Help on HP Mini 210

sir can i ask help about my netbook
someone uninstall my Recovery manager.
i havent created any single recovery but
my Drive D Recovery is still intact
how can i make my recovery?

Download the Windows 7 32-bit recovery environment from here. Download the Windows 7 USB DVD download tool from here.
You will use the ISO that you downloaded and the Microsoft Windows USB DVD tool to create a USB repair media thumbdrive.
When you boot your netbook from the USB thumbdrive you should have access to the repair function of Windows and a command line console. In the comand line console you will be able to use the diskpart command to make your recovery partition D: active again.
Type the following commands and press the enter key after each one.
diskpart
list disk ( you should see a list that shows your USB thumbdrive and hard disk)
select disk X (I chose X arbitrarily . It represents the number of your installed hard disk)
list partition ( you will see alist of partitions on your hard disk)
select partition Y ( Y is the number that represents your recovery partition from within the list generated by the previous comand)
You should see that the correct partition is now selected by an asterisk next to it
active (diskpart will respond that it marked the partition as active)
list partition (you should see a partition list with the recovery parttiion now shown as active)
exit and then close the command window
The following image is just an example of the responses you should see after entering the commands
Once that is done you should be able to reboot and use the F11 key to access the recovery manager and recover your netbook to its factory image state by use of the Recovery Manager.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Can anyone help with my Mini 210 Bios Password

Can anyone help with my Mini 210 Bios Password
master password after enter 3x comes CNU9491VLG
Thanks in advance

Hi,
Please try (all lower cases):
e9lovo36kh (3rd char is lower case of L).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Help my HP Mini 210-1010NR PC

I don't know why but when I'm on my netbook it keep over heating when I'm charging it. It somethimes will over heat even when it not plug in to the wall. I check the fan and it is running at all times i had a fan to put under it but that don't help it turn my sreen blue. Does anyone know what could be making that happen?

Hi Darkfirepr,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 210-1010NR and start up issues. Here is a link to troubleshoot the HP Mini. Before starting please disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HELP MY NOTEBOOK HP MINI 210-1101TU

i have problem with my notebook, can't booting and entered to windows because my system recovery is nothing, i have to try for use Roxio BackOnTrack but still not able to get my USB boot on, what should I do so that my notebook can run as before anymore? anyone please HELP ME.... you cant give me suggestion to my email [Personal Information Removed]
I attach the following picture at boot time

Hi Belajar,
I understand you are having complications with the boot menu on your HP Mini 210-1101TU. Here is a document on how to choose the boot devices.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c00364979&lc=en&product=4207223&tmp...
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Help HP mini 210-1000

Ii have an HP mini 210-1000, for some reason the HP quick web was turn off. how do we turn it back on?

Enable IOS through HP QuickWeb Configuration Tool
To enable the IOS through the QuickWeb Configuration Tool, do the following actions:
Click Start, All Programs, HP QuickWeb , and click HP QuickWeb Configuration Tool .
Alternately, click Start , All Programs , and then click the IOS Configuration Tool .
Select the Enable HP QuickWeb (or Enable IOS ) option, and click OK . Restart the computer.
The HP IOS program is now enable through HP QuickWeb.
remember to click the white kudos button for me if this helped you

I have an hp mini 210-4000 that has had no sound for 48 hours, little help?

Model: HP Mini 210-4000
O/S: Windows 7 (starter)
I have had no audio for about 48 hours now and am looking for some help please. At first I thought that it may have been a hardware failure but having done a system check windows is informing me that the internal speaker is enabled and that it is working normally. There has been no physical damage to the notebook either.
I have tried all of the standard troubleshooting techniques that are suggested and have tried restoring everything to the way it was about 4 days ago with no success.
The light next to the mute button has stopped lighting up no matter whether it is set to mute or not. In terms of the software if I perform standard tests and play audio through any programs it is being recognised by everything (speaker icon, 'beats' audio desk, applications etc) but there is just nothing to be heard.
The notebook is set to normally install automatic updates and I have seen from the forums that other people have been experiencing similar problems from across the board. Has an update been released that may have caused this?
Any help that people can offer in rectifying this problem that I'm assuming is software-based would be greatly appreciated. Cheers

Hi
Please try these steps and check and let me know if this works.
Resolving No Sound or Audio Problems in Windows
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Mini 210-2080nr touchpad help

Hello,
I recently bought a HP Mini 210-2080NR and I'm having difficulties with the touchpad. The right and left key is connected to the touchpad. When using the touchpad, I'm able to navigate with the entire touchpad including the keys and that is causing a huge inconvenience.
Is there a way to lock the right and left click keys on the touchpad, so I'm able to navigate smoothly? Thanks in advance.

Check if you have Accidental Contact Mitigation (ACM) feature in the Synaptics Properties Windows, that will help you set restrict the tap and pointer movement zone...So outside that zone, you can have more control over tap and pointer movement, To Activate the function, Click on Filter Activation Time, and set the Filter Activation Time to Zero Seconds and check.......Check below screenshot...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Netbook Mini 210-2070NR Recovery Help

Netbook has been working fine. Just went to start and it won't boot. Hit Esc and ran Hard Disk Diagnostics and received following
Failure ID 6C2PMG-59F5P9-9XL03F-60T503
Product ID: XG712UA#ABA
No start up CD. Everything came preloaded. Unit is less than a year old.
Running the Win 7 Startup software

You need to replace hard drive on the Notebook.Contact HP if the Notebook is still within warranty period else if the Notebook warranty has expired and If you have some knowledge on disassembling laptops , this can be done on your own.
The instructions for replacing hard drive on Mini 210 Notebook can be found at below link
http://h10032.www1.hp.com/ctg/Manual/c02619136.pdf
After the hard drive has been replaced, you can order USB recovery kit(Windows 7) from below link
https://warp2.external.hp.com/driver/dr_country_select.asp?Product=633217-002&lang=en&cc=us
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

HP Mini 210-4000 Blue Screen of Death PAGE_FAULT_IN_NONPAGED_AREA error

I've been up and down the Forums here with no specific luck, unfortunately, so I'm going to ask even if this has been queried and solved in another part of the site which I may have missed.
I am trying to sort out a friend's HP Mini Notebook, model HP Mini 210-4125sa. The machine started up well enough until a week ago, when it suddenly decided to blue screen.
The specific error message text displayed within the BSOD reads as follows:
PAGE_FAULT_IN_NONPAGED_AREA
TECHNICAL INFORMATION:
*** STOP: 0x00000050 (0x87E40000, 0x00000000, 0x92442B13, 0x00000000)
I can not boot past the Windows 7 loading screen - the load bar makes it two fifths up and that's it.
I had thought to try and recover the operating system, if at all possible, from what is apparently a recovery partition that is created on the HD ( i haven't worked with these machines before unfortunately), although i cannot figure how to get at this partition before the error hits.
Also, having attempted to download a piece of software from the HP USB Recovery Flash Disk Utility, i realise that it seems necessary to actually use this from the notebook itself, which is not possible.
Having started running the various onboard tests from the BIOS menu, the Hard Disk Test has just apparently failed (specifically the Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless).HP have not unfortunately been an awful lot of help as they wil only offer a one-off technician support call for forty quid, or to take the notebook away for repair, the cost of which is practically as much as the original cost of the hardware. I would of course prefer to try and sort this out myself but have hit a bit of a wall at the moment. Any suggestions would be fantastic, at this point.
This question was solved.
View Solution.

That hardware test for the hard disk is a dead giveaway of a failed item. A failed hard disk is a show stopper.
Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless) It is important information.
A corrupted NTFS volume (the hard disk) can also generate the " PAGE_FAULT_IN_NONPAGED_AREA error" stop message.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Replacement HP Mini 210-2006sa Keyboard in UK

Good day all.
Could someone please advise me where I can buy a new Replacement HP Mini 210-2006sa Keyboard in UK.
Thanks for your time.
Best Regards.

You need this:
For use in the United States #622344-001
The laptop was sold in the USA and there is an us keyboard but you are in the UK, am I right?
http://www.com-com.co.uk/hp/partlist/0048274.ihtml
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

WIN 7 Home Premium and a HP mini 210-1000!

Have mini 210-1000, refurb, came with a WIN 7 Starter, never did check and record the product key that came with...ERROR!
1. Went on line 12 days ago and purchased WIN 7 Home premium. Have spend HOURS on line with MS techs trying to get it to install. Came here before I waste any more time.
This machine has 1G RAM - CAN it install WIN 7 Home premium?
2. Since the last attempted install (MS using PowerISO Virtual Drive Manager (free download ver.), and which was UNsuccessful, my HP and MS now tell me that my WIN 7 Starter is 'not genuine' and they give me several options to obtain the product key.
The product key in control panel/status is not EVEN in the correct format and starts with 2 (unacceptable) zeros...
IF this machine was refurbed by HP or Contractor, does HP have a usable product key to return me to normal operation? Am having trouble re-reaching the MS tech, I believe HE's out of ideas...
ANYone know a guru ? Am not quite ready to invest $$$ to fix a mess that MS started - and it's a long, long story...which takes me back to the original question: am I asking my Notebook to install WIN 7 Home Premium when it's not able??
Thank you for any help you can provide!
Marty

Hi, Marty:
Please read the info at the link below and see if you can do a clean install of W7 HP.
http://randomwindowstips.wordpress.com/2009/12/05/windows-7-clean-install-upgrade-license-key-error-...
Paul

HP Mini 210-1000sa Track Pad Problem

I've just bought a HP Mini 210-1000sa and I'm finding the Track pad truely AWFUL to use - not at all up to the usual HP high quality.
As the left and right buttons are part of the track pad "sensitive" area, when you use one finger to position the cursor then touch the left button area with another finger the track pad will either:
a) move the cursor to a new position!
b) ignore your click because you already have a finger touching the pad (leading to having to make several click attempts!
c) it might work
A further problem is that although the buttons give a re-assuring "click", as they are part of the "sensitive" area of the pad, if your finger is too high on the paad (ie outside the marked area of the button), it will still "click" but nothing happens.
Is there an update (software or hardware) to fix this problem? I'm finding it unusable as it is, I have to use an external usb or bluetooth mouse. This partly defeats the object of having an ultra portable device!
Thanks for any help ...
Gavin
Gavin

Hi I bought recently HP Mini 210-1118TU laptop, I am observing that bottom of laptop is gettign very hot, I am not sure how to check whether fan is working or not, or how to check PCU temperature. What is the maximum temperature that it can go to, I am unable to enter bios settings by pressing Fn+F10, Pls help me with these issues, Regards Sabir

HP Mini 210-1010NR PC Not Booting

My sister found her HP Mini 210-1010NR PC recetly. She was using more her phone and a desktop. She ask me to check it but the computer don't boot. Don't give me any error messages or let me access the f keys options posted in another posts. When I turn it on make the regular noises and I can see a blinking white cursor like line. The computer use Windows 7 Starter (32-bit). I will like to make a factory restore to the notebook.
I try to order the System Recovery Kit for Consumer Notebook (2 Discs) but the system don't allow me.
Thanks

Hi Darkfirepr,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 210-1010NR and start up issues. Here is a link to troubleshoot the HP Mini. Before starting please disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My HP mini 210 will not boot up. The repair utility starts, but runs and runs with no results.

My HP mini 210-2080NR will not boot up. The repair utility starts, but runs and runs with no results. Safe mode start up also fails. Tried BIOS diagnostics with f10, memory passed, but HD startd but did not finish. Diagnostic log shows rusult 0303. Any ideas would be helpful. Thanks.

You can order HP recovery media here, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx

Install windows on my HP Mini 210-400, dont work because no driver?

Hello,
I tried to install a new Windows on my (titel) HP mini 210-4000, so if I start the installation and come to the Harddriver selection, pick a driver, windows said, that AHCI-driver are missing.
In the BIOS of this Netbook I can't change the Harddrivermode tho IDE, because I don't have this option......-.-
What have I to do now?

Try it again.
BTW..What is the complete product name and product number of your mini. At the end of what you posted there are characters missing. It helps us when we know the exact hardware configuration and we can get that from the product number.
This time use the installer to delete the existing partition create a new partition and format it as NTFS.
Download the Intel Rapid Storage software on another PC and extract the SATA AHCI drivers. You can use either Winrar or WinZip to do that. If you do this ,then you can install the AHCI drivers that you wanted to install before at the F6 install drivers stage of the installation. You will have to go into the registry and check a specific key later on after the install.
You may have to do this a couple of times til it works. Sometimes it takes practice. It is actually pretty simple to run a dual boot of Windows 7 (32-bit) and Linux (Ubuntu)
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Help on HP Mini 210

Similar Messages

Maybe you are looking for