Help on getting Visual Component for processor

hi all
I am having problem with the processor, i am not able to get the
Visual component and display it. Only the control panel component is being
display. Can anyone tell me what might be wrong.
thanx in advance

hi
Thanx for reply
Actually I had created processor using MprocessorMOdel
Now I want to show the monitor on my panel
But i am not able to get that
I am attaching the code
Plzzzz help me out
FileTypeDescriptor ftd = new FileTypeDescriptor(FileTypeDescriptor.MSVIDEO);
pm = new ProcessorModel(dsVideo, formats, ftd);
videoPlayer = Manager.createRealizedProcessor(pm);
videoPlayer.addControllerListener(this);
videoPlayer.start();
}catch(Exception me){
dsVideo.disconnect();
mc=(MonitorControl)dsVideo.getControl("javax.media.control.MonitorControl");
if(mc!=null)
monitor = mc.getControlComponent();
f.getContentPane().add(monitor, BorderLayout.CENTER);
mc.setEnabled(true);
this is the code
dsVideo ----- datasource
videoPlayer ------- RealizedProcessor
mc-----------------MonitorControl
Monitor ----------- component
thanx in advance

Similar Messages

NotRealizedError: Can not get visual component on an unrealized player

Exception in thread "main" javax.media.NotRealizedError: Cannot get visual component on an unrealized player
     at com.sun.media.BasicPlayer.getVisualComponent(BasicPlayer.java:491)
     at com.sun.media.MediaPlayer.getVisualComponent(MediaPlayer.java:48)
     at com.jbe.core.jdk.test.VideoMetadataTest.main(VideoMetadataTest.java:24)
Unable to handle format: mpeglayer3, 32000.0 Hz, 0-bit, Stereo, Unsigned, 8518.0 frame rate, FrameSize=9216 bits
public static void main(String[] args) throws NoPlayerException, IOException {
          URL url = new URL("file:C:/Video/Test.avi");
          Player player = Manager.createPlayer(url);
          player.realize();
          System.out.println(player.getVisualComponent());
     }This is my error log and my source code. Is there something I am doing wrong.? Please help me resolve this error.
Thanks,
Krishnan

the AirPort Express will no longer allow me to double NAT it and just continues to give me an error that the DHCP range conflicts with the WAN IP address of the base station?
Two possible fixes:
1) Perform a Factory Default Reset on the Express to clear out all the old and conflicting settings, then reconfigure it again.
2) Change the DHCP range settings.
For example, if the Express is now set to provide IPs from say 192.168.1.2 to 192.168.1.200......change the setting to read something like 192.168.5.2 to 192.168.5.200.
2) will likely allow you to bypass 1). But, I would still recommend that you do 1) as it is always a good idea to start from scratch when you are making changes to a device on a network.
Tesserax will have other good ideas for you as well, I am sure.

Hi i need help with getting my homework for school

im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
Modify the Inventory Program by adding a button to the GUI that allows the user to move
to the first item, the previous item, the next item, and the last item in the inventory. If the
first item is displayed and the user clicks on the Previous button, the last item should
display. If the last item is displayed and the user clicks on the Next button, the first item
should display.
· Add a company logo to the GUI using Java graphics classes.
Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that products information in the GUI. Post final .class and .java files as an attachment.
this is what i have there are three java files im puttong in here
first is the panel frame
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.*;
import java.text.NumberFormat;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
     private JPanel buttonJPanel; // panel to hold buttons
     private JButton buttons[]; // array of buttons
     private JLabel label1; // JLabel iventory number
     private JLabel label2; // JLabel product name
     private JLabel label3; // JLabel product price
     private JLabel label4; // JLabel product in stock
     private String p_ProductName; // private variable for the employee name.
     private int p_UnitCount; // private variable for the hours worked.
     private double p_UnitPrice; // private variable for the hourly wage.
     private int p_ItemNumber; // private inventory number
     //create inventory object
     Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
          myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
          myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
          myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
          myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
          myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
          label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
          label1.setToolTipText( "This is Inventory number" );
          add( label1 ); // add label1 to JFrame
          label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
          label2.setToolTipText( "This is Product Name" );
          add( label2 ); // add label1 to JFrame
          label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
          label3.setToolTipText( "This is product Price");
          add( label3 ); // add label1 to JFrame
          label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
          label4.setToolTipText( "This is Quanity in stock: " );
          add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
          String names[] = { "First", "Previous", "Next", "Last" };
          JButton buttons[] = new JButton[ names.length ];
          // create and add buttons
          for ( int count = 0; count < buttons.length; count++ )
          buttons[ count ] = new JButton( names[ count ] );
          buttonJPanel.add( buttons[ count ] ); // add button to panel
          } // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
          URL url = this.getClass().getResource("book103.gif");
          Image img = Toolkit.getDefaultToolkit().getImage(url);
          // scale the image so that it'll fit in the GUI
          Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
          // create a JLabel with the image as the label's Icon
          Icon logoIcon = new ImageIcon(scaledImage);
          JLabel companyLogoLabel = new JLabel(logoIcon);
          companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
          // add the logo to the GUI
          getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

this is the original part again with the code tag added
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.;
import java.text.NumberFormat;
import javax.swing.;
import java.awt.;
import java.awt.event.;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

I need help with getting an update for my 1st generation ipod shuffle.

I am trying to install iTunes and iPod software on my computer but the iPod cd is apparently not compatible with my version of windows. I need to download an update but I cannot get any support because my 1st generation iPod shuffle is not one of the selections available for support. Does anyone know how I can download the update I need?

Neil, I installed itunes but that hasn't helped the issue I am having with my 1st generation iPod. I have searched and searched but there is nothing that allows me to update my iPod, download to my iPod, all I see is iPhone or iPad, neither of which I happen to own, so I am still at square one with my problem. I can't get any Apple support because my iPod is not one of the choices, no mention of the 1st generation. It's as if it no longer exists and there is no support available. I tried plugging it into my usb port, hoping that something would pop up on the screen and give me guidance, but alas, that failed as well. I feel like this whole thing is an exercise in futility. Thanks for your attempt to assist me.

Some Help to get started needed for a newbie

I am attempting to add some simple email functionality to a small utility
program I am writing in Delphi for my school. We have used Groupwise for
many years and I have programmed a bit in Delphi but mainly database work.
Can anyone tell me where to find some documentation that will help me to
get started in using the GW Tokens API with Delphi?
How do I install it?
Do I need a Type Library for it to use it effectively with Delphi?
Is there some sort of basic skeleton code that I can refer to?
I would greatly appreciate any help that anyone might offer here.
Thanks
Alan Humphries

freemat2 wrote:
Ooops putting some info would have helped.
It will be a long hard road but..
for VB (so you will need to translate for Delphi)
Add references to Groupwise.exe to your project and Groupware type library
GWCMA1.DLL
Then this will create a new email and drop in a few addresses if supplied
(eg from your CRM)
Public Sub SendEmail(ByVal lsEmailAddress As String, ByVal lsDomain As
String, lblProgress As Label)
Dim vCommander As Object
Dim rc As Long
Dim sResult As String
Dim lsOperation As String
Dim i As Integer
Dim sUserName As String
Dim sEmailTo As String
Dim nPtr As String
Dim lsMsg As String
On Error GoTo Error_Trap
lsMsg = ""
If lsEmailAddress = "" Then
lsMsg = lsMsg & "Please supply a recipients email address" & vbCrLf
End If
If lsMsg > "" Then
lblProgress.Caption = lsMsg
MsgBox lsMsg
Exit Sub
End If
If lsDomain > "" Then
lsEmailAddress = lsEmailAddress & "@" & lsDomain
End If
Set vCommander = CreateObject("GroupwiseCommander")
DoEvents
lblProgress.Caption = "Create email"
rc = vCommander.Execute("NewMail()", sResult)
sEmailTo = lsEmailAddress
While sEmailTo > ""
nPtr = InStr(sEmailTo, ";")
If nPtr = 0 Then
sUserName = sEmailTo
sEmailTo = ""
Else
If nPtr > 1 Then
sUserName = left$(sEmailTo, nPtr - 1)
End If
If nPtr < Len(sEmailTo) Then
sEmailTo = Mid$(sEmailTo, nPtr + 1)
End If
End If
lblProgress.Caption = "Add " & sUserName
lsOperation = "TextSetTo(" & vbDoubleQuotes & sUserName &
vbDoubleQuotes & "; True) "
rc = vCommander.Execute(lsOperation, sResult)
If sResult > "" Then
MsgBox "Error adding " & sEmailTo & " ,because " & vbCrLf &
sResult
End If
Wend
lblProgress.Caption = ""
DoEvents
Exit_Proc:
Exit Sub
Error_Trap:
MsgBox "Error creating email " & vbCrLf & Err.Description
lblProgress.Caption = "Error: " & Err.Description
Resume Exit_Proc
End Sub
> Michael Risch wrote:
> > DId you look at the Groupwise developer PDF or the sample code on the
> > website? Both should be helpful.
> > [email protected] wrote in news:KSlQh.218$7e7.73@prv-
> > forum2.provo.novell.com:
> > > Thanks - this is starting to look like a long, hard road
> > >
> > > Alan Humphries
> > >
> > >> Since you are using Delphi, all I can suggest is the PDF :-(
> > >>
> > >> Never ever had any luck with early binding and Delphi
> > >>
> > >> No need to install anything besides the GW Client though
> > >>
> > >>
> > >> --
> > >> Best Regards
> > >>
> > >> Tommy Mikkelsen
> > >>
> > >> IT Quality A/S
> > >> Denmark
> > >>
> > >> Novell Developer Forums SYSOP
> > >>
> > >> Please Report back any success or failure, That way we all learn
> > >>
> > >> Sorry, but no support through email
> > >>
> > >> "I hate bugs".......Tommy Lee Jones, MIB
> > >>
> > >> Be a GroupWiseR, go http://www.groupwiser.net
> > >
> > >

F4 Help to get the path for a File source directory

There are numerous function modules for browsing a particular file in desktop and getting the file path (including the fine name) , like F4_FILENAME , KD_GET_FILENAME_ON_F4 , WS_FILENAME_GET etc. But can anyone tell me how to fetch only the directory path to the field were the F4 help is given. Actually the filename has to come in some other field in the selection screen. Is there separate funtion modules for these OR will changing parameters in the above function modules work?
Pls Help....
Also are there function modules for providing F4 help for getting the path to a file in application directory?

Try this method CL_GUI_FRONTEND_SERVICES.
It is a Global CLASS which is having different methods for different purposes
see the documentation of it and use the methods of it
see
CL CL_GUI_FRONTEND_SERVICES
Short Text
Frontend Services
Functionality
The class CL_GUI_FRONTEND_SERVICES contains static methods for the following areas:
File functions
Directory functions
Registry
Environment
Write to / read from clipboard
Upload / download files
Execute programs / open documents
Query functions, such as Windows directory, Windows version, and so on
Standard dialogs (open, save, directory selection)
Example
Determine the temp directory on your PC:
DATA: TEMP_DIR TYPE STRING.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GET_TEMP_DIRECTORY
CHANGING
TEMP_DIR = TEMP_DIR
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2.
IF SY-SUBRC 0.
Error handling
ENDIF.
flush to send previous call to frontend
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
IF SY-SUBRC 0.
Error handling
ENDIF.
WRITE: / 'Temporary directory is:', TEMP_DIR.
Notes
The class CL_GUI_FRONTEND_SERVICES is based on the Control Framework. See the documentation for more information, in particular on CL_GUI_CFW=>FLUSH which must be called after many CL_GUI_FRONTEND_SERVICES methods.
Migration Information
The old file transfer model was based on function modules of the function group GRAP. The old features have been replaced by the class CL_GUI_FRONTEND_SERVICES. The following list contains the old function modules (italic) and the new methods (bold) that replace them:
CLPB_EXPORT
CLIPBOARD_EXPORT
CLPB_IMPORT
CLIPBOARD_IMPORT
DOWNLOAD
GUI_DOWNLOAD, dialog replaced by FILE_SAVE_DIALOG
PROFILE_GET
No replacement, use REGISTRY_* methods instead
PROFILE_SET
No replacement, use REGISTRY_* methods instead
REGISTRY_GET
REGISTRY_GET_VALUE, REGISTRY_GET_DWORD_VALUE
REGISTRY_SET
REGISTRY_SET_VALUE, REGISTRY_SET_DWORD_VALUE
UPLOAD
GUI_UPLOAD, dialog replaced by FILE_OPEN_DIALOG
WS_DDE
Obsolete: This function is no longer supported.
SET_DOWNLOAD_AUTHORITY
Obsolete: This function is no longer supported.
WS_DOWNLOAD
GUI_DOWNLOAD
WS_DOWNLOAD_WAN
Obsolete: This function is no longer supported.
WS_EXCEL
Obsolete: This function is no longer supported.
WS_EXECUTE
EXECUTE
WS_FILENAME_GET
FILE_SAVE_DIALOG, FILE_OPEN_DIALOG
WS_FILE_ATTRIB
FILE_SET_ATTRIBUTES, FILE_GET_ATTRIBUTES
WS_FILE_COPY
FILE_COPY
WS_FILE_DELETE
FILE_DELETE
WS_MSG
Obsolete: This function is no longer supported.
WS_QUERY
CD (current directory)
DIRECTORY_GET_CURRENT
EN (read/write environment)
ENVIRONMENT_GET_VARIABLE
ENVIRONMENT_SET_VARIABLE
FL (determine file length)
FILE_GET_SIZE
FE (check if file exists)
FILE_EXIST
DE (check if directory exists)
DIRECTORY_EXIST
WS (determine Windows system)
GET_PLATFORM
OS (operating system)
GET_PLATFORM
WS_UPLDL_PATH
Obsolete: This function is no longer supported.
WS_UPLOAD
GUI_UPLOAD
WS_VOLUME_GET
Obsolete: This function is no longer supported.
Reward points if useful.

HELP Setting up visual voicemail for samsung s5

I am trying to access my visual voicemail on my new phone and I keep getting this error: "Unable to verify subscription status. Please try again later". I don't know what to do to get this set up. I thought it was as simple as activating my new phone and everything transferring over.

I'm sorry this is happening with your voice mail joehamed. Please try powering phone all the way off, then re-add feature via My Verizon, http://vz.to/1ottQL0, then power back on and try to set up on your phone. Let's see if this helps. Please keep us posted.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Best place to find paid help to get Spiceworks customized for an MSP?

Grey Howe is a former Spiceworks University Trainer and he does this for a living. He can help you install and customize Spiceworks Helpdesk/Inventory/Network Monitor. Give him a shout.
http://community.spiceworks.com/people/grey

We really like Spiceworks so far but the time it is taking to get it complete is more than I had hoped. We have the main and the first remote set up and talking. There are many other things we need done. How would I find someone to help that I know has experience in MSP setup?
This topic first appeared in the Spiceworks Community

Need help to get processing log for mass invoice output

Hi Experts,
I have one requirement,
My customer will send invoices to their customers in bulk on monthly basis. The customers will receive the invoices through emails, fax or printout. Now the issue is when they send the output to the customers there might be some failures in delivery because of some reason to some customers. I want to capture all the invoices, customers, medium and error text and want to display as a report.
We can see the processing log for a single invoice in VBFA transaction but I want to display one consolidated list where the user can see all the error log records at one place.
I know some tables where we can see some data in NAST, NACH but I would be greatful to you if you provide some more information about this.
Please provide whatever info you have.
Regards,
Dileep.

Hi Study abap,
go through this code and use the HTEXT fm accordingly to ur requirement. This is just a sample kind of thing which will help u to write s-kunnr in htext.
SELECT-OPTIONS: S_MATNR FOR PBIM-MATNR,
S_WERKS FOR PBIM-WERKS.
DATA: BEGIN OF HTEXT.
INCLUDE STRUCTURE THEAD.
DATA: END OF HTEXT.
DATA: BEGIN OF LTEXT OCCURS 50.
INCLUDE STRUCTURE TLINE.
DATA: END OF LTEXT.
DATA: BEGIN OF DTEXT OCCURS 50.
DATA: MATNR LIKE PBIM-MATNR.
INCLUDE STRUCTURE TLINE.
DATA: END OF DTEXT.
DATA: TNAME LIKE THEAD-TDNAME.
SELECT * FROM PBIM WHERE WERKS IN S_WERKS.
MOVE PBIM-BDZEI TO TNAME.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'PB'
LANGUAGE = 'E'
NAME = TNAME
OBJECT = 'PBPT'
ARCHIVE_HANDLE = 0
IMPORTING
HEADER = HTEXT
TABLES
LINES = LTEXT
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
LOOP AT LTEXT.
IF LTEXT-TDLINE NE ''.
MOVE LTEXT-TDLINE TO DTEXT-TDLINE.
MOVE PBIM-MATNR TO DTEXT-MATNR.
APPEND DTEXT.
ENDIF.
ENDLOOP.
ENDSELECT.
LOOP AT DTEXT.
WRITE:/ DTEXT-MATNR, DTEXT-TDLINE.
ENDLOOP.
Kindly reward fi found helpful.
cheers,
Hema.

Help to get milestones report for all sales documents

Dear Friends,
Could you please tell me the standard reports for milestone detail i.e combining FPLA and FPLT...
Apprecaite your valuable and quick response.
Thanks
Siva

Try transaction VA05. In that choose "Open Orders" along with other selection criteria.
If you want the Open sales order qty in output and its not displayed, do the following.
Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
For both you'll need an object registration in OSS.
Hope this helps.
Thanks,
Balaji

How can I get visual notification for mail

Hello,
As Lion gives us a new and better mail software with a sound I would like to enquire how it would be possible to have an additional visual notification when an email is received.
Many thanks
Yair

Okay ... we've got Mountain Lion and we have Apple Mail for Mountain Lion.
Now, back to my recollection for Apple Mail and plain ole Lion ... when I hit the "envelope" icon in Mail, or hit CMD-Shift-N, I heard my sound (Basso) and I saw the rotating cursor beside each of my accounts.
But with Mountain Lion, I just hear the Basso sound, but no rotating cursor.
Fine ... just please tell me what I can do to retrieve the rotating cursor visual indicator, or notification.
Obviously, this is not a gigantic deal, just something I'm used to.
Thanks,
John Love
[email protected]

Help in get query id for cancel query

xmlService.cancelQuery(QueryID, m_sessionID);
QueryResults xmlresult= xmlService.executeXMLQuery(reportRef, XMLQueryOutputFormat.SAWRowsetData, executionOptions, rp, m_sessionID);
I want to cancel the query that is currently being executed . It requires QueryID and sessionID but the “executeXMLQuery” returns the query id only after it has been executed. How to get the “ query id” while the executeXMLQuery is still in process. Any one help me pls...

with
the_data as
(select 'CRE' segment,'CRE - MUMBAI' units,3 total_items from dual union all
select 'CTA','CTA - CHENNAI',13 from dual union all
select 'CTA','CTA - DELHI',37 from dual union all
select 'CTA','CTA - HYDERABAD',10 from dual union all
select 'CTA','CTA - KOLKATTA',22 from dual union all
select 'CTA','CTA - MUMBAI',110 from dual
select segment,
       case grouping_id(segment,units) when 0
                                       then units
                                       when 1
                                       then 'Sub total'
                                       else 'Grand total'
       end units,
       sum(total_items) total_items
from the_data
group by rollup(segment,units)
SEGMENT
UNITS
TOTAL_ITEMS
CRE
CRE - MUMBAI
3
CRE
Sub total
3
CTA
CTA - DELHI
37
CTA
CTA - MUMBAI
110
CTA
CTA - CHENNAI
13
CTA
CTA - KOLKATTA
22
CTA
CTA - HYDERABAD
10
CTA
Sub total
192
Grand total
195
Regards
Etbin

Need help in getting proposed approvers for a work item

Hi All,
We are trying to get the proposed approvers and the actual approver details for a particular work item.
Before the work item is actioned we are able to see all the proposed agents for that particular work item.
But once that work item is actioned then only the agen who has actioned on the work item is appearing in the list. All other agents are not appearing.
For this we are using the FM BBP_WFL_DIN_APPR_WORKFLOW_GET.
We have also tried some other FM's and tables, but none of them were helpfull.
Please let us know if you know any table or FM or class which we can use to get these details.
Scenario:
Work Item: 12345
Before action on the work item
Possible(Proposed) agents: Agent 1, Agent 2, Agent 3.
Actual Agent: blank
What we want, after action on the work item if "Agent 2" acts on that item.
Possible(Proposed) agents: Agent 1, Agent 2, Agent 3.
Actual Agent: Agent 2
But what we are get is:
Possible(Proposed) agents: Agent 2.
Actual Agent: Agent 2
Thanks a lot.
Regards,
Kranthi.

Hi,
What did you draw those lines with ???? Just a drawLine() command ????
If so, it is very difficult to track the exact mouse coordinates that correspond to a click at a particular place and then place an 'X' or an 'O' there !!!!
Try implementing it with 9 Buttons placed at those specific positions. In this case, it will be very simple to track the user's input when he clicks on any of those buttons...the implementation will become really simpler.
Check it out !

After I "updated" my iPad mini with iOS7 Siri lost her voice! Help me get it back for her

IS THERE ANY WAY TO GET SIRI'S VOICE BACK? HAS THERE BEEN ANY FIXES OR UPDATES THAT I MAY HAVE MISSED?
I updated iOS7 when it was first introduced to my iPad mini and when I did Siri went speechless. When she replies, it's written and it's not always convenient.
And of course with the "update" there were other "problems" that I have learned to work around, waiting for another "update" but I haven't seen that, now I'm going to just start looking for fixes as I come across them.

Thanks for your suggestion Diavonex, I did go thru the steps as you have detailed out, however when I get to "#3 My Info> . . . ." I am unable to select "default" the field is populated with "My Contacts" and initially had my name.   I have removed my email accounts and to try to get it to leave my contacts and it remains there although now it says "NONE".
I also tried the "RESET" as suggested by Texas Mac Man.    And still nothing.
Any more suggestions? But now we are looking at two issues. First ~ Silent Siri      AND NOW    Second ~ #3 My Info under the Siri label does not have a "default" option as it DEFAULTS to my CONTACTS
Thank you both again, I appreciate your suggestions.

Help to get Confirmation for service :(

Hi
I just start Blackberry 8900 curve
I send request to my mobile company
but they told me it activated
and my mobile have problem
but I didn't git amsg confirm agree to activating my service
the edge small liter
I turn off my mobile many time with removing battery
also I try removing sim card
also i try format it
its all same
help plz
Thaks alots

sorcerer_q8 wrote:
the edge small liter
Go to Options - Mobile Network - turn data services ON

Help on getting Visual Component for processor

Similar Messages

Maybe you are looking for