Help on printing error messages to a log file

Hi, may I know whether is there any way to print the error messages to a log file? Thanks for your help!

noobboy,
Please refrain from crossposting all of your questions into multiple forums. You were asked to stop this the last time you did this as well. Please be more considerate in future.

Similar Messages

Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabit

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

Error message in the log file

Hi,
I'm running CF 7.0.2. The app is using Flash forms.
I have this onError function in my Application.cfc.
<cffunction name="onError">
<cfargument name="Except" required="yes">
<cfargument name="EventName" type="string"
required="yes">
<cflog file="#This.Name#" type="error" text="Event Name:
#EventName#" time="yes">
<cflog file="#This.Name#" type="error" text="Messsage:
#except.message#" time="yes">
<cflocation url="errorPage.cfm" addtoken="no">
<cfabort>
</cffunction>
The app is working fine but my log file is full of errors:
Event Name: onRequestStart
Messsage: Event Handler Exception
Any idea what's wrong?
Is there any way to get more specific error message?
Thanks,
b.

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Seeing ORABPEL-12164 error message in domain.log file.

Hi,
Can someone help me in debugging the ORABPEL-12164 error seen in domain.log
<2007-06-15 11:40:36,521> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Using JCA Connection Pool - max size = <unbounded>
<2007-06-15 11:40:36,521> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_INVOICE_1.0.jar/publishStatusToOracleBAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Using JCA Connection Pool - max size = <unbounded>
<2007-06-15 11:40:36,568> <ERROR> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Could not invoke operation 'Produce_Message' against the 'JMSAdapter' due to:
ORABPEL-12164
ERRJMS_MSGPROD_CONSTR_ERR.
Unable to construct MessageProducer.
Please examine the log file to determine the problem.
<2007-06-15 11:40:36,568> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> Change logging level for Logger 'NTAPDEV.collaxa.cube.ws' to DEBUG to see full error stack
<2007-06-15 11:40:36,568> <ERROR> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Rolling back JCA LocalTransaction
Thanks, G

I recently took over this system, I believe all the configuration you mentioned should have been done.
Any pointers in verifying is highly appreciated.
Thanks, G

**ERROR: Messages in webi log files

Hi,
My log files seem to be littered with messages like:
***ERROR:C3_cdbDSLServer:(A) cdbDSLServer_LoadUniverseMetadata : CreateChildItem (false)....
or
**ERROR:C3_Dictionary:cdbDictionaryFolder::RegisterFolder failed for: "WE Calendar"....
or
**ERROR:C3_tbDimensionalSLDS:BOException: ...
or
**ERROR:IECore_kc3CoreEngineImpl:GetUniverseLOV failed.
etc.
These show up in the Webi server logs. We don't see these on the screen and I am having a hard time tracking any information about them down. Is it a *real* error? Should I be concerned??
thanks,
-missy

SAP Support said not to worry about the messages marked as ***ERROR as they 'soft errors'.
For the example of :
ERROR:C3_cdbDSLServer:(A) cdbDSLServer_LoadUniverseMetadata : CreateChildItem (false)...
This message was due to a report loading the objects and taking longer than the system is designed to wait, so it logs a message and continues on to completion. I paraphrased that a bit, but that was the primary description.
In contrast, if it was a hard error, the report would fail and a message of some sort would be displayed on screen.
If reports start failing or messages are displayed on screen, then I should be concerned and should open a new ticket.
So pretty much what you said Prabhith.
I can't say I get a warm and fuzzy feeling about this response, but nothing is failing on our end, so at the same time I am not going to push the issue. His response was prompt and he had seen it before, so I am less worreid, but I will still continue to keep an eye on it as usual.
thanks,
missy

HELP - illustrator cs5 error message when opening cs3 files

Has anyone else had this issue? Do you know how to fix it.
I just bought and downloaded cs5. When opening Illustrator cs3 files I get an error message: "Can't finish previewing. Could not complete the requested operation."
Then it opens the file but I it is only line work (no fills, gradients, etc) and I can not do anything in the file. If I click an object the error message pops up again.
This is what it looks like in cs3.
This is how it displays in cs5
I cant find anything online about this issue. Also this occurs on all of my illustrator files, not just one.
any advice?
thanks

davidmacy wrote:
I think your current system should be fine for running Illustrator CS5. Please let us know if the original problem happens for you again.
I think your system is also fine for running Adobe Illustrator CS 5 but of course you are running the system as well and a browser and e-mail client…and perhaps Adobe Photoshop or Adobe InDesign or Microsoft Word in which case I think there might be on occasion an out of memory issue and with a complex file you will lose your preview.
I have lost my preview as well on certain files and found that it usually is because I had trashed the preferences and forgot to set the scratch to a different disk other than the startup disk.
I have 16 GB of RAm and once in a while I still lose the preview.

How to Write Error messages to application.log file in OAS 10g.

Hi All i am in urgent need of writing log messages to Oracle Application Server10g application.log file.
Using JDeveloper 10.1.3.4.0.4270.
Thanks & Regards,
Renuka
Edited by: Renuka on Jan 18, 2013 8:00 AM

Zariel wrote:Boot from where? If you want the entire boot process you can use debug parameter. BUT I dont know what you will get becauseyour harddrive gets mounted during init, and during init it dumps dmesg to a log file, i guess dmesg gets its logs from minilogd which also gets started during init. The only way of doing it would be to get the kernel to log its output to ram then flush it to disk at the relevant time. Ive no idea if you can do this or not.
I just boot normally from my hard disk, but all the messages between "INIT version 2.86 booting" and the output from /etc/issue (when login is started), is gone. It's not in /var/log/messages nor do I get it via dmsg.
All the kernel messages BEFORE "INIT version 2.86 booting" are logged okay.

Error message in alert_SID.log & PMON.trc

OS: Redhat6.2
DB: Oracle Enterprise 8.1.5
getting the error message in alert_SID.log
PMON started with pid=2
OER 536879337 in Load Indicator : Error Code = 562604272 !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
as well as continual following error messages in both alert_PID and PMON.trc
Load Indicator not supported by OS !
Tue Jun 13 00:12:39 2000
Load Indicator not supported by OS !
Tue Jun 13 00:13:12 2000
Load Indicator not supported by OS !
Tue Jun 13 00:13:46 2000
I understood that this has to do with the mts_dispatchers param in the init file, but I need to run it as a shared server rather than a delicated server.
Can anyone help?
null

Hi,
As far as I am aware you should be able
to obtain a patch for bug 987647 from oracle.
to Stop the PMON error from appearing.
However they apparently do not see the recurring Load Indicator Message as a bug. It is simply reporting facts. The work around here is to user cron to automatically delete these messages from your log as they are harmless unless they fill your file system.
Cheers,
Rod
null

ICal doesn't show delegation, and generates date and time error messages in /var/log/system.log

I have a problem with my iCal, when I use my caldav account, I can only see my own calendar on my MBA, on my co-workers MBP it works fine with both my account and his. My co-worker can't see other calendars than his own when he uses iCal on my laptop.
We can reproduce this problem on his computer by setting Location to Automatic rather than Amsterdam, then after deleting iCal's cache files, the caldav account and setting the Location back to Amsterdam solves the problem for him.
It does not solve the problem for me (or several other co-workers). We've been looking at this for a few weeks, and we can not find any clear pattern why certain machines have this problem and others don't.
All machines (both affected and unaffected) are running Mac OS 10.7.2 with iCal 5.0.1
I've spoken to Apple support over the phone (in the Netherlands), unfortunately, they couldn't help with this.
So far we've tried numerous location and language settings, but on affected machines nothing appears to solve the delegation problem (which we assume to be connected to the error messages iCal generates)
Starting iCal yeilds the following error messages in /var/log/system.log:
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
          line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
          line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
Jan 5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
              "interval: 2001-01-01 01:00:00 +0100, offset: 3600"
          ) != (
              "interval: 2010-03-28 03:00:00 +0200, offset: 7200",
              "interval: 2010-10-31 02:00:00 +0100, offset: 3600",
              "interval: 2011-03-27 03:00:00 +0200, offset: 7200",
              "interval: 2011-10-30 02:00:00 +0100, offset: 3600"
          BEGIN:VTIMEZONE
          X-LIC-LOCATION:Europe/Amsterdam
          TZID:Europe/Amsterdam
          BEGIN:DAYLIGHT
          TZOFFSETFROM:+0100
          TZNAME:CEST
          TZOFFSETTO:+0200
          DTSTART:19700329T020000
          END:DAYLIGHT
          BEGIN:STANDARD
          TZOFFSETFROM:+0200
          TZNAME:CET
          TZOFFSETTO:+0100
          DTSTART:19701025T030000
          END:STANDARD
          END:VTIMEZONE
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
          line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
          line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
Jan 5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
              "interval: 2001-01-01 01:00:00 +0100, offset: 3600"
          ) != (
              "interval: 2010-03-28 03:00:00 +0200, offset: 7200",
              "interval: 2010-10-31 02:00:00 +0100, offset: 3600",
              "interval: 2011-03-27 03:00:00 +0200, offset: 7200",
    "interval: 2011-10-30 02:00:00 +0100, offset: 3600"
          BEGIN:VTIMEZONE
          X-LIC-LOCATION:Europe/Amsterdam
          TZID:Europe/Amsterdam
          BEGIN:DAYLIGHT
          TZOFFSETFROM:+0100
          TZNAME:CEST
          TZOFFSETTO:+0200
          DTSTART:19700329T020000
          END:DAYLIGHT
          BEGIN:STANDARD
          TZOFFSETFROM:+0200
          TZNAME:CET
          TZOFFSETTO:+0100
          DTSTART:19701025T030000
          END:STANDARD
          END:VTIMEZONE
And when I close iCal I get:
Jan 5 11:33:25 dhcp-91 [0x0-0x592592].com.apple.iCal[23894]: token mismatch: 4 != 5

I'm seeing the same thing, and I can't even find where OS X stores calendars on disk anymore...

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

ERROR messages in /var/log/messages

Hi,
I encountered a error messages in /var/log/messages please find below
Dec 9 04:03:08 drs syslogd 1.4.1: restart (remote reception).
Dec 9 04:03:18 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:03:18 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:03:18 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:03:18 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:03:18 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:03:18 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:03:18 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:03:18 drs init: Id "h1" respawning too fast: disabled for 5 minutes
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs init: Id "h1" respawning too fast: disabled for 5 minutes
Dec 9 04:10:46 drs rpc.mountd: authenticated unmount request from 10.3.141.26:651 for /opt/backup_log/srv (/opt/backup_log)
Dec 9 04:10:47 drs rpc.mountd: authenticated mount request from 10.3.141.26:657 for /opt/backup_log/websrv (/opt/backup_log)
Dec 9 04:10:47 drs rpc.mountd: authenticated unmount request from 10.3.141.26:672 for /opt/backup_log/websrv (/opt/backup_log)
Dec 9 04:10:47 drs rpc.mountd: authenticated mount request from 10.3.141.26:677 for /opt/backup_log/ws (/opt/backup_log)
Dec 9 04:12:01 drs rpc.mountd: authenticated unmount request from 10.3.141.26:849 for /opt/backup_log/ws (/opt/backup_log)
Dec 9 04:13:20 drs logger: Oracle Cluster Ready Services disabled by corrupt install
and database (oracle 10g) is running fine, but i cant figure out what could be the problem, can anyone just help me out on this.
Jafar

Hi,
#h1:35:respawn:/etc/init.d/init.cssd run >/dev/null 2>&1 </dev/null
by commenting above line in initttab file would stop messaging, is this would have any adverse affect on the database. As its a production server, so i am really taking time to resolve it. Your suggestions are welcome. If there is no harm in commenting the above line then i would go forward to comment that line.
Thanks
Jafar>

Printer error messages

psc 2170 all in one printer, error message "remove and check cartridge" this has appeared for no obvious reason when I now switch on. I have removed and cleaned contact points on both cartridges and printed to no avail so would be most grateful for any suggestions that might help.
Thank you
This question was solved.
View Solution.

Hi - Did you clean the contacts in the printer (carriage) as well? If not, try that to see if that resolves the problem - Step 5 in this document.
If that doesn't resolve the problem, the next step is to replace the cartridges (one at a time, in case only one of them is bad).
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

[svn:bz-trunk] 8910: Bug: LCDS-936 - Should have better error message in servlet log if server in services-config .xml is configured to use wrong class.

Revision: 8910
Author:   [email protected]
Date:     2009-07-29 14:22:26 -0700 (Wed, 29 Jul 2009)
Log Message:
Bug: LCDS-936 - Should have better error message in servlet log if server in services-config.xml is configured to use wrong class.
QA: Yes
Doc: No
Checkintests: Pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-936
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

After many hard working days.i finally found the error cause,i needed to make weblogic datasource also ADF doesnt work on internet explorer browser,it works on safary.hope it helps somebody

Printer error message

Printer error message
Printer hp LaserJet CP1525nw
Windows 7
The following message is displayed when sending any file to the above printer.
"hpmns115.dll has stopped working"

Hi jwnova142 ,
Welcome to the HP Forums.
I see that you are having an issue with a Paper Size Error when attempting to print.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with the 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Envy 5534 on MAC- print error message unable to convert post scrip file

New printer set up fine prints letter but when I want it to print a page with bar code on get error message :-
print error message unable to convert post scrip file
Can any one help please
This question was solved.
View Solution.

Hi @itsalex,
What type of bar code are you printing, and from what program? Just a thought, what if you print the barcode as an image, if you are not already? Try File>Print> Advanced> Print as Image> print.
If the issue persists, let's reset the printing system and repair the disk permissions; doing so may resolve the issue.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer drive. In the screenshot below, you will see Airprint is auto selected, you can change it to the HP driver though.
I look forward to hearing back from you.
Talk to you later alligator
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Help on printing error messages to a log file

Similar Messages

Maybe you are looking for