Help on T61 ABOUT track point and touchpad!

Anyone encountered this problem!
I use the os UBUNTU on my T61 lenovo for almost 1year and its work with
the mouse meaning no problem!
Now I just reformat it into windows XP now the trackpoint and touchpad left button wont work but the right button
working! I already use my original recovery and it not working to!
But when I disable my touchpad button and enable the trackpoint it work
the track point work only if o disable the touchpad!
Even the touchpad wont work in double click only the right click is working
but when I use UBUNTU software both mouse are working!
I already reset the cmos!
Anyone can't answer this pls help!
Thank you

I already boot in dos mode and even in thinkpad recovery explorer the mouse left buttons wont work
meaning if I use Microsoft software the mouse left buttons wont work
but in UBUNTU or LINUX both mouse working well
HELp plus

Similar Messages

Questions about track listing and album

I have burnt my collection of an audio drama I have on CD and transferred them to the Creative Vision M. The problem is the tracks play in alphabetical order, not in the numerical order (as in #1, 2, 3, etc.)
I've gone and used MP3 Tag Editor to check the tracks 3 times. On my Archos, the tracks play according to order by #1(which happens to be the story order). How can I fix this order?
Also, album isn't displayed despite the fact they've been attached using MP3 Tag Editor. The art is displayed on my Zune and the Archos but not on the Vision M.
Help :robotsad:

Eccentric_Hero wrote:
In fact, now that I think about it... I didn't have to edit anything when I first uploaded them to the Archos.Message Edited by Eccentric_Hero on 04-29-2008 06:27 PM
It could have something to do with the file system that was used... my old Zen MuVO played whatever I added in the order it was added because the file system was a external flash drive system. The Zune and the Zen both may use a different file system that plays and sort the tracks based on certain tag info. I know that from what I've read on here that the file system that the Zen uses is the main reason why SD card integration is impossible.
Hope this helps,
Frank.

Please help, simple question about Smart Playlists and Live Updating

PLEASE for some reason I've never gotten an answer on this.
I have a Smart Playlist called "Recently Played" with Live Updating. No matter how I set the parameters, the most recently played *song will ALWAYS appear on the bottom of the list when using my iPhone on the go.* I bolded that because I want you to be aware I'm not talking about on iTunes - I'm aware you can change how the list is viewed on iTunes.
When using your iPod/iPhone on the fly and Live Updating is enabled, is there any way to make the most recently played song appear at the very top???
Thanks so much

Haven't seen that problem before but try the following: in iTunes, right-click the playlist name and enable the option "Copy to Play Order." Then sync.
The normal use of "Copy to Play Order" when you have the playlist displayed in iTunes in some sort order, but you want it to display in the iPod in shuffled order (as it will actually play). Different problem than you are observing, but the same thing "might" help.... Let us know.

I need help, pop up about Certificate Problems and facebook wont work

i keep getting a pop up about Certificate Problems on every page, i just updated my soft ware and i cannot go on facebook.

Trouble Shooting and related keyboard commands:
Startup Manager: How to select a startup volume
Mac OS X: Starting up in Safe Mode
Resetting your Mac's PRAM and NVRAM
"To continue booting, type 'mac-boot' and press return" Message
Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
Mac OS X 10.4, 10.5: Gray screen appears during startup
Mac OS X 10.4 Help: I see a blank blue screen when I try to start up my computer
Avoid unnecessarily resetting the SMC or PMU for troubleshooting purposes
Note: There is NO magic time required to clear the PMU. A firm, complete push is all that is required.
The PMU reset button is a momentary contact switch because the reset only requires momentary contact.
Another myth is that more than 2 chimes during a PRAM reset resets better.
A reset is a reset.
If you need more than is done in a PRAM reset after 2 chimes, use the NVRAM reset in Open Firmware.
Keyboard Shortcuts:
Mac OS X keyboard shortcuts
Keyboard shortcuts - Mac Guides
Keyboard shortcuts in OS X | creativebits
Mac OS X Keyboard Commands
what does "DOS" mean ?? " boot in to DOS ", as you used it ??
Disk Operating System
That would be "DOS like" as in like the screen that you use in booting a Windows machine.
It's the black with white text screen that you get when you boot to Open Firmware (CMD+OPT+O+F)
Booting Mac OS X

Help with queries about boot camp and partition, please.

Hi, I am hoping to partition my HDD. I have done this before, when I first got my macbook but got rid of it, and now I can't fully remember the do's and don'ts' of boot camp. I just need a few questions answered before I take any action.
1. I have a 120GB HDD with about 15GB free space. If I partition the drive will I lose any data on my existing HDD?
2. What is the minimal amount of space I can partition the drive and install Windows?
(I have a copy of Windows XP SP2, and really only need to install it for the use of one program that isn't available on the Apple operating systems.)
3. I tried using Parallels in which Windows took up about 6GB, will it be about the same again? I uninstalled it because I found it to lag a bit.
If you can help with any of these queries I would really appreciate it, thanks!

Maybe you should first get a larger drive; you don't have much more than the minimum 10% free space that Mac OS needs.
Retry with Sun's VirtualBox. Maybe you just need more memory.
Lose data? Step #1: backup.
You may need to backup and erase your hard drive and then restore.
I'd invest in 300GB drive though.

Help me plz ,about pn-begda and pn-endda

hi everyone.
what do "pn-begda" and "pn-endda" means?
it always EQ "18000101" and "99991231"
can anyone explain it to me ?
thanks very much

Hi Grubby,
pn-begda and pn-endda are depend on the selection options for the period.
Example:
1) If you select radio button Today then the values for pn-begda and pn-endda are
pn-begda = 20070905
pn-endda = 20070905
2) If you select radio button Current month then the values for pn-begda and pn-endda are
pn-begda = 20070901
pn-endda = 20070930
3) If you select radio button Current year then the values for pn-begda and pn-endda are
pn-begda = 20070101
pn-endda = 20071231
4) If you select radio button Up to today then the values for pn-begda and pn-endda are
pn-begda = 18000101
pn-endda = 20070905
5) If you select radio button From today then the values for pn-begda and pn-endda are
pn-begda = 20070905
pn-endda = 99991231
For other period, you can enter the dates for the Data selection period and person selection period.
I hope you understood.

T42 2373-PS5 IBM Track Point and Ultranav are not working well

I have a T42 2373-PS5 and recentrly reinstall the OS, when I press on the left button or try to access to any application i wasn't able to do it, when I press the left button I have the functionality of the right button, and the left button are disable, and cannot use the trackpoint or the ultranav option

Have you checked the settings on the ultranav software?
Keith
Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

About watch points and break points...

Hi ,
How many watchpoints and breakpoints can be used in each program?

Hi Eswanth,
I think at a maximum of 30 breakpoints can be used in a program.
Are you going to appear for a sap certification exam or what .
All the best .
Reward if useful.
Regards,
Muneesh Gitta.

Windows 8.1 install crashed my keyboard and touchpad

I attempted to install 8.1 last night having forgotten about the warnings. Had the black screen of death this morning. After rebooting Windows reverted to 8.0. But now my keyboard and touchpad arent working. Says the ps2 compatible drivers arent
working. Every reboot and driver update I try does nothing. any help would be greatly appreciated.

keyboard and touchpad arent working.
Sounds like a laptop? Which model? Is there any alternate input you can use? Touch? USB for wired or wireless?
Can you at least use your keyboard when booting? E.g. get into the Command only boot?
Robert Aldwinckle

AE CC 2014 Camera Tracker Not Allowing Me To Create Nulls From Track Points

After Effects CC 2014
iMac OS X Version 10.9.5
Pro: 3.2 CHz IC i5
32 GB 1600 MHz DDR3
NVIDIA GeForce GTX 680MX 2048 MB
I have been trying to use AE's camera tracker for two days and while it will track, show the track points, and even create a camera... It will not allow me to right click the track points to create nulls and it will not show any of the plain targets. My work around was to upload my footage (Red Epic footage) to the older AE CC, re set up all my ins and outs, track the footage, save it, and open it up back in AE CC 2014. Then it allows me to create track points and such.
Great that I found a work around but takes so much time. Please help me if you can. Thanks!
Chris

There is obviously some bug regards of resolution of tracked footage, because if you precompose e.g. Epic 5K footage to HD comp and camera 3D track this comp then all works OK (points are displayable, selectable and camera is "addable"(?)).
But I don't know "trigger" resolution value, when it works, and when not.

New Member but with a question about my Predator and erecovery disks

So far I have tried several routes to recover my Predator AG-3620 desktop and so far it's been a "fail"each time. Originally tried to go with the recovery from the USB (will not accept USB for some odd reason),then decided, okay, let's get the erecovery disks from Acer (system specific) and they arrive scratched. Nogo there,...Acer sends a second good set and I go about the recovery steps and get a "Install incomplete. Windowsfailed to fully,..." Sooo, figure okay MAYBE, just maybe, it's the HDD,...go get a NEW HDD, and attempt anotherrun of restore,...again, no go. By this time I am really flustered,...(I've done recoveries on other systems, noproblem) SO I come up on Acer community in the Predator (Gamers) area and get a few good Ideas,...but nonehelp as I still have a dead (in my mind, you can't use it, it's dead) desktop that is a FANTASTIC system,...butnow I am having to resort to using the wife's laptop to look for ANY way I can get my system back up andrunning. I have checked cables, memory, and even gone the Ubutu route and Microsoft sys software down loadjust to get to Windows so I can get that puppy up and going again. ANY help is appreciated at this point and I mean ANY!!! Please save me from this Compac Celeron Laptop I amhaving to deal with in the meantime!!!

Hiya!
It would only use data when either you initiate the data (either connecting to the browser or other apps, or manually poll your email) or when your device pulls the email.
Now there are many variables to how much data is used, but in my travels of the interwebs, I have come across This data calculator which should help a bit. I'm with Rogers and don't use that carrier, but the tool works nonetheless.
Hope that helps
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Reminder on forum pages about awarding points?

This isn't for me, since at this rate I will be a Level 4 in something over 600 years, but I was wondering if there could be some kind of discreet and short (clutter avoiding) but highly visible, reminder or announcement on the forum pages, themselves, about awarding points and the points system.
I realize that for most helpers here the satisfaction of helping someone, and maybe even getting a thank you, is enough, but a thank you can be made more meaningful with very little effort.
Many new members are oblivious, don't bother to read the Help and TOU, at least not very carefully, myself included when I first registered here. I see so many not bothering to award points I think, not out of indifference, but simply because they aren't paying attention. Often a question will be marked answered, but no points awarded - not simply to close off the thread, as in some cases - but when there has, in fact, been a genuine solution.
Could there be some form of gentle reminder, avoiding pushiness, at the top of each of the pages? I know there is already the "Solved and Helpful still available" in the actual thread, (and "Answered question, Unanswered question with answer points still available Unanswered question at the bottom of the page"), but I think for many who haven't understood the points system to begin with, these may not even register- or be very noticeable.
If this has already been discussed and dismissed please excuse.

Eric W wrote
We are looking at changes in the future to make it clearer to everyone (new and older users alike) on how the system works.
Thanks Eric; could this include, possibly, some sort of simple notice at the top of the forum pages (as described above, discreet, non-pushy, non-manipulative and, short)? I don't see how this would violate "other forms of encouragement are frowned upon." It would seem to me Apple has everything to gain by creating a more "encouraging" climate for helpers to do their work here. As it is, it must be somewhat frustrating at times.
A Brody wrote
Come in here more often if you feel you have the knowledge of how to offer the best answers.
I'm not sure what this is supposed to mean. With respect, A Brody, am I detecting some needless sarcasm, or am I misunderstanding? I certainly don't presume to offer the "best answers." Is making a simple suggestion presumptuous of me?
You can lead a horse to water, but you can't make them drink.
Agreed. But I wonder if the horse even knows the water is nearby.
People come in here with varying levels of free time. You can't expect everyone to be able to spare the time to mark a thread one way or another.
How much extra time does it take to mark a thread one way or the other? Wouldn't many more people do this only if they were made more aware?
Everyone would and should carefully read the lengthy Help and TOU. But human nature being what it is, most people, especially people interested in finding an answer to a more or less urgent question. are not going to take the time for that. They might, however, pay attention to a short notice.

Keeping object between tracking points

Hi everybody,
i hope someone here might be able to help me out. I am working on a greenscreen project right now and i am stuck because i need to place a picture not on an tracking point but right between 2 tracking points and scale with the distance between them.
Every time i do the tracking the picture scales perfectly, but moves closer to one or the other tracking point.
Is there any way how to keep the picture centered between the tracking points even if the tracking points are at different heights?
Thanks for help
Lobo

Not really. You'd only be replacing one workaround with another and in the end spend too much time for nothing. If you really have a pressing need, you should really look into one of the other tools. After all, they all provide a trial period which may help you gauge them by using them in your current project. Some time invested in learning them and then immediately seeing results is certainly spent better than waiting for some script to mangle your masks for you. ;-)
Mylenium

Moving a track point

heya
i'm using match move to track a file to multiple tracking points because my hero crosses infront of the tracking points (so they go offline).
so i want to analyze motion on one tracking point, and then switch the tracker to a new tracking point to continue the motion analyzation. how do i do this?
thanks

Sorry to disagree with you Adam, but I'd recommend the offset track option. It will save a lot of time over creating multiple clips with behaviors.

Need help asap about point and shoot for inside

trying to take pictures for auction listings, don'thave a lot of experience. have been told about canon powershot and panasonic lumix - could you tell me what will be the easiest for me to use and give me the best inside pictures of objects to list - thanks!!!!

The key to getting a good picture is to make sure that you can control the light and less about the exact camera as long as you do not purchase any junk.
For auction images, you should invest in a small light box setup with multiple strobes/flashes that illuminte the item properly. In order to do this, then you should get an inexpensive SLR. You should also get a small tripod and remote shutter release that will allow you to make correctly focus pictures.
Currently, Nikon and Canon are head to head when it comes to image quality with Nikon edging out Canon since they have recently introduced some really great lenses. Sony is doing OK, but remember Canon and Nikon own 90 % of the camera market and the other 10% is left to everyone else. Sony is having some problems with ISO images that contain a lot more noise than Canon or Nikon.
Check out www.dpreview.com and www.luminous-landscape.com for reviews by photographers.
I do not work for Best Buy and am not affiliated with them in any way. I like HT and want to help people improve their HT experience. "There is a LOT more than just having a TV to make a home theater"

Help on T61 ABOUT track point and touchpad!

Similar Messages

Maybe you are looking for