Help! Only 30 secs max export on macbook pro
I edited a 10 minute clip in the timeline.
I can only get a 30 sec export of a clip on my macbook pro. I am working with the project on a firewire drive. When I connect the firewire drive to my G5 and boot the project up it works fine and I get the full 10 minute video exported that I edited in the timeline.
Any help on this will be appriciated.
macbook pro Mac OS X (10.4.10)
Based on the lack of any detailed information, I'm going to take a guess...
Verify that there are no In & Out points set in your sequence.
What format are you editing?
What format are you exporting to?
What version of Final Cut Pro?
What version of Quicktime?
How are you exporting?
Similar Messages
-
Hi, I would like to synchronize the calendar's items of my iPad Mini with my MacBook Pro. At today I can only do the reverse operation (from MacBook Pro to iPad Mini). Can you help me maybe with a little tutorial or something? Many Thanks.
Hello there Tonynos.
The following Knowledge Base article should help with guiding you on how to synchronize information from your iOS device to your computer:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D. -
I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?
Hi,
Check to see that external video is turned on.
View > External Video > All Frames. and
View > Video Playback > Apple Firewire PAL/NTSC.
Sandeep -
Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Please can somone help my in built cameral on my MacBook Pro is not working, the green light does not show again and the camera is not working . what can i do to active it back.
SemakoYuu can try to reactivate your iSight camera by opening up iMessage.. navigate to Preferences/Audio Video,and then click on Camera. IT shoudl be grayed-out if you only have one camera hooked up to your machine. If you have an external camera, then disconnect it from your machine.
-
please help me!!!! my macbook pro 15 running on mountain lion is hanging a lot...sometimes when i use any app than it get freeze for some seconds...what should i do?
Hardware Information:
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
System Software:
OS X 10.8.2 (12C60) - Uptime: 0 days 1:17
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (424.92 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.coresymbolicationd.plist
Problem System Launch Agents:
[failed] com.apple.afpstat.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.rcd.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.google.keystone.agent.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.facebook.videochat.Akshay.plist
[loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
User Login Items:
Sony Ericsson Bridge Helper
BitTorrent
uTorrent
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
Picasa.plugin
Bad Fonts:
None
Top Processes:
14.6 % WindowServer
6.9 % coreaudiod
6.4 % uTorrent
1.9 % WebProcess
1.4 % iTunes
1.2 % EtreCheck
0.5 % fontd
0.2 % NotificationCenter
0.1 % Dock
0.0 % Microsoft -
Need help with my iPhone 5 and my Macbook Pro.
Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
iPhone 5, iOS 6.0.1You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.
-
Help!!! thunderbolt port on macbook pro 10.6.8 not working
Help!!!I have a macbook pro 10.6.8 version. I have been using my HDMI cord via the thunderbolt port to connect my laptop to my TV. I have been using it for 4 months when this week it stopped working. I have changed the HDMI and adaptors but have discovered its something to do with my laptop. Does anyone know how to fix this?
Help!!!I have a macbook pro 10.6.8 version. I have been using my HDMI cord via the thunderbolt port to connect my laptop to my TV. I have been using it for 4 months when this week it stopped working. I have changed the HDMI and adaptors but have discovered its something to do with my laptop. Does anyone know how to fix this?
-
Help! I just opened my 15 " Macbook Pro, and all of my files are GONE! My icloud icon also disappeared. What happened and how do I fix it?
Hi Susan ...
Use Lion Recovery to repair the startup disk and reinstall the Mac OS X if necessary.
Lion Recovery can also help you restore your files from a Time Machine backup. -
Need help connecting my iPhone 6 to my MacBook Pro to stream the internet
Need help connecting my iPhone 6 to my MacBook Pro to stream the internet
Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.
-
Wonder if anyone can help? Have just bought a new Macbook pro and installed FCP7. I thought that I would get quicktime pro as standard but stuck with QTX. Downloaded QT7 but it won't let me install it. Says I can't do install as I already have QTX. Does FCP not come with QTpro or am I jsut being stupid. Any suggestions would be great. Thanks. B
Hi there,
Are you running Lion or Snow Leopard? either way this may help by the looks of it.
http://www.macworld.com/article/161320/2011/07/lion_quicktime7.html
cheers
Andy -
Aperture won't export : Retina MacBook Pro
I've been struggling with getting all sorts of basic stuff to work on my supposedly top spec 15" Retina MacBook Pro, the latest is that it can't seem to export from Aperture. Finder really slow, attaching files to emails takes ages to open etc - so wondering if it is part of this problem.
Has anyone else experienced this. Obviously being a Pro App I'm going to be charged handsomly to talk to anyone at apple.
Occasionally it can export a single image at a time, the export folder location takes ages to open. Select multiple images and select "Exprt Versions" and absolutely nothing happens. Export originals, and it crashes Aperture. I'm begining to wonder just how far you can throw a MacBook Pro.
It really is the most disapointing Mac I have ever bought, lovely display, but if the computer behind it doesn't function its all a little pointless.
Done the usual reboot, disk permissions etc.
Thanks for any pointers
StephenStephen,
It is new (ish, about 90 days, and covered by Applecare) but calling Apple help - as I have previously - as soon as you mention it is Aperture they want to charge money - a lot of it and with no guarantee of results - to talk about any issues as it is a Pro App - pity it doesn't behave like one!
Finder really slow, attaching files to emails takes ages to open etc - so wondering if it is part of this problem.
I'd really let the Apple Store sort out the system and hardware issues, as long as your Applecare lasts.
Make a backup of your system, best a bootable clone on an external drive (so you can easily revert back to your current state, or run your apps by booting into the clone) and reinstall the system without any third party apps and without Aperture, only the basic set of applications.
Then test your mail and Finder, and if issues remain, go back to AppleCare and present them with the proof, that it is the hardware and not the software.
You may find, that it is not Aperture at all, that is causing the problem, but an incompatible plug-in, kernel extension, "helper" applications, duplicate fonts, problems in the Aperture library inherited from iPhoto, incompatible videos in the Aperture library, an unsuitable drive hosting your Aperture Library. Where is the library located, btw? On an external or internal drive?
Regards
Léonie -
Hey!
I have a really strange problem and need answers fast!
Im running the latest version of Premiere CC (2014) on the latest Macbook Pro retina 15 inch, fully upgraded.
When I export, very randomly I get failed video exports. Its in different spots in the export, but the "Glitch" is exactly the same wherever in the video it turns up.
The upper left corner of the video is unaffected, but the rest of the frame "flickers", it looks like every other frame is black.
This problem is not specific to any type of format, it will just happen randomly somewhere in my export.
This is a major problem, im currently having to do all my exports on my coworkers computers.
I would greatly appreciate your help!
Cheers,
SimonFirst off, please always report the exact version number as shown in the About box. We have way too many cases where people report "I'm on the latest" only to determine later that in fact they're not.
If you are indeed on the very latest version, CC2014.1, and if the problem section has Warp Stabilizer applied, then please check whether Renderer is set to use GPU acceleration and, if so, switch it to Software Only. We've had reports from a few customers of a similar problem in 2014.1 with warp stabilizer and GPU acceleration.
If this fixes your encodes, then please report back with your graphics card model and driver version. Also, let us know whether GPU acceleration was working correctly with warp stabilizer in the prior version. -
Hi there, my internet is crashing everytime I use my macbook pro/safari it happens roughly every 2 mins, it can happen on any website.
I am not technical at all and I am at a total loss of where to start with this. I did a bit of research on the internet but no luck in finding any
help.
Basically I am not sure if it is a modem of safari problem. I have no problems when using my HP on without windows explorer on the internet.
I am working wireless ADSL 2 - Bigpond - 2 Wire 2701 HGV-W and a macbook pro purchased around 5 months ago. Since the purchase date
I have had problems with internet.
Safari brings up a page you are not connected to the internet. I then look at the modem and DSL and internet lights are both flickering and or/off.
They then re-set themselves. I then have to re-set preferences on safari and quit and restart.
I have also tried using with cable into mac and modem and no difference.
I can only figure that maybe Safari is not compatible with the modem? could this be the case?
Thanks for reading and any assistance would be appreciated.
FiThere's an Apple help page on the DNS problem - at http://support.apple.com/kb/TS3408
The first thing to try is changing your DNS settings - and for that you need to open System Preferences, then the
Network section.
In Network - click on Advanced - then the DNS tab
under DNS servers - use the + button to enter two extra lines
either these, from google dns
8.8.8.8
8.8.4.4
or from OpenDNS
208.67.222.222
208.67.220.220
then click OK & then 'Apply'
You would need to do that seperately for the Cable (Ethernet) settings and Wireless (Airport) -
Help! Why is my 2011 i7 Macbook Pro so slow?
Greetings, all. First ever post here. A bit long-winded so I apologize in advance.
I have a 2011 15-inch Macbook Pro 8,2 with a 2.2ghz Core i7, upgraded to 16GB Corsair Vengeance ram and a 1TB Seagate fusion hard drive (99GB free space). Running Yosemite 10.10.3. I'm in the beta program but have not installed the 10.10.4 beta software as of yet, so this is a stable release. In theory, this is still a beast even 4 years later - but as of late, I've been having some issues. If it tells you anything, my ORIGINAL 2006 Macbook Pro with a 32-bit Intel Core Duo (not even a Core 2) and 2GB ram seems to outrun it at times.
Startup takes between 3-4 minutes, dashboard widgets take between 45 seconds and a minute to display any information, applications take longer than normal to start, and Safari is having major issues. Safari is virtually unusable about 75% of the time. In fact, I had originally written this post in Safari and it became completely unresponsive when trying to post this. This happens often across all webpages. Many pages do not load period, and when they do, they load very slowly. When they do load, it's hit-or-miss as to how responsive they are. I have submitted this post from Chrome, which works much better, but I really do prefer Safari. Internet speed/router connection is not the issue, as I have other wireless devices that work just fine when this happens.
When performance is suffering, iStat Pro shows a processor load between 5-10%, with 4-6GB of the 16GB of ram being used - so this is obviously not an issue of not having enough processor power or ram, nor did I think it could be but I always check. The computer has been very well taken care of since day one and while it has been used often, it hasn't been used heavily. General use most of the time (web browsing, email, Facetime, word processing, etc). Light photo editing from time to time, and I rarely play games. When I do, it's an older flight simulator that I run on Windows 8.1 through boot camp. Strangely enough, Windows 8.1 runs flawlessly. I occasionally run a virtual machine (Virtualbox) as well. It runs the virtual machine just fine, though the computer does get hot, which is understandable and to be expected - but that brings me to my next point.
It also has periods with major temperature spikes - between 80 and 90 degrees celsius with no change of load or change of computer positioning, it just shoots up. Normally it hangs out between 40-50 degrees celsius. It's at 61 degrees right now and the only applications I have open are Chrome and a PDF in Preview.
I do have Kaspersky Antivirus installed, and it's possible it's partly to blame. However, I don't know how big a resource hog Kaspersky is. I know Norton is bad, but I don't know about Kaspersky.
Other than possibly the Antivirus, does anyone have any idea what could be causing these issues? Is there any maintenance I can/should do, whether it be on the hardware or software side? I'm fairly technologically inclined but I'm at a loss here because I haven't really done anything to my knowledge to cause these issues to happen. Any and all comments are welcome and appreciated.
Sound off.
Thanks in advance!Back up your Mac if you have not done so already. To learn how to use Time Machine read Mac Basics: Time Machine backs up your Mac - Apple Support.
Kaspersky cannot possibly convey any benefit and its presence will only complicate troubleshooting. Uninstall it according to its instructions. This document may help, though it appears woefully outdated: http://support.kaspersky.com/8366. Unfortunately I can't help any more than that. I attempted to install Kaspersky to evaluate it, but the installer repeatedly failed for reasons I was unable to determine.
Determine if the problems also exist in Safe Mode:
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.
Corsair RAM is known to be deficient on Macs, and Google products are notorious for causing Macs to perform poorly.
Maybe you are looking for
-
Sending internal table data to application server as an XML file
Hi All, I am trying to send the internal table data to application server which should be stored in XML format. I am using the following code: DATA: result TYPE xstring. CALL TRANSFORMATION id SOURCE tab = p_output-xsfdata
-
In MIGO ..i require forth tabstrip after General, Vendor, Employee and TEST
Hi, I Require 4th TabStrip in MIGO called Details...there are already 3 tabstrips called (General,Vendor,Employee). I want to impliment through BADI.But i dont knw hw to proceed. I got Defi.Name MB_MIGO_BADI and Method Name s INIT. But i dont knw hw
-
Is there a way to directly watch movies from a NAS without iTunes on Mac
Its not pretty that my iMac must still running while I watch some movies.
-
Q3 2011 Discount Coupons for USA and Canada Certification exams
Hi, Are there any discount coupons available for Q3 2011 SAP Certification Exams. OR when is the next expected date of availability. Pls reply if you know. Edited by: BI Apprentice on Jul 31, 2011 5:41 AM
-
Server 2012 Deduplication causing OneNote 2010 data corruption possibly?
We had a 2008 R2 file server running as VM on 2012 host server. This weekend we converted the underlying VHD to VHDX, then upgraded from 2008 R2 to 2012 and finally enabled deduplication on the volumes. Now it appears that the OneNote table of conte