Help! One of the 2 monitors dead
Hi all,
I have an old Dual 2 GHz PowerPC G5.
I have 2 of 20" Cinema Displays connected and one of the displays just went black w/ occasional flickering.
It was the one connected to the DVI output.
The one connected to the ADC is fine.
So I swapped the monitors to see if it's the monitor or the video card and it wasn't the monitor.
Any monitor that's connected to the ADC output goes black.
So I'm thinking it's the video card and I should replace it.
Am I correct or can there be any other problems?
Also, I'm not too familiar with replacing a video card.
I've never done it before.
Is there anything I should know in replacing a video card such as compatibility and dangers?
The card currently in the G5 is GeForce FX 5200.
Could anyone please let me know where I can order a replacement or
recommend anything better or cheaper that might be compatible?
Since my G5 is not new, I'm afraid that some new cards might not be compatible.
Thanks!
1 speaker, 1 microphone. All models of the iPhone. The position has been modified, but always just one speaker.
Stedman
Similar Messages
-
The new software update - iOS 7.0.2 is killing the battery in my iPad. I have searched online and taken the recommended measures to decrease battery use, but within hours my iPad is completely dead. It would take days to kill the battery before this update. I am very frustrated. Can I undo this update???
This typically happens when some apps on the phone were interrupted by the upgrade. When it comes back up the app tries to resume and can not. You have to find and kill that app(s).
Do you have an Exchange account?
That is usually the culprit. Go into Settings and turn off all of the toggles for the Exchange account. Then reset the phone (hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears). When the phone powers back on, turn the toggles back on.
Do the same for all mail accounts if you don't have Exchange or that doesn't resolve the issue.
If it is not Exchange/Mail then it could be another app(s).
With iOS 7 you can control what apps run in the background. Go to Settings > General > Background App Refresh. This will list all of the apps that can run in background. Turn them all off and restart. If this fixes the problem turn on a few at a time until you find the one causing the trouble. -
One of the Video monitors is zoomed in
Hey Guys,
I am using CS3 for Mac. For some reason all the video in the right monitor (pardon my lack of terminology) is zoomed in. I checked the scale on each of these clips and they are all 100%. If I double click them to play in the left monitor it plays at the correct size. It must be something simple, but I don't see any kind of filter on the whole video track or anything. Any ideas what that could be?
Thanks,Hi Jim,
Thanks. It is kind of strange though, because I captured the footage directly from the same DV cam I always do (with the same settings). I am mixing the actual dumped video with some still images I imported and they are various sizes. Could this cause it? I am doing the images on a 2nd video track. Any ideas on how to fix?
Thanks,. -
I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?
Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro. -
Need help in understanding the error ORA-01843: not a valid month - ECX_ACT
Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu. -
Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul
Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul
Click on this link for the fix http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
-
I have 2 imac, is it possibel to conect the 2, using one as a seconde monitor?
i have 2 imac, is it possibel to conect the 2, using one as a seconde monitor?
Late 2009 and Mid 2010 27" iMacs http://support.apple.com/kb/HT3924
2011 iMacs Thunderbolt 10.6 Help: Using another Mac as an external display
Stefan -
Monitoring info not appearing in console for one of the managed server
Monitoring info not appearing in console for one of the managed server though server is running fine. It happens some times. I tried to get these info from executruntimeMBean, but that is also not returning any info for that server. The entry for that server get erased from running-managed-server.xml after some time. Any idea why?
hi Arun,
Please find the below diagnostic module config fom the condig.xml
<server-diagnostic-config>
<data-retirement-enabled>true</data-retirement-enabled>
<wldf-data-retirement-by-age>
<name>DomainHealth_WLDFRetirePolicy_m2ap5</name>
<enabled>true</enabled>
<archive-name>HarvestedDataArchive</archive-name>
<retirement-time>2</retirement-time>
<retirement-period>6</retirement-period>
<retirement-age>1</retirement-age>
</wldf-data-retirement-by-age>
</server-diagnostic-config>
This configuration was present earlier also, but it looks like the logs statrted accumulating recently due to some other changes made to console. There is nothing coming under the WLDF console extension in server admin console.
Other than changing the start script, will it be fine to go the file location ./server/data/store/diagnostics/WLSDIAGNOSTIC**.DAT and delete the older file while the server is running now?
Incase not posisible , an example on the change in startscript and the config.xml will b helpful
thanks
JZWL -
My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??
Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
Thanks. Hope my other question has an answer out here.
Paul H -
i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV. -
This is regarding a brand new ASUS PA 279Q, 2560 x 1440 IPS monitor. I'm connected via mini display port (into thunderbolt port on MacBook Pro) to display port on ASUS monitor; using cable ASUS included with the monitor. Mid 2012 MacBook Pro…full specs at bottom of this post.
I have resolution set at 2560 x 1440 which is the native resolution according to the ASUS spec. I tried the other resolutions available in my System Preferences and text displayed rough with those settings too. I've tried adjusting contrast, brightness and sharpness via the ASUS control panel and didn't solve the problem. Also tried calibrating via Mac's system preferences/display and that did not improve text display either. All the text on this monitor (no matter what software I launch, Finder, InDesign, Illustrator, MS Word, Excel, VMWare Windows XP, Windows versions of Word, Excel, Acrobat, etc, all are consistently rendering text the same way --- ROUGH and with "HALOS" around each letter.
All point sizes of text and at various scales, display very rough on the screen. (My comparison is the retina display of my MBP and a Thunderbolt…so those two displays are my expectations.) I'm using the same MBP for both a Thunderbolt display (at work) and this ASUS at my home office.
On the ASUS it's not as noticeable when the text is on white backgrounds, but I'm a graphic designer and compose images with text all day everyday. Not to mention the specs on this ASUS PA279Q indicate it's built for the professional so I would expect better text rendering. I haven't even addressed color calibration and balance yet, because that won't matter to me if the text won't display any better than it is now.
I was so hopeful after researching all the specs on this monitor it would be a viable alternative to the glossy display of the Thunderbolt display. (Which, I do love the Thunderbolt display for it's clarity and how it displays crisp, clean text at all sizes. (This ASUS actually displays text decently if I increase the text so each letter is about 4" high. Which is pointless for practical purposes -- that'd be like doing page layout through a microscope!)
I kept holding off on getting a monitor for the home office thinking the Thunderbolt would be updated soon. I'd be sick if I dropped a grand on piece of 2011 technology only to learn a few days later an updated Thunderbolt display hit the market! Not to mention, I'm praying Apple comes out with a less reflective Thunderbolt display. The glare and reflection is the main reason I looked elsewhere for a large monitor; hence my asking for help. Hoping the ASUS text display issue can be worked out. My expectation is for it to display like the MBP retina and Thunderbolt display text. That possible?
Alternatively, I guess I could do the Apple Refurb Thunderbolt at $799. And see if there's a decent aftermarket anti-glare I could stick on it?
Thanks for reading my post. Hope someone can help; offer any suggestions? Words or wisdom?
Has anyone else had similar issues and figured out a resolution? Help!
MacBook Pro
Retina, Mid 2012, 2.3 Ghz Intel i7
8GB 1600 MHz DDR3
OS X 10.8.5
NVIDIA GeForce GT 650M 1024 MB
ASUS PA279QI uninstalled those two items. It still runs slow on start-up and when opening safari, firefox, iphoto, itunes, etc. It's not snappy like it used to be. Any other ideas? Thanks.
-
Need Help : Urgent : Making one of the record Bold in a Table
Hi Frds,
I am new to OAF.......
I am facing the issue that i have to make one of the record bold in a table...........
By using the query, i m trying to display the payslip
It contains the list of Earnings ,Deductions and NetPay amount..........
this is the part of the query........
select payment_date,element_name,arabic_name,val,balance from
select '0' flag,assignment_id,null payment_date,'Payslip for the Month' element_name,to_char(payment_date,'Month-YYYY')arabic_name,
null val, null balance from xx_payroll_info
where 1 =1
and payment_date = last_day(:2)
and assignment_id = (select assignment_id from xx_people_reporting_info
where person_id = :1)
union all
select '1'flag,assignment_id,payment_date,element_name,arabic_name,
value val,null,balance
from xx_payslip_details_mv
where 1 = 1
and payment_date = last_day(:2)
and earn_deduct = ('E')
and assignment_id in (select assignment_id from xx_people_reporting_info)
union all
select '2' flag,assignment_id,payment_date,'Earnings-Total',null,sum(value) val,null
from xx_payslip_detail_mv
where 1 =1
and payment_date = last_day(:2)
and earn_deduct = 'E'
and assignment_id in (select assignment_id from xx_people_reporting_info
where 1 =1
and person_id = :1 )
group by assignment_id,payment_date
My Requirement is : I have to make the Payslip For the month of , Date, Earnings-Total into Bold..... How can i do this.... plz... help me out in this......
Thanks &Regards,
JayaHi Jaya,
Set CSS Class property as OraDataText for respectiveb column.
OR
/In Controller PR
import oracle.cabo.style.CSSStyle;
CSSStyle customCss = new CSSStyle();
customUnCss.setProperty("text-transform","uppercase");
customUnCss.setProperty("font","bold 16px \"Trebuchet MS\", Verdana, sans-serif");//# -red
OAMessageStyledTextBean styledTextBean =(OAMessageStyledTextBean)webBean.findIndexedChildRecursive("POCommentsItem");
if(styledTextBean!=null)
styledTextBean.setInlineStyle(customUnCss);
Thanks,
Dilip -
I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!
You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81. -
i have two apple id's and id like to combine them to one of the accounts in order to not lose contacts. how do i do that? help...
It is not possible to merge AppleID accounts...once established they stay independent.
-
We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads. The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized. I've tried updating the software, reinstalling iTunes, using different ports on the laptop, different cables...just about everything. I have NEVER been able to connect this one device, but all the others are fine. I'm at my wits end. Is there someone out there who can help a relative novice figure out what's going on? Thanks so much!
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom
Maybe you are looking for
-
Why is my keyboard is not working properly?
I just purchased a new MacBook Pro. When I want a question mark, my 'shift' 6 gives me a ^. When I want a e with s circumflex, it gives me a /. I am properly set on English as my language.Where do I go from here^
-
How to send mail to User when Deadline time is over
Hello Everybody , My Query is that When Deadline is over the mail should goes to Higher Authority Person in his Outlook is that " Dead line given to user is Already Finished " How to Solve this problem .? ASAP Regrads, Sandeep Jadhav
-
I first downloaded Firefox 4 on May 25. I assumed it would start to work, but I continue to get messages on the homepage that say it is not working. The last message I got was that my computer is not protected anymore, because I don't have Firefox 4.
-
Not count parargraphs with no printable characters
This small script below returns the index number of a starting paragraph and the ending paragraph selected within the active Story. How do we not count paragraphs with no printable characters? Ultimately we are trying to incorporate into a spacing s
-
Reminders on ipad--how do i get to alarms for it, and remind me to buy milk when i get to store
reminders app--how do i access alarms for it and tell me to buy milk when i gtet to store