Help on my s10: missing audio device and non working built in camera

According to Lenovo, XP Home has a conflict with the built in camera of some S10 and they have a Bison patch to solve it.
I already downloaded the bison update and realtek audio driver. Still it didnt work!
I checked the audio folder. No audio device found! What could be the problem? Checked the Device manager only bluetooth related devices were found.
Please help. Ty!
-Mike
Newbie
S10 w/6 cell battery, 160G hard disk, WindowsXP Home, etc.
Message Edited by msdelr on 01-12-2009 05:49 PM

brilami,
Here is the link to the S10 support site with all applicable drivers.
You should be able to download theRealtek audio driver from that page.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

IChat and non-Apple built in cameras

Hello,
I am thinking about purchasing a new Mac Mini for my son and am looking a getting a non-Apple monitor with a built in camera. Specifically a Dell monitor. I am wondering if iChat will recognize and work with the camera in a Dell monitor. Any help would be appreciated.
thanks,
pat

Hi,
There are post about Dells that don't work in this fashion.
5:06 PM Saturday; April 19, 2008

When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?

When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?

Macs have crazy headpne jacks in different models.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

My ipod overheated on audio device and will not start

I had my Ipod classic connected to an audio device and it became very hot and since will not turn on-did I fry it?

Possibly. How long have you let it sit and cool? After leaving it to charge for a minimum of 30 minutes, did you try and reset the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
B-rock

Audio device is not working, i have installed proper drivers, but audio device is not working

hi,
I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system, My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

Tecra A8
Model No = PTA83L-04C02N
Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
Good luck!
-Jerry

My audio device is not working

hello
I don't know the reasone behind it but my audio device is not working but I rember accedentally i uninstail my IDT audio device.

Hello rasfunkey,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have uninstalled your audio drivers and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

[SOLVED] Default audio device no longer works after reboot

After today's reboot, the audio device no longer works. E.g., VLC says:
Audio output failed:
The audio device "default" could not be used:
No such file or directory.
This is the console log:
[0x1394138] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
[0x7fac180069c8] pulse audio output error: PulseAudio server connection failure: Connection refused
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[0x7fac180069c8] alsa audio output error: cannot open ALSA device "default": No such file or directory
[0x7fac180069c8] jack audio output error: failed to connect to JACK server
[0x7fac180069c8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7fac180069c8] main audio output error: no suitable audio output module
[0x7fac40fa4db8] main decoder error: failed to create audio output
[0x7fac180069c8] pulse audio output error: PulseAudio server connection failure: Connection refused
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[0x7fac180069c8] alsa audio output error: cannot open ALSA device "default": No such file or directory
[0x7fac180069c8] jack audio output error: failed to connect to JACK server
[0x7fac180069c8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7fac180069c8] main audio output error: no suitable audio output module
[0x7fac41055118] main decoder error: failed to create audio output
The strange thing is that the sound card does in fact work; e.g. the sound test for "HDA Intel PCH", the first entry in my KDE Audio Settings, works. But the entry "default" does not and I suppose that is also the device that VLC is complaining about.
I've tried blacklisting the HDMI driver and switched to the other audio output modules in VLC. I've also checked I'm still member of the "audio" group.
Edit:
P.S. Solved this myself. I had a USB-to-MIDI adapter cable plugged in during boot, which seems to have been causing these problems. I suppose systemd thought it was a USB sound card? I was wondering why dmesg said something about USB sound when the computer doesn't have any USB sound devices. Hardware detection epic fail. Although I guess the cable counts as a MIDI device at least, so in a way it's correct.
So it looks like I'll always have to unplug the MIDI cable before rebooting.
Last edited by Morn (2012-11-23 19:24:00)

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help...

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.

Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
The usual troubleshooting steps are, also remember to test it after every step:
1. Restart
2. Reset
3. Restore from backup
4. Restore as new.
If no joy, make an Appointment with the Apple genius and have them evaluate

USB audio device is not working (code 10)

USB audio device is not working (code 10)

dominichristine wrote:
USB audio device is not working (code 10)
where do you get this error code? do you see this when you plug in
a USB device or does it show up with out anything plugged in?

On my iPod touch why does it only allow one earphone to play? I've plugged the ear phone kno another device and they worked perfectly fine what is wrong with my iPod

On my iPod touch why does it only allow one earphone to play? I've plugged the ear phone kno another device and they worked perfectly fine what is wrong with my iPod

- Try inserting and removing the headphone plug a dozen or so times.
- Next try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that indicates a hardware problem, like a bad headphone jack.

Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked.

Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I have tried on a windows and a mac and noticed no change. I have tried restoring to a backup but that didn't help. I haven't had time to do a full restore but I will try if the problem persists.

An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Completely frustrated with downloan not working and deleting and attempting to reinstall resulting in three different accounts on my computer and none working.

I downloaded Firefox mobile to my Droid. Connected to computer and followed instructions, using code provided on phone. Did not work. I tried to re-sync phone. It didn't work. I deleted Firefox on phone and reinstalled app. The connected phone to computer to re-sync. Could not get anything to work using"I have an account" tab so opened up another sync account. It didn't work. I deleted app again and tried again and used a third sync account to sync phone with computer. I got nowhere. Completely frustrated with three sync accounts and none working.
Need help to delete all accounts and start over. Can't seem to find a way to do this.
Thanks in advance.
Bill

Colin,
I tried this (opening in Photoshop CS5 and resaving as jpg) as you mention:
The remedy to this problem has usually been to open the image (the one that is having an identity crisis) in Photoshop or another image editor, and simply resave it. You don't need to edit it or rename it or anything--just open and resave.
Re-imported and it does work fix (I get picture1 and picture2 instead of just picture1 for all pictures).
Having said that, I looked at all the file properties I could for:
picture1.jpg (original)
picture1.jpg (resaved in CS5)
To see what changed. All are properties are identical (color depth, pixel size, etc.) except that resaved image is ~20% larger (I saved max file size jpg in CS5).
So original is ~6MB
resaved jpg is ~8MB
So the question - why can't CS5 premiere import these directly (with resaving?) and what is working with the resave that locks up the first time?
These pictures are straight from a Canon 50D, with no editing or resaving - dumped off camera to computer. I can reproduce this error 100% of the time (new project, new folder, import 2 pics) so it isn't something goofy with the way I'm importing - 100% how premiere is handling this.
Very disappointed that I now need to open/resave/rerender each of ~1100 images to simply use them. Given that these jpgs are being produced by a mainstream camera with support image format.
Any thoughts?

Licensing has stopped working - I tried all the published options and none work. Acrobat 9 Pro Mac Air 10.9.5

Licensing has stopped working - I tried all the published options and none work. Acrobat 9 Pro Mac Air 10.9.5
Thank you for your help

Hey,
Considering error "licensing has stopped working", you might need to try out the solutions mentioned in the following KB doc link:
Error "Licensing has stopped working" | Mac OS
Let me know if this helps.
Regards,
Anubha

Calculate Date/Time Difference in a Calculated Column Omitting Weekends, Holidays and Non-Working Hours

I am looking for a formula to use in a calculated column that calculates the difference between two date/time fields while excluding weekends, holidays and non-working hours
6/1/2010 9:43 AM - 6/7/2010 1:45 PM
Here is the closest that I have gotten; however, this formula gives me a result of 96:
=IF(AND((WEEKDAY([Resolved Date],2))<(WEEKDAY(Created,2)),((WEEKDAY(Created,2))-(WEEKDAY([Resolved Date],2)))>1),(((DATEDIF(Created,[Resolved Date],"D")))-(FLOOR((DATEDIF(Created,[Resolved Date],"D")+1)/7,1))-3),(((DATEDIF(Created,[Resolved Date],"D")))-(FLOOR((DATEDIF(Created,[Resolved
Date],"D")+1)/7,1)*2))*24)
Any and all assistance is greatly appreciated!

I don't know how to exclude holidays but i exclude weekends(Sat&Sun)-
IF(ISERROR(DATEDIF([Start Date],[End Date],”d”)),””,(DATEDIF([Start Date],[End Date],”d”))+1-INT(DATEDIF([Start Date],[End Date],”d”)/7)*2-IF((WEEKDAY([End Date])-WEEKDAY([Start
Date]))<0,2,0)-IF(OR(AND(WEEKDAY([End Date])=7,WEEKDAY([Start Date])=7),AND(WEEKDAY([End Date])=1,WEEKDAY([Start Date])=1)),1,0)-IF(AND(WEEKDAY([Start Date])=1,(WEEKDAY([End Date])-WEEKDAY([Start Date]))>0),1,0)-IF(AND(NOT(WEEKDAY([Start Date])=7),WEEKDAY([End
Date])=7),1,0))
-Thanks
Swapnil

Changing working and non-working days

Hi
I am trying to make a permanent (default) change in working and non-working days. I am living in Israel and our non-working days are friday and saturday. I want to configure these as the non-working days so I won't need to do it manually via the change work
time menu.
Thanks
Chen

If you are using project server then you can do it permanent from
PWA --> Server Settings --> Enterprise Data --> Enterprise Calendar then
You can configure either your stranded calendar or create a new calendar in which you can make Sunday to Thursday as working days and Friday and Saturday as non working days.
You have to do it manually. There is no tool available which will do the same for you.
Where as if you are using Microsoft Project professional stand alone then for every plan (MPP file) you have to do it.
kirtesh

Help on my s10: missing audio device and non working built in camera

Similar Messages

Maybe you are looking for