Help on SAP SD Cretification ECC 6.0

Hi Friends,
Does any one attended SAP SD Certification on ECC 6.0.
I would like to get model questions and pattren of SAP ECC 6.0.
Regards
Sasikanth.Ch

Hi
A SAP certification will definitely help you understand the business processes and SAP itself. However, you would need to have a fair bit of experience as a functional expert on the domain or on SAP itself.
And most companies demand at least one implementation experience to consider you for roles.
In terms of the certification, you would need to just follow the courseware provided by your SAP certified training institute.
Hope it helps!
Cheers
MR

Similar Messages

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

Creating Datasource and Extracting from SAP R/3 ECC 6.0

Hello Gurus,
I am very new in BI field, I am learning through notes provided in this Blog.
Curretnly I need to know how we create Datasource at SAP R/3 ECC 6.0 (is there any difference b/t these?)
and how we may extract data from R/3 ECC 6.0 Source System.
Looking for your kind reply
Thanks in Advance
KK

You can use any specific Extractors to Create Data Source in R/3 side.
Let me explain with Generic Extraction
Goto SBIW--> you can see all the extractions here
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Info set Query
3. Based on Function module
If you would like to create a custom table, then goto SE11>Select Table>Click on Create (Now create you own table here & use this table while creating Transaction data)
Goto RS02-->Select Transaction data.
Click on Create
Choose an application component to which the data source is to be assigned
Click on Generic Delta
Specify the Delta-Specific and the type for the field.
Specify a safety interval
Select Data type>Save> Now Data source was generated successfully
After generating the data source , you will find Delta Flag checked.
Please go through the following link for Generic Delta
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Once you've done with Data Source in R/3 side--> u need to Replicate it to BI
Goto RSA1>source system>Select the Source system in which u've created Data source>R.C select Data Source Overview>Select the Application Component to which Data source is assigned>R.C Select Replicate dataSorce>here you can see your NEW Data source
Hope it helps!

Error when creatibg a web service in SAP r/3 ecc 5, WebAS 640

We are trying to expose a BAPI (BAPI_CUSTOMER_GETSALESAREAS) as a web service on SAP R/3 ECC 5. web AS 640.
We created the virtual interface (Z_VI_CUSTOMER_BAPI)and the web service definition (Z_WSD_CUSTOMER_BAPI)from SE80. When we try to release the web service definition from WSCONFIG, we get an error saying:
"Error when creating web service(Web Service Definition Z_WSD_CUSTOMER_BAPI for SOAP application unbekannt)"
Please help...
Thanks,
Shailesh

Hi.
I think I must clarify my question.
The Web Service is not called inside SAP R/3 but externally. For testing pourpose I actually use WS Navigator and XMLSpy.
The method inside ABAP Server Proxy which is exposed as a Web Server in SAP R/3 system is the following. Note that the Web Service is Asynchronous.
METHOD zpi_ii_test_ws_4_in~test_ws_4_in.
DATA: lwa_zpi_test TYPE zpi_test.
lwa_zpi_test-mandt = input-mt_test-record-client.
lwa_zpi_test-bukrs = input-mt_test-record-company.
lwa_zpi_test-belnr = input-mt_test-record-document.
lwa_zpi_test-gjahr = input-mt_test-record-year.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
ENDMETHOD.
I have created another Web Service in SAP R/3 which is Synchronous, and the error does not occurs. The following is the method inside ABAP Server Proxy which is exposed as a Web Service in SAP R/3 system.
METHOD zpi_ii_test_ws_3_in~test_ws_3_in.
DATA: l_bukrs      TYPE bukrs,
        l_belnr      TYPE belnr_d,
        l_gjahr      TYPE gjahr,
        lr_belnr     TYPE RANGE OF belnr_d,
        lwa_zpi_test TYPE zpi_test.
l_bukrs = input-mt_req-msg+0(4).
l_gjahr = input-mt_req-msg+4(4).
SELECT MAX( belnr ) INTO l_belnr
    FROM zpi_test
    WHERE bukrs EQ l_bukrs
      AND belnr IN lr_belnr
      AND gjahr EQ l_gjahr.
IF l_belnr IS INITIAL.
    l_belnr = '4700000000'.
ELSE.
    l_belnr = l_belnr + 1.
ENDIF.
lwa_zpi_test-mandt = sy-mandt.
lwa_zpi_test-bukrs = l_bukrs.
lwa_zpi_test-belnr = l_belnr.
lwa_zpi_test-gjahr = l_gjahr.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
output-mt_resp-msg = l_belnr.
ENDMETHOD.
I hope to have clarified my question.
Rafael Rojas.

How to bring BO knowledge (Oracle source) to SAP BI/BW/ECC (source)

Hi,
I currently took a BO XI R2 class but they did not have SAP BI/BW (ECC 6/ R3) and therefore, they used only Oracle DB as the relational database i.e. the source system of data.
Do you have any help for me on how to transition my acquired knowledge into the SAP environment?
I am an SAP BW/BI consultant.
i.e.
Any info on how link BO to SAP BI Cubes/DSO since class did not discuss those?
For example, I saw a requirement, "BO experience with atleast one implementation in ECC6.0" .
I will appreciate any hints to help be bring the two together i.e. BO knowledge (Oracle source) to SAP BI/BW/ECC (source)
Thanks

wrong location

ESS with SAP ERP 2004 ECC 5.0

Hello,
with SAP R/3 we used the Employee Self Services via an external ITS. Now we are using SAP ERP 2004 ECC 5.0 with an installed Java AddIn without Enterprise Portal.
My Question is:
What ways are possible, so that we can use the ESS functionality?
My Ideas are:
1. Use the old external ITS and connect it to the new system.
Problem: Is the connection possible?
or
2. Use the existing services from the internal ITS.
Problem: It seems that some are not working - is it possible to activate them?
or
3. Use the WebDynpro-Technology without Enterprise Portal.
Problem: Will it work?
All information I could find, is, that none of the mentioned ways will work, but maybe someone tried to do the same and was successful.
Thanks for ideas,
André

Hello Andre,
I don't have experience with using ESS web dynpro applications standalone without EP but I believe that should work just fine. We use standalone web dynpro applications for our mobile ISR/PCR approvals where we access web dynpro application directly via Blackberry. You should be able to access any web dynpro application directly without EP iView - for certain services you will need to provide the correct attributes and values via URL though.
Hope that helps you a little bit,
Harald

Locking issue SAP CRM 4.0 and SAP R/3 ECC 5.0

Hi all, I have a problem that I would like to share before creating any OSS message. I have connected our CRM 4.0 environment to our new SAP R/3 ECC 5.0 environment and am faced with a strange problem. All middleware settings seem to be correct, business partners, products, pricing and all are replicated correctly. However when I create a sales document in CRM it gets replicated to R/3 correctly but it remains locked by my RFC user, preventing me from making changes to the replicated document. The BDoc status remains 'in process' and for some reason the lock is not being removed. Does anyone have seen a similar situation and how was it solved? Thanks, Tiest.

Tiest,
This problem may not only be applicable for the combination of CRM 4.0 and ECC 5.0, but for other combinations of CRM and R/3 backend systems as well.
I've bee facing the same problems with CRM 4.0 and R/3 4.70
First check your inbound and outbound queues in both CRM and ECC (Tcode SMQ1 and SMQ2). If no queues are 'hanging', then check the status of your BDoc's.
There are some good OSS notes that help you on these problems.
Hope this helps you...
Regards, Jacques

Encrypt data send from a non-SAP system to ECC.

Hi,
We are tryign to encrypt the credit card details send from web (non-sap system) via a xml file to ECC.
From Basis side, I have exported the public key from the ECC for the web server to encrypt the CC details while sending via xml.
The external web consultants encrypted the cc detail with the public key and send it via xml but that was not able to decrypt at the ECC side.
The developers were using the FM 'CCARD_DEVELOPE'at ECC to decrypt the data in the xml file. It was saying SSF error: No data transfered.
Meanwhile SAP CryptoLib is installed and credit card encryption/decryption is working fine for CC details entered via GUI interface.
Is there anything I am missing out here to encrypt CC details send from a Non-SAP system to ECC.? Do we need to load the SAP cryptolib in the non-SAP system to ecrypt this data at the senders end. Or is there a alternate solution for this ?
We are in ECC6.0/RHEL/Oracle10204.
Appreciate your help.
Thanks

Hi Nelis,
Thanks for your reply.
This note does not get any information regarding encrypting data from a non-SAP system to SAp system.
I am looking setup/information for encrypting data from a non-SAP system to SAP system.
Thanks

SAP CRM and ECC doubt

Hello,
Could anyone help me for my doubt in the SAP CRM.
When have a Two systems SAP CRM and ECC, If we create a role in CRM (Eg. Employee) how this role is transfered to ECC ?

Go to http://help.sap.com/search/sap_trex.jsp, Select "SAP Best Practices" instead of "SAP Documentation" on top.
Hope this helps.
Regards,
Kaushal

Information on SAP: ERP 2004 ECC Component

Hi All,
We are performing a Pilot Project for one of our client, by integrating and harnessing the functionalities of technologies like SAP: Netweaver Portal (GUI), SAP: Exchange Infrastructure (Middleware), Manufacturing Execution System (MES) along with SAP: ERP 2004 (Client's scope).
Request all to suggest a good source (website) for collecting information on ECC component of SAP: ERP 2004.
Thanking you all in anticipation.
With regards,
Deepak Pai

Hi Deepak,
Help.sap.com is the best. Anyways what is area of information you are looking at? is it installation and configuration of the product or is it like what the product would offer.
You can close this thread as you have already posted the same query in the forum "Integration with mySAP ERP 2004"
Information on SAP: ERP 2004 ECC Component
Regards,
Naresh
[email protected]

Difference between SAP R/3 , ECC and MySAP

Hi,
I would like to know the difference between SAP R/3 ,ECC and MySAP. Please let me know the difference , the links earlier found were not getting into my brains.
To my understanding the SAP R/3 4.5b,4.6c - earlier versions contains the basic modules like Logistics(MM,SD) and PP (core functional modules), on technical point the little function modules were obsolete in these version.
4.7 (included the Web application server,for web based and integrating with XI,Enterprise core ,Enterprise Extensions ) + core functional modules +.HR + FI/CO+ SCM (MM,WM,PP) + PLM
ECC (Enterprise Core Component) - ?
MySAP - ?
Correct me and also your answer will help me understand better.
Regards
Shawn

ECC 6.0 means it is an latest version of SAP ERP package (ERP Central components). it will support for netweaver and BW.
Chk this links for more details.
ECC 6.0 clarification
Replacement for CONVERT_DATE_INPUT in ECC 6.0
Upgrade from sap 4.7 to ECC 6.0
Upgradation to ERP 6.0 '2005'
Differences between 4.6C and 4.7 EE
To know the functionality changes you can refer:
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade
Rewards if useful.

RoboHelp V6 - Using Context Sensitivity with SAP R/3 ECC 6.0

We are creating online help/procedures using RoboHelp,
Version 6. We are also upgrading from SAP R/3 4.6c to SAP R/3 ECC
6.0. ECC 6.0 has different backend coding than 4.6c that does not
allow us, at the moment, to implement context sensitivity. My
question is this: Can RoboHelp V6 be integrated with SAP R/3 ECC
6.0 that will allow for context sensitivity? Does coding exist for
this to happen? What must take place for this to work properly? Any
assistance would be greatly appreciated.

Welcome to the forum.
I can't help you on the coding side but is using a URL an
option? If it is, then see my site where I explain how to call
webhelp using URLs. That includes how to open the help pointing to
a specific topic, thus giving you context sensitive help.

Siggestion needed : SAP Certification Program ECC 5.0 versions

hi could you please suggest where i could get good study material for this certification.
SAP Certification Program ECC 5.0 versions
thanks in advance,
Naval Bhatt

Hi,
I have answered this query in detail, please view the below link. Have also provided the link to download the required material for WAS 640 certification.
WAS Certification
rewards points if helpful.
Awaiz.

Is Adobe Interactive Forms compatible with SAP-PM in ECC 6 ??

Hi experts
My question : is Adobe Interactive Forms compatible with SAP-PM in ECC 6 ??
Thanks

Hello,
I can recommend you to search sap official documents for the standard-SAP-delivered-Adobe-forms and maybe there are some for the PM module. Would that help? Or you´ve learnt Adobe yourself? Regards, Otto

Differences between SAP 4.7, ECC 5.0 and ECC 6.0

Hi,
Can somebody provide the differences between SAP 4.7C, ECC 5.0 and ECC 6.0
Thanks
Isaac

Hi Mr. Isaac,
Please open the link given below, Hope it helps.
Difference between 4.7 and ECC 5/6
Regards,
MT

Help on SAP SD Cretification ECC 6.0

Similar Messages

Maybe you are looking for