Help on Video Preview and Burn

I have used Premier Elements 8 for a while with no difficultty and am now using Premier Pro CS5. My work in Premier Pro CS5 shows up fine in the monitor window, but whenever I do a dynamic link to Encore my work just appears in a window much smaller than the monitor size. Ok, what am I missing? Any help appreciated.

Have you saved the PDF(s) to your computer to be able to search in the User Guide(s)?
CS5 User Guides - online and PDF
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

Similar Messages

Is it possible to make a video preview and export it from edge animate?

is it possible to make a video preview and export it from edge animate?

Hi Johan,
If you are looking to export video through Edge Animate.
Well, there is no direct way to do it but you could use a screen recorder to make an mp4. Then you can import the mp4 in PS and if you have the plugin for gif then you just save aa a gif.
Regards,
Devendra

Interlacing problems with iDVD Preview and burning - comb effect appalling.

When using iDVD to burn content onto DVDs, I suffer from "comb effect" interlacing related problems both in the iDVD Preview and with the final product played on a computer. I have yet to play the disc in a "real" DVD player.
I am editing HDV (60i) footage with FCE 4, exporting (both interlaced and de-interlaced - same problem) to 1920x1080 HD at a Quicktime movie, and then importing the clips to iDVD.
The clips are short (under 10 minutes) and play back perfectly on Quicktime.
Once imported to iDVD, the iDVD Preview displays (especially with motion scenes) four areas of horizontal jagged edge areas, which are spectacularly distracting.
Here is an example:
http://i164.photobucket.com/albums/u4/praxisuniversal/InterlacingProblem.jpg
I have tried various settings using iDVD, but have not been met with success. In other, similar discussions, people have had luck with other software programs, but I am reluctant to spend great gobs of money if the Apple Discussion Brain Trust can find a way to circumvent.
Thanks!

Check out the JES Deinterlacer website and see if it helps. http://www.xs4all.nl/~jeschot/home.html

Sequence Settings Video Previews and GPU?

Dear PrP CC Users,
I wanted to get some information partaining to sequence settings.
In the bottom box of Sequence Settings: Video Previews. There are three un/tick boxes:
Maximum Bit Depth
Maximum Render Quality
Composite In Linear Color (requires GPU acceleration or max render quality)
Normally I tick all of them. I have a Windforce GTX 770 4GB CUDA mercury engine enabled. I have also set to Optimise rendering for: Performance.
My questions are as follows.
-Do these selections effect the final output of a timeline for delivery or is it merely for during regular playback and preview rendering?
-Also, when I export using Media Encoder through dynamic link, is it bad to Use Previews for a faster export, often I export to ProRes4444 for Grading, I heard that Preview files will always differ as its created by the GPU and can slightly change the colours dependent on the GPU you have, thus is it better to export and allow it to re-render using the CPU in Media Encoder (I always set maximum bit depth and quality)?
-Lastly, in the export process, when I select Maximum Bit Depth, there are options of the bit depth value (32, 48, 64) does this become redundant since I checked maximum bit depth?
Thank you.

The first two boxes only affect previews. The same boxes in the Export Settings dialog will override those and determine the output.
Using previews for export is generally not a good idea, as doing so will incur an additional compression step. The exception is when the previews are lossless (or nearly so, as with DNxHD).
Not working with ProRes, I've never seen those options.

Video converting and burning home videos

Do anyone know the best program to convert my sonyhandycam video files and then what software I should use to burn these home videos onto a DVD? Sony's software is not compatible with Mac and iMovie won't recognize them! iDVD is not on my Mac (just purchased a few weeks ago)!!

The current Apple thinking is that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that nothing could be further from the truth has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD.

HELP WITH VIDEO FILES AND PUTTING ON ITUNESSS!!!!!!!!!!

hey...i need help with my video ipod and itunes....i recently had sum problem with my ipod and i had to restore it...and when i hooked it up to itunes all the songs got back on it...its just that the videos never got updated with the songs....the videos are converted and were workin fine....now when i select the folder to put it into the itunes it says processing and nuttin happens...this is drivin me crazy anyone know how to fix this ****??
THX
5g ipod video

ok...i just uninstalled itunes and installed the previous version...and it worked fine....

Blu-Ray video capture and burning with G4 Power Book ??

Good afternoon.
Has anybody figured out this route with a G4?
If so, please explain in nauseating details! Hardware, software, etc.......
Thanks for your time!

Thanks for your reply.
It's also my understanding that OS X doesn't natively offer Blu-Ray support, and that an external Blu-Ray player/burner is required (see OWC) along with capture and burning software (Toast 10).
I'm wondering if anyone has tried and succeeded.

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

Multiple Problems after Leopard upgrade HELP! Video display and FW problem

I don't know if this is related.. but I've been battling multiple problems ever since I upgraded my G5 to Leopard a week ago. Everything was perfect under Tiger.
Well, I think I've got everything solved except two last things.
1. My 750GH Maxtor Firewire drive... when I plug it in... does not show in the desktop and it causes both my internal drive and two other Firewire enclosures to disappear from the desktop. I can see all of them mounted in the disk utility, but if this one drive is plugged in.. all icons disappear from the desktop. If I unplug or unmount the 750GB drive.. everything comes back.
I've reformatted this drive, etc. This does not happen on my MacBookPro. The drive mounts fine on that. I've tried different cables, I've tried USB (it's a triple interface Maxtor) and nothing seems to work. I would assume there's something wrong with the drive and not my desktop... but the drive works fine on the MacBookPro.
PLEASE!! Any clues would help...
The other problem that only occurred directly after upgrading to Leopard... is that my graphics now get corrupted and garbled. I've got two video cards running two LCD monitors. The card giving me problems is the ATI Radeon 9800 Pro (256MB). What happens is.. first all the window shadows and top menu bar start getting checkerboard patterns.. then the whole screen starts getting variants of different colors and checkerboard patterns. After awhile and refreshing the screen a few times... the problem goes away for a bit. Then comes back.
Again, this card and my entire system and drives were working fine under Tiger. Now, I don't know if I have a bad card? Is there something wrong with Leopard on my G5 2Ghz DP? Did my Maxtor 750GB triple interface drive just go bad with the upgrade?
I don't know where else to look, I'm guessing the "geniuses" at the Apple store won't help me since this machine is out of warranty. Any help would be HUGELY appreciated. I've been battling all these problems ever since I started the Leopard upgrade 4 days ago and have not got much sleep.

The drives not or disappearing on the desktop could point to the need to do a pram reset.
I believe you hold down the apple-option-p-r keys at startup and listen for a couple of chimes.

When I try to import video frames to layers in Photoshop CS6 all I get is a solid green screen where the video preview, and the layers are supposed to be. How do I fix this?

I am using a Mac OS, and even if I select a random chuck of video and convert it to layers the layers from that are still the solid green image; not the video.

Are you trying to import a silent MP4? I had the same problem, when when I switched it to an MP4 with sound - I don't know why, but it worked.

How Content-Aware Fill can help with Video | Short and Suite | Adobe TV

Content-Aware fill in Photoshop is a powerful tool for generating clean plates in Premiere Pro. Karl Soule’ provides some examples.
http://adobe.ly/zpuKyy

Great idea that I can definitely apply to some video that has a similar (set of!) problems. Thanks Karl!

Capture video and burn to DVD

I want to convert a movie playing in my ie browser at this
address:
http://dynamic.abc.go.com/streaming/landing
(the Lost episodes)
to burn to DVD.
How can I do that?
I have flash 8 if that helps.
Thanks,
Trint

atsidi Wrote:
> I want to convert a movie playing in my ie browser at
this address:
>
http://dynamic.abc.go.com/streaming/landing
(the Lost episodes)
> to burn to DVD.
> How can I do that?
> I have flash 8 if that helps.
> Thanks,
> Trint
if these episodes are in flash format, you can convert them
to video
format and burn dvd easily. i always do in such a way, using
the
program i have- Flash to Video Encoder PRO (it's on
geovid.com), it
burns dvd after conversion just in one click!

Mac pro HDMI video preview goes yellow solid and turns off by itself often

I work with 2 monitors. main monitor is Apple thunderbolt cinema display 27", and second monitor is LG HD tv connected through HDMI of MacPro.
when I use aftereffect, I use my LG TV as video preview, and it goes yellow solid and turns off itself very often.
I use Final Cut Pro X and, davinci 10 lite with LG TV also, but it works well in these condition.
It makes trouble with aftereffects only.
I hope it can be solved.
thank you

thank you, tim.
English is not my first language. so I'm not sure I fully understand with this.
I will show you my full hardware setting
* Does preview on the LG monitor work at all? When does it go yellow? When does it turn off?
- it works initially. A few minutes after I start making RAM preview, yellow screen appear(the RAM preview keeps going anyway),
if I stop the video preview(command + /), and restart video preview, it turns on normal,
but if I don't stop video preview, 10 or 20 seconds later it turns off by itself, and all the options in 'Output Device' disappear except 'Computer Monitor Only', so I should restart After Effects to turn on video preview.
* When you have the problem, if you open Activity Monitor, is Adobe QT32 Server running?
- yes, it(it appears red characters, is it normal?) looks running
* Do you have Premiere Pro installed? Does it have the same problem when previewing to the LG monitor?
- no, Premiere Pro works well.
- I tried to remove Blackmagic Codec.component , but it didn't solve my problem
let me know if you need more information about this.
thank you again.

Video Preview not Working in CS6

Before AE CS6, I was using AE CS 5.5 on my MacBook Pro (model 8,3) and I could always go to AE Preferences:Video Preview and choose my additional monitor for previewing. I was previewing my Stereo 3d comps perfectly on my 3D hdtv through a HDMI to Mini Display Port cable.
I now have a Mac Pro and AE CS6 and in that preference, the "Output Device" dropdown only lists Firewire and Computer Monitor Only. With my old setup, I could choose my TV and everything was great. But this new setup won't allow me to see or choose my TV.
Please help! Has anyone else had this problem? Has something in AE CS6 changed for external monitors? I can't tell if it is CS6 or the fact that I have a new Mac Pro and it's video card might be different...

That's a great lead. I realized that Final Cut Cut Studio 6 was on my laptop before but it is not on my new Mac Pro. FC Studio 6 includes a bunch of codecs as I recall. So I went to install it on my new Mac Pro and I got an error message that said my Mac cant install Power PC architecture (or something like that) and wouldnt let me install it. Any Idea how I can get those codecs without installing FC Pro 6?
PS: I tried AE CS6 on my TV and it worked like a charm. There were lots more option in the Video Preview Preference.

Movie Preview and movie track don't match

Hi there..
i've imported a movie slideshow (created in fotomagico) into garageband, with the intent of adding chapter markers. However, the movie timeline on the top of the page, doesn't match the view preview window. Ie. the view preview is showing clips that is ahead of where my video timeline is.
Anyone know how to fix this?
When I click on the markers I made, it does show that I'm in the right spot, but i am having more and more trouble trying to figure out where i really am (as per the timeline, or video preview)
any ideas?

i'm almost glad that didn't help (i would have felt really stupid!)
no, unfortunately that didn't help.
The good news is the music and video match up perfectly, its just what I'm seeing in the top half of my screen (Movie Track), is one thing (ie lets say slide 52), but what I am seeing in video preview (and hearing) is lets say slide 56.
it gets to be anoying because i cant easily locate specific scenes to add chapter markers. plus id really like to know that i am not marking the wrong spots!

Help on Video Preview and Burn

Similar Messages

Maybe you are looking for