Help only one usb detected on msi kt3 ultra2 ms 6380e on any version o

i have a problem my specs are here:
MSI KT3Ultra2 MS6380E
Bios Ver. 5.6
Memory 768 Megs Pny ddr Sdram
Sound- On board
harddisk- Maxtor 60 gig ata 133
cd burner 52X24X52 Memorex
when i install any version of windows it dont matter all it does it detect only one of my usb ports i dont know why but it Sux! please help me.

Hi,
Check in the BIOS if all ports are enabled.

Similar Messages

!! Help !! MSI KT3 Ultra2 (MS-6380E) No BIOS Prompt!!

Hi Guys, this may be really elementary to you folks, but I want to change the boot order in bios, so that my Acronis True Image boot disc will be recognized, but when I start my machine, there is NO message about pressing ANYTHING to enter into bios. I've tried delete and esc anyway, to no avail, and I'm about to restart and try F2, but the screens flash past pretty quick, but not too quickly to see that there is NO prompt to enter BIOS at all..... is that expected, problematic??
Can I download a driver or something that will make the "press [ ] to enter setup" or "press [ ] to enter BIOS" prompt appear?
Failing that, is there anyway to force the system into BIOS without a prompt??
My motherboard is MSI KT3 Ultra2 (MS-6380E) and the chipset is VIA VT8367 Apollo KT333, if that helps. I believe that should be all you need to help me out, but tell me if you need anything else, since I have Everest and can probably tell you anything. In fact, I'll just paste all the info on the motherboard right here:
Field   Value
Motherboard Properties
Motherboard Name   MSI KT3 Ultra2 (MS-6380E)
Motherboard ID   62-0911-009999-00101111-040201-VIA_K7$1AARK204_A6380VMS V5.6 091102
Front Side Bus Properties
Real Clock   100 MHz (DDR)
Effective Clock   200 MHz
Bus Width   64-bit
Bus Type   DEC Alpha EV6
Bandwidth   1600 MB/s
Memory Bus Properties
Real Clock   133 MHz (DDR)
Effective Clock   267 MHz
DRAM:FSB Ratio   4:3
Bus Width   64-bit
Bus Type   DDR SDRAM
Bandwidth   [ TRIAL VERSION ] MB/s
Chipset Bus Properties
Real Clock   67 MHz (QDR)
Effective Clock   267 MHz
Bus Width   8-bit
Bus Type   VIA V-Link
Bandwidth   267 MB/s
Motherboard Physical Info
RAM Slots   3 DIMM
Motherboard Size   230 mm x 300 mm
Motherboard Chipset   KT333
Integrated Devices   Audio
Form Factor   ATX
Extra Features   [ TRIAL VERSION ]
Expansion Slots   [ TRIAL VERSION ]
CPU Sockets/Slots   1
Motherboard Manufacturer
Product Information   http://www.msi.com/index.php?func=prodpage1&maincat_no=1
Driver Update   http://driveragent.com?ref=59
Company Name   Micro-Star Int'l Co.,Ltd.
BIOS Upgrades   http://www.esupport.com/biosagent/index.cfm?refererid=40
BIOS Download   http://www.msi.com/index.php?func=downloadindex
ANY HELP you can give me would be GREATLY appreciated folks......
Please help!!

Quote from: Henry on 26-July-09, 10:31:42
Are you using a PS/2 or USB keyboard? If USB try a PS/2 KB. Have you tried rapidly pressing 'Delete' right after power on? By that I mean don't immediately hold it down but press & release multiple times.
Good tip about the ps/2 keyboard, not that I've tried it yet, but I will tomorrow after I get my hands on one, and I'll let you know. Thanks for the tip..... but I wonder, shouldn't it at least TELL me that there exists an option to go into BIOS? Even if it doesn't there must be some way in I guess, so I'll try this tomorrow. Thanks again.....

MOVED: !! Help !! MSI KT3 Ultra2 (MS-6380E) No BIOS Prompt!!

This topic has been moved to Retired motherboards.
https://forum-en.msi.com/index.php?topic=128978.0

Quote from: Henry on 26-July-09, 10:31:42
Are you using a PS/2 or USB keyboard? If USB try a PS/2 KB. Have you tried rapidly pressing 'Delete' right after power on? By that I mean don't immediately hold it down but press & release multiple times.
Good tip about the ps/2 keyboard, not that I've tried it yet, but I will tomorrow after I get my hands on one, and I'll let you know. Thanks for the tip..... but I wonder, shouldn't it at least TELL me that there exists an option to go into BIOS? Even if it doesn't there must be some way in I guess, so I'll try this tomorrow. Thanks again.....

MSI KT3 Ultra2 very low record level 2

i speak spanish, sorry.
well, i have an MSI KT3 Ultra2 MS-6380E, but, the level of record y very low, with diferents michrofone, i know of computer, but i can´t have aceptable record, and when tild MIC BOOST the noise can´t use messenger by my modem transmit every time. I have microfone genius.
your "mic boost option" insert noise?, (with microfone disconected )
¿chasis need ground conected? (i have not conected)
¿the mother is damaged?
¿i need an special michrofone?
¿ is noise of ventilator?
thank you very much
Walter
Argentina
Athlon XP 1800+, 256mb PC2700
MSI KT3 Ultra 2 6380-E AC97 Audio
Maxtor 40gb 7200 Rpm DiamondPlus D740X ata 133 8,5ms
Abit Siluro Geforce 4 MX440, DVD PIONER 16X,
450watt Power Supply

Did you mean you can't record a voice at a audible level ?

KT3 Ultra2 (MS-6380E) and Barton 2600+

Hello,
I have a MSI KT3 Ultra2 (MS-6380E).
I recently changed my CPU from AMD Athlon XP 1600+ (Palonimo, FSB 266) to AMD Athlon XP 2600+ (Barton, FSB 333).
I have the latest BIOS - v5.7.
The new CPU (Barton) appers as 2500+ not 2600+.
I read on MSI website that my mainboard supports CPUs up to 3000+ ...
What should I do ?
PS : The CPU is OK, I tried with another one; and YES - the FSB is set to 166.
Thanks in advance,
OJi.

You know, we've seen this before with Barton XP2600+ on older KT333 and KT400 MSI boards. Is anyone else using a Barton XP2600+ on an older MSI KT333 or KT400?
I purchased some XP2600+ processors almost a year ago (30 units) that I had been told were the older Thoroughbreds, but 27 of them turned out to be XP2600+ Thortons (AXDC2600DKV3C). Due to the enlongated core size and 256KB cache, they were indeed Thortons. However, the markings on the processor made me suspicious as they had Thoroughbred revision/stepping codes.
So I contacted AMD processor support, which initially told me the processors "looked ok" but that they couldn't be certain. That didn't make me any more comfortable, so after a lengthy process I was finally able to get my case referred to AMD Security Group which investigates remarked processors. It took them three months to get back with me, but I did receive a final determination: AMD never made XP2600 based on Thorton, not even for grey market customers. These were remarked processors. There is a thread over on AMD forums about it.
Upon learning of AMD's conclusion, my supplier took them back, explaining their "Asian" source had assured them they were grey market processors. I also know they had a fairly large quantity, and around the same time, news of AMD remarking operation busts in Taiwan were making headlines.
I'm wondering if MSI has confused the Barton XP2600+ for a Thorton? It would seems so, as AMD claims it never produced an XP2600+ Thorton, for anyone.

Help please-USB 2.0 drive only working at USB 1.1 speed (KT3 Ultra2-C, MS-6593)

Help! I have an MSI KT3 Ultra2-C, part no. MS-6593, running WinXP Home. According to the manual it has six USB 2.0 ports, but I can't get a USB 2.0 external hard drive working at USB 2.0 speed. The drive is currently connected using the "D-Bracket 2" which the manual says supports USB 2.0. In my BIOS all USB ports are set to enabled.
The drive was detected by Windows XP, but when it installed I got a warning that it is not connected to a full speed USB port. The drive is only transferring about one megabyte per second of data, which I'm guessing means it's running at USB 1.1. When I use Sisoft Sandra to look at my port information, it lists "Standard Enhanced PCI to USB Host Controller" and then three listings for "Via Rev 5 or Later USB Universal Host Controller". All of my USB devices including the new drive are shown mapped to the "Via Rev 5 or later USB Universal Host Controller" so the "Standard Enhanced PCI to USB Controller" shows no devices connected. Even though all my USB ports are physically filled, they are all mapping to the "Via Rev 5" controller, which I think is a USB 1.1 controller. This makes me think if I can somehow force these devices onto the Standard Enhanced PCI to USB Host Controller, they will work at USB 2.0 speed? How can I make devices use the right USB 2.0 controller instead of the Via USB 1.1 Controller?
Windows Device Manager looks kind of strange, under USB Controllers it first lists the "Standard Enhanced PCI to USB Host Controller". Then it lists my USB cable modem, USB printer, and USB hard drive on the following lines. Then it has several lines that say "USB Root Hub". Then it has three lines that say "Via Rev 5 or later USB Universal Host Controller".
Please help me get this external hard drive running at full speed...I'm stumped and thought this USB stuff was all plug and play, and expected my USB 2.0 drive to work on this USB 2.0 motherboard. Thanks for any responses.

Go Here: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=357&kind=1 and download the Drivers and the Update. Then go into your device manager and click on the host controller of the USB devices and update driver, then select the drivers that you downloaded and restart your computer. once restarted go back into device manager and make sure that what was once "standard host" controller now shows "Enhanced USB 2.0" controller. Hope that helps.

Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
John

Hi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated!

Need help with ATI R9600PRO in MSI KT3 Ultra2

I just got ATI R9600PRO but can't make it work with my KT3 Ultra2 MB, I did up grade Bios, etc but still didn't work , anyone can help?
- AMD XP 2000
- MSI KT3 ULTRA2
- Apacer 256 mb(memory)
- OS Windows XP Pro
- Bios 5.7

Quote from: chiochio on 21-November-05, 20:20:31
When I plugged in ATI R9600 Pro, My monitor was blank. PSU? sorry newbie .
Power Supply details..
try set AGP Vcore to 1.6

MSI KT3 ULTRA2-C and AGP compatibility

Hi, I'm just about to buy a new motherboard these days, MSI KT3 ULTRA2-C, with an XP 2000/2000+ and memory, but not a new video card, since i can't afford it right now. I only have an AGP Creative 3D Blaster Banshee 16 MB, but it is a 3.3v agp card (AGP 1.0). I was wondering if this motherboard can support it, i checked in a lot of places, including the manual and it doesn't say anything about the voltage it can take, neither if the AGP slot is universal or not (i.e. if it can support both 1.5/3.3v or only 1.5v). The manual for the KT3V specifically says '4x 1.5v only', but this one just says 'AGP 2.0 1x/2x/4x'. I really need to know this since otherwise i'd have to wait two months to afford another video card. I also checked another post here with an answer to a page with AGP explanation, but it didn't help. Thanks you very much, really

One AGP slot
- AGP (Accelerated Graphics Port) specification compliant
- Supports AGP 2.0 1x/2x/4x
so whats the problem,your fine there
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=357&MODEL=MS-6593

MSI KT3 ULTRA2-R NO WORK WITH XP 22OO

I have the MSI KT3 ULTRA2-R with the latest bios. MSI states clearly on ther web site that this board will work up to a xp2800. Can anyone tell me why this board will not boot up with anything above an XP2000.
The only thing I can think of is the core volt. this chip needs 1.65 but in the bios it only goes as low as 1.725.
I dont know how MSI can say up to XP2800 ?
Thanks for any info that might help me from jumping of the nearest bridge.

my only thought if it boots a 1700 or the like is lack of power,the vcore is dependant on the cpu installed
or the coolers not up to it

My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!

My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!
I've got an MSI KT3-ULTRA2 mainbord, and I have a NEOLEC VENEZIA TB Cooler. But when I attach my NEOLEC cooler and I start the machine, the machine shuts down within a couple of seconds, and I get nothing to see on my screen. The weird thing is when I turn the PC on, the cooler starts rotating so it can't be broke, but then the pc shuts down i a couple of secs. So pleezze anybody help me!!
The weird thing is that I also have a coolermaster cooler, and that one works fine. But the problem is that this coolermaster is designed for AMD XP 1900+, and I ahve an AMD XP 2200+ that's why I bought the Neolec Venezia TB cooler.
Grtzz
skeleton

one easy thing to watch for... see if the heatsink or fan is in contact with any part of the motherboard, like... if it is too big and touches something that normally wouldn't be in contact with a fan or heatsink. If so, it could be shorting it.

Samsung pc3200+msi kt3 ultra2

will samsung pc3200 ddr memory be compatable with the msi kt3 ultra2? have seen on one site were the extreme pc3200 ddr memory is not compatable with all boards.

They should work.. but as the Ultra2 only officialy support up to 166MHz (333MHz) (PC2700) on the memory it seems like a waste of money.. Unless you plan on overclocking.. I never had problems with Original Samsung memory..

MSI KT3 Ultra2 uses VT8235 with KT333

MSI KT3 Ultra2 uses VT8235 with KT333. Can this be possible and what North/South Bridge Link is used?
VIA site illustrated VT8233(A) with KT333 and VT8235 with olny P4X400. ?(

The standard KT333 southbridge on MSI's KT333 boards is a VT8233A, which already supports ATA-133. USB 2.0 in the southbridge is the real difference. Hope it works as well as the NEC chip, which is rock solid with my USB stuff. Love it.
Regards.....

I am trying to send a friend a group email list from Contact. When it arrives there is only one contact in it. There should be 30! Any ideas?

I am trying to send a friend a group email list from Contact. When it arrives there is only one contact in it. There should be 30! Any ideas?

The procedure for exporting a group is to right-click (or Control-click) on the group in Contacts and select Export Group vCard, then email the resulting file to your friend. Is that what you're doing? If not, give that a try. You can confirm the contents of the file by doing a Quick Look on the file.
Hope this helps.

AGP 1.0 on MSI KT3 Ultra2 (6380)

Can I plug in old AGP 1.0 graphic card (ASUS V3400 TNT) into AGP slot on MSI KT3 Ultra2 (6380) motherboard?

look in agp slot in theory if its not right it should not fit
look at pictures here,notice notches
http://www.msi.com.tw/program/service/forum/index.php?threadid=8317&boardid=10&styleid=1
but as boards not got only use 1.5v warning like some others i think it will

Help only one usb detected on msi kt3 ultra2 ms 6380e on any version o

Similar Messages

Maybe you are looking for