HELP on SAP NW2004s SR1 on Fedora Core 7 using MAXDB

hello all. could anyone help on the error i encountered during installation phase 2(installing common system files)
ERROR 2008-04-09 10:45:45
MUT-03010 Execution of the command "/bin/csh -c "source /home/p06adm/.cshrc; env"" finished with status TST_ERROR.
ERROR 2008-04-09 10:45:45
MUT-03010 Execution of the command "/bin/csh -c "source /home/p06adm/.cshrc; env"" finished with status TST_ERROR.
ERROR 2008-04-09 10:45:45
FCO-00011 The step createSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createSystemDirectories was executed with status ERROR .
Is it a problem with environment variables?

Dear Tony,
to quote my former post in your other question thread, Fedora 7 is not a supported platform for SAP. Nevertheless, if you plan to play around with the system instead of using it productively, you may continue. But never forget, that you are running on a non supported combination.
There are two possibilities for fix the problem you are facing:
You can download all updated the installation files on the SAP Service Market Place at http:
service.sap.com\swdc
Please check SAP Note [929929|https://service.sap.com/sap/support/notes/929929], which describes common sapinst problem.
Thanks,
Hannes

Similar Messages

Install and Configure Oracle client in Fedora core 3

Hi guys
I am raghu ,
I need a help regarding Oracle client installation in Fedora core 3
can any one guide where to get oracle client and installation steps
Thanks
Raghu

Hello.
You could use paper for installation of 9i or 10g database because client is one of options of installer.
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
http://ivan.kartik.sk/oracle/install_ora10gR2_fedora.html
http://www.oracle.com/technology/tech/linux/install/index.html
You could also install only instant client (so you don't need download all 3 CDs of Oracle database) and set appropriate enviroment.
You could obtain it from:
http://www.oracle.com/technology/tech/oci/instantclient/instantclient.html

Error while Installing SAP NetWeaver Testdrive sr1 in Fedora 7

I am getting problen while Installing SAP NetWeaver Testdrive sr1 in Fedora 7
I need to install SAP Web Application Server 6.4 ,SAP NetWeaver Developer Studio,MAXDB7.5 in Fedora Core
The package sapj2ee-srv-sapdb-6.40-2 is already installed.
The package sapdb-7.5-2 is already installed.
The package sapdb-db-log-7.5-2 is already installed.
The package sapdb-db-files-7.5-2 is already installed.
Found interface: eth8 . Alias is eth8:0
ifconfig eth8:0 195.155.155.1 up
LD_LIBRARY_PATH: Undefined variable.
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/sapdb/programs/bin/xuser: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
[: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Can u suggest what I need to do ? do I have to install any rpm

Hi Debashis Mallick,
it seems the program xuser need the libraries libdl.so.2 and libc.so.6 and don't find it.
Both are in package glibc-2.6.x. ,maybe your have Version < 2.6 installed?
Regards
Andreas Filzer

Is it possible to install SAP PI7.0 on LINUX -FEDORA CORE 8 OS?

Hi all,
I have LINUX - Fedora core 8 OS, is it possible to install SAP PI 7.0 on this flavor of linux.
If any one has already done the same, please guide me with the hardware and software requirements like (DB, JDK, etc).
Any help would be appreciated and rewarded.
Thanks,
Younus

Hi,
Sure. you can able to install PI7.0 with Linux.
The complete documentations are available in Service Market Place.
Check this URL:
https://websmp210.sap-ag.de/
Thanks,
Boopathi

Plz help me setting path on fedora core 8

hiii guyz,
plz help me...i have to set java path on fedora core 8 how i have set the path..
if anyone know plz say

Here is how you do it:
http://www.google.com/search?q=set+java+path+fedora

Help Required for Oracle 9i Installation on Fedora Core 3

I am new to Linux on Oracle and wanted to set up oracle on Fedora Core 3.
I have downloaded Oracle9i Database Release 2 Enterprise/Standard Edition
for Intel Linux from http://www.oracle.com/technology/software/products/oracle9i/htdocs/linuxsoft.html
I have downloaded it on Windows XP Can any one please suggest me what should be the next steps to install it on Fedora Core 3?
Thanks in advance

So copy downloaded installation from Windows to Linux machine using SCP.
You can download GUI SCP client here: http://winscp.net/eng/index.php
If you preffer command line tool then you can use PSCP tool: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Then use some installation steps for Fedora for example you can use mine (follow exactly all steps):
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
Just little advice don't use root to login to Linux computer, use oracle instead (once it is created).

Java Server Startup error during sapinst NW2004s SR1

Hi Folks,
Anyone experimented this error during while installing NW2004s SR1 on HPUX, java version 1.4.2.12, Oracle 10.2.0.2 ??
Sapinst hangs at Java Startup Step for hours, Dispatcher comes up OK, but the
java Server doesn't.
Thanks for your help.
Here is the std_server0.out file :
stdout/stderr redirect
node name : server0
pid : 11322
system name : EZ3
system nr. : 43
started at : Tue Feb 20 09:37:31 2007
[Thr 1] Tue Feb 20 09:37:33 2007
[Thr 1] MtxInit: -2 0 0
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Error occurred while preloading classes of security providers from jre/lib/ext folder: jav
a.util.zip.ZipException: error in opening zip file
Loading: LogManager ... 3880 ms.
Loading: PoolManager ... 8 ms.
Loading: ApplicationThreadManager ... 536 ms.
Loading: ThreadManager ... 73 ms.
Loading: IpVerificationManager ... 167 ms.
Loading: ClassLoaderManager ... 194 ms.
Loading: ClusterManager ... 2312 ms.
Loading: LockingManager ... 498 ms.
Loading: ConfigurationManager ... 0.000: [GC 0.001: [ParNew: 87040K->3443K(130560K), 0.098
2672 secs] 87040K->3443K(1005056K), 0.0986039 secs]
1.808: [GC 1.808: [ParNew: 90483K->3099K(130560K), 0.0415189 secs] 90483K->3099K(1005056K)
, 0.0418049 secs]
25675 ms.
Loading: LicensingManager ... 214 ms.
Loading: CacheManager ... 2824 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (69 ms).
Service cross started. (48 ms).
Service file started. (91 ms).
Service runtimeinfo started. (36 ms).
Service timeout started. (123 ms).
Service p4 started. (867 ms).
Service classpath_resolver started. (76 ms).
Service log_configurator started. (6296 ms).
Service locking started. (16 ms).
32.249: [GC 32.250: [ParNew: 90139K->13016K(130560K), 0.2134920 secs] 90139K->13016K(10050
56K), 0.2138817 secs]
Service naming started. (1396 ms).
service javamail ================= ERROR =================
service ts ================= ERROR =================
Cannot start service iiop; it has hard reference to service ts which is not started.
Cannot start service licensing; it has hard reference to service ts which is not started
Timed out services:
Service shell > hard reference to interface security.
Service bimmrdeployer > hard reference to interface container.
Service MigrationService > hard reference to interface container.
ServiceManager started for 307650 ms.
Framework started for 344321 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel June 17, 2006 13:05 GMT

Hello David,
Thank you for the hint about IIOP service.
This services starts properly since I fixed the javamail.jar and the transactionext_api.jar files (Services javamail + ts)
Now my concerns are about the timeouts caused by the "interface security" and the
"interface container".
Here is the latest std_server0.out file:
stdout/stderr redirect
node name : server0
pid : 13880
system name : EZ3
system nr. : 43
started at : Thu Mar 1 08:42:09 2007
[Thr 1] MtxInit: -2 0 0
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: error in opening zip file
Loading: LogManager ... 2783 ms.
Loading: PoolManager ... 15 ms.
Loading: ApplicationThreadManager ... 830 ms.
Loading: ThreadManager ... 113 ms.
Loading: IpVerificationManager ... 61 ms.
Loading: ClassLoaderManager ... 67 ms.
Loading: ClusterManager ... 2390 ms.
Loading: LockingManager ... 2547 ms.
Loading: ConfigurationManager ... 0.000: [GC 0.001: [ParNew: 87040K->3248K(130560K), 0.1227555 secs] 87040K->3248K(1005056K), 0.1231219 secs]
1.247: [GC 1.248: [ParNew: 90288K->3105K(130560K), 0.0611352 secs] 90288K->3105K(1005056K), 0.0614666 secs]
23050 ms.
Loading: LicensingManager ... 191 ms.
Loading: CacheManager ... 1932 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (113 ms).
Service memory started. (211 ms).
Service cross started. (241 ms).
Service timeout started. (254 ms).
Service file started. (538 ms).
Service p4 started. (652 ms).
Service classpath_resolver started. (81 ms).
Service log_configurator started. (12581 ms).
Service locking started. (13 ms).
44.117: [GC 44.117: [ParNew: 90145K->13112K(130560K), 0.6812383 secs] 90145K->13112K(1005056K), 0.6816423 secs]
Service naming started. (3984 ms).
Service javamail started. (333 ms).
Service ts started. (375 ms).
Service licensing started. (26 ms).
Service iiop started. (535 ms).
Timed out services:
Service shell > hard reference to interface security.
Service bimmrdeployer > hard reference to interface container.
Service MigrationService > hard reference to interface container.
ServiceManager started for 311713 ms.
Framework started for 346641 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel June 17, 2006 13:05 GMT

PDK Content on NW2004S SR1 missing

In our nw2004s-SR1 productive installation of EP,
we are missing the menu-point "Java Developer".
We know, that these menu-point comes with the PDK-Content
SCA-Archive, which can be downloaded from SDN.
Our goal is, to install the Productive-EP similar
to our SneakPreview-EP.
We tried already to install the PDK-SCA Archive via
SDM, but it fails.
I can't believe, that the PDK-Content SCA-Archive from
SDN is the right PDK-Content for a productive environment.
Will be nice, if anybody can help us.
Regards, Alex.

Hello Marc,
I ran into the same issue. After a lot of trial and error I eventuelly found out, was the problem was...
I had to do two things to resolve this:
1. Download the XML file containing the SP stack definition:
-You'll find the instructions for downloading this file on the Support Package Stacks Download Page for NW2004s in the box 'Additional information'.
-Put the XML file in the JSPM inbox (Folder '/usr/sap/trans/EPS/in' on a standard installation).
2. Update the SDM:
-Download the file with the description 'SP07 for SAP SOFTW. DELIV. MANAGER 7.00' from the Support Package Stacks Download Page
-SAP Note 860939 explains how to update the SDM
Hope this helps...
Regards,
Bjoern

Reinstallation of oracle 10g on Fedora Core 2

Dear Oracle community,
I tried to install Oracle database 10g software (Enterprise-edition) on
my PC (Fedora Core 2) in two steps. At first the software only
(as described in
http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora2.php)
and then (using dcba) the example data base "sales".
The first step was succesfully. The second step has led to a "freeze" of
my computer. Input became impossible - so after running about 30 minutes
(100% CPU usage) I stopped my computer switching the power off.
Now I deleted the whole installation of Oracle manually as far as
possible (as far as I know/found the changes). Afterwards I tried to
reinstall the software. This was now impossible - the same "freezing"
effect happened now already in the first step. What are the reasons
for that? Can you help me to solve the problem?
I fear that some configuration files might be now corrupted and I have to
reinstall Fedora2 to be sure that nothing else is damaged.
Up to now I was only a user of a Oracle data base - it is the first time
that I try to install Oracle.
I have read the forum stuff about installation of 10g on Fedora Core 2
but do not find remarks for my problem.
Here are further details which could be important:
My PC has 2 processors and 2GB RAM and 2GB swap space.
The PC is located in a small Intranet and gets its IP-address by DHCP.
LINUX is installed (Fedora 2, kernel 2.6.5-1.358smp), as well as
a Web-server (httpd-2.0.51-2.7.rpm),
Java (j2sdk-1.4.2_05-fcs.rpm) and
tomcat (jakarta-tomcat-4.1.30-LE-jdk14.tar.gz)
(perhaps there is some disturbing interaction between installed
Java-version and the Java-Version supplied by the Oracle software?)
I followed the instructions in the installation description given in the
above mentioned web site but with some minor changes:
- /etc/hosts:
127.0.0.1 obox local_host.local_domain
192.168.2.3 oracle.home obox
- instead to create a directory in which the Oracle software will be
installed:
mkdir -p /u01/app/oracle/product/10.1.0/db_1
chown -R oracle.oinstall /u01
I created the following:
mkdir -p /opt/oracle/10.10
chown -R oracle.oinstall /opt/oracle
- The .bash_profile of the oracle user I modified a little bit:
# Oracle Settings
TMP=/oracle/tmp
ORACLE_BASE=/oracle/oradata #
ORACLE_HOME=/opt/oracle/10.1.0
ORACLE_SID=Test1
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
# after installation I've seen that I forgot a colon between /lib and
# /usr/lib in LD_LIBRARY_PATH - perhaps this is a reason for hanging
# of the computer installing the example database "sales"?
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
# after software installation I did not found $ORACLE_HOME/JRE but
# $ORACLE_HOME/jre - and I changed the CLASSPATH
- the following part I transfered to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
- In a first step I installed only the Oracle Software without any
problems (but with the error in the definition of LD_LIBRARY_PATH and
CLASSPATH respectively)
- I performed the post installation steps except that I did not change
the content of /etc/oratab because I did not want to start Oracle
automatically starting the computer
- Then I started the dbca to create the data base "sales". I could enter
all wanted parameters (I named the data base "test1" to be conform
with ORACLE_SID . Then dcba started the creation of the data base
but did not end (hanging)
- I looked for possible errors, corrected the definition of CLASSPATH
and LD_LIBRARY_PATH respectively and wanted to reinstall Oracle
- I applied the following commands to delete all (???) data files
created in the installation process
rm /etc/oratab
rm /etc/oraInst.loc
rm -R /etc/oracle
rm /usr/local/bin/oraenv
rm /usr/local/bin/coraenv
rm /usr/local/bin/dbhome
rm -R /opt/oracle/10.1.0/*
rm -R /opt/oracle/oraInventory
rm -R /oracle/tmp/*
rm -R /oracle/oradata/*
- now (after restart of the PC) I wanted to install the Oracle software
anew. After specifying ORACLE_HOME and running a script as root the
OUI started to load and unzip files from the installation directory
Disk1 and runs in an endless loop (about 66% of the work was done).
- After restart of my PC I made a second trial and already after the
input of the first parameter the OUI runs in an endless loop
- the endless loop: 2 java instances were running using 100% CPU
and input by keyboard was not accepted.
Many thanks in advance
Klaus!

Hi Klaus,
Have you had any luck in resolving this problem. It sounds like the exact same problem I am having

Error in phase 42 during installation of NW2004s SR1

I am getting this 2 errors in 42nd phase of installation of NW2004s SR1 in my system. Pl. suggest the solution for this.
ERROR 2007-12-13 12:42:10
CJS-30071 Execution of UTL tool 'C:\Sap_Basis\j2sdk1.4.2_13\bin\java.exe -classpath C:\usr\sap\AB8\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/iaik_jce.jar;
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/iaik_jsse.jar;
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/iaik_smime.jar;
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/iaik_ssl.jar;
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/SDMutil.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/SLUtil.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar -activated -prod_name=NetWeaver -usage_name=AAS -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=AB8 -dsn=jdbc/pool/AB8 -ssprops=C:/usr/sap/AB8/SYS/global/security/data/SecStore.properties -ssk=C:/usr/sap/AB8/SYS/global/security/data/SecStore.key' aborts due to database connection error with return code 64. DIAGNOSIS: The connection parameters are wrong or the database server is shutdown. SOLUTION: Check 'UTL_activate_usages.log' and 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS/UTL.java.log' for more information.
ERROR 2007-12-13 12:42:10
FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|enableUsageTypes was executed with status ERROR .

HI Abinash,
log says that database is shutdown.
log on user as SIDadm go commannd promt
type sqlplus " / as sysdba "
i will promt SQL> type here startup; enter u r database is startted
Then installed from that stage.
i will be work.
Amol

Fedora core 6 sun app server won't start

Sun app server 8.2 bundled with creator 2u1 doesn't start. This install was running fine under fc5. Among other things I get the following with pe-start -reset which I think might be the crust of the problem:
"Unable to read system environment. No system environment will be used."
Any help appreciated.

Exported projects to nb5.5 with visual-web pack and after fixing datasources and libraries things are working again. Could not find a solution for Creator2 on Fedora Core 6. Thanks anyway.

Installation notes: JES 2005Q4 on Fedora Core 4

Hi,
Getting JES (with Portal Server 6) to work on a Linux platform (that's unsupported by SUN) can be a nightmare. Here's what to do with Fedora Core 4:
1. You need to install compat-libstdc++-296.i386 rpm package. This provides /usr/lib/libstdc++-libc6.2-2.so.3 that the application server needs.
If you don't have that package installed, install with yum:
yum install compat-libstdc++-296.i386
Note: I used...
yum provides libstdc++-libc6.2-2.so.3
... to find out the package.
Actually I installed compat-libstdc++-33.i386 as well, but I'm not sure did that affect anything.
2. Install pdksh
There are many ksh clones available. Fedora Core 4 ships with some version of ksh that lacks features used by PS6 install scripts. You have to get pdksh from http://www.math.mun.ca/~michael/pdksh/
Configure and install it according to the instructions. Then get rid of the ksh that came with FC4 and make sure /bin/ksh points to /usr/local/bin/ksh (if you installed pdksh to the default location).
3. Run the JES installer and everything should work out fine. The installation process meter still seems to hang when installing portal server but actually it is working hard for several minutes. You can verify that by using top.
More details on the problems that occur if you don't follow these steps (should help for other distros than FC4):
The installation process hangs when it gets to install portal server (verify with top that it isn't actually doing anything). This is because you don't have the right ksh. Using ps -aef you'll see that there are processes running ksh.
The actual problem is that the PS6 installation script is defining variables with the keyword 'local' that's not supported with ksh shipped with FC4. If you try to run the portal configuration script manually you get lines like:
opt/sun/portal/lib/postinstall_Base[21]: local : not found [ no such file or directory]
opt/sun/portal/lib/postinstall_Base[22]: local : not found [ no such file or directory]
opt/sun/portal/lib/postinstall_Base[23]: local : not found [ no such file or directory]
The JES installation program will not recover from this. So get pdksh!
If you don't have libstdc++-libc6.2-2.so.3 the installation seems to work fine, but it will fail on deploying anything on the appserver (it won't be able to start the domain). This was the really ridiculous thing about the installer because it reported no errors even though it was failing to install anything on the appserver!
Hope this helps someone. Took me nearly two days to figure out.

Instead of downloading the source code for Korn Shell and going thru the manual compilation and configuration go to http://rpm.pbone.net and perform an advanced search for ksh for Red Hat 9.
You will find : pdksh-5.2.14-21.i386.rpm
Here's the url for a mirror site:
ftp://mirror.switch.ch/mirror/fedoralegacy/redhat/9/os/i386/pdksh-5.2.14-21.i386.rpm
Download the rpm.
Remove the existing pdksh by :# rpm -e pdksh
Install the ksh of choice: rpm -ivh pdksh-5.2.14-21.i386.rpm
I was able to install JES 2005 Q4 on Fedora core 5.
Good Luck

CFMX702 On Fedora Core 6

Hi there, it's been a while since my last post here, but
there is allways a chance to post once again (like this time).
I've been trying to install Coldfusion MX 7 on Fedora Core 6,
let me tell that it's a pain make it work but when at last you can
see the administrator page it's like been in heaven. I had followed
this
tutorial to make it work (followed STEP by STEP), i also
configured a virtual host in Apache 2.2, placed some simple cfm
page and works fine, but when i add an application.cfc it seems
that it is not been processed.
Application variables are set to "On" as well as Server
Variables. I know that the CFIDE folder must be accesible for some
stuff to work, so is there any way to make CFIDE folder avaliable
for a virtual host created on the httpd.conf?
Comparing the creation of a coldfusion enabled web site
against IIS 5 or 6, i remmeber that i had to run some utility that
do all the setup process (java application called "Web Server
Configuration Tool"), but no clue on how to configure a virtual
host on apache that works fine with Coldfusion.
Ne help for this problem?

When running the ./wsconfig (avaliable at
/opt/coldfusionmx7/runtime/bin/) i got the same java application
running as windows, but when i try to create a new web server
configuration (like in windows 2000 with IIS) it says that the
server is configured for jrun.
The hosted folder i need coldfusion to work is located at
/www/hosting/test1 folder.

Application Server & creator can work in fedora core 5 ?

please i need help

Just so you know, I had similar problems running on Fedora Core 4 as well as Fedora Core 5. I re-installed numerous times, did clean installs of the whole system a few times, and finally came down with what the problem was and the set of items to handle this. I posted this a few months ago on this forum -- hope it helps.
I have 5 workstations and several development & production servers all running FC4 and FC5 and they're all humming along like a charm using SJSAS 8.1 enterprise on the servers and 8.2PE on the workstations.
http://forum.sun.com/jive/thread.jspa?threadID=63058&messageID=235733#235733
Let me know if that helps.
--tad

NW04s Linux Trial : problem installing IBM JDK Fedora Core 6

Hi,
I'm trying to install the NW04S Linux Preview on a Fedora Core 6 distribution and I'm encountering a problem with the IBM JDK 1.4.2 installation.
I've downloaded the RPM package from IBM (IBMJava2-AMD64-142-SDK-1.4.2-7.0.x86_64.rpm
), installed it as root but when I try to invoke the virtual machine (java) or the compiler (javac), I got the following error :
libjvm.so preloadLibrary: /libj9vm22.so: cannot open shared object file: No such file or directory
libjvm.so failed to load: j9vm22
Has anyone tried to install the Linux Preview on Fedora and encountered the same problem. It might be connected to some sort of the linux dynamic linker/loader (ld.so) or versions of librairies.
I'm really lost here and I won't be able to start the installation without a working virtual machine.
Thanks

I have double checked the link provided to the IBM JDK in the Linux Trial and it seems I had the wrong version. I've downloaded IBMJava2-AMD64-142-SDK-1.4.2-7.0.x86_64.rpm (1.4.2-7) and the special version for SAP is the IBMJava2-AMD64-142-SDK-1.4.2-2.0.x86_64.rpm (1.4.2-2).
I have installed it : rpm -ivh IBMJava2-AMD64-142-SDK-1.4.2-2.0.x86_64.rpm
I have installed it and activated it as the default JVM using alternatives command :
alternatives --install /usr/bin/java java /opt/IBMJava2-amd64-142/bin/java 2
alternatives --config java
I now have a different error :
[root@macpro ~]# java
JVM not found: libjvm.so - libjvm.so
What could have I done wrong ?
Thanks for you help

HELP on SAP NW2004s SR1 on Fedora Core 7 using MAXDB

Similar Messages

Maybe you are looking for