Help on Time type 0903, Identifying Schema and Rule configuration?

Can you please help me with the following:
1. What is time type 0903?
2. How to identify schema and rule configuration?
3. How do I identify the number of employees affected in case I have to make a configuration change?
Thanks

Hello,
1) Time type is identified according to what purpose it is used. Check table T555A for details on why it is used in your configuration.
2) There is no configuration in schema and rule. Schema and rules has the programs in them.
3)What configuration changes you are planning to do? Depending on this we can then try to identify who is affected.
Hope this answers your questions.
Let me know if you need more info on how to configure time management and write schema and rules.

Similar Messages

Need help in Time Evaluation schema and rules

Hi Gurus,
1)Can anyone help me with Time Evaluation schemas and rules with some example?
2)Where can I find good documentation on Time Schemas and rules?
3)what are the practical Interview questions I can expect on Time management?
I would really appreciate If you could guide me on this..
Thanks
Avy

https://forums.sdn.sap.com/click.jspa?searchID=15025266&messageID=5372783
https://forums.sdn.sap.com/click.jspa?searchID=15025266&messageID=5903057

Simultaneous development on PY schemes and rules

Dear Colleagues,
I'm working for a big company in the IT department and I'm responsible for the process payroll. We have a lot of developers, who are working on payroll schemes and rules simultaneously for different demands and different go live dates.
The problem we are faced with is, that after go live of a demand or a project, in which a scheme or a calculation rule is included, sometimes an error occurs because of transported statements in schemes or rules, which are not already finished within another demand.
Example:
Project A and Project B is working on the same payroll scheme. Project A has been finished and went live (including the statements of project B), but project B has not finished the development and some new calculation rules or operations are missing on the productive system. Because of this, an error occurs when running the payroll.
Question:
Is it possible to deal with payroll schemes and rules similar like workbench objects? That means, is there any functionality availiable to block those objects for editing, when it is already included in a transport request?
Thanks in advance for any idea or help!
Kindly Regards
Adem Demir

No problem. At some point you will have taken a copy of iteration one's project and added that to CVS as iteration two. From that point onwards your iteration two index would be the same as iteration one. If you added keywords to it, it would be the index to use for iteration two. The index for iteration one would be unaffected as it would still be in CVS in a separate project.
Things only get a little more complicated if you are working on two different iterations of the project at the same time. If this is the case it may be better to finish one iteration first and copy the <projectname>.hhk file into the other project. Provided you haven't rrenamed or deleted any topics all references will be fine.

HR schema and rule function overview

Hello, is there any HR schema and rule function overview there ? I mean for example function VARST, ADDDB, HRS, PCY etc., which are under PE01 and PE02 available to use.
Thanks.

Schemas can be viewed and modified through pe01. Schemas use functions and Personnel Calculation Rules (PCR).
PCRs can be viewed and modified through pe02. Time Evaluation PCRs use operations such as HRS, VARST, ADDDB and OUTWP. Payroll Calculation PCRs use operations such as RTE, NUM, AMT, VARGB, ADDWT and OUTWP.
Functions and Operations can be viewed through pe04, along with their parameters.
Documentation on Functions and Operations can be viewed either in the schema or rule by selecting the object + F1 (or the ? icon), or through pe04.

Undigesting XML with Schema and Rules

We currently use a Digester with schema and rules files to digest an input XML and automatically build our Java objects. What I'd like to know is if there is a REVERSE process? Is there any class or utility that can take those Java objects and build an XML file?
Thanks,
Rich

Ask Microsoft why IE6 does not validate. Normally server-side developers do
not rely on a browser to validate XML against schema or DTD but validate XML
on the server. The same is true for XSLT transformations...
"Benoit Degreve" <[email protected]> wrote in message
news:aqnihv$l75$[email protected]..
Hi everybody,
I'm trying to validate an XML file with a schema but it doesn't seem to
work.
I open the XML file (that doesn't match the rules that are in the schema)
with a IE6, and there is no errors...
I have the same problem with a DTD (its reference is in the XML file like
shown in my book)...
Does the validation process have to be done by a specific application ?For
the schema ? For the DTD ? In other words, does IE6 make the validation
process automatically ?
Could someone help me ?

What are schemas and rules in HR?How it will use in HR?

Hi HR Proff,
What are schemas and rules in HR?How it will use in HR?
Give some documentation on this?
Early reply is highely appriciable.
Regards,
Chow.

Refer this link -
http://www.sd-solutions.com/documents/SDS_Payroll_Schemas.html
Regards,
Amit

Input Help for TIME type field

I saw below discussion regarding a dropdown for a "TIME" type field.
Re: Time Search Help
It's a resuable component (that Thomas Jung created) and find it very slick.
I just couldn't make it to work. I'm getting a dump when I pressed the dropdown on the "TIME" field.
I was wondering, has anyone used this in conjunction with select-options (WDR_SELECT_OPTIONS) ?
I'm getting a system-dump, "Component usage VALUE_HELP does not exist". I double checked the name that I used on the "USED COMPONENT" tab and it is VALUE_HELP.
During method ADD_SELECTION_FIELD (for IF_WD_SELECT_OPTIONS) I'm using two parameters I_VALUE_HELP_TYPE = 'APPLDEV' and I_VALUE_HELP_ID = 'VALUE_HELP'.
Maybe I'm not using the right parameters ?
Anyway, I would appreciate if anyone could give me directions to correct the problem.Or maybe there is another and better way of having an input help for a "TIME" type field on select-option.
Thanks.
Vic

That is because the TIME is a freely programmed value help and freely programmed value helps are not supported by the Select-Options component. That limited is listed in the online help:
Type of input help specified as type IF_WD_VALUE_HELP_HANDLER.
Note that only ABAP Dictionary-based input help and OVS input help are supported; freely programmable input help is not supported.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/bf07361248003de10000000a11466f/frameset.htm
The reason for this is that the freely programmed value help is accessed via a component usage. The Select-Options however are a separate component. They have no declaration to your components, component usages. Therefore they produce the error that the component usage doesn't exist - which is correct. It doesn't exist in the Select-Options Component.

0HR_PT_2 How to get back historical data for new report time type

Hi All Expert,
We have implemented and using the 0HR_PT_2 extractor for the past whole year. The Delta is working. Recently, there is requirement to read more data from the ZL custer table, and more new BW Report Time Types are added to extract such data.
The delta doesn't pick up the the past whole year data of the new report time type that we added.
Do we need to re-initialize the load to get back those historical data every time when we add a new report time type?
Please advice and Thx
Ken
Edited by: Ken Hong on Feb 27, 2008 9:24 PM
Edited by: Ken Hong on Feb 27, 2008 9:25 PM

P.s, all hidden files are shown in es file explorer as this backup folder was hidden originally. It has a '.' in front. So I'm pretty sure the folder it's gone, but as I've not erased my phone again, shouldn't the folder be somewhere in my SD card still and how can I find it using my Mac?

Namespaces of Time type

Dear experts:
I want to confirm with you that does all the time type's namespaces should started with Z* or Y*? or any kinds of characters?

Hi,
We can create the Time type start with numeric and charcterstics. There is no problem if we create the numeric or charcterstics.
Regards
Devi

Access to run time type information

Hi,
I am looking for some information on how I can enumerate run time type information (lists of properties and methods) from within LabVIEW. For instance, I would like to be able to generate a list of controls on a front panel (this I figgured out), and then dynamically generate a list of properties for a selected control. Anyone know how to do this one?
Thanks,
-10

Thanks Ankita. I might poke around a bit more. Most languages have hooks into run-time type information for controls and components (like an activeX control) you can query it to get this information and then display it in a property-setting dialog box. There is most likely something like this in LabVIEW too.
-10

Changes to Schema or rules

Hi All,
We are using customised schema which consists of some customised rules as well.
1. How can I trace what changes are done to Schema or rule at what period and by whom?
2. I wish to take whole back up of schema and rules into a PDF file for future reference. How can I do that.
Thanks a lot.

Tracing is not possible.Only the last changed user will appear in attributes.
Go to Tcode SE38, Use the report RPDASC00
Give the schema to be expanded saved,
give all the sub schemas in that schema,
Check the two boxes
Execute and save in a notepad.

Null value for int and datetime date type in xml schema

hi:
I am embarrassed by a qustion in xml schema; i defined a xml schema file like
this:
<elementFormDefault="qualified" attributeFormDefault="qualified">
<xs:element name="test">
<xs:annotation>
<xs:documentation>Comment describing your root element</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="name" type="xs:string"/>
<xs:element name="password" type="xs:string" nillable="true"/>
<xs:element name="user" type="xs:int" nillable="true"/>
<xs:element name="s_time" type="xs:dateTime"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
and I send this file to workflow clientrequest() node, I wanted to receive data
in this schema file.but when i send null value to the element "user" and "s_time"
in workshop test tool(test soap),and use function in xmlbean like isNilUser or
isNilStime, one error occur.
I don't kown why, I had to ask the engineer of bea in china, one told me a bug.
is that true?

Visakh16 I cant agree more with you on it, it is good but in production u cant have them change maxrows. I think
Patrick Hurst is a better option. debug the package have it running and move up
Please mark as helpful and propose as answer if you find this as correct!!! Thanks,Dia Agha .
Hmm..Why do you need to change it in production?
What I suggested was to tweak the setting in dev machine so that it interprets the Excel file datatypes correctly when doing development. Once mapping is set correctly then it will work fine when in production or in any other environment. The tweaking is
just to make sure it interprets the datatype correctly at design time and has nothing to do with production deployment
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

EJB-QL and date/time types

Hi,
as far as I understand, EJB-QL does not support date/time values.
Does anybody know how to work around this limitation?
Using long values containing milliseconds is not an alternative, because the database stores
date/time values.
I need to compare these date/time values to input parameters in finder methods.
Suggestions?
Bye the way, is there any reason for this limitation in EJB-QL, or did they simply forget to include
date/time types to the spec?
Greetings
Christian

Greetings,
Hi,
as far as I understand, EJB-QL does not support
date/time values. Actually, it does - EJB QL supports all types supported by a bean's abstract schema (IOW: available types for CMP/CMR fields). However, therein also lies the crutch - EJB QL is for querying beans, not the resource to which they map (EJB QL's similarity to SQL is purely for convenience; an Entity Bean, it should be remembered, may represent entities in any persistent store, not just RDBMSes). Therefore, you should be thinking in terms of Java types, not SQL ones... The specification, however, does place "restrictions" (ie. minimally required [vendor] support), on their use which should be limited to long millisecond values (by which a Date object performs an equals comparison... ;).
Does anybody know how to work around this limitation?Depends on what you're attempting. If you're using a Date as an argument to a finder, eg:
findByDateInRange( java.util.Date start, java.util.Date end )then this shouldn't pose a problem where your EJB QL would look like:
SELECT OBJECT(a) FROM MyBeanSchema AS a WHERE a.myDate BETWEEN ?1 AND ?2Presuming the bean MyBean contains a CMP field of type java.util.Date called 'myDate'. If, however, you must use a literal date then you will have to use a long literal unless your vendor supports otherwise. However, it might be worth noting that EJB QL must still be mapped to the underlying resource QL (eg. SQL), and so a more intelligble value (one that meets the resource's format requirements ;), could be used in the actual rQL statement.
Using long values containing milliseconds is not an
alternative, because the database stores
date/time values.I'm guessing you mean here something like "04/23/2002" and "13:13:35", etc. This, however, is not how the database actually stores the data - input/output formats such as these are supported for the convenience of us 'nuerically-challenged' humans (similar to internet hostnames vs. TCP/IP addresses ;) - nor do Java Date/Calendar/Timestamp types store them this way.
I need to compare these date/time values to input
parameters in finder methods.
Suggestions?Ah, yes. Well then... refer back to the above. :)
Bye the way, is there any reason for this limitation
in EJB-QL, or did they simply forget to include
date/time types to the spec?The EJB QL does not explicitly support any specific types beyond those "supported by an EJB's abstract schema", which is pretty much any Java type that can represent a compatible resource type. The reason for the noted "restriction" on date/time types, however, is (likely) due to the way the associated Java classes (not to mention the back-end resource), handle/represent these data internally and this gives the vendor an easily achievable minimal level of compliance for supporting these types.
I hope this helps.
ChristianRegards,
Tony "Vee Schade" Cook

I bought an ipad from some one and i can't activate it and it keeps on showing that i should type the apple id and password link to that ipad which i dont know and i can't even locate thi guy. Please help if there is a chance to activate the ipad. Thanks.

I bought an ipad from some one and i can't activate it and it keeps on showing that i should type the apple id and password link to that ipad which i dont know and i can't even locate thi guy. Please help if there is a chance to activate the ipad. Thanks

There is no chance at all that you can activate the iPad without the previous user's Apple ID and password. That is the feature of iOS 7 Activation Lock.
Every time I read one of these post, I can't help but think that the user asking about this (in this case - you) was duped into purchasing a stolen device. If the seller was legit, they would have erased the device completely before they sold it.

Help on Time type 0903, Identifying Schema and Rule configuration?

Similar Messages

Maybe you are looking for