Help! One chunk of audio missing

I'm putting together a highlight reel of my son's football footage, using a sequence for each game, and adding music to some parts of the movie. Then I put all the sequences together to make my movie. I've done this sort of thing a number of times before with no problems. Everything seems fine in FCE and I export my movie.
When I go to iDVD, for some reason, right when one of the songs is supposed to come in, all audio disappears for the rest of that sequence. The next chapter then starts and everything is fine. I tried changing songs thinking that was the problem, but it wasn't. I've gone back and re-exported a number of times, but for some reason this 3 minute block of my 30 minute movie has no sound. Any ideas? Thanks!

The mixdown audio should have gotten it.
Try trashing the prefs and doing it again. use FCP Rescue:
http://www.pistolerapost2.com/fcprescue
Shane

Similar Messages

  • Help needed: audio missing - export to html & pdf

    audio missing - export to html & pdf
    both soundtrack and audio on specific pages play fine as slideshow and as export Quicktime.
    exports to html & pdf are missing audio entirely.
    the audio assets are not in the html folder.
    i am not doing anything complicated, one .tiff image per page, approx 12mg apiece.
    one soundtrack and one additional page specific audio track.
    box checked for saving audio files in preferences and while 'saving'.
    tried triggering with 'begin audio' builds.
    tried different approved formats for audio.
    tried different themes. at default settings.
    i am out of ideas. any suggestions?
    much appreciated.

    Sound files are not included in html or pdf exports. There is no way to make it happen. If you need the sound you can export as Quicktime.

  • Only getting one channel of audio with mic HELP

    I had been using Garageband with the built in mic to do my podcasts. I just got some real gear.
    Here is what I got... M Audio USB fast track, MXL V63MBP running on 10.3.9
    I am only getting one channel of audio through the mic. I have the settings on the mixer right and I have gone in the sound preferences and made sure it was right.
    On the track in garageband, I made sure that the real instrument settings were set to Stereo. I have been messing around with this thing for an HOUR and I am still only getting one channel of audio. I've done everything I've been able to come up with in google and still nothing works. If anyone has any ideas ,that would be swell because I'm beginning to think that the crappy built in mic on my mac is looking really good about now.

    You're welcome.
    The common confusion is that 'Stereo" means two speakers and "mono" means one. Stereo actually means two different signals going to the two speakers. Since a Mic is a mono input device, you set the track to mono so that the same sound comes out of both speakers. Enjoy --Hang

  • Multi-Take Cycling Audio Missing Revisited...

    Apologizes for all the typos in a previous email on the multi-take recording audio missing. I have since done some research and have better terminology to use so I'll restate. I believe this could be a bug and want folks to be aware of it at the very least.
    Someone else posted a problem with the "cycle multi-takes" saying that after using pieces of several takes on one track, as done in the instruction video shown in the link below from Apple, his problem was the audio showed up but was not playing at all. I have done the same thing, but the audio just disappeared in 2 out of 10 of my takes, nowhere to be found. It played perfectly while I previewing and deciding what to use, and all takes are still appearing in the drop down list, but when you select them, they are empty. Tried to post a picture of my screen, but can't figure out how to do that!
    http://www.apple.com/findouthow/music/garageband08.html#tutorial=multitake
    The only thing I did different from the video was to make a new track and copy the multitakes to it, decide what I wanted where and copied it back to the main track after splitting it appropriately.
    Thanks to all that offer help on this discussion board!

    I believe I have the same problem. When I record multiple takes and then CMND+T to split the track and use different takes, they disappear, re-appear, and sometimes are lost again for good. This is the worst sin a software developer can make--losing a musician's best takes.
    I am furious at Apple for this, particularly since Apple Care has consistently claimed ignorance. Apple if you're reading this, you have made a mess of several nights work on several occasions for me. Thanks a lot.

  • Chunks of graphics missing

    G'day folks,
    I have written a program which uses a gui, which is a number of JTabbedPanes with JPanels etc, I have the repaint() in there and the program works beautifully on the 8 different computers that I have tested it on which runs from a P150 on Win98SE to a P1.7 on XP, all have jre1.4.1_01, I am having trouble with one particular computer which is a dell P!!!833 with 256 MBRAM running on WinMe. When you click on any tab, the titles of the other tabs dissappear and chunks of graphics go missing (sometimes textfields, labels, whole/parts of panels), I have run it from the command line and there is no exceptions thrown when this is happening so I don't think it is a problem with the program(plus the fact that it works perfectly on 8 other computers). I dug through the archives and found a reference to problems with sony viao products whcih people reported as having problems with getting the blue death screen and they decided that this was due to some of the ATI chips and the 3d graphics in java not working coherently, however the symptoms are different, there is no blue death screen only chunks of graphics missing.
    The said computer runs all windows based programs flawlessly, it is only with java (but there are no exceptions thrown, which is wierd cause I've written stuff where there are graphics errors e.g. making a tabbedpane as the contentpane and then when you switch between tabs you get a whole buch of paintcomponent errors etc - there is none of this).
    I've basically narrowed it down to being a problem with this one computer and was wondering if anyone could maybe shed some light on the more technical systems networking or any other suggestions!
    the said computer has an ATI mobility Rage 128 graphics chip.
    Thanks alot for your help,
    Oz!!!!!!

    If it runs fine on 8 other computers, that should pretty much tell ya there's some problem with the video of the problem machine.
    A simple test is to right-click on screen and bring up screen Properties, go into Settings, then Advanced, then Troubleshooting panel and turn "Hardware Accelaration" all the way down.
    Usually that will fix such problems, and if it does, points to a problem in the video drivers having bugs in that machine. If that does fix it, you can try updating the Video drivers and see if that works.

  • In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

    In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
    os x, Mac OS X (10.6)

    I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum. 

  • Windows 7 professional - one or more audio services are not running

    I have a windows 7 professional laptop. The audio stopped working suddenly. When i click on the audio icon (with a red x on it) the system tried to troubleshoot the problem. This is the error i see in the troubleshooter.
    One or more audio services isn't is running
    I tried to start the windows audio, windows audio endpoint builder. Neither of them started but gave some error.
    When i tried to restore to a previous version i got an error message that there are some bad sectors on the C drive but could not run the checkdsk on that drive. Instead windows offered me to run it at next reboot. I did multiple reboots but the chkdsk never
    ran.
    I am don't have a windows reinstall disk. Can somebody point me where i can get the windows OS to reinstall it?

    Hi,
    You can contact the Original Equipment Manufacturer (OEM) of your computer for obtaining
    replacement disks and manuals.
    For computer manufacturer contact information,
    visit the following Microsoft Web site:
    http://support.microsoft.com/default.aspx?pr=oemphone
    More information about How to replace Microsoft software or hardware,
    order service packs, and replace product manuals, please see the following KB article:
    http://support.microsoft.com/default.aspx?kbid=326246
    Hope it helps.
    Tracy Cai
    TechNet Community Support

  • Why is audio missing from movie

    why is audio missing from movie

    I think I may have confused you a little bit, sorry.  Hope this might be easier to follow.
    1.  Copied nieces VHS tape to DVD discs.  Tape runs approximately 2hr. 39min.
    2.  Put first part on work copy 1.  This consisted of the lead up to the ceremony and the ceremony itself, ending with still shots of the wedding party, in the park.  About 1hr. 1min.
    3.  Put second part on work copy 2.  This consisted of the wedding reception, beginning to end.  About 1hr 38min.  No possibility of overlapping content.
    4.  Ran both work copy 1 and work copy 2 on the VCR that's hooked up to the TV.  (Not the Toshiba copy machine).  Both ran through, beginning to end with no glitches.
    5.  Opened Adobe Premiere Elements and loaded work copy #1 so as to make three finished copies, one for bride and groom, one for bride's parents, one for groom's parents.
    6.  When placed on the timeline, contents of work copy 1 had no audio for VTS_01_1.VOB while VTS_01_2.VOB and VTS_01_3.VOB were whole.
    7.  Tried for several days to eliminate the problem with no success.  A.P.E. showed file sizes of .99GB, .99GB and 47MB respectively.  The 47MB is actually about 2 minutes of still pictures of       the wedding party.  I was not going to attempt to burn the project until correcting the audio problem.
    8.  Wrote in to the community forum and happily received your response.  Tried every thing you offered without success.  Though I am thankful for all your time and effort.  While nothing worked       so far, I have learned a few things and will retain my notes so as to keep this information at hand.  (Don't know how you're able to maintain all that info).
    9.  At this point, in view of the results of step #4, I thought to try Windows DVD Maker to see what developed.  Loaded work copy 1 into that program, which recognized the audio in the first clip       (VTS_01_1.VOB).  I did not run the work copy, beginning to end, in this program.  But I felt that as long as the audio was present in the first clip, this program would allow me to burn the           copy.  When the burn button was pushed, I received the error message "Will Not Fit", and the duration of 30 min for clip 1, 30 min. for clip 2 and 25 hours and 30 min. for clip 3.  Clip 3 being       the 2 minutes of still pictures.  After trying unsuccessfully to remedy this problem it was time to try a different approach.
    10.  Opened A.P.E. and loaded work copy 2 onto the timeline.  Successfully made three finished copies of this disk in a short period of time.
    11.  Took the VHS tape back to the Toshiba to make another copy (work copy 1A) of the first segment.
    12.  Played copy 1A in the TVs VCR and it played fine, no glitches.
    13.  Opened A.P.E. and put work copy 1A on the Timeline.  This time there was audio in clip 1, which could be seen on the audio line, but it was the audio from work copy 2.  This, even though       I had deleted the files from work copy 2.
    14.  Accepted the fact that this has become a career.  Can't imagine what you're thinking.  Since beginning this endeavor I have become much older and grouchier.  My dog will no longer walk         with me.  Neighbors go back in the house when they see me coming.  Oh, and my wife sticks out her tongue and makes funny noises whenever I turn my back. 

  • One clip loses audio

    I have been bringing in clips fine, but one drops the audio in the sequence. Any suggestions?
    Thanks

    as enzo suggests ... the facts of life are that every now and again, for no appreciable reason, a clip may capture with no audio or no video ... ghost in the machine... if you capture enough clips you'll get used to it.
    i used to look after a station that captured vast numbers of clips daily ... every once in a while a single clip would be missing audio or video whilst hundreds of clips on either side, on the same or different reels, would capture with no problem ... at the end of the day its just a computer based system and errors do happen
    its one clip out of many, just recapture, its not worth your time or trouble stressing out over it

  • HELP!! Certain Audio Regions aren't playing

    HELP!! certain audio regions in my session just suddenly stopped playing. other ones around them play its like they're on mute but they're not! I dont know wat to do

    Have you tried to reset GarageBand?
    Go to the "My Songs" view to save your current project, quit GarageBand, and the open the "Settings" app. Scroll down to the applications and select "GarageBand". Enable "Reset".
    Check, how much free memory is left on your iPad.  Playing certain instruments requires a lot of memory. You may need to make more space by deleting apps or documents, i.e. videos, photos, music.
    iOS: Troubleshooting applications purchased from the App Store
    If all fails, try the three R's - restart, reset, restore:
    http://support.apple.com/kb/TS3281
    Regards
    Léonie

  • I'm using Photoshop Elements 12 on Windows 8.1.  When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour.  How can I restore the original toolbar?

    I'm using Photoshop Elements 12 on Windows 8.1.  When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour.  How can I restore the original toolbar?

    Thanks for your help - your suggestion worked beautifully.Dennis Hood
          From: 99jon <[email protected]>
    To: Dennis Hood <[email protected]>
    Sent: Thursday, 15 January 2015, 15:20
    Subject:  I'm using Photoshop Elements 12 on Windows 8.1.  When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour.  How can I restore the original toolbar?
    I'm using Photoshop Elements 12 on Windows 8.1.  When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour.  How can I restore the original toolbar?
    created by 99jon in Photoshop Elements - View the full discussionTry re-setting the prefs.Go to: Edit >> Preferences >> General (Photoshop Elements menu on Mac)Click the button Reset Preferences on next Launch If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7099161#7099161 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7099161#7099161 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • When combine multiple PDFs into one, some letters are missing and display wrong letter

    Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!

    I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.

  • ONLY ONE CHANNEL OF AUDIO WITH SONY PMW-200

    Hi,
    When I automate to sequence using video shot on my Sony PMW-200 I only get one channel of audio, when the preset in Premiere clearly states 8 channels of 24 bit audio. If I drag a clip to the timeline all 8 channels are there, but then I have to trim the beginning and end of each clip in order to do transitions, which would take forever on a wedding video. There must be other PMW-200 users who have this same problem. I am shooting in UDF mode 422 at 50 mb/sec on the Sony and just updated my Premiere CS 6.
    Thanks,
    Ed

    similar question, I found a thread that may solve your problem: Sony PMW-200 file import into Premiere Pro CS6 only get 1 Ch. audio, you can go for a look. Or you can try some converters to help you.      Handbrake, any video converter, ffmpeg,imixmxf, transcode them first, then reload into premiere.

  • HELP! : No "Export Audio To Movie" option

    Hi
    I've just finished a sync project and need to 'export' to movie. When I go to the file menu or right click on the movie track, the "Export Audio to Movie" function is not there.
    PLEASE can anybody help. I have to deliver the pitch tonight. I'm running 9.1.3 64bit.
    Many thanks
    Jules

    Mike is right. The reason why Logic9 doesn't have the Export Audio To Movie feature is the current state of Quicktime. Remember that the basic video capabilities of Logic are not written into the Logic code but outsourced to the Quicktime components in OSX (Don't invent the wheel twice). Based on a statement by Steve Jobs, the new Final Cut version should arrive in 2011 and you might think it will be 64bit, dragging QuickTime along with it, followed by a quick Logic update - maybe.
    If this helps, here is my current workaround:
    I work in 64bit with a separate project file for each music cue on a video based project. When I'm done, I bounce the audio.
    Now I have also one master project, that also uses the current video and has the exact (important) sync settings. I use that project to import each previously bounced audio cue. If your sync settings are the same with all the individual projects and the master projects then you can import one or many audio files and with one command "Move to original recording position" all the audio files line up perfectly in sync.
    _The advantages of that master project_:
    1) You run that project in 32bit mode and therefore are able to use "Export audio to movie"
    2) You can make rough mixes of your video (audio against dialog) for approvals or your own reference. Having these little videos with you at the dubbing stage can take prove very easy if the music editor messed up your cue.
    3) You can export videos of individual cues, sections or the whole video (at least reels, if the movie is broken down in separate reels)
    4) Easy handling/mixing of separate cues that overlap
    5) Quick comparison of different versions of a cue which of course are all imported into the master project6)- Quick timing references for Cue Sheet preperation
    7) In case of a picture edit, this the master project is also an amazing tool to figure out how messed up your music will be with the new picture cut. Im

  • One track of Audio in the timeline

    I am only getting one track of audio in the timeline when I drag my clip from the viewer. In the viewer the audio is in stero, but when I drag it to the timeline it only one channel. Is there a setting that I change to get two channel of audio in the timeline?
    Thanks for the help
    JEFF

    Right (or control + click) over in the patching bay at the left of the timeline and see if it sees both a1 and a2. Assign the one you can't see to a patch and that might bring it back.

Maybe you are looking for