pixel ..
if you need to add Ken Burns effects, res should be, of course, higher..
no such thing as 'dpi' with video, only absolute pixels count ..
due to the many conversion processes happening on import, processing and export, care for as less compression as possible for the imported files ..
this YT-demo is done in iM09 with some pics from my Lib, native res of originals is ~6Mpix/~3MB size/jpegs ..
ahh, and Welcome betinski61 to the  iM boards ...

Error in creating an HDR image in photoshop using light room. Help please.

Hi so I am trying to create an HDR image using the latest version of photoshop and light room.
Just finished doing all the steps needed before I select my images and click (edit in > merge to HDR pro in photoshop ) it opens Photoshop and gives me an error saying "Merge To HDR.jsx could not be found." and my files don't open. what does this mean and how do I fix it?

difficult to reproduce. But it might be a data conversion problem.
e.g. try
to_char(a.num_tabs)If that's not the error comment out certain lines or xmltags and test which one is the reason for the error.
Edited by: Sven W. on Sep 9, 2011 3:13 PM - typo correction

Help creating custom menu images

Hi,
I've been struggling while trying to create original menu images. I've placed .png images on my page and chose the page they should link out to and I've also added states to each object but when I preview, they don't link out or show any of the states. What am I doing wrong?
Here's an image:
Thank you!

Could you publish your Muse file to Business Catalyst as a trial site and share the URL so we may check what exactly is preventing the link to work as expected.
Thanks,
Vikas

Help creating a netboot image for Panther in SIU

Hi!
I have an old iBook G3 that has a broken CDROM drive.
I want to install Panther on it, so I'm thinking to netboot it from my SNow Leopard server.
I tried creating a netboot image from the original Panther CD, using the System Image Utility in SL but it seems I can only create images of Snow Leopard.
This limitation seems strange.
Is there a way to create a netboot image from my Panther CD and use it to beet my ibook ?
Any information online on how to achieve this?
Thanks
Mike

Thanks Antonio !
That's a really good answer.
I just need to add some more info:
I downloaded the Server Admin tools from the link you gave me but it would not install on 10.6.1 Server nor on 10.5 client.
I get the error:
"You cannot install Server Admin Tools on this volume. You are not allowed to install the software on this disk for an unknown reason."
Thus I extracted manually the System Image Utility from Installers/Packages/ServerAdminTools.pkg/Contents/Archive.pax.gz
The application runs fine on Leopard client and SL server.
I just need to figure out now how to boot my iBook.

How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

Hi There, I have just bought a new 2013 iMac.
Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp? I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
Thank you. Joe

Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Size of image is getting increased

Hi
I have cross compiled BDB using m68k-elf toolchain.
I'm using motorola coldfire processor with uClinux for our development purpose. Now I need to include BDB into uClinux and flash it into our processor. The flash we are using is 4mb. The image I have built (without BDB) was around 1.3MB. But if I include BDB libraries and make the image, the size of image is 11MB. How can I come out of this problem
After i cross compiled BDB, I have taken the library files created ( libdb.a, libdb-4.5.a ) into romfs/lib and binary files (db_archive, db_dump,db_load.........) into romfs/bin of uClinux distribution and made the image.
I fell that it is not the right process but dont have any idea how to go with. Image size should be less. Can anyone help me
Thanks inadvance
elizabeth

Hi Elizabeth,
Another possible cause of your problem is that you are building static libraries. Each time you link against a static library (in this case the Berkeley DB library for each utility), the footprint of the library is added to the size of the application being built.
You should probably configure Berkeley DB with the "--enable-shared --disable-static" flags. That will generate libdb*.so files not libdb*.a files, and the resulting utilities should be significantly smaller.
Information on static libraries here:
http://www.linux.com/howtos/Program-Library-HOWTO/static-libraries.shtml
Information on shared libraries here:
http://www.linux.com/howtos/Program-Library-HOWTO/shared-libraries.shtml
Regards,
Alex

Help on creating size of image

Similar Messages

Maybe you are looking for