Help on Installing Oracle 8i release 3(8.1.7) on RedHat Linux 7.2
Hi,
I am trying to install 8.1.7 on RedHat 7.2. I completed the preparatory steps. When I begin the installation with ./mnt/cdrom/runInstaller. I get the following message:
Intializing Java Virtual Machine from ../stage/components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait.... and it stops. The installation guide doesn't mention anything about the jre. Ane no repsonse from metalink. Please help on how and where to find and if possible a detailed steps that needs to be taken. Help will be greatly appericiated.
M
Hi,
This can be solved by adding following environment variable in
.bash_profile
LD_ASSUME_KERNEL=2.2.5
export LD_ASSUME_KERNEL
After adding , just relogin as oracle user and run the installation. It will proceed without any problem. (If u get any linker error u need run the patch glibc2.1.3stubs.tar.gz file from OTN downloads).
Bye
In case of any problem, mail me at [email protected]
With Regards,
P.L. Kannan
Similar Messages
-
Need help in installing Oracle 9i Release 2 in RHLE3
Hi All
I need some patches to Install Oracle 9i (9.2.0.1.0) in RHEL3.
I know that they are in metalink, but I don't have login to metalink site...
I need some patche files...
p3006854_9204_LINUX.zip
p3095277_9204_LINUX.zip
p3119415_9204_LINUX.zip
p2617419_210_GENERIC.zip
Could somebody send them to email, my email address is [email protected]
Thanks
MohanaIf you really need to install Oracle 9i and not one of the more current versions of 10g, why don't you use the download from OTN which is 9.2.0.4. and should already have these patches included
http://www.oracle.com/technology/software/htdocs/devlic.html?http://otn.oracle.com/software/products/oracle9i/htdocs/linuxsoft.html -
Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine
Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
RiziHi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios -
How to install Oracle 10g release 2 on rhel4 release 2
I want to know How to install Oracle 10g release 2 on rhel4 release 2 from scratch from the partitioning of the disk in rhel 4 till the post installation .
System Configuration
x86 32 bit
Pentium(R) 4 CPU 3 ghz
RAM 1 GB 2.99Ghz
Oracle 10g release 2
rhel 4 release 2
Please reply me soon.
With Regards
Suvin Prathab
www.sceneworks.co.ccDear Suvin Prathab!
Please have a look at this:
[http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html]
Yours sincerely
Florian W. -
When will be can we install Oracle 10g Release 2
I have use redhat Enterprise 4, 2.6 kernel. I had installed Oracle 10g Release 1, but I cant run dbca, I need new version of Oracle, So can you tell me what time will be can I reach Oracle release 2??
hi, my error messages about dbca;
/u01/app/oracle/product/10.1.0/Db_1/bin/dbca: line 164: 3984 Ä°ptal edildi $JRE_DIR/bin/java -DORACLE_HOME=$OH -DJDBC_PROTOCOL=thin -mx64m -classpath $CLASSPATH oracle.sysman.assistants.dbca.Dbca $ARGUMENTS
What must I do? do you have any advice for this problem?
I am wait your answer?? -
Installing oracle 9i release 2 on RH Linux Enterprise 4
I am trying to install oracle 9i release and get an error with glibc - does anyone know what I need to do to a fresh installation of Enterprise 4 to install oracle 9i?
Thanks in advance.See http://www.puschitz.com/InstallingOracle9i.shtml#RunningOracleInstallationOnRHELAS4
-
Installing Oracle 9i Release 2 Personal Edition
I am trying to install Oracle 9I Release 2 Personal Edition on my home computer (Windows XP). I get to the Database Configuration screen, it processes up to Authentication and Encryption - 93%, then I get an Error - The following running services need to be shutdown before continuing: OracleMTSRecoveryService. I have attempted several times to shut it down, to no avail.
Can anyone give me suggestions on what to do?XP Professional, or XP Home?
There are a lot of cases where people have tried and failed to install on XP Home. Also a few successes.
Also, how is your firewall and anti-virus software configured. Those may be blocking your install process. -
Error In installing Oracle E-Business suite 11.5.10.2 on Linux enterprise 5
Gurus
I am getting this error when i ma tryin to run this setup on linux..What can be the possible errors..
runProcess_5
Statusstring Executing Command: InstantiateFile -d addbtmpl.drv
Cannot execute configure of environment for database ORACLE_HOME
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Succesfully changed Permissions for /home/oracle/proddb/9.2.0/appsutil/log/PROD_computer1
Processing DriverFile = /home/Stage11i/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /home/Stage11i/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /home/Stage11i/startCD/Disk1/rapidwiz/template/adrun9i.sh
dest : /home/oracle/proddb/9.2.0/temp/PROD_computer1/adrun9i.sh
backup : /home/oracle/proddb/9.2.0/temp/PROD_computer1/adrun9i.sh to /home/oracle/proddb/9.2.0/appsutil/out/PROD_computer1/templbac/adrun9i.sh
setting permissions: 755
setting ownership: oradata:dba
instantiate file:
source : /home/Stage11i/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /home/oracle/proddb/9.2.0/temp/PROD_computer1/adrundb.sh
backup : /home/oracle/proddb/9.2.0/temp/PROD_computer1/adrundb.sh to /home/oracle/proddb/9.2.0/appsutil/out/PROD_computer1/templbac/adrundb.sh
setting permissions: 755
setting ownership: oradata:dba
Step 0 of 5
Command: /home/oracle/proddb/9.2.0/temp/PROD_computer1/adrun9i.sh
Step 1 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has succeeded
Processing Step 1 of 5
Executing: su oradata -c "/home/oracle/proddb/9.2.0/temp/PROD_computer1/adrun9i.sh APPS APPS"
STARTED INSTALL PHASE : 9i RDBMS : Wed May 2 19:51:45 IST 2007
runProcess_5
Statusstring Executing Command: InstantiateFile -d addbtmpl.drv
Cannot execute configure of environment for database ORACLE_HOME
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Please help
Regards
NitinYou might manage to have it running with some workarounds but keep in mind that it is not supported as stated before in some other post.
Can we install Oracle E-Business Suite 11.5.10.2 On Linux 5
Can we install Oracle E-Business Suite 11.5.10.2 On Linux 5 -
Can we install Oracle E-Business Suite 11.5.10.2 On Linux 5
Gurus
Can we install Oracle E-Business Suite 11.5.10.2 On Linux 5
Regards
Nitinaccording to meatlink yes it cretifed you can go for it
Red Hat Enterprise AS/ES 3 11.5.10.2 (11i) 8.0.6 Certified
fadi hasweh
http://oracle-magic.blogspot.com/
Oracle is not Magic, it just takes years of experience -
Can I Install OAS 10.1.3.1 32 bit on Redhat Linux 64 bit ?
Hi all,
Can I Install OAS 10.1.3.1 32 bit on Redhat Linux ES 4 (64 bit) ?
Thank you for your help,
xtantoI am sure, this is possible.
I wouldn't advice you to waist resources with 32-bit software on your 64-bit OS, but if you want to, you can. -
Installing oracle 10g release 2 on spark solaris!! urgent help!
hi guys!
Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpcreates
Edited my kernel parameters and in the /etc/system file, ai've added
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
Space aint an issue and dont know how to over come this error!
Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
junior DBA in distress.This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
-Ramesh -
How to install Oracle 10g Release 2 (10.2) for RHEL 5
Hello Guys,
I want to install Oracle® Database 10g Release 2 (10.2) for Linux x86-64 in RHEL 5
Please experience people guide me ... please don't give me http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm (Oracle® Database Installation Guide 10g Release 2 (10.2) for Linux x86-64) link i already gone through but it's to much in depth and not able to understand what is that i can use from this.
My Machine is having 12GB RAM and it's 64bit machine.
So please provide me steps that only relate to my oracle installation. I just want to do simple installation without database and my machine not have graphical interface also.
Send me your generic steps that i can run on my machine. if you want information about my system specification please ask.
So please people help me out... i am really thankful to you guys .....
Thanks ,
ORACLE DBA PThat also good idea man. thanks for your valuable advice.
I have confusion here ...
3. Changes to be made to Kernel parameters
After installing above mentioned packages, we need to change some Kernel parameters and make them match to Oracle requirements. Parameters which should be changed are shown below
shmmax 2147483648
shmmni 4096
shmall 2097152
shmmin 1
semmsl 250
semmns 32000
semopm 100
semmni 128
file-max 65536
ip_local_port_range 1024 65000
rmem_default 1048576
rmem_max 1048576
wmem_default 262144
wmem_max 262144
We do all these changes in the /etc/sysctl.conf file by adding these lines to that file:
kernel.shmmax = 2147483648
kernel.shmall = 2097152
kernel.shmmni=4096
kernel.sem=250 32000 100 128
fs.file-max=65536
net.ipv4.ip_local_port_range=1024 65000
net.core.rmem_default=1048576
net.core.rmem_max=1048576
net.core.wmem_default=262144
net.core.wmem_max=262144
Question: What will be my value for this as my system is 64bit so this all parameter is ok if i put all straight ?
----> Setting Shell limits for the Oracle UserTo improve the performance of the software on Linux systems, you must increase the following shell limits for the oracle user:
1. Add the following lines to /etc/security/limits.conf file
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
2. Add the following lines to /etc/pam.d/login file
session required /lib/security/pam_limits.so
session required pam_limits.so
3. In order to use Oracle Software, we need to make a change in “oracle” user’s buffer size and number of opened file descriptors. In order to do it, we add below lines to /etc/profile file
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
Question: this things also i need to change ? -
Hi,
I am trying to install Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Linux x86-64.
I have installed weblogic 10.3.5 generic jar file.
When i try to install forms and reports server the configuration step fails while creating weblogic domain.
Please help me installing portal and reports.
Is there any patch i am missing or the weblogic version is incorrect?
Thanks.You cannot configure Fmw 11.1.1.2 against WLS 10.3.5. They are not supported nor compatible.
If you want to use WLS 10.3.5, you need to "install" 11.1.1.2, but do not configure. That is an installation option. After you have successfully installed 11.1.1.2 you will need to patch it to 11.1.1.6. After patching, you then can run the configuration (config.bat).
http://docs.oracle.com/cd/E23943_01/install.1111/e10421/install.htm#CLINS256
Version 11 is far more complex than previous versions. I strongly encourage everyone to review the product documentation before trying to install. You can also refer to the following MyOracleSupport note:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1) -
Installing Oracle 10g release 2 on RHEL4
I am new with Linux and Oracle, and I have been assigned to install Oracle 10g Rel 2 in RHEL4 OS.
I have checked and installed missing RPM's and created group users, passwd, configered Kernel, set Shell limits and finally created directories on root as so,
mkdir -p /u01/app/oracle
chown -R oracle:oinstall/u01/app/oracle
chmod -R 775 /u01/app/oracle
After, I mount the CD on root
mount /media/cdrom
After mounting is complete i enter into oracle user and do the following
su - oracle
cd /media/cdrom
./runInstaller
However, I receive the following message : Olite installation requires ORACLE_HOME to be set. PLease set it and retry again.
So I set the following like so,
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle
export ORACLE_SID= demo1
./runInstaller
I than get the following message.
Olite installation requires JAVA13_HOME to be set. PLease set it JDK 1.4.1 install area and rety again.
I am not sure what JAVA13_HOME is but I am wondering if it is related to some Mobile sync. Also, could somebody help me and advise if I am going in the right direction here?
Many thanks in advance.
AlexHi Alex
Can you please control that ?
JAVA13_HOME will be the location for your JAVA home. You can check the path for your java installtion, either 1.3 or 1.4 and set the path accordingly. Usually in Linux the path will be some thing like /local/java/jdk1.4.2.
TNS_ADMIN should point to $ORACLE_HOME/network/admin
Please read that also http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm
Let us know if it helps you.
thanks -
Unable to install Oracle 11g Release 2 in windows 7 64 bit OS
Hi,
Am trying to install the oracle 11g Release 2 database on my Laptop,
I have downloaded the two zip files from Oracle Site
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
After downloading I have unzipped started process, but after some process, am getting an error mentioning that, am missing a file in the below location
C:\$Oracle_BASE$\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications
but my unzip is successful for both the files, Please let me know why am getting this error when I have downloaded the files from Oracle site, Please let me know if I need to have
any additional s/w installed on my machine before running the Oracle database installation
Thanks973946 wrote:
Thanks Srini,
After checking the link, I was able to install it but there were some error messages.
I have another problem log in the SQL PLUS. When I open the SQL PLUS window, it asked for Username and after I typed "sys" or "system" and hit Enter; it was prompted for password, however, it did not let me type in any word; and after I hit Enter again, the error message " ORA-12560: TNS:protocol adapter error" appeared
Any hints would be apprecieted, thanks.
SamIt wasn't preventing you from typing a password, it just wasn't echoing your keystrokes back to the screen. This is a security security feature common to most software, not just oracle. Either when asking for a password, either echo back a 'masking' character like '*' or don't echo anything. It's so common, I'm surprised you seem to have never seen it before.
So after entering your password ... the 12560 probably comes from
1- the fact you didn't have the environment variable ORACLE_SID set, so sqlplus didn' know the name of the instance/process you wanted to connect to, or
2 - the windows service for the database was not started.
Those two possibilities account for 99.99999 pct of ora-12560 on Windows installations.
Edited by: EdStevens on Nov 29, 2012 6:41 PM
Maybe you are looking for
-
Adobe Air Installation Problem Exit Code 7
I know this issue has been posted before but the solutions in those discussions (Windows Installer Cleanup or Microsoft FixIt Uninstall-Install) do not work. I am in an Enterprise environment and need to get Air updated on all of our computers. Even
-
I am trying to transfer songs to windows and it is saying that the origianl file can not be found
I am having an issue trying to take my songs from Itunes to a mp3 version. I am getting a window that says "None of the selected files were converted because they can not be found" I am not really sure what to do? I also get a message that says the
-
Read all rows in static table defined in the adobe form using webdynproABAP
Hi all, The requirement is i have to display the 5 empty rows using adobe forms in the table format and retrieve the data from that 5 rows after user enter some value and post it in the database table. This is the part of my requirement. I have done
-
Problems saving files in Snow Leopard
I've just upgraded from Leopard to Snow Leopard (I know I'm a dinosaur...) and am now having major problems saving Appleworks files. When I'm doing corrections, I sometimes need to save a file over 10 times and my helpful "Do you want to replace thi
-
When I email from my browser it only lets me email from default phone email app or from the web. I want to click the button and either get options as to which app I want to use or have it automatically go to my gmail app