!! Help on OCIAttrGet() !!
Hi,
Can you please tell me how I can use OCIAttrGet() to get the
rowid of the particular row
fetched and subsequently bind it to an update statement. I am
getting an Invalid rowid error
However, if i select rowid in the select statement and bind this
retreived rowid in my update statement
it works fine.
Looks like the query expects rowid to be in string format.
Is there any way to convert Rowid to String?
I am using Oracle 8i.
Can you please help ?
Regards
Geeta
null
Hi Nilesh,
If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
Extract/ Load table
Insert location method : require IQ servers to be entered in interfaces file
Backup/Restore : copy entire database content
If you have not the DDLs, you can generate them using IQ cockpit or SCC.
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
Regards,
Tayeb.
Similar Messages
-
Linux64 c Oracle10.2.0 OCIAttrGet error! help me!!!!
I use oci to do ":select total_rate_units,file_seq,org_size,to_char(INSERT_TIME) as insert_time from stl_usr.t_file_info_17 where rownum<10;" , allways get more attr.
example:
OCIAttrGet(pard, OCI_DTYPE_PARAM, &col_name, &col_name_len, OCI_ATTR_NAME, R->err);
get:
col_name:TOTAL_RATE_UNITSFILE_SEQORG_SIZEINSERT_TIME,colnamelen:16
table :
create table T_FILE_INFO_17
FILE_ID NUMBER(9) not null,
STATE VARCHAR2(4),
INSERT_TIME DATE,
BILL_CYCLE_SEQ NUMBER(33),
ORG_REC NUMBER(10),
BAD_REC NUMBER(10),
INS_REC NUMBER(10),
INS_USE_REC NUMBER(10),
GENERAL_LEVEL NUMBER(8),
ROLLBACK_COUNTS NUMBER(8),
INS_BAD_REC NUMBER(10),
STATE_TIME DATE,
ORG_SIZE NUMBER(12),
FILE_NAME VARCHAR2(40) not null,
PROC_START_TIME DATE,
INSERT_SETTLE NUMBER(14),
PARENT_FILE_ID NUMBER(10) not null,
RAT_FIRST_STARTTIME NUMBER(14),
RAT_LAST_ENDTIME NUMBER(14),
REMARK VARCHAR2(100),
FILE_SEQ NUMBER(10),
NUMBER_LEN NUMBER(3),
FILE_NAME_TIME DATE,
BILL_CYCLE_SEQ_MARK NUMBER(33),
RAT_FIRST_CALLING_NBR VARCHAR2(30),
RAT_LAST_CALLING_NBR VARCHAR2(30),
CITY_ID NUMBER(8),
DEL_REC NUMBER(10),
FILE_CLASS_ID NUMBER(8),
CDR_SELECT_RULE_ID NUMBER(8),
NOTE_NUM NUMBER(4),
PROVINCE_ID NUMBER(4),
OPERATION_TYPE_ID VARCHAR2(8),
OPERATION_TYPE_GRADE NUMBER(8),
FLOW_ID NUMBER(8),
TOTAL_RATE_DURATION NUMBER(12),
TOTAL_RATE_AMOUNT NUMBER(12),
TOTAL_RATE_UNITS NUMBER(12),
TOTAL_RATE_COUNTS NUMBER(12),
TOTAL_STL_DURATION NUMBER(12),
TOTAL_STL_AMOUNT NUMBER(12),
TOTAL_STL_UNITS NUMBER(12),
TOTAL_STL_COUNTS NUMBER(12),
RATE_MACHINE_IP VARCHAR2(30),
INSERT_IP VARCHAR2(30),
FME_TOTAL_REC NUMBER(10),
FMT_BAD_REC NUMBER(10),
FMT_TOTAL_REC NUMBER(10),
INS_NORATE NUMBER(10),
INS_NOSTS NUMBER(10),
COL_SITE_ID NUMBER(10)
src :
char *col_name=NULL;
ub4 col_name_len;
R->lastError = OCIAttrGet(pard, OCI_DTYPE_PARAM, &col_name, &col_name_len, OCI_ATTR_NAME, R->err);
printf("printf Oarcle ---->%d:%s,colnamelen:%d\n",i,col_name,col_name_len);
if(strlen(col_name)!=col_name_len){
//substr( col_name, col_name, 1, col_name_len );
printf("Oarcle ---->%d:%s,colnamelen:%d\n",i,col_name,col_name_len/*,*/);
// substr( col_name, col_name, 1, col_name_len );
if (R->lastError != OCI_SUCCESS)
continue;
#if defined(ORACLE_COLUMN_NAME_LOWERCASE) && ORACLE_COLUMN_NAME_LOWERCASE > 1
R->columns[i-1].name = CALLOC(1, col_name_len);
OCIMultiByteStrCaseConversion(R->env, R->columns[i-1].name, col_name, OCI_NLS_LOWERCASE);
printf("%d:YES!!!!,%s\n",i,R->columns[i-1].name);I use oci to do ":select total_rate_units,file_seq,org_size,to_char(INSERT_TIME) as insert_time from stl_usr.t_file_info_17 where rownum<10;" , allways get more attr.
example:
OCIAttrGet(pard, OCI_DTYPE_PARAM, &col_name, &col_name_len, OCI_ATTR_NAME, R->err);
get:
col_name:TOTAL_RATE_UNITSFILE_SEQORG_SIZEINSERT_TIME,colnamelen:16
table :
create table T_FILE_INFO_17
FILE_ID NUMBER(9) not null,
STATE VARCHAR2(4),
INSERT_TIME DATE,
BILL_CYCLE_SEQ NUMBER(33),
ORG_REC NUMBER(10),
BAD_REC NUMBER(10),
INS_REC NUMBER(10),
INS_USE_REC NUMBER(10),
GENERAL_LEVEL NUMBER(8),
ROLLBACK_COUNTS NUMBER(8),
INS_BAD_REC NUMBER(10),
STATE_TIME DATE,
ORG_SIZE NUMBER(12),
FILE_NAME VARCHAR2(40) not null,
PROC_START_TIME DATE,
INSERT_SETTLE NUMBER(14),
PARENT_FILE_ID NUMBER(10) not null,
RAT_FIRST_STARTTIME NUMBER(14),
RAT_LAST_ENDTIME NUMBER(14),
REMARK VARCHAR2(100),
FILE_SEQ NUMBER(10),
NUMBER_LEN NUMBER(3),
FILE_NAME_TIME DATE,
BILL_CYCLE_SEQ_MARK NUMBER(33),
RAT_FIRST_CALLING_NBR VARCHAR2(30),
RAT_LAST_CALLING_NBR VARCHAR2(30),
CITY_ID NUMBER(8),
DEL_REC NUMBER(10),
FILE_CLASS_ID NUMBER(8),
CDR_SELECT_RULE_ID NUMBER(8),
NOTE_NUM NUMBER(4),
PROVINCE_ID NUMBER(4),
OPERATION_TYPE_ID VARCHAR2(8),
OPERATION_TYPE_GRADE NUMBER(8),
FLOW_ID NUMBER(8),
TOTAL_RATE_DURATION NUMBER(12),
TOTAL_RATE_AMOUNT NUMBER(12),
TOTAL_RATE_UNITS NUMBER(12),
TOTAL_RATE_COUNTS NUMBER(12),
TOTAL_STL_DURATION NUMBER(12),
TOTAL_STL_AMOUNT NUMBER(12),
TOTAL_STL_UNITS NUMBER(12),
TOTAL_STL_COUNTS NUMBER(12),
RATE_MACHINE_IP VARCHAR2(30),
INSERT_IP VARCHAR2(30),
FME_TOTAL_REC NUMBER(10),
FMT_BAD_REC NUMBER(10),
FMT_TOTAL_REC NUMBER(10),
INS_NORATE NUMBER(10),
INS_NOSTS NUMBER(10),
COL_SITE_ID NUMBER(10)
src :
char *col_name=NULL;
ub4 col_name_len;
R->lastError = OCIAttrGet(pard, OCI_DTYPE_PARAM, &col_name, &col_name_len, OCI_ATTR_NAME, R->err);
printf("printf Oarcle ---->%d:%s,colnamelen:%d\n",i,col_name,col_name_len);
if(strlen(col_name)!=col_name_len){
//substr( col_name, col_name, 1, col_name_len );
printf("Oarcle ---->%d:%s,colnamelen:%d\n",i,col_name,col_name_len/*,*/);
// substr( col_name, col_name, 1, col_name_len );
if (R->lastError != OCI_SUCCESS)
continue;
#if defined(ORACLE_COLUMN_NAME_LOWERCASE) && ORACLE_COLUMN_NAME_LOWERCASE > 1
R->columns[i-1].name = CALLOC(1, col_name_len);
OCIMultiByteStrCaseConversion(R->env, R->columns[i-1].name, col_name, OCI_NLS_LOWERCASE);
printf("%d:YES!!!!,%s\n",i,R->columns[i-1].name); -
Urgent help with ORA-01062: unable to allocate memory for define buffer
Hello, Folks!
I have a c++ code that is using OCI API that is running both in
windows and in spark.
(The same c++ code compiled and running in both platforms)
and asking the same query.
In windows, everything is OK but in spark
it failes...
The ORACLE Server is installed on win2003 station
Both client and server ORACLE version is 10.2.0.1.0
The code is running on spark(oracle instant client is installed)
This query is a simple select query that selects only one field
of type VARCHAR2(4000) (the same problem with happen with any
string type field larger than 150 characters)
The error occured when calling for OCIDefineByPos method
when associating an item in a select-list with the type and output
data buffer.
The error message is: ORA-01062: unable to allocate memory for define
buffer
(This error message signifies that I need to use piecewise operation...)
But it happens even if I make this varchar2 field to be of size larger
than 150.
It is not fair to use piecewise fetch for such a small fields sizes.
May be there is not configuration setting that can enlarge this
I know that I wrote here a very superficial description.
If somebody knows something about this issue, please help
ThanksI had a special luck today after searching the solution per weeks:)I have got a solution.
When I get the size of the oci field, in the following expressioin
l_nResult = OCIAttrGet(l_oParam->pOCIHandle(), OCI_DTYPE_PARAM, &(orFieldMD.m_nSize), NULL, OCI_ATTR_DATA_SIZE, m_oOCIErrInfo.pOCIError());
orFieldMD.m_nSize was of type ub4 but according the manual it must be ub2.
As a result, the number returned was very large (junk?) and I passed this value to OCIDefineByPos
Now I changed the type and everything is working!!!
In windows there is not problem with this expression :)
Thanks
Issahar -
Hi,
was there any change in the OCIAttrGet method for OCI_ATTR_PRECISION and OCI_ATTR_SCALE between 9.2.0.1 and 9.2.0.4 on Solaris?
It seems I get different return values for a NUMBER datatype.
Thanks, JoernI haven't seen a difference in behavior before. Can you provide the table create statement, the column being described, and the OCI code being used to describe it?
Have you tried upgrading to the latest patchset for 9.2? Sometimes this helps, because you can pick up some bug fixes. -
Problem with threads and simulation: please help
please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
private JButton choices[];
private String names[]={"line", "square", "oval"};
private JPanel buttonPanel;
private DrawPanel drawingArea;
private int width=300, height=200;
public void init(){
drawingArea=new DrawPanel(width, height);
choices=new JButton[names.length];
buttonPanel=new JPanel();
buttonPanel.setLayout(new GridLayout(1, choices.length));
ButtonHandler handler=new ButtonHandler();
for(int i=0; i<choices.length; i++){
choices=new JButton(names[i]);
buttonPanel.add(choices[i]);
choices[i].addActionListener(handler);
Container c=getContentPane();
c.add(buttonPanel, BorderLayout.NORTH);
c.add(drawingArea, BorderLayout.CENTER);
}//end init
public void setWidth(int w){
width=(w>=0 ? w : 300);
public void setHeight(int h){
height=(h>=0 ? h : 200);
/*public static void main(String args[]){
int width, height;
if(args.length!=2){
height=200; width=300;
else{
width=Integer.parseInt(args[0]);
height=Integer.parseInt(args[1]);
JFrame appWindow=new JFrame("An applet running as an application");
appWindow.addWindowListener(
new WindowAdapter(){
public void windowClosing(WindowEvent e){
System.exit(0);
DrawShapes appObj=new DrawShapes();
appObj.setWidth(width);
appObj.setHeight(height);
appObj.init();
appObj.start();
appWindow.getContentPane().add(appObj);
appWindow.setSize(width, height);
appWindow.show();
}//end main*/
private class ButtonHandler implements ActionListener{
public void actionPerformed(ActionEvent e){
for(int i=0; i<choices.length; i++){
if(e.getSource()==choices[i]){
drawingArea.setCurrentChoice(i);
break;
}//end class DrawShapes
class DrawPanel extends JPanel{
private int currentChoice=-1;
private int width=100, height=100;
public DrawPanel(int w, int h){
width=(w>=0 ? w : 100);
height=(h>=0 ? h : 100);
public void paintComponent(Graphics g){
super.paintComponent(g);
switch(currentChoice){
case 0: g.drawLine(randomX(), randomY(), randomX(), randomY());
break;
case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
break;
case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
break;
public void setCurrentChoice(int c){
currentChoice=c;
repaint();
private int randomX(){
return (int) (Math.random()*width);
private int randomY(){
return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.
-
Table1:
ou store point
LS LIB1 50
LS LIB1 200
LS LIB1 100
LS LIB1 79
I have to insert table1 to table2 by splitting into every 143point and assing serial number for every 143 from parameter.
in aboce example we can split 3 time 143 like below table2 sample.
Table2
ou store point serial_number
LS LIB1 50 101
LS LIB1 93 101
LS LIB1 107 102
LS LIB1 36 102
LS LIB1 64 103
LS LIB1 79 103
i tried below procedure its not working.
table may have any order like below.
Table1:
ou store point
LS LIB1 200
LS LIB1 50
LS LIB1 100
LS LIB1 79
then table2
ou store point serial_number
LS LIB1 143 101
LS LIB1 57 102
LS LIB1 50 102
LS LIB1 36 102
LS LIB1 64 103
LS LIB1 79 103
create or replace procedure assign_serial(from_num number,to_num number) is
bal number(10);
begin
bal := 0;
for c1 in(select * from table1)
loop
if c1.point <=143 then
if bal=0 then
bal=143-used;
insert int0 table2 values(c1.ou,c1.store,used);
elsif used > 0 then
used=used-bal;
insert int0 table2 values(c1.ou,c1.store,bal);
bal=0;
if used > 0 then
insert int0 table2 values(c1.ou,c1.store,used);
end if;
bal:=143-used;
end if;
end loop;
end;
How to split and assign serial number,please hELP..after giving serial num i have to change points in table1 to 0.The problem for SUm and split for every 143 is ,different OU and store is there.we have to know for which store points we earned serial number.
i hope this below logic little satisfy except assign cardnum,please........ check and currect the logic
LS LIB1 50
LS LIB1 200
LS LIB1 100
LS LIB1 79
--variable used and bal
for c1 in(select * from table1)
loop
used := c1.points;
if c1.point <=143 then
if bal=0 then
bal=143-used;
insert int0 table2 values(c1.ou,c1.store,used);
elsif used > 0 then
used=used-bal;
insert int0 table2 values(c1.ou,c1.store,bal);
bal=0;
if used > 0 then
insert int0 table2 values(c1.ou,c1.store,used);
end if;
bal:=143-used;
end if;
end loop; -
Help my safari doesnt open and gives me a crash report
help my safari doesn't open and gives me a crash report ever since i downloaded a file from the internet. I have a macbook air (early 2014) with running os x yosemite version 10.10.1
There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked. -
Apple Mini DVI to Video Adapter is not working. Please Help...
I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...
Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko -
Mini dvi to video adapter help pleaseeeeeeeeeeeeeeeeeeeeeeeeee
right,
ive got a 20" intel imac. i bought a mini dvi to video adapter.it said it works with the intel macs.
i maybe being a bit thick here but the end of the dvi seems to be a different size to the port on the mac.
please help....................You might find relief in the iMac Forum. Perhaps they will appreciate your distinctive thread header style more fully.
good luck.
x -
Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
LeicaHi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian -
When connecting to I-Tunes my Ipod now appears only as 'IPOD'
The Windows 'Autoplay' box appears on the left hand side of my screen.
Everything then freezes for a short while then an error message says that I-Tunes has detected an Ipod that is corrupted.
My Ipod itself is fine so I'm reluctant to restore if that will not solve the problem.
Is something to do with an automatic software update?
Please help......................
Advent Windows XPiOS: Device not recognized in iTunes for Mac OS X
Do not omit the additional information pararaph. -
i have tried:
reloading itunes
unchecking 'write'
removing lower filters in regedit
ensuring i had the correct 'gear' info in the upper filters in regedit
removing 'gear' from regedit, system32
reloading updated version of 'gear'
cleaning my registery
deleting itunes
cleaning registry again
reloading itunes
cleaning registry again
i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
the above is not the case as it also popped up for me to import cd to itunes.
i tried to copy and past the entire contents here but it would not allow me to paste.
please help!I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.
-
HELP! Can not install Oracle 8.1.5 w/ RedHat 6.1!
I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1. The
Oracle installation script generates several errors. I have
tried several attempts, using different options, but they all
generate errors.
Please help. The Oracle Installation scripts appear to be very
buggy... or perhaps they are incompatible with the standard
RedHat 6.1 release. Either way, it is very frustrating.
I have documented one of my (failed) installation attempts below.
Does anyone have any words of wisdom?
I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB RAM,
a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
2.2.12-2 kernel). RedHat was installed using the standard "Gnome
Workstation" configuration.
The Oralce CD is labeled:
"Oralce 8i Enterprise Edition
Release 8.1.5
for Linux
(c) Oracle Corporation 1999"
I got this CD about one week ago at Oracle OpenWorld '99 in Los
Angeles... it should be their "latest & greatest" version so far.
1. Pre-Installation and ./runInstall
I created an "oracle" Unix account w/ groups "oinstall" (the
primary group) and "dba" (a secondary group).
I created directories /u01 through /u04, belonging to oracle.
I setup .cshrc and sourced it, containing:
umask 022
setenv DISPLAY `hostname`:0
xhost +
setenv ORACLE_BASE /u01/app/oracle
setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
setenv ORACLE_SID cprtest
setenv PATH ${ORACLE_HOME}/bin:${PATH}
setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
setenv NLS_LANG US7ASCII
I downloaded jre116_v5 and installed to /usr/local/jre.
Finally, I executed (from the "oracle" Unix account):
cd /mnt/cdrom
./runInstall
Problem: I got the error (from ./runInstall):
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
Please wait...
Error in CreateOUIProcess(): -1
: Bad address
Workaround: Executed the following commands instead:
cd /mnt/cdrom/install/linux
./runIns.sh
3. runIns.sh and root.sh
I selected the following options (from ./runIns.sh):
Source: /mnt/cdrom/stage/products.jar
Destination: /u01/app/oracle/product/8.1.5
Oracle 8i Enterprise Edition 8.1.5.0.0
Typical (585MB)
Installable Components: Oralce Intelligent Agent 8.1.5.0.0
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Directory for Database Files: /u02
Then (when instructed by ./runIns.sh), I attempted to execute
(from the
"root" Unix account):
cd /u01/app/oracle/product/8.1.5
./root.sh
Problem: I got the error:
"bash: ./root.sh: Permission denied"
The execute bit was not set.
Workaround: I executed:
chmod a+x root.sh
./root.sh
5. Configuration Tools
The Oracle Installer (./runIns.sh) attempted to execute:
A. Net8 Configuration Agent
B. Oracle Database Configuration Agent
Problem: The "Oracle Database Configuration Agent" failed with
the following error message:
"One or more tools have failed. It is recommended but not
required that these tools succeed for this installation.
You can now select these tools, read its details to examine
why they have failed, fix those problems, and retry them.
Or, you can click "Next" to continue."
When I selected the "Oracle Database Configuration Agent" for
more info, I got the following additional details (as the cause
of the error):
"A required command line argument is missing."
The log file
"/u01/app/oracle/oraInventory/logs/installActions.log" recorded:
"Command which is being spawned is /usr/local/jre/bin/jre
-Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
-classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-3_1_10.jar:/u01/app/oracle/produc
/8.1.5/jlib/share-1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAssist.jar:/u01/a
p/oracle/product/8.1.5/assistants/jlib/jnls.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/ACC.
AR:/u01/app/oracle/product/8.1.5/jlib/help-3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u01/app/oracle/product/8.1.5/jlib/n
tcfg.jar:/usr/local/jre/lib/i18n.jar
DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos NO_VALUE
/seedloc NO_VALUE /sid cprtest /orahome
/u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
/u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
/gdbName cprtest.parkrussell.com
Invalid Exit Code. The following result code will be used for
configuration tool: 1
Configuration tool Oracle Database Configuration Assistant
failed"
Workaround: There is obviously nothing I can do to fix this
problem. It appears to be an internal bug in ./runIns.sh.
Therefore, I selected "Next" and executed "dbassist" directly.
6. dbassist
I executed:
dbassist
Problem: I got the following error:
"JNLS Execution:oracle.ntpg.jnls.JNLSException
Unable to find any National Character Sets. Please
check your Oracle installation."
Workaround: Press "OK" and ignore the error.
7. dbassist (cont.)
I selected the following options:
Create database
Typical
Copy existing database files from the CD
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Problem: I got the following error:
"CD-ROM drive not detected on this system.
Database not created."
(Note: I've been running the installation scripts from the
CDROM drive this entire time. "df" shows the CDROM drive
mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
Workaround: Abort (which generated the additional error: "Unable
to create database. DBCA-00003: No CD-ROM drive detected.") and
run dbassist again, this time using different parameters.
8. dbassist, again
I executed "dbassist" again and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and iM demos
Global Database Name: cprtest2.parkrussell.com
SID: cprtest2
Create database now
Problem: I got the following error:
"ORA-01012: not logged on"
Workaround: Try, try again.
9. dbassist, one last time
Executed "dbassist" once more and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and interMedia
demos
Global Database Name: cprtest3.parkrussell.com
SID: cprtest3
Output creation script
Then, I executed (from the "oracle" Unix account):
cd /u01/app/oracle/product/8.1.5/install
setenv ORACLE_SID cprtest3
./sqlcprtest3.sh
Problem: I got the following output:
"Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> ORACLE instance started.
ORA-01012: not logged on
SVRMGR> 2> 3> 4> 5> 6> 7>
8> 9> CREATE DATABASE "cprtest3"
ORA-01012: not logged on
SVRMGR> Disconnected."
Workaround: Beats me.
10. sqlplus
I attempted to execute sqlplus, but got the following error
message:
"/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission denied."
The execute bit was not set.
Workaround: I executed:
chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
sqlplus
I gave up for now... there were just too many things wrong with
this installation, starting with the very first command I was
supposed to execute (./runInstaller).
I can't fathom why Oracle's installation script has so many bugs.
Am I just doing something terribly wrong?
Please help.
nullI'm using enlightenment version 0.15.5-41, which is more recent
than the 0.15.5-37 version (containing the Oracle installer
patch) that you recommended. Unfortunately, it fails when using
this version.
I also tried installing Oracle using twm, with enlightenment
disabled. This didn't help either.
Furthermore, the errors that I'm encountering in the OUI are
not just toward the end of the installation. They happen from
the very beginning, right after I enter "./runInstall", and
continue every step of the way.
Calvin Mitchell (guest) wrote:
: Check out my thread: "Assistants Failure Toward end of Oracle
: Install" to see where i've gone with this.
: if your running Enlightenment as your window manager you need
to
: upgrade to 0.15.5-37, that will solve the OUI error.
: Let me know if you solve any of your problems.
: Chris Russell (guest) wrote:
: : I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1.
: The
: : Oracle installation script generates several errors. I have
: : tried several attempts, using different options, but they all
: : generate errors.
: : Please help. The Oracle Installation scripts appear to be
very
: : buggy... or perhaps they are incompatible with the standard
: : RedHat 6.1 release. Either way, it is very frustrating.
: : I have documented one of my (failed) installation attempts
: below.
: : Does anyone have any words of wisdom?
: : I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB
: RAM,
: : a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
: : 2.2.12-2 kernel). RedHat was installed using the standard
: "Gnome
: : Workstation" configuration.
: : The Oralce CD is labeled:
: : "Oralce 8i Enterprise Edition
: : Release 8.1.5
: : for Linux
: : (c) Oracle Corporation 1999"
: : I got this CD about one week ago at Oracle OpenWorld '99 in
Los
: : Angeles... it should be their "latest & greatest" version so
: far.
: : 1. Pre-Installation and ./runInstall
: : I created an "oracle" Unix account w/ groups "oinstall" (the
: : primary group) and "dba" (a secondary group).
: : I created directories /u01 through /u04, belonging to oracle.
: : I setup .cshrc and sourced it, containing:
: : umask 022
: : setenv DISPLAY `hostname`:0
: : xhost +
: : setenv ORACLE_BASE /u01/app/oracle
: : setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
: : setenv ORACLE_SID cprtest
: : setenv PATH ${ORACLE_HOME}/bin:${PATH}
: : setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
: : setenv NLS_LANG US7ASCII
: : I downloaded jre116_v5 and installed to /usr/local/jre.
: : Finally, I executed (from the "oracle" Unix account):
: : cd /mnt/cdrom
: : ./runInstall
: : Problem: I got the error (from ./runInstall):
: : Initializing Java Virtual Machine from
: /usr/local/jre/bin/jre.
: : Please wait...
: : Error in CreateOUIProcess(): -1
: : : Bad address
: : Workaround: Executed the following commands instead:
: : cd /mnt/cdrom/install/linux
: : ./runIns.sh
: : 3. runIns.sh and root.sh
: : I selected the following options (from ./runIns.sh):
: : Source: /mnt/cdrom/stage/products.jar
: : Destination: /u01/app/oracle/product/8.1.5
: : Oracle 8i Enterprise Edition 8.1.5.0.0
: : Typical (585MB)
: : Installable Components: Oralce Intelligent Agent 8.1.5.0.0
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Directory for Database Files: /u02
: : Then (when instructed by ./runIns.sh), I attempted to execute
: : (from the
: : "root" Unix account):
: : cd /u01/app/oracle/product/8.1.5
: : ./root.sh
: : Problem: I got the error:
: : "bash: ./root.sh: Permission denied"
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x root.sh
: : ./root.sh
: : 5. Configuration Tools
: : The Oracle Installer (./runIns.sh) attempted to execute:
: : A. Net8 Configuration Agent
: : B. Oracle Database Configuration Agent
: : Problem: The "Oracle Database Configuration Agent" failed
with
: : the following error message:
: : "One or more tools have failed. It is recommended but not
: : required that these tools succeed for this installation.
: : You can now select these tools, read its details to
examine
: : why they have failed, fix those problems, and retry them.
: : Or, you can click "Next" to continue."
: : When I selected the "Oracle Database Configuration Agent" for
: : more info, I got the following additional details (as the
cause
: : of the error):
: : "A required command line argument is missing."
: : The log file
: : "/u01/app/oracle/oraInventory/logs/installActions.log"
: recorded:
: : "Command which is being spawned is /usr/local/jre/bin/jre
: : -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
: : -classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-
: 3_1_10.jar:/u01/app/oracle/product/8.1.5/jlib/share-
1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAs
sist.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/jnls.jar:/
u01/app/oracle/product/8.1.5/assistants/jlib/ACC.JAR:/u01/app/ora
: cle/product/8.1.5/jlib/help-
: 3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice-
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u0
1/app/oracle/product/8.1.5/jlib/netcfg.jar:/usr/local/jre/lib/i18
: n.jar
: : DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
: : NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos
NO_VALUE
: : /seedloc NO_VALUE /sid cprtest /orahome
: : /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
: : /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
: : /gdbName cprtest.parkrussell.com
: : Invalid Exit Code. The following result code will be used
for
: : configuration tool: 1
: : Configuration tool Oracle Database Configuration Assistant
: : failed"
: : Workaround: There is obviously nothing I can do to fix this
: : problem. It appears to be an internal bug in ./runIns.sh.
: : Therefore, I selected "Next" and executed "dbassist"
directly.
: : 6. dbassist
: : I executed:
: : dbassist
: : Problem: I got the following error:
: : "JNLS Execution:oracle.ntpg.jnls.JNLSException
: : Unable to find any National Character Sets. Please
: : check your Oracle installation."
: : Workaround: Press "OK" and ignore the error.
: : 7. dbassist (cont.)
: : I selected the following options:
: : Create database
: : Typical
: : Copy existing database files from the CD
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Problem: I got the following error:
: : "CD-ROM drive not detected on this system.
: : Database not created."
: : (Note: I've been running the installation scripts from the
: : CDROM drive this entire time. "df" shows the CDROM drive
: : mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
: : Workaround: Abort (which generated the additional error:
: "Unable
: : to create database. DBCA-00003: No CD-ROM drive detected.")
: and
: : run dbassist again, this time using different parameters.
: : 8. dbassist, again
: : I executed "dbassist" again and selected the following
options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and iM demos
: : Global Database Name: cprtest2.parkrussell.com
: : SID: cprtest2
: : Create database now
: : Problem: I got the following error:
: : "ORA-01012: not logged on"
: : Workaround: Try, try again.
: : 9. dbassist, one last time
: : Executed "dbassist" once more and selected the following
: options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and interMedia
: : demos
: : Global Database Name: cprtest3.parkrussell.com
: : SID: cprtest3
: : Output creation script
: : Then, I executed (from the "oracle" Unix account):
: : cd /u01/app/oracle/product/8.1.5/install
: : setenv ORACLE_SID cprtest3
: : ./sqlcprtest3.sh
: : Problem: I got the following output:
: : "Oracle Server Manager Release 3.1.5.0.0 - Production
: : (c) Copyright 1997, Oracle Corporation. All Rights
Reserved.
: : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: : With the Partitioning and Java options
: : PL/SQL Release 8.1.5.0.0 - Production
: : SVRMGR> SVRMGR> Connected.
: : SVRMGR> ORACLE instance started.
: : ORA-01012: not logged on
: : SVRMGR> 2> 3> 4> 5> 6> 7>
: : 8> 9> CREATE DATABASE "cprtest3"
: : ORA-01012: not logged on
: : SVRMGR> Disconnected."
: : Workaround: Beats me.
: : 10. sqlplus
: : I attempted to execute sqlplus, but got the following error
: : message:
: : "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission
: denied."
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
: : sqlplus
: : I gave up for now... there were just too many things wrong
with
: : this installation, starting with the very first command I was
: : supposed to execute (./runInstaller).
: : I can't fathom why Oracle's installation script has so many
: bugs.
: : Am I just doing something terribly wrong?
: : Please help.
null -
Dear experts help needed in creation of report in hr
Please check the below code.
There is one Transaction code PA20 from these i need the fields in my report.
I tried writing the report but the fields are from structure so please help in creating the report.
I am a beginner so i donno how to find the below fields are coming from which table.
when i do F1 on the fields in PA20 i found the fields but they are from structure.
type-POOLS: SLIS.
TYPES : BEGIN OF TY_P0001,
PERNR TYPE PERNR_D, "Personnel Number
BEGDA TYPE BEGDA, "Start Date
BUKRS TYPE BUKRS, "Company Code
ENAME TYPE EMNAM, "Formatted Name of Employee or Applicant
END OF TY_P0001.
TYPES : BEGIN OF TY_P0016,
PERNR TYPE PERNR_D, "Personnel Number
PRBZT TYPE PRBZT, "Probationary Period
CTTYP TYPE CTTYP, "Contract Type
END OF TY_P0016.
TYPES: BEGIN OF TY_P9210,
PERNR TYPE PERNR_D,
ZTICKET_AMT TYPE ZTICKET_AMT, "Ticket Amount
END OF TY_P9210.
TYPES : BEGIN OF TY_OUTPUT,
PERNR TYPE PERNR_D, "Personnel Number
BEGDA TYPE BEGDA, "Start Date
BUKRS TYPE BUKRS, "Company Code
ENAME TYPE EMNAM, "Formatted Name of Employee or Applicant
PRBZT TYPE PRBZT, "Probationary Period
CTTYP TYPE CTTYP, "Contract Type
ZTICKET_AMT TYPE ZTICKET_AMT, "Ticket Amount
END OF TY_OUTPUT.
DATA: T_P0001 TYPE TY_P0001 OCCURS 1,
W_P0001 TYPE TY_P0001,
T_P0016 TYPE TY_P0016 OCCURS 1,
W_P0016 TYPE TY_P0016,
T_P9210 TYPE TY_P9210 OCCURS 1,
W_P9210 TYPE TY_P9210,
T_OUTPUT TYPE TY_OUTPUT OCCURS 1,
W_OUTPUT TYPE TY_OUTPUT.
START-OF-SELECTION.
SELECT PERNR
BEGDA
BUKRS
ENAME FROM P0001 INTO TABLE T_P0001
WHERE
AND BUKRS IN S_BUKRS
AND BEGDA < '31032007'.
SELECT PERNR
PRBZT
CTTYP
FROM P0016 INTO TABLE T_P0016
FOR ALL ENTRIES IN T_P0001
WHERE PERNR = T_P0001-PERNR
SELECT PERNR
ZTICKET_AMT
FROM P920 INTO TABLE T_P920
FOR ALL ENTRIES IN T_P920
WHERE PERNR = T_P0001-PERNR.use logical data base PNP.
tables: pernr.
infotypes: 0001, 0016, ....
start-of-selection.
get pernr.
here all tables Pxxxx defined as INFOTYPES are filled for the selected PERNR. -
I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!
Did you fix your issue? I am having the same one
Maybe you are looking for
-
HP dv9000z...general musings & errors
Laptop comes (stock) with nforce 430 chipset and GeForce Go 6150 integrated video. As of Kernel26-2.6.18-7: Will not boot (arch64) without out first turning off acpi. (hangs randomly and or no visual output after boot) Will not boot 7.2 in
-
After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?
-
Problem in adding a field in infospoke table
Hello, I have an infospoke ZSOCOMMN in BW 3.5 whose datasource is infocube ZSD_C61 and the db table generated is /BIC/OHZSOCOMMN . The requirement is to add a field ZEND_UAM( End User Account Manager ) in the above infospoke table. This field ZEND_UA
-
How to detect object being touched or not in kinect
Dear all, i am new bie to kinect programming. i want to build application where camera can detect object touched or not.consider 3 object are placed on table like in set book ; remote & MOUSE . whenever object being picked i wanted to increment paric
-
I had to reinstall contacts and calendar on my pc. when i set the program up on icloud it told me there were 40 contaccts that could not be uploaded. how do i is\dentify them in outlook and get them loaded to icloud?