Help~open hub destination file is not open error!

Hi all,
I met a problem, i tried several times and all got error messages.
It is about open hub destination, i want to use it to send some files to sever, but when i execute the DTP, i got system dump:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Runtime Errors         DATASET_NOT_OPEN
Except.                CX_SY_FILE_OPEN_MODE
Date and Time          26.10.2011 01:18:09
Short text
    File "I:\usr\sap\Q26\DVEBMGS11\work\ZSS_O0021.CSV" is not open.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSB_FILE_APPLSRV===========CP" had to
     terminated because it has
    come across a statement that unfortunately cannot be executed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have two open hub, one is fine ,but the rest one always get this error. Help..........

Thanks! I checked my ID and found that i have the role to access this folder.
Then i found that our Q system have two servers, A and B, for open hub i should run my process chain in system B, but i forgot that, so i got error. After i changed to sever B, i re-active my open hub and DTP, then re-fresh the process chain and re-executed it again, the error disappeared.

Similar Messages

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

HELP! Lightroom CC file will not open "edit in" Photoshop CC after upgrade

help! I use Lightroom CC and Photoshop CC and I used to be able to "EDIT IN" and choose Photoshop which would then open up the image in Photoshop. Just updated last night (auto via CC) now it will NOT open in Photoshop...any suggestions! thank you!

Are you using Photoshop CC or Photoshop CC 2014?

Open Hub Destination to Informatica

HI All,
I am having the following issue. We have created Open Hub Destination on InfoCube for Third Party (Informatica). But the target table is not visible in Informatica. They were able to view if created using InfoSpokes and able to extract using InfoSpokes. But when we use Open Hub Destination, they are not able to view them. We verified the RFC connection. Also triggered DTP for Open Hub Destination and it is sending data to the target teable structure.
Please help me in this regard
Regards
YR

Did you use Informatica's SAP Connector? It is a add-on and licese has to be purchased from Informatica. this will help to load delta and continuous daily load from SAP BI to target system with Informatica as ETL. InfoSpoke is a .csv file that created in a particuar folder thus Informatica able to see it.
Thanks,
S

DTP Delta request for open hub destination.

Hi expert,
As you know, In BW 7.0, open hub destination is used for open hub service, and you can create tranformation/DTP for the destination. and in some case the DTP delta is enabled.
my questions are
1) in the context menu of open hub destination, I did not find something like manage, which could list all the DTP request executed for this open hub destination..but for normal infocube or ods, you can find a list.
2) if the DTP could enable the delta, where can I delete the latest delta request, and have a new load..
3) I assume the DTP could be excuted with batch integrated with process chain by process type 'DTP', right ? if the destination type is third party tool, can it also be integrated with process chain ?
4) can give some obvious difference of InfoSpoke and open hub destination in terms of advantage and disadvantage..
Thanks a lot for the feedback.
Best Regards,
Bin

Hi ,
Please look at the links below . hope it helps .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d063282b-937d-2b10-d9ae-9f93a7932403?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9?QuickLink=index&overridelayout=true
Regards
Santosh

To view the data in open hub destination

Hi all,
Can anyone help me out how to check the data in open hub destination file.
These are the details:
Destination: File
Type of file : Logical file
Application Server file name : XXXXXXX
If it was file name, i know it has to be checked in AL11 with directory name and file name.
Here its a logical file name. Which is the directory corresponding to this?
Thanks,
tinkugeo

Hi,
Question: "Are all the logical files are saved in the home directory DIR_HOME?
Please correct me if I am wrong"
Ans: When you create an Open hub destination using Physical file, the file will get created in DIR_HOME directory (by default) in AL11
And for locating the physical path in AL11. Go through the below link. it gives ans to all your ques
http://bx.businessweek.com/sap/view?url=http%3A%2F%2Fweblogs.sdn.sap.com%2Fpub%2Fwlg%2F17370
Edited by: kumkum basu on May 20, 2010 8:20 AM

Unable to delete Open Hub Destination

Hi,
I have created an Open Hub Destination in RSA1-> Modeling-> Open Hub Destination.
However, when i try to delete it, i have this error:
Error while deleting open hub destination
Anyone has any idea how to delete an Open Hub Destination?
Thanks,
CH

Here is the message when deleting DTP with Delta update:-
Delta DTP cannot currently be deleted (see long text)
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.
According to the message, i need to delete all request. How to do that?
Appreciate your help. Thanks.

A Pages file will not open due to index.xml not found, what is up with that?

I recently saved a file on Pages 5.5.2. on my IMac hard drive. Now I find that on attempting to open it the file will not open due to index.xml not found. Hoe do I correct this?

I have this issue, as well - although perhaps in a different content. When I try to open a file I created in the previous version of Pages, I will frequently (but not always), received the "index.xml not found" message. I am very concerned that I may lose access to some of these files. The old Pages icon is still on my dashboard, although I've downloaded the new Pages (that icon only appears when I open a new document). I thought I needed to upgrade the old documents to the new Pages, but this didn't work. Does anyone have any ideas? And, I'm not a techie - so you'll need to break it down for me.

Open Hub Destination with Flat File - Structure file is not correct

Using the new concept for Open Hub destination (NOT an InfoSpoke).
Output is to a Flat File. Remember that when output is to a flat file 2 files are generated: the output file and a structure file (S_<name of output file>.CSV)
The Output file structure corresponds to the structure defined in the Open Hub destination.
However, the S_ (structure) file does not reflect the proper structure. The S_ file lists all fields sorted in alphabetical order based on the field name, instead of listing all fields in the correct order that they appear in the output file.
I have not found any settings that I can modify for the S_ file. When using InfoSpokes the S_ file is correct and I do not have to do anything.
The issue is that the S_ file cannot be used to describe the output file. This is a problem.
Anyone knows a solution to this issue? The goal is to get the S_ file to reflect the proper structure.
I could not find any Notes on this. Please do not send general help links, this is a specific question.
Thank you all for your support.

Hi,
However, the S_ (structure) file does not reflect the proper structure. The S_ file lists all fields sorted in alphabetical order based on the field name, instead of listing all fields in the correct order that they appear in the output file.
As I know and checked this is not the case. The S_ file has the fields in the order of infospoke object sequence ( and in transformation tab, source structure).
I would suggest you to control it again.
Derya

SAP BI 7.0 to SAP PI to FTP and with Open Hub Destination ...Help!!!!

Dear SCN Experts,
I am currently working on scenario where I have a requirement to push data from SAP BI 7.0 to SAP PI 7.
And I am using Client proxy for SAP BI to send the data from BI tables to SAP PI and then to write to FTP address.
Now the challenge I am facing is the ABAP Proxy how to use it with Process Chain and also I am having Open hub destination created for the same.(Specifically with the new version i.e. 7.0)
Can you atleast make me understand what are the steps involved in this for Client Proxy, Process Chaing, How will proxy trigger and other regarding the same.
I have searched SDN but got the document having older versions in it. Which doesn't serve the purpose.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Michal,
Thanks for the reply buddy.
I know that we can run the scheduled report for the proxy to fetch the report. But the client requirement is to use process chain, Open hub destination which fetches data from the ODS to Ztable created.
We need to fetch that data from the table via our proxy. I am familiar with that report related method.
I have one document using the same method but is using Infospoke(which is now obsolete) so have to OHD and also some of the proxy of XI's older version. So is not helping me out.
Please do the needful. Or can you send me some sample scenario like this with screen shots. It will be a great help.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Open hub destination to download the output file into R/3

Hi Guys,
             I have a requirement where i need to down load the data from my BW cube to R/3.For this i am using Open hub destination.
While creating the open hub destination we have option called RFC Destination(in that i have selected destination as my R/3 system).When i execute my DTP it is saying the load is successful and it is showing the no.of records transfered.
But i am not able to find where this data is getting transfered From BW cube to R/3 system using open hub.

Hi Friends,
I have one Query on WDJ. Here I have two requirements.
I have done click on u201CExport Excelu201D Button that data was download into Excel file Now my requirement is click on Save Button that file will save into (/exchange/CED) this path of R/3 System.
CED -
>is R/3 System ID
Under System id we can save this file.
Here EP Server and R/3 Servers in Diff Systems.
I was write codeing
InputStream text =      null;
     int temp = 0;
     try
     File file =      new File(wdContext.currentContextElement().getResource().getResourceName().toString());
//       String File = "abc.xls";
//       String file = "anat" + ".xls";
     wdComponentAPI.getMessageManager().reportSuccess("File::"+file);
     FileOutputStream op =      new FileOutputStream(file);
//       FileOutputStream op = new FileOutputStream("D://usr//sap//BPE//"+file);
//       FileOutputStream op = new FileOutputStream("D://KumarDev-BackUp//"+file);
     wdComponentAPI.getMessageManager().reportSuccess("op::"+op);
     if (wdContext.currentContextElement().getResource()!= null)
     text = wdContext.currentContextElement().getResource().read(false);
     while((temp=text.read())!= -1)
     op.write(temp);
     op.flush();
     op.close();
//        path = file.getAbsolutePath();
     path =      "/exchange/CED/"+file;
     wdComponentAPI.getMessageManager().reportSuccess("path:"+path);
     catch(Exception ex)
          wdComponentAPI.getMessageManager().reportSuccess("ex.printStackTrace()");
My Req is that file will saved in this path (path =      "/exchange/CED/"+file; )
Regards
Vijay Kalluri

Open Hub Destination - csv files

Hi all,
I nedd to send information through Open Hub Destination from a cube to a File in a server. But the Open Hub Destination is originating 2 csv files instead of 1: one of the files has just the name of the fields that will be in the columns and the other file only the data in the columns.
There is an alternative to generate through Open Hub Destination, only one file, with the headers in the columns?
Can you explain to me how to do it?
There are other options to generate csv files, automaticaly from cubes,and send them to other applications?
Thanks a lot.
Regards.
Elisabete Duarte

Hi,
To send information from a cube to applicatin server thru OHS,
two files will be formed while using OHS. One which will be saved inthe aplication server and for other u should give the path. For downloadin the file to the applc server, in the destination tab, select applcn server option and transform it
Hopeit helps
Cheers
Raj
Message was edited by:
Raj

Open Hub Destination Table Vs File

Hello Experts,
We have a requirement to send data from BW to 3rd party system every day. In the Open hub destination we have two options for the target.
1. Table
2. File
ETL tool like Informatica will extract the data from table or file into 3rd party sytem.
Which way is the best in performance and maintenance?
Thanks in advance
Sree

Hi,
If you follow the delta mechanism then table is good. You can also go for File not a problem. See the both eamples in the following articles.
If you use Fiels then go for Application Server option, i.e. AL11 becasue no one can change teh files in this location, you can restrict the authorizations.
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy

Help required for Creation of process chain for Open hub destination(table)

Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet

Help please I can not openening because: Error opening the document, Acrobat can not open the file while printing another document

Help, I ca not opening the file, beacause the mac says Error opening the document, Acrobat can not open the while printing another document

Thank you very much for your replies Taggert_77 & swmtgoet_x :D
Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
The proper cmd is simply: java -jar soht-client-0.6.2.jar
I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
java -client -jar soht-client-0.6.2.jar soht.properties
Thank you again...the mystery remains
PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above).

Help~open hub destination file is not open error!

Similar Messages

Maybe you are looking for