Help on using Creditial Mapping

i m using default credential provider, i need to test the working of it could any
one plz tell the step by step procedure to assign mapping between WLS user and
EIS user and check how it is working

In sales order,these quantity updating in Tatget quantity,look at VBAP Table ..
You will get good idea..
Reward Points if it is helpful
Thanks
Seshu

Similar Messages

  • I want to use my maps... But it says that it cannot determined my location...how can I use it? Help please...thanks

    I want to use my maps... But it says that it cannot determined my location...how can I use it? Help please...thanks

    Do you have location services turned on? See Settings > Privacy > Location Services
    In any event Maps can be used to obtain directions by supplying the start and end locations after touching "Directions" in the upper left corner.

  • Creating context-sensitive HTML Help without using Map #s

    I am uisng RH 8 and am producing a compiled HTML Help file.
    I am wondering if there is another way to call a topic from our application without using the MAP numbers in RH.
    The developer would like to use the MAP ID (string) instead.
    Is there a way to do this?
    Please let me know.
    Thanks.

    Your points are valid but there are also situations when urls are an excellent method.
    For some projects our developers name fields and we have a method of identifying the name applied. We use that as our filename. By that means they know what the help file will be and can create the call before the topic exists and we don't have to maintain map ids for those projects. If we should fail to create the topic, the call has the logic to go to a higher level.
    I wouldn't advise using map ids or urls, I would say understand how both work, their pros and cons, and then decide what works for the project.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • IPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time.  Have looked everywhere and it's driving me nuts.  Thanks for any help on where to make the change!!

    iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc.  Have looked everywhere and it's driving me nuts.  Thanks for any help on where to make the change!!

    iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc.  Have looked everywhere and it's driving me nuts.  Thanks for any help on where to make the change!!

  • How do I use Port Mapping?

    b How do I use Port Mapping?
    (This document will assume that you are using and ABS/AEBS/AX as an internet router and have DHCP & NAT turned on.)
    Sometime you may want to offer access to a computer on your AirPort network to users on the internet, whether it be a web site, or for file sharing, or just remote access for yourself when traveling. If any of these sound like something you want to do, then you need to understand how Port Mapping works.
    b AirPort as Firewall
    Most of the time your AirPort base station will not let any traffic into your network which did not originate from your network. It will let everything out and replies to your traffic back in, but it will not let sessions initiated on the internet side of the base station in to your network. This is what is referred to as the "NAT firewall" capability of the base station and it provides effective protection for your network from the internet. What Port Mapping does is poke a hole in this wall to allow certain type(s) of traffic into the network and direct this traffic to a specific computer on the network. In the firewall world this is commonly referred to as an "inbound proxy" or "inbound translation" rule or "PAT" (Port Address Translation) in the router world.
    b The Need for Manual Addressing
    Since a Port Mapping entry in the base station configuration requires an inside private IP address to be specified, the computer to which to mapping entry applies should always have the IP address specified in the mapping entry. Thus, DHCP should not be used for a computer offering services on the internet as the Port Mapping entry will no longer work if the target computer's IP address changes. In general, an Apple base station's DHCP server will try to assign IP addresses in the 10.0.1.2 to 10.0.1.200 range. IP addresses above 10.0.1.200 can be Manually assigned to computers and other devices on the network up to 10.0.1.254. 10.0.1.255 is reserved (it is the broadcast address for the 10.0.1 subnet). To Manually set up the TCP/IP information for a Macintosh running Mac OS X, go to System Preferences -> Network and "Show" the appropriate interface (Ethernet or AirPort) and click on the TCP/IP tab. Select "Configure Manually" and enter the following information:
    IP address : 10.0.1.201 (or whatever address you decide to use)
    Subnet mask : 255.255.255.0
    Router IP : 10.0.1.1 (the AirPort base station LAN IP)
    DNS server : 10.0.1.1, or whatever DNS server IP your ISP uses
    After making these changes verify that your computer can still access the internet and local resources on the LAN before continuing.
    b Port Mapping a service
    In our example we will be hosting a web site on a computer which we have given an IP address of 10.0.1.201. Basic web sites are accessed using the HyperText Transport Protocol (HTTP) and this protocol typically uses port 80 to communicate. In order for others to see the web site, we must configure a Port Mapping entry in the base station configuration to not only allow the web browsers in, but to tell the base station what IP address the web server is using. The Port Mapping entry has three parts: Public Port, Private IP, and Private Port. In this case you would use the following values:
    Public Port : 80
    Private IP : 10.0.1.201 (this is the computer hosting the web site)
    Private Port : 80
    In order to access the web site from the internet, users must reference the base station's WAN port public IP (determined by looking at the base station configuration summary page in the AirPort Admin Utility). Since this address may change over time, you might want to use a Dynamic DNS service to simplify connecting for your users.
    Sometimes the port you wish to use may be blocked by the ISP. In this case, use a different non-standard Public Port number for the service, but keep the Private Port standard. In the above example, if the ISP was blocking port 80, you could potentially use 8080 instead, so:
    Public Port :

    Public Port : 8080
    Private IP : 10.0.1.201
    Private Port : 80
    Your users would then have to enter "http://<publicIP>:8080/" (where <publicIP> is the public IP address of the AirPort base station) to access the web site.
    b Internal Access
    It should be noted that when accessing these services from within the network you cannot reference the Public IP/Public Port, but rather you must use the Private IP/Private Port. Thus, "http://10.0.1.201:80/" in the above example.
    b Limits and Options
    There is a maximum of 20 Port Mapping entries that can be made in an Apple base station configuration. If you use an AirPort Extreme or AirPort Express base station there is an option which can be helpful in the case where you need many ports opened to a single computer. This is the "Default Host" option. When using this it is not necessary to use Port Mapping at all as all ports will be opened to the specified "Default Host". This is found in "Base Station Options". The default IP address for the "Default Host" is 10.0.1.253. You may change this IP address. The target computer must be Manually configured as specified above with the same IP address. Since all ports are now open to this computer, you should enable and configure the Mac OS X firewall on the default host computer to protect it from intruders.
    b Useful Related Links
    <a href="http://docs.info.apple.com/article.html?artnum=52002>"Designing AirPort Extreme Networks: Manuals</a>
    "Well Known" TCP and UDP Ports Used By Apple Software Products
    IANA Port Number Assignments

  • When using a personal dropbox account, is it possible to use the mapped drive without downloading all my dropbox files to my hard drive as well?

    When using a personal (not business) dropbox account on my mac book pro, is it possible to use the mapped drive only?  Currently I have dropbox mapped to my computer but it is also saving a redundant copy of the data on my hard drive.  My goal is to pull, edit and save files on the mapped drive only without having a redundant back up of all my dropbox files on my computer wasting valuable storage space.   Any advice out there?  Thanks in advance for your help!

    I don't believe that is accurate, but maybe I am missing something (I am not a Windows user).
    Looking at 2 explanation of how to map a Dropbox as a drive…
    http://lkeng.org/wp/?p=147
    https://www.youtube.com/watch?v=5d8uvseVr5A
    Both of those are linking to the 'local copy' of Dropbox. It is not a true 'network' drive as far as I can see (it still requires the local copy on the PC).
    Another video suggests using another service to mount the Dropbox, but that is not using Dropbox anymore, it is going through Otixo…
    https://www.youtube.com/watch?v=FAIpm2qmglU
    Dropbox does not provide easy to use URL's to mount as a network disk so I don't think this is possible on OS X.
    Dropbox's forum has this too…
    https://www.dropboxforum.com/hc/communities/public/questions/202133795-How-to-ma p-dropbox-as-a-network-drive-on-Mac?loca…
    You may need to examine the Windows computers carefully - if they have Dropbox installed & running then all the files are stored on the local machine in addition to the 'mapped drive'.
    It looks to me like people are 'redirecting' the local copy to appear like a remote disk just so they can address that path on other machines - each PC is being setup the same. You could create aliases on OS X, but it doesn't help move files off the machine.
    Hopefully someone else will contradict me, but I don't think this is how Dropbox works.

  • How to use Google Maps by Visual Composer?

    Hi all,
    I'm creating some simple applications by Visual Composer in which I wanna use a Google Maps in VC,
    and i have now successfully got to the STREET, POSTL_CODE, CITY and COUNTRY came from the BAPI.
    (i am trying to use the Bapi_Customer_Getdetail2.)
    but,i didn't get how to connect Table View and Html View.
    I have already checked the below links. but i fail to understand how to do it.
    Re: Google Map and VC
    Help on google maps
    https://wiki.sdn.sap.com/wiki/display/VC/Using%2bGoogle%2bMaps
    I have many unknowns, could you tell me how to use Google Maps by VC.
    (* About Our VC viersion : SAP NetWeaver Visual Composer EHP1 SP2 for SAP NetWeaver 7.1)

    Some thread are say that create the URL fields. like the below messages.
    The STREET, POSTL_CODE, CITY and COUNTRY come from your BAPI. The other variables url* are default values to create the URL that is requiered for walweb.
    URL1 'http://walweb.nl/walweb/picsfromspace/maps.php?LanguageRadio=dutch&AddressInput='
    URL2 '&ZipcodeInput='
    URL3 '&StateInput=&CitycodeInput=&CityInput='
    URL4 '&CountrySelect='
    URL5 '&ZoomSelect=17&PoiInput=hidden&PoiButton=Interessante+Punten'
    Where should I create those fields? at the Table Vies?
    and also i dont get where should i set the below. is that setting at the [[Map Data]]-[[Assigned Value]]??
    STORE@Url1 & @STREET & STORE@Url2 & @POSTL_CODE & STORE@Url3 & @CITY & STORE@Url4 & @COUNTRY & STORE@Url5
    best regards,
    Masahiro Minagawa

  • ERROR WHILE USING XSLT MAPPING IN INTERFACE MAPPING

    Hi,
      We are using an xslt mapping in our scenario but while i load the XSLT mapping in the interface mapping i get a message :
    Transformer configuration exception occurred when loading XSLT
    sorce interface :outbound and asyncronous.
    mapping : XSLT mapping (imported as a zip file)
    target interface: abstract,asyncronous.
    The xslt runs well in standalone and its well formed and there is no name space issue.
    please help if any one has faced such a situation while using XSLT mapping.
    regards,
    Anirban.

    Hi Anirban
    When you say it runs well <i>standalone</i> what exactly do you mean? Which XSLT processor are you using to run it? There are subtle difference between XSTL processors that can sometimes result in incompatibilities. For instance, I have seen XSLTs run correctly in XMLSpy but incorrectly (or at least slightly differently) in XI.
    Regards,
    Thorsten

  • Help Need in Graphical Mapping.

    Hi
    Can you do help for mapping between my file structure to BAPI structure..this is auctully  file would call BAPI for 1: N(file having various headers and line items, each header and associated line items would able to call BAPI in target side).
    Now i am just trying to do test using following map...but following error came when i am checking in IM. But when i am doing test this map in MM editor using Duplicate subtree it is working fine.
    <b>ERROR: Mapping program Message Mapping MM_request | urn:testing does not match the interface mapping. The number or frequencies of source or target messages for the message mapping are not identical to the number or frequencies of source or target interfaces.</b>
    I thought some where i made wrong..!but it is difficult to find out for me! i dint find any wrong in my mapping.
    map like this:
    Sourcefilestructure:       TargetBAPI
    Messages (1:1)            Message(1:1)
    Message1(1:1)             Message1(1:1)
      MT_Request(1:1)  
       Recordset(0:U) -->     BAPI_INCOMINGINVOICE(0:U)
        HDR   (0:1)            HeaderData(1:1)
         Filed(0:1)   -->       filed1(0:1)
         Field(0:1)   -->       field2(0:2)  
                    HDR--->   GLACCOUNTDATA(0:1)
         LINEITEM(0:U)--->      item(0:U)    
           field1(0:1) --->       field(0:1)
           field2(0:1) --->       field2(0:1)
    Thanks,
    Regards
    Sankar!
    Message was edited by: Sankar

    Hi,
    You have this error message when inside your Interface Mapping you uses occurences which are NOT these one defined in your Message Mapping.
    In your Message Mapping, look at tab "Message" and keep in mind the occurence.
    Then in your Interface Mapping, do the same action and compare both occurence.
    Mickael
    Message was edited by: Mickael Huchet

  • Advantages of using XSLT mapping

    Can any one explain me the advantages of using XSLT mapping compare to graphical.java and abap mappings

    Hi
    Please go through the below links for details on XSLT Mappings..
    XSLT Mapping
    /people/udo.martens/blog/2006/04/26/xslt-recursive-templates
    Thread:
    Sample XSLT mapping required
    XSLT Mapping Links::->
    /people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
    /people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    XSLT Mapping with java enhancement
    /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
    XSLT - ABAP.
    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
    exception handling errors in respect with XSLT mapping
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8a/7672f7d7e444439fd7024f806221a4/content.htm
    Hope this will help
    Regards
    Piyush
    **reward points if found useful.

  • When to use which mapping in Scenario

    Hi,
           When to use
    1. ABAP MAPPING
    2. JAVA MAPPING
    3. XSLT MAPPING
    4. GRAPHICAL MAPPING
    When to use these mapping at what type of interfaces we should use them.
    Regards,
    Nissi

    Hi,
    Hope the following link gives you an idea of use case of different mapping techniques
    [Mapping Technique|http://wiki.sdn.sap.com/wiki/display/XI/Mapping+Techniques]
    [ABAP mapping implementation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/a15a5f77-0c01-0010-cfa1-94ca75306537]
    [XSLT mapping implementation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/0654b462-0c01-0010-4d9d-d2d5a7fee0d6]
    [Java mapping implementation|http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm]
    To give an example, Usually file content conversion feature of file communication channel does not support the content conversion of structures with deep hierarchy then in that case we can go for XSLT mapping as with graphical mapping we cannot create text file for structure with deep hierarchy.
    You get more understanding on the use case when you develop different scenarios there are too many to list.
    Hope this helps !!!
    Regards,
    Amit

  • How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0).

    Hi,
    I am looking for this document: How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0), and not able to find it.
    Can anybody please point me the location, to look for, or post the document.
    Thanks,
    Namadev

    Hi Namadev Chillal  ,
    These r the links containing PDF docs which u r looking for:
    how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
    Excellent PDF Document on Mapping
    http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
    Mapping Development with the ABAP Workbench
    http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
    ABAP Mappings
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm

  • Change Filename using XSLT mapping without variable subtitution

    Hi,
    My scenario is IDOC to file...i am using XSLT mapping, i want to change the filename format to OUT_<Purchase Number>_<DDMMYYYYhhmmss>_KKKK.txt, i cannot use UDF function as i do XSLT mapping i also i cannot use variable substitution as the target structure doesn't have PO and timestamp as tag elements. Can i acheive using writing a adapter module? I appreciate if anyone could help me with this..
    Many thanks

    >
    Ravibabu Adari wrote:
    > Hi,
    > If i go with Option1: what changes i need to do in the file adapter to tell the adapter to pick the filename from XSLT ?
    > If i go with Option2: To which element to the target structure should i map the filename using UDF ? do i have to add additional element to the target structure? what changes i need to do in the file adapter to tell the adapter to pick the filename from Message mapping ?
    >
    > Many thanks
    Hi,
         in both cases you need to enable file adapter specific properties and enable the file name...
    for this you need to use the dynamic configuration properties for the same...
    usage of this option using udf in message mapping is rather easy than to use in XSLT...for this you dont need to change the structure in the message mapping...message mapping is just needed for execution of the udf.. thats it..
    HTH
    Rajesh

  • How to skip first TWO Lines of   .txt  file    using XSLT Mapping

    Hi Friends  ,
                              I have an .txt file in has the format as
                               <TEST>
                                4564564545
                                56456444566
                                56465
                                    How can i skip the first two Lines when i am writing the XSLT Mapping ?
                              That <TEST> and empty line shouldn't go the rfc  .
                             How can i skip and sent to rfc  using XSLT Mapping ?
    Best Regards .,
    V.Rangarajan

    you can avoid the empty lines in your File Content Conversion by defining offset.
    <i>Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
    This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.</i>
    ref: http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
    then the generated XML after FCC will not have the empty lines.

  • How to send mails to dynamic receivers using XSLT mapping

    Hi All,
    I have a problem with the mail attributes in xslt mapping. I have a condition on a source field, based on which the "TO" attribute should vary.
    For Example :  If ROOT/HEADER/XYZ = 001 then receiver should be some abc email id
    If ROOT/HEADER/XYZ = 002 then receiver should be
    pqr email id.
    Can anyone help me out of this
    Thanks in advance.
    Regards,
    Lakshmi.

    Hi Lakshmi,
    you have to create an appropriate mapping for this. As said, the mentioned mail package format will be your message. The message will be analyzed by the mail adapter and after this the TO field will be filled with the correct value you will use. The structure inserted into the content fields will be send in the mail body or, if set in the configuration, as an attachement of the mail (as far as i know (-; )
    Example:
    Original structure:
    <ContentStructure>
      <ValueA>ID1</ValueA>
      <ValueB>XYZ</ValueB>
    </ContentStructure>
    Extract of an XSLT-Mapping (as an example, you can use the mapping type you prefer):
    <ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
      <Subject>Subject</Subject>
      <From>namea(at)company.com</From>
      <To>
        <xsl:choose>
          <xsl:when test="ContentStructure/ValueA='ID1'">
            nameb(at)companyb.com
          </xsl:when>
          <xsl:when test="ContentStructure/ValueA='ID2'">
            namec(at)companyc.com
          </xsl:when>
        </xsl:choose>
      </To>
      <Reply_To />
      <Content_Type>text/plain</Content_Type>
      <Content>
        This is the content.
      </Content>
    </ns:Mail>
    If you try something like this, you will be able to set the TO email address dynamical.
    Rregards,
    Lars

Maybe you are looking for