Help on either using a DI Box or a Pre Amp?
I recently bought an iMac 3.06 and I was wondering whether i should use a DI Box or a Pre Amp to connect my bass guitar through the Mac. I have no idea what I am doing any help would be great!
Thanks Nick
Hi Nick
Welcome to Apple Support Communities
Actually there are a couple of inexpensive little gadgets that will allow you to connect your guitar to the iMac.
An [MXL iBooster Guitar|http://pro-audio.musiciansfriend.com/product/MXL-iBooster-Guitar-and-Mic rophone-Interface?sku=243800] to the 3.5mm Input Jack.
Or a [Griffin iMac|http://www.griffintechnology.com/products/imic> to a USB port.
Dennis
Similar Messages
-
Using a mixing board as a pre amp?
Hey all,
I have a decent little M-Audio audio interface but I'd like to record more than 2 real instrument tracks simultaneously for a recording session. I believe I can record up to 8 real instrument tracks at any given time with GB3 and was wondering if I am able to use a mixing board as a pre amp much like my audio interface? If so, how do I connect it up?
Here's the link to our board:
http://www.behringer.com/UB2222FX/index.cfm?lang=ENG
Thanks!
Jay.For 8 channels you'd need a FireWire interface or mixing console that offers at least 8 channels out.
An example, the interface I use, the Presonus FirePod FireWire Audio Interface
8 Mic PREs and 10 channels out (GB can use 8 of those) -
Using G4 iTunes to connect to pre-amp
Is the headphone port my only way of sending iTunes to my pre-amp? If not, can I use the firewire or a USB port (or something else)? Will I get better signal quality by using the latter?
Sorry for the late reply,
At the lower area of the back of my G4 MDD Dual there are 3 Holes for mini jacks.
1- (has ear phone icon indicator) for phone jacks
2- (audio icon) Line in
3- (audio icon) Line out
From manual, G4 Audio Specs G4 MDD Dual:
Front headphone jack
Built-in speaker
Stereo audio line in and line out minijacks
Apple speaker minijack for connection to optional Apple Pro Speakers
which G4 do you have ? perhaps, a different model ?
TTab -
Using the notes box in an appointment in calendar
Hi there
Do you know if you can view a calendar edit box in full screen.? All I can manage is to call up a small panel
This would be very helpful when I use the notes box to type in and later refer / edit action points
Thank youHi there
Do you know if you can view a calendar edit box in full screen.? All I can manage is to call up a small panel
This would be very helpful when I use the notes box to type in and later refer / edit action points
Thank you -
Hey Im in need of some help, I was using my Internet on my MacBook pro
Hey guys I need some help I was using my internet on my MacBook pro & I closed my laptop because my grandma was at the door and when I opened my laptop back up it asked for my password so I typed it in & it won't take it! Idk what to do please help!!!! I need it for my classes!!!!
Worst scenario
Install your Insalll Disc.
Power down the computer. then push in the insllar, and hold the letttre ''C tilll the gear comes up. You will be someone else -
Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the program and did a few profile building sessions, now it pops up each time I start the program, blocking me from using it. Help sure would be appreciated.
JayI looked at your post this morning and did not know enough to respond, other than to find out that links to iListen now go to newer, renamed software. Considering it's been nine hours with no response, I'm suspecting few people here have experience with that software. You could contact the current copmany that used to sell that package and see if they have any archived support info.
BTW: please check you entry for "Mac OS" in your profile. It says iOS, which cannot run on an iMac. iOS is the system for phone and iPads but can't run on Mac computers. Do "About this Mac" from the Apple menu and see what it says about the OS version. Should look like this:
If the "Processor" line says "Intel," you have a newer Mac than the old modles this forum covers; Intel iMac have their very own forum here:
iMac (Intel) -
Help using find dialog box with JTextArea
Hi i am using JTextField and getting a file read and then displayed in JTextField. Now i have used a dialog box for finding string within that file displayed in JTextField. I want to make it such that it ignores cases while finding the string and also want to make find next available in Find dialog box.
My code is: -
* @author Administrator
* To change the template for this generated type comment go to
* Window>Preferences>Java>Code Generation>Code and Comments
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.InputStreamReader;
import javax.swing.*;
public class TextAreaEx extends JPanel implements ActionListener {
static JFrame fr;
JButton button1;
JTextArea tx;
TextAreaEx()
super(new BorderLayout());
tx=new JTextArea();
FileInputStream fis=null;
StringBuffer sb=new StringBuffer();
try{
fis=new FileInputStream("C:/customers.xml");
BufferedReader br=new BufferedReader(new InputStreamReader(fis));
String h="";
while((h = br.readLine()) != null) {
sb.append(h + "\n");
catch(Exception e)
{ e.printStackTrace();}
tx.setText(sb.toString());
button1=new JButton("Find");
button1.addActionListener(this);
add(button1,BorderLayout.PAGE_START);
button1.setFocusable(false);
JScrollPane p1=new JScrollPane(tx);
add(p1);
public static void createShow()
JFrame.setDefaultLookAndFeelDecorated(true);
fr=new JFrame("My Frame");
TextAreaEx ob=new TextAreaEx();
ob.setOpaque(true);
fr.setContentPane( ob);
fr.setSize(400,400);
// fr.pack();
fr.setVisible(true);
public static void main(String s[])
createShow();
/* (non-Javadoc)
* @see java.awt.event.ActionListener#actionPerformed(java.awt.event.ActionEvent)
public void actionPerformed(ActionEvent e) {
if(e.getSource()==button1)
String s=(String)JOptionPane.showInputDialog(fr,"FIND:\n","Find",JOptionPane.INFORMATION_MESSAGE,
null,null,null);
System.out.println(s);
String text=tx.getText();
int offset=text.indexOf(s);
System.out.println(offset);
tx.setFocusable(true );
tx.select(offset,s.length()+offset );Sorry its not JTextField its JTextArea as mentioned in first line of first post.
-
Trying to filter an entire database using a combo box or text box
Hi,
I am looking to create a combo box with rows vice columns, then I would like to create a macro or some for form of filter that gives me the option to search within each or all of the selections.
I have created a search function (using a textbox and the button features) that allows me to search for anything in my database using applyfilter. The problem that I ran into with this was that when I hit the might work, but only the first line worked.
So I tried to use a combination box to create a filter of the fields that I want to view for the particular search I need, but I want to select row headers vice columns of information. For example if I have five fields of: Last Name, First Name, SSN, Document
number and Unique ID.
I want a combination box to show the following field header when I click the drop down option.
(Last Name
First Name
SSN
Documentation Number
Unique ID)
Then I would to apply a macro filter feature for files within theses individual fields. I am just getting started in VBA and using Macros, so any help would be awesome!!
If I am too far off target please direct me back, I tend to over think things.
Thanks in AdvanceDirk Goldgar, I tried to you use the suggested method you gave me. Part of the problem I was having was that I wanted to view the field list, which I now know is very possible thanks to you, but only wanted it to show as one single list of fields.
So took the information you gave me and went on to create a list box instead. I later found out why this was not working either.
In what way was it not working? You can do the same thing with a list box as I described for a combo box.
I have relationships of tables attached.
I don't understand what you mean by that last statement, or how it's relevant to the discussion. Do you mean you have multiple different tables that you might want to filter? So you would need to either (a) first need to select a table from a
list of tables in your database, and only then select a field in that table, or else (b) have a table listing all the data elements you might want to search, with the table and field name of each, and base a list box on that -- then the code to search would
know what table to select from, as well as what field to filter on.
So this info that you provided was very helpful. I will continue to go through the link you provided.
So I can quickly sum up what I need:
1. A dropdown box that allows me to search any Field List
2. A textbox that allows me to type in the searchable information for that particular field.
3. Or some way to build a filter function for the whole list, with a textbox to search the key words.
This is all still a bit unclear to me, because I don't know whether you want to search a particular table, or any of many possible tables in the database.
Dirk Goldgar, MS Access MVP
Access tips: www.datagnostics.com/tips.html -
How do i install opensolaris without using the virtual box??
hi.
i am new to solaris
i am currently using a windows XP OS
i got down the opensolaris cd from SUN
how do i install opensolaris without using a virtual box ?The OpenSolaris CD is a "Live CD". You can boot off of the CD, and either run the OpenSolaris operating system directly, or you can select the "Install" icon on the LiveCD desktop. You can find full instructions here: http://dlc.sun.com/osol/docs/content/IPS/getst1.html
Do you want to keep your Windows OS on the disk? If so, then you want to follow the instructions for partitioning your disk (unless you already have a spare partition).
-- Alan -
Safari crashes when using the dialog box to import/save files, in facebook under windows 7
I've encountered the following errors in some PCs, running Safari 5.1.7 in MS-Windows 7 Pro:
Safari crashes when using the dialog box to import/save files. One doesn't have to actually upload or download any file, the mere invocation of the relevant dialog box brings down all open Safari windows after a couple of seconds.
Errors displayed in the Event Log are:
Όνομα ελαττωματικής εφαρμογής Safari.exe, έκδοση 5.34.57.2, χρονική σήμανση 0x4f982b5e
Όνομα ελαττωματικής λειτουργικής μονάδας CoreGraphics.dll, έκδοση 1.87.0.0, χρονική σήμανση 0x4f9739a0
Κωδικός εξαίρεσης: 0x40000015
Μετατόπιση σφάλματος: 0x0013a762
Αναγνωριστικό ελαττωματικής διεργασίας: 0x17f4
Χρόνος έναρξης ελαττωματικής εφαρμογής: 0x01cded6b09576023
Διαδρομή ελαττωματικής εφαρμογής: C:\Program Files\Safari\Safari.exe
Διαδρομή ελλατωματικής λειτουργικής μονάδας:C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
Αναγνωριστικό αναφοράς:ebe64ac9-595e-11e2-a977-0016356671d1
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:00.000000000Z
EventRecordID
95609
Channel
Application
Computer
computername
Security
EventData
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
17f4
01cded6b09576023
C:\Program Files\Safari\Safari.exe
C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
ebe64ac9-595e-11e2-a977-0016356671d1
and
Ελαττωματικός κάδος (bucket) 2970527469, τύπος 1
Όνομα συμβάντος: APPCRASH
Απόκριση: Δεν υπάρχει
Αναγνωριστικό Cab: 0
Υπογραφή προβλήματος:
P1: Safari.exe
P2: 5.34.57.2
P3: 4f982b5e
P4: CoreGraphics.dll
P5: 1.87.0.0
P6: 4f9739a0
P7: 40000015
P8: 0013a762
P9:
P10:
Συνημμένα αρχεία:
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
Αυτά τα αρχεία μπορεί να είναι διαθέσιμα εδώ:
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
Σύμβολο ανάλυσης:
Επανέλεγχος για λύση: 0
Αναγνωριστικό αναφοράς: ebe64ac9-595e-11e2-a977-0016356671d1
Κατάσταση αναφοράς: 0
+
System
Provider
[ Name]
Windows Error Reporting
EventID
1001
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:10.000000000Z
EventRecordID
95610
Channel
Application
Computer
computername
Security
EventData
2970527469
1
APPCRASH
Δεν υπάρχει
0
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
0
ebe64ac9-595e-11e2-a977-0016356671d1
0
I have tried in-installing safari but it seems not to help. I have tried installing it to a third, newly installed pc and come to the same result.
All PCs are fully up-to-date as it regards Microsoft and Apple patches. Any ideas as to why this might happen?Still having the same problem. Ever the optimist, I submit the following info.
Error window screenshot can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_01.JPG
Enent log entry can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_02.txt
Version info can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_03.JPG -
OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?
Just want to confirm that I am also having this issue, The connection is fine, and it is in fact charging (@ 100%)
Everything Rick has said is like an echo to what is happening to me.
I have tried re-installing iTunes, and restarting the Bonjour service, sadly there is no change.
earlier before i updated iTunes it recognised my iPod but said that I had to update iTunes in order for it to work.
So i updated iTunes but now it's not even showing the device anywhere.
In case this helps:
OS: Windows 8.1
iTunes version: 11.3.1.8
Device: 5th generation iPod touch 16GB with ios 7 -
What is the use of dropdown box in wad in bi-7
what is the use of dropdown box in wad in bi-7
Hi,
Dropdown box in WAD is for changing the output of full or particular part of template at runtime.
For Eg. suppose u have states in dropdown box and u want the output of according to particular state then u select that state from dropdown box. so the output comes accordingly.
For doing these u have to assign a data provider to dropdown box which query give the output of states. and in the property of dropdown box u hav to assign the item which will affect by this dorpdown box.
I think it will help u.
Assign Point if it helps.
Regards,
Ravi -
How to use dynamic list box in survey builder?
Hello,
Could someone give me a little bit of thread? How to use dynamic list box in survey builder?Hi Liu,
Dynamic combo boxes::A combo box is dynamic if it references a document property for which a value set is defined in the configuration (System Administration ® System Configuration ® Content Management ® Global Services ® Property Metadata ® Properties ® Parameter Allowed Values).
At runtime (when you open the creation form) the system reads these values from the configuration and displays them in the dropdown list.
If you link a combo box for which list entries already exist to a document property with a value set, the system asks whether you want to delete the list entries. it is recommend that you accept this suggestion and delete the list entries from the XML Forms Builder. Otherwise inconsistencies could arise between the entries in the XML Forms Builder and the value set in the configuration. This can cause errors when saving.
Also you may Refer the Link for Further help:
http://help.sap.com/saphelp_crm50/helpdata/en/29/c40d3d2a83752de10000000a114084/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/00/9e7f41969e1809e10000000a155106/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/a7/5a874174a8050de10000000a1550b0/frameset.htm
Hope it Answers your Queries..
Thanks and Regards,
RK. -
I am trying to use the combo box, so that the users can type as well as go through the drop down and pick there choice.
But I have three issues
1. Whats happening is as soon as I type it in and hit submit it will not do anything, until and unless I click on the drop down and then go and click submit.
2. The combo box is a text box and the numbers are not sorted, is there a way to sort numbers for a combo box
3. How do I make the selection appear as the user is typing, for example If I type in 55, it should bring all the entries starting with 55.
I am using Entrylist which is derived by a standard BAPI.
Any help would be much appreciated.
Thanks,
NaseerHi Marcel,
I have selected the action as "System Action" "Submit" "Self". But it still does not work.
The other thing is the COMBO box is a TEXT box and the Values are "NUMBER" values so even when I select "sort" at the Entrylist level it would not sort it properly, simply because COMBO BOX is a Text box.
Please let me know if I am clear enough in explaining myself.
Waiting for you reply..
Thanks a lot Marcel.
Naseer -
I can't use Adobe, a box comes up saying i need to unistall the product then reinstall
I
can't use Adobe, a box comes up saying i need to unistall the product then reinstallWhat version of Adobe Reader?
What system?
What EXACT message (a screen shot can help here)?
Be very suspicious if a program is offering to help you with that, it could be a scam.
Maybe you are looking for
-
Used to be able to convert a table that came from a windows document into text only. Now I cannot find where to do this within the new pages. Have they dropped this useful tool or do I need to look further?
-
hi, i exported a tif sequence from a mp4 in premiere (cs6) to do some compositing on it. the exported images look the same but when doing some color correction on it the tif sequence reveals that it's in lower quality. the left side is the tif export
-
BI admin cockpit for process chains
Hi Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin
-
I installed Crystal Reports server 2008, i'm geting server not started erro
Hi, I'm getting error with server not started or not available error (FWM 01003). If i check in CCM, i don't see any entry for CMS server entry. How to start CMS server??? Please advise me. i installed trail version of crystal reports server 2008
-
Quering table names containing a value in any column
I searched a bit around this forum and found a solution for how to query the list of all tables select table_name from user_tables; However, I do not know how to do this - I want to find the list of all table names where any of the fields in these ta