Help On ECC 5.0 - ADDRESS_SEARCH BAdI, Field XDFADR on BUT020

Hi,
1. Is there a way for us to set the flag IM_DIALOG_ALLOWED on the BAdI ADDRESS_SEARCH to 'X'? We need to set it to an 'X' even before the BAdI gets called. I know that its default value is already an 'X,' but whenever our ADDRESS_SEARCH BAdI implementation is called, SAP seems to set it to SPACE. Do we need to configure something?
2. We noticed that whenever we create a Business Partner address and check its entry in BUT020, the field XDFADR is not set. This field is supposed to be the flag that specifies that the address is the standard address right? When we look at the address overview of the record, it says there that it is the standard address. Do we need to configure something for this?
Thanks! Hope to hear from any of you soon.

Hi Paul,
Where you able to figure out how the field XDFADR in But020 can be set to 'X'.
We have a similar requirement. Please let me know in case you have any information on this.
Warm Regards,
Anushree

Similar Messages

Help in ECC 6.0 - Enhancements and Modification with BADI

Hi,
I want Enhancements and Modification help in ecc 6.0 and BADI also..
Plz tell me as soon as possible....
Regards,
Anil Kumar

Try this one:
http://help.sap.com/saphelp_nw04/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
Regards,
Naimesh Patel

After upgrade from 4.6c to ECC6.0 F4 Help is not coming for few date fields

Hi Friends
Just now we have completed upgrade project from 4.6c to ECC6.0.
After upgrade F4 help is not working for some date fields.
For example its working in MB11,Its not working in va01,vf01 like that.
In abap side we checked ...not able to find any issues in coding level, because its a standard SAP code.
So if any solution is there to correct this issue.Kindly help me to resolve this asap.
Thanks
Gowrishankar
Edited by: gowrishankar p on Nov 17, 2009 7:25 AM

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

BAdI: Field LIFNR not ready to accept input (Change will not be adopted)

Dear Guruz...\
given below is the warning with message number
BAdI: Field LIFNR not ready to accept input (Change will not be adopted)
Message no. MIGO050
while i am trying to enter the batch name for removal for scrapping and clicking check this warning is being displayed.
KIndly if you are having any other solutions in customizing other than using BADI... pl discuss..

Hi,
You must have some kind of BAdI (probably MB_MIGO_ITEM_BADI och MB_MIGO_BADI) that places a value in the field LIFNR (vendor). However, this field is not open for entry and hence SAP ignores the value provided by the BAdI.
Either correct your BAdI so it doesn't populate the field when the latter is not available (e.g. based on the mvt /special stock ind.) or live with this warning message - it is harmless.
BR
Raf

How is "most helpful" determined in App Store Reviews sort field?

How is "most helpful" determined in each apps Reviews sort field In the App store? I use this field to help make decisions. I like to see how buyers feel about their purchases. But, as a buyer, I've never been asked which review I consider most helpful.
I'm finding some really poor apps with high ratings. Help, please! If this has already been answered, I was directed to begin a new discussion. Thanks!

Yes, most people download from there iOS device. But there are over 1,000,000 who Do it from there computer.
In the itunes store.

Bad Field signature?

Hello,
I'm writing a game for my phone ( Nokia 6800 ), but when I try and test it on my phone or in a nokia emulator, I get an application error "Bad Field signature". It runs fine in the J2ME Wireless Toolkit emulator. What in the world can be causing this error? I have created other midlets to test out the classes I use in my game app, and they will work fine on my nokia phone.
Thanks

Hi,
Perhaps it is related with the obfuscator as shmooved said. There are some obfuscators that includes bad code to avoid decompiling. Your compiler usually will preverify before obfuscate. If the obfuscator you use inserts bad code, it could be that your code is not correct anymore.
Greets.

Data Source - Bad Field Size (Row Number)

Hi,
I get following Exception "Data Source - Bad Field Size" when I run:
oForm_ActivityView.DataSources.DataTables.Item("mtx_C").ExecuteQuery("SELECT...
The Select statement run fine in SQL 2005.
I am using following SQL statement to get the row number:
ROW_NUMBER()OVER (ORDER BY OCLG.ClgCode) AS RowNumber,
If I remove the statement it works fine.
How do I get the row number in B1 to my Matrix?
Thank you,
Rune

I fought with this in the past too and solution for me was:
original query
select ROW_NUMBER() OVER (ORDER BY ItemCode) AS RowNumber, * from oitm
new query
select t.* from (select ROW_NUMBER() OVER (ORDER BY ItemCode) AS RowNumber, * from oitm) t
or convert the rownumber to nvarchar instead of integer as
convert(nvarchar(10), ROW_NUMBER() OVER (ORDER BY ItemCode) ) as RowNumbver
check it and let me know

Please help me to find the table for fields where the descriptions are give

please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicator

You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav.

HELP! I could fill in empty fields in AR last week. Now I can't. OS X 10.9.4 AR 11.0.07

HELP! I could type into empty fields last week in AR, now I can't! OS X 10.9.4 AR 11.0.07

How to share a file: https://forums.adobe.com/thread/1408375

My iphone5 was stolen.. pls help how to deactivate it? badly need your help..

My iphone5 was stolen.. i was slept on the bus, pls help how to deactivate it? badly need your help.. its only two months on me

What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

If you got the question mark and you do not see any partition to install OS X to, it is not good.
Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller.

Screen exit for VL01 in ECC 6.0 using badi's

Hi All,
I got a requirement to create a new tab in VL01 transaction where i need to create one field in ECC 6.0.
Can anyone tell me the complete procedure to create a new sub screen and adding it to the existing standard sap screen as a new tab in ECC 6.0 version.
kindly suggest me how to do this using badi's.

Dear Nicole,
a)SE18:
Definition name               ME_PROCESS_PO_CUST
b)SMOD:
Enhancement     MM06E005
EXIT_SAPMM06E_013
-> If you want to use it, use transaction CMOD to create a
project with Enhancement     MM06E005
Best Regards,
Ian Wong

Help needed for Virtual Key Figure BADI

I am trying to implement Virtual Key Figures via BADI.
Here is what I have done
Define Method
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
Insert Code
CASE i_s_rkb1d-infocube.
WHEN 'ZMCOPA_02'.
l_s_chanm-chanm = '0CUSTOMER'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
APPEND 'ZCPRC_FLG' TO c_t_kyfnm.
APPEND 'ZRTNS_PRC' TO c_t_kyfnm.
ENDCASE.
ENDMETHOD. "if_ex_rsr_olap_badi~define
Compute Method
method IF_EX_RSR_OLAP_BADI~COMPUTE.
FIELD-SYMBOLS <fs_ZRTNS_PRC> TYPE ANY.
FIELD-SYMBOLS <fs_ZCPRC_FLG> TYPE ANY.
FIELD-SYMBOLS <fs_0customer> TYPE ANY.
DATA: l_zv_20dv TYPE curr09.
ASSIGN COMPONENT p_kyf_ZRTNS_PRC OF STRUCTURE c_s_data
TO <fs_ZCPRC_FLG>.
ASSIGN COMPONENT p_kyf_ZCPRC_FLG OF STRUCTURE c_s_data
TO <fs_ZCPRC_FLG>.
ASSIGN COMPONENT p_cha_0customer OF STRUCTURE c_s_data
TO <fs_0customer>.
DATA: l_zrtns_prc TYPE /bic/pzcust_prc-/BIC/ZRTNS_PRC.
DATA: lt_zcust_prc TYPE TABLE OF /bic/pzcust_prc.
DATA: ls_zcust_prc TYPE /bic/pzcust_prc.
IF NOT p_cha_0customer IS INITIAL.
<fs_0customer> =
ENDIF.
SELECT SINGLE *
INTO ls_zcust_prc
FROM /bic/pzcust_prc
WHERE /bic/zcust_prc = <fs_0customer>.
IF sy-subrc = 0.
<fs_ZCPRC_FLG> = 1.
<fs_ZRTNS_PRC> = ls_zcust_prc-/BIC/ZRTNS_PRC.
ELSE.
<fs_ZCPRC_FLG> = 0.
<fs_ZRTNS_PRC> = 0.
ENDIF.
endmethod.
I have commented out line in the Compute method because I was getting an error on my SELECT statement. I think the error is due to the fact that <fs_0customer> is not being populated.
In debug mode, p_kyf_ZRTNS_PRC, p_kyf_ZCPRC_FLG and p_cha_0customer all return 0. Shouldn't they have a different value. I have to admit that I don't really understand how ASSIGN COMPONENT works.
I have defined p_kyf_ZRTNS_PRC, p_kyf_ZCPRC_FLG and p_cha_0customer in the Attribute tab.
Any help would be appreciated. I have spent several hours trying to figure out how this works.
Thanks.
Ryan

Check this if it helps:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c

Query help needed for Sales order panel user field query.

I have a user defined form field on sales order row level called = U_DEPFEEAMT
1, I would like this field to get the value from a field on this sales order row level multiplied by what is in point 2 below. The details of field in point 1 is :
Form=139, item=38, pane=1, column=10002117, and row=1
2. The contents in field 1 should be multiplied by a value coming from another user field linked to OITM master item.
The details of user field attached to OITM is :
OITM.U_DepositFeeON
Appreciate your help.
Thank you.

Try this one:
SELECT T0.U_DepositFeeON*$[$38.10002117.number\]
FROM dbo.OITM T0
WHERE T0.ItemCode = $[$38.1.0\]
Thanks,
Gordon

Need help in parsing a VARCHAR2(4000 BYTES) field

Hi Guys,
Let me give the DB information first:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
My problem is: The frontend of the application sends a large string into the VARCHAR2 (4000 BYTES) field. The string it sends is somewhat like this -
Crit: Some text. Distinguished (points 3):Some comment text1. <blockquote> </blockquote>Crit: Some other text. Distinguished (points 3):Some comment text2. <blockquote> </blockquote>Crit: Some more text. Distinguished (points 3):Some comment text3. <blockquote> </blockquote>Overall comments: Final text!!I want to parse the text and put into separate columns. Number of Crit: can be more than 3; its 3 up there. But the basic structure is same. What is the best possible way of parsing this in PL/SQL code? I want something like
Table 1
Crit Points Comment
Some text 3 Some comment text1.
Some other text 3 Some comment text2.
Some more text 3 Some comment text3.
Table 2
Overall comments
Final text!!Please let me know, if you need further information.
Thanks.
Edited by: 794684 on Sep 14, 2010 4:15 AM
Edited by: 794684 on Sep 14, 2010 4:38 AM
Edited by: 794684 on Sep 14, 2010 4:53 AM
Edited by: 794684 on Sep 14, 2010 6:42 AM

Welcome to the forum.
Looks like noformat tags are not working.Please use the {noformat}{noformat} tag if you want to post formatted examples/code.
For example, when you type:
{noformat}select *
from dual;
{noformat}
it will appear as:select *
from dual;
when you post it on this forum...
The FAQ will explain the other options you have: http://forums.oracle.com/forums/help.jspa

Help On ECC 5.0 - ADDRESS_SEARCH BAdI, Field XDFADR on BUT020

Similar Messages

Maybe you are looking for