Help on how to change or edit bundle identifier

Good day all, please i want to change the bundle id in itune connect where am editing application info, but i can't see the new bundle id i want to use and i need help on this please, where do i start from.

Hi…
In order to change the wireless settings of your router you need to login into the router configuration page. Open your internet explorer browser…in the address bar type http://192.168.1.1 ( Default IP address). Leave the username field balnk……type admin as password (If you have not changed the router password). When the setup page loads fully…..click on the tab that says wireless. Just below the main tab wireless ….click on the sub tab that says wireless security. You can Change the wireless security settings here. After the changes are made click on save settings.

Similar Messages

Help! How to change my email

I just bought a used blackberry torch 9800 from my sister.
I cannot for the life of me figure out how to change my email settings from an enterpirize account to a personal email account.
Help i am ready to throw the thing under a truck!!!
Solved!
Go to Solution.

Hello!
Actually, you cannot rid yourself of the Enterprise selection...rather, you need the proper data plan in order to ADD Personal/Internet email to the wizard. Unless you are on BES/corporate, you should stay completely away from all Enterprise selections of all kinds.
To use the proprietary BB services (including Push email capability, BBM, etc.), you must have an adequate data plan from your carrier. The carriers host BIS (BlackBerry Internet Service) for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a Push-email enabled BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), your BB-proprietary services will function (e.g., you will have Personal/Internet Email added to the email setup wizard, your BBM will function, etc).
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
With hundreds of carriers in the world, each with dozens of different data plans, it's impossible to tell you specifically what any service plan might actually provide. Only the carriers can answer that question. The best thing to do is to decide what services you desire, and then talk to your carrier about obtaining (from them) a data plan that enables what you desire.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HELP! How to change an Invalid email address

Hi,
Please can someone help.
My daughter set up her Blackberry ID with a slight mistake in the email address. This has only just caused a problem as her screen froze so she removed the battery and had to re-input the password and cannot remember it. Of course the password reminders are going to an invalid email.
I have set up a correct Blackberry id for her now (on the computer) but cannot change it on her phone as the original password for the incorrect email is required!
I've tried to google and I'm sure it's simple but have a distraught daughter who cannot BBM her friends!
Is the only solution to wipe it? and if so how?
Many thanks

Hi goody24
Welcome to BlackBerry Support Forums
Sorry ! I think you also agree that we can change or reset our password but we should have a vaild email address i;e BlackBerry ID username ,If it is wrong then you are locked . No other way but have to change or create a new BlackBerry ID. Do your Backup and then follow this Knowledge Base to Create a new valid BlackBerry ID of your own.
KB26694 : How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

How to Change Default Editing in Flash 8

Hi All,
I have bitmaps from a template that evidently were imported
directly to the stage. When I right mouse click on them to edit
them the default editing program is Nero Photosnap Viewer. I would
like to change this to Fireworks 8. I looked in Edit>Preferences
and there is no reference there to change this.
You're help would be much appreciated.
Scott

Hi,
1- open the library and find your image
2- right-click and choose edit with
3- locate your program

Need Help on How to Change The Encryption Key and or Change security settings

Hello, i just installed the wireless router and i would like to know how i can change the encryption key or change the security settings (i want it so you do not have to answer it with a password). Thank you in advance.
Message Edited by DARK_MARIO on 01-06-200706:10 PM

Hi…
In order to change the wireless settings of your router you need to login into the router configuration page. Open your internet explorer browser…in the address bar type http://192.168.1.1 ( Default IP address). Leave the username field balnk……type admin as password (If you have not changed the router password). When the setup page loads fully…..click on the tab that says wireless. Just below the main tab wireless ….click on the sub tab that says wireless security. You can Change the wireless security settings here. After the changes are made click on save settings.

[Beginner] Help! How to change the packet name for an jax-rpc example

Hi
I am new to the JWSDP, I tried to build and deploy the helloservice application (the example in
tutorial), it works fine. But I want to change the packet name from helloservice to books, it
returns error message during the building process.
Here is what I did.
I changed the folder name from helloservice to books.
In helloIF.java and helloImp1.java, changed to "package books"
In build.properties:
example=books
war.path=${tut.root}/examples/jaxrpc/books/${dist}/${deployable.war}
context.path=${hello.context}
portable.war=${context.path}-portable.war
deployable.war=${context.path}.war
In jaxrpc-ri.xml,
<?xml version="1.0" encoding="UTF-8"?>
<webServices
xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/dd"
version="1.0"
targetNamespaceBase="urn:foo"
typeNamespaceBase="urn:foo"
urlPatternBase="/ws">
<endpoint
name="MyHello"
displayName="HelloWorld Service"
description="A simple web service"
interface="books.HelloIF"
model="/WEB-INF/model.gz"
implementation="books.HelloImpl"/>
<endpointMapping
endpointName="MyHello"
urlPattern="/hello"/>
</webServices>
In config-interface.xml,
<?xml version="1.0" encoding="UTF-8"?>
<configuration
xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<service
name="MyHelloservice"
targetNamespace="urn:foo"
typeNamespace="urn:foo"
packageName="books">
<interface name="books.HelloIF"/>
</service>
</configuration>
When I run "ant build", it returns the following error message:
run-wscompile:
[echo] Running wscompile:
[echo] C:\jwsdp-1.3\apache-ant\../jaxrpc/bin/wscompile.bat -define -d bui
ld -nd build -classpath build config-interface.xml -model build/mo
del.gz
[exec] error parsing configuration file: XML parsing error: com.sun.xml.rpc
.sp.ParseException:1: com.sun.xml.rpc.sp/P-067
[exec] Result: 1
All I want to do is just change the packet name, anyone know how to do it?
Please help me.
Thank you.

For future reference, please post JAXRPC related questions to [email protected]
There is something syntatically wrong with your config.xml. Try reverting back to the original, and try that. Then try modifying it again making sure to only change the packageName.

Please Help! How to save exact edits from LR5

Good Afternoon All,
I have been doing many edits in LR5 and I am losing something along the way...this is what I have been doing....
The image is edited in LR5 (exposure,blacks,whites etc)
The image is edited in Photoshop (spot heal)...(copy with lightroom edits)
Edits made in Photoshop are saved back to lightroom (not sure saving method here?)
Final product is exported from LR5 to email (sRGB /JPEG)
The blacks in the image look VERY different once emailed from the Mac Computer. When viewing on the IPAD, Laptop, Mobile devices these images dont look exactly the same prior to being sent via email.
Any help much appreciated!

Hey sorry, I am coming back to the post and saying that it didn't work. I was exporting as sRGB...and now when I upload it to facebook or my website it is not uploading the same...
I thought that it worked because it was cropped small but when I enlarged it the picture looks distorted as if changes were made and the background looks faded. I used a black background for my pictures and you are able to see several creases in the background. I would like the background of the picture to be black as well as any types of changes that I make within ANY picture I want to be able to export it as well as be able to change it to any size
this is becoming frustrated...

Help!How to change the language of java compile information?

Hi,every body!
my first language is not english, so please forgive me for my poor english.
My OS is Windows XP Chinese edition，and my JDk is 1.6 u5 multi-language edition. The problem is that，when I compile java programs with problems, the jdk gives a error information in Chinese. I think the informatin is translated terribly. Some even hard to understand. I wanna modify jdk to display error info in English. I try to find a answer on google, but failed. please give me a hand, thanks!

To Darryl.Burke , I 'm sorry to make you hava a so feeling. I just wanna get a answer ASAP. I copy my reply it's because that i think above reply in the two forum it is similar, and i can use the same word to reply. It doesn't means i don't respect the replyers. I don't want you misunderstand me. I have reflected upon my mistakes. I hope you can help me in the future as before.Thanks all the same.

Business Catalyst Help | Learn how to change the domain name

This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/change-site-domain1.html

A Muse site seems to be automatically hosted on a web basic site. So when you want to give your site the proper domain name, (which is already purchased and added to the BC servers), and have it hosted on your web + plan (or another premium web plan with mail), where is the option for that? As far as I can see, this option is not offered. Do you upgrade it from your premium plan? And if so, how?

Help! How to change the video frame size during RTP transmission

Hi there.
In a RTP transmission:
How can I change the size of the frames of the video while I have the processor in the server running?
i.e. while the server is running, i want to change a video from 400x200 to 200x100
Thanks

I am trying to implement the same functionality. I've tried to reset the format using the trackControl.setFormat method but this only appears to be supported while the processor is in a configured state. I'm still investigating, but if you happen to know a solution please let me know.
Here is what I'm trying to do... In the middle of a session, I'm trying to change the video format from h263/rtp:352x288 to h263/rtp:176x144

PLS HELP! How can I make editable text easier for user on iPad?

Hi,
I am having trouble allowing the risk elements text to be edited easily on ipad, can anynoe take a look at this project and ffe any solution?
https://www.dropbox.com/s/7i2xu9n0pv8qqf2/RISKRADAR%20EDGE_fin.zip
thanks@

HI there, your current implementation seems pretty legit to me. I was able to edit the text prety easily the first time, but then when I try to edit the text again, I can't seem to select the text. Not sure if your drag behavior is overriding the input text.

HELP PLEASE: How to change game centre ID to new iPad Air??

This is my first post so I hope I've put it in the right area?
My partner originally had the iPad I currently use, which is an iPad2.
He created a Game Centre profile and every game I have downloaded from the App store has gone under 'his' Game Centre Profile BUT using 'my' Apple ID & password.
I'm getting a new iPad Air today and want to transfer EVERYTHING to my OWN Game Centre profile and DO NOT want to risk losing all my games on the iPad 2!!
1. If I delete his Game Centre profile do I risk mucking up or losing my games on the iPad 2?
2. Can I merge the two Game Centre accounts?
3. What do I do?
I was told his Game Centre account was linked via iCloud so I deleted that, but still his Game Centre account keeps on popping up on the iPad 2.
I'd really appreciate anyone's help on this, who is far more experienced than I am because I really don't want to lose my games that I've been playing for a number of years
End result: I want ALL my games on the iPad 2 onto my new iPad Air under my own Game Centre account.
Any help would be appreciated.
Thank you.

Any ideas anyone on what I need to do re; above and the Game Centre??
I really want to try and swap everything over today, if I can, without losing anything.

How to change the default element tag using dbms_xmlgen

here is my code that generate output for purchase order data. I followed the syntax shown in xml db developer guide.
I am getting the results but element tags are CAPS letters( As the coloumn names in the type defenitions are stored in CAPS in Oracle). but I need to show in small letters as per my requirement.
can anyone help me how to change the default tag names for elements.
==================================HERE IS THE CODE==================
DECLARE
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
BEGIN
qryCtx := DBMS_XMLGEN.newContext
('SELECT PODL_H_T
( CLOSEDDATETIME ,
COMPANY ,
CAST(MULTISET
(SELECT LINENUMBER ,
COMPANY ,
PURCHASEORDERID ,
ITEM ,
QUANTITYUM ,
TOTALQUANTITY
FROM cpo_wms_podl_LINES
WHERE PURCHASEORDERID = PH.PURCHASEORDERID) as PurchaseOrderDetailList
FROM cpo_wms_podl_HEADERS PH ');
-- now get the result
DBMS_XMLGEN.setRowSetTag(qryCtx, 'Receipts' );
DBMS_XMLGEN.setRowTag(qryCtx, 'PurchaseOrder' );
result := DBMS_XMLGEN.getXML(qryCtx);
INSERT INTO temp_clob_tab VALUES (result);
DBMS_XMLGEN.closeContext(qryCtx);
END;
-- select * from temp_clob_tab
===========create type script=====================
cpo_wms_podl_HEADERS
CREATE or replace TYPE PurchaseOrderDetail AS OBJECT(
LINENUMBER VARCHAR2(400 BYTE),
COMPANY VARCHAR2(400 BYTE),
PURCHASEORDERID VARCHAR2(400 BYTE),
ITEM VARCHAR2(400 BYTE),
QUANTITYUM VARCHAR2(400 BYTE),
TOTALQUANTITY NUMBER
create type PurchaseOrderDetailList as table of PurchaseOrderDetail
create table temp_clob_tab(result CLOB)
create type podl_HEADERS_list_t as table of podl_HEADERS_t
CREATE or replace TYPE PODL_H_T AS OBJECT
CLOSEDDATETIME DATE,
COMPANY VARCHAR2(400 BYTE),
CREATEDDATETIME DATE,
PURCHASEORDERID VARCHAR2(400 BYTE),
SHIP_TO VARCHAR2(400 BYTE),
linelist PurchaseOrderDetailList
)

but I need to show in small letters as per my requirement.add alias column names in double quotes as in
SQL> select dbms_xmlgen.getxmltype('select dname "DeptName", loc "Location" from dept') dept_xml from dual
DEPT_XML
<ROWSET>
<ROW>
    <DeptName>ACCOUNTING</DeptName>
    <Location>NEW YORK</Location>
</ROW>
<ROW>
    <DeptName>RESEARCH</DeptName>
    <Location>DALLAS</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>CHICAGO</Location>
</ROW>
<ROW>
    <DeptName>OPERATIONS</DeptName>
    <Location>BOSTON</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>MUNICH</Location>
</ROW>
</ROWSET>
1 row selected.

How to change the date format?

Hi,
I need to display the data format as(YYYY-MM-DD). But now it displays(2009-1-9)
Here is my code snippet which i used to display the data format as(2009-1-9)
*<INPUT TYPE=TEXT NAME="date_submitted" MAXLENGTH=20 SIZE=10 VALUE="" onBlur= "return dateSubmitted()">  (YYYY-MM-DD)*
*<SCRIPT LANGUAGE="javascript">*
dateSubmitted()
*</SCRIPT>*
function dateSubmitted()
                    if (document.pgUpdate.date_submitted.value == "")
                         date = new Date();
                         month = date.getMonth() + 1
                         document.pgUpdate.date_submitted.value =
                                        date.getYear() + "-" + month + "-" + date.getDate();
                    return true;
Can anybody help me how to change the date format?
Thanks in advance!

prit123 wrote:
use SimpleDateFormat class. The code is :He posted a Javascript related question, not a Java related question.
Please use forums devoted to Javascript. You're here at a Java/JSP forum.
There are JS forums at webdeveloper.com and dynamicdrive.com. Good luck.
String formatPattern = "yyyy-mm-dd";
SimpleDateFormat sdf = new SimpleDateFormat(formatPattern);
sdf.format(yourdate);yyyy-mm-dd denotes year-minutes-days. Please go read the SimpleDateFormat API as well.

How to change the message in CUCM 7.1(2) " Your Current Options"

Hi,
Can any one help me how to change the system message in CUCM 7.1(2) " Your Current Options" to another text.
Thanks...

As far as I know you can't change that on CUCM.
On CME you can.
Bye,
Jan
Sent from Cisco Technical Support iPad App

Help on how to change or edit bundle identifier

Similar Messages

Maybe you are looking for