Help, Out of User accounts?!?!

After purchasing 3 Ipod (40gig, shuffle, nano) products (all under the same account name) and now on my second computer, I have used up all of my 5 user licenses.
Recently my PC crashed and needed to be re-built. Now when I try to sync my Ipod to the PC Itunes tells me I am not authorized to play the downloaded songs that I have bought.
Can I do anything? Please help.

If you've reached the limit of 5 authorisations you have the option once a year to deauthorise them all in one go and start over. By the way, this has nothing to do with the number of products you've purchased and registered. The reason for this is that you have a limit of 5 computers on which you can play purchased content: About iTunes Music Store Authorisation and Deauthorisation
If your system crashes or your reinstall your operating system without deauthorising iTunes first, even a single computer can use up your limit of 5 authorisations. See also this article: One computer using multiple iTunes Music Store authorizations

Similar Messages

Ran out of user accounts

hi ive apparntly ran out of user accounts even tho ive de-autherised two computers recently is there any way i can reset my account to be able to use my new computer with my account

If you've reached the limit of 5 authorisations you have the option once a year to deauthorise them all in one go and start over. By the way, this has nothing to do with the number of products you've purchased and registered. The reason for this is that you have a limit of 5 computers on which you can play purchased content: About iTunes Music Store Authorisation and Deauthorisation
If your system crashes or your reinstall your operating system without deauthorising iTunes first, even a single computer can use up your limit of 5 authorisations. See also this article: One computer using multiple iTunes Music Store authorizations

Help please with User Accounts in Windows on X61 Tablet PC

I kept getting the "Blue Screen of Death" and so I decided I would reformat the Hard Disk and reinstall everything. During the installation process, the User "Administrator" and my user account are both on the Welcome screen. Under User accounts, under "Administrator User" it says quote "The administrator account is only visible on the Welcome screen when no other user accounts exist (except the quest account), or when you start your computer in Safe Mode". This still is showing regardless that I have my name as a User and as administrator. Any help on getting this to not show would be great. I have a netbook with Windows XP and it just shows my name as a user and under user accounts just my name and guest. Thanks for the help.
G

You are right, can only have one open. You have to log out of a user before logging in to another user to use iTunes. Do not use the fast user switching ability of Windows.

Need help getting multiple user accounts access an app and its data

Hello All,
We recently got a new iMAC. We set up 3 user accounts in it. Two are admin accounts (one for me and one for my husband). The third is a user account with parental controls turned on (for our kid). Here is the basic setup:
1. Accnt1 - admin
2. Accnt2 - admin
3. Accnt3 - user
Now, I installed the complete national geographic application on the iMAC along with all the data. This is a 6 CD set that took several hours to install. I installed it logged in with Accnt1 (please see above). This installed all the data (150 years worth of data) onto the Documents folder for Accnt1.
The installation was successful and when I launch the application, I can view all the data from Accnt1.
So what is the problem? I tried logging in from Accnt2 and Accnt3. While the applciation is visible and will launch from both those user profiles, no data gets displayed. My guess is that this is because the data from the 6 CD's got installed onto the Documents folder for Accnt1 which is not viewable/accessible from Accnt2 and Accnt3. Therefore, nothing gets displayed.
How do I fix this issue without reinstalling the software so that ALL 3 user accounts on my iMac can access the application AND its data?
My guess is that I will have to provide user permissions/access to the Documents folder for Accnt1 such that both Accnt2 and Accnt3 are read/write. I tried to do that via the Finder and 'More info' operation wherein I click on the tiny lock icon at the bottom of the screen and add Accnt2 and Accnt3 as read/write. But this does not fix the problem for ALL folders further down and I dont want to fix each and every folder.
Is there a quick way to resolve this problem? Can I fix this issue via a terminal window with a command?
Please do help me out.
Thanks in advance
Anonymous76

Move the data folder out of A's documents folder and into /Users/Shared. Then, control-option-command-drag the data folder from its new location back to its original location in A's documents folder. This makes an alias. Log in to the other user accounts and repeat the process for making aliases, to each user's Documents folder.
You might also contact the developer and politely suggest that they learn how to write programs properly for Mac OS X.

MBP won't log out of user account

Hello,-
My MBP won't log out of my user account. It just sits at a white screen with the apple logo. I have to reboot it (several times) to get back
to my user accounts.
I have done a disk repair and it worked fine for 2 days then back to issue.
Any suggestions?

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
While investigating the problem, you may have started the computer in "safe" mode. If possible, these steps should be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. If you can only boot in safe mode, you can still use this procedure, but not all of it will work. Be sure to mention that in your reply, if you haven't already done so.
Below are instructions to enter UNIX shell commands. The commands are safe and do nothing but produce human-readable output, but they must be entered exactly as given in order to work. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. I am not asking you to trust me. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n\n' "$1" "$o"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; { o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; o=$(crontab -l); PR "User cron tasks"; o=$(cat /e*/lau*); PR "Global launchd configuration"; o=$(cat ~/.lau*); PR "Per-user launchd configuration"; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); [[ $o -eq 0 ]] || printf "\nRestricted user files: %s\n\n" $o; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist"); ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; for d in {,/}L*/{La,Priv,Sta}* L*/Fonts; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'error|GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — type only your password. Also remember to post the output.

Need help with network user accounts on Mac server App on Yosemite, any tips?

I've been trying to set up a small network with the Server app on Yosemite. I don't want to do anything crazy with the server, I'd just like to know how I can set up network user accounts so that they can login from other Mac computers on the same network. I already have Open directory set up, the Macs that will be used on the network with the server have already been joined to the server under login options. I have created the network user account, I have also joined the user account to a group that I created. When I try to login to the network account from one of the Macs, it doesn't work. I'm pretty rookie with Mac server, can anyway give me any pointers of what I should be doing? Or if I am doing something wrong. Thanks guys.

The most important step, once you've got Open Directory and DNS set up, with Local Network Users set up in Server.app, is to make sure that all client Macs are using the server's IP address as the primary DNS server in System Preferences > Network, and that they have joined the Network server in System Preferences > Users and Groups > Login Options.
Having said all that, I have just spent hours setting this all up only to find out that Mail doesn't currently work with Network Homes in 10.10.3 / Server.app 4.1.
I will be hoping that Apple recognise the bug, and put out a fix soon.

Sharing Music Help! 2 Users Accounts, 2 iTunes accounts, share SOME music??

Hi - I'm new to Mac and iTunes all together (finally joined the cult... and love it!)
Anyways, My ideal setup is to have 2 User Accounts and 2 Separate iTunes Accounts so my bf and I can buy our own music, obtain separate libraries, yet share SOME music. I want to see all of MY music in the Music Library when I log in, but I still want to be able to transfer some of his music to my phone's playlist and vice versa.
Currently, our Itunes libraries are stored on each of our user profiles /users/name/music. When I log into iTunes, I see my music and [if his user account is logged on] I can see his under SHARED. But that doesn't allow me to transfer his music to my playlists and in the end, my phone.
I read Apple's how-to on pointing each of our iTunes to Users/Shared and but then whenever I'm in iTunes it would just be a huge pool of both our music and I have to weed through all of his.
Any suggestions on how we can both maintain our separate libraries/accounts but share some music (not just listen to each other's music).

In the Finder. I should have said "In the Finder, create the folder /Users/Shared/Music".
In case it wasn't clear, all of the instructions should be carried out in the Finder. iTunes should definitely not be running when you move your library and create the aliases.
A few additional points:
1. There's nothing significant about the folder location /Users/Shared/Music. You can substitute the name of any folder you want, provided all users will be able to read and write to it.
2. Beware of having two or more users accessing your shared Music library *at the same time*. (Since you mentioned you want to share your music between two users on a single MacBook, I assumed only one user would access the library at a time.) This only becomes an issue if at some time in the future you share a library in this way between two computers over a networked drive. If two or more users are making simultaneous changes to the same iTunes library, they will stomp all over each other's changes, and very likely corrupt the library. Note that it's also possible to corrupt your music library if you both are simultaneously logged in on your MacBook via "Fast User Switching", and are both simultaneousy running iTunes and making changes to the library. So don't do that. (Not that you ever would.)

2012 R2 RBA: Remove / Delete buttons greyed out Administrative users account (sec role/scope) clean up

I am seeing something odd with one of my RBA settings. Keep in mind I am seeing this as a 'Full Administrator'.
I created a new test Security scope, Security Role, created a test Active Directory group and then entered that AD group as a new account name under Security>Administrative users. I added the new Security Role under the Security Roles tab of the
Account name (Administrative users) properties and also added the security scope that I created under the Security Scopes tab. I was able to see all the settings I had created/exported in the RBA viewer and everything with the role worked as desired.
I am now looking to clean that up but I don't seem to be able to. I am starting under Administrative Users>Account name and trying to unlink the Security Roles and Security Scopes that listed in those tabs. However, remove and deletes on this
stuff are all greyed out. If I add another role to the Security Role tab I can then remove that, but I cannot remove this 1 particular one. The result is that I cannot remove the custom Security Scope, Security Role and ultimately the Administrative
user.
Does anyone have any idea why I can't remove the security roles and scopes from the Account Name?

I am now looking to clean that up but I don't seem to be able to. I am starting under Administrative Users>Account name and trying to unlink the Security Roles and Security Scopes that listed in those
tabs. However, remove and deletes on this stuff are all greyed out. If I add another role to the Security Role tab I can then remove that, but I cannot remove this 1 particular one. The result is that I cannot remove the custom Security Scope,
Security Role and ultimately the Administrative user.
Does anyone have any idea why I can't remove the security roles and scopes from the Account Name?
I'm able to "delete" one admin user or group (account name) from Administrative users node (\Administration\Overview\Security\Accounts). I tried with custom security role/scope etc....even the same user was part of \Administration\Overview\Security\Accounts.
It seems something wrong with your FULL admin account ? Do you've any other FULL Admin account? If so, can you try with that account?
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Help disabling expired user accounts in AD

I'm looking for a bit of help here... I'm trying to create a vb script that looks for all user accounts that has expired before today and disables them. After a
LOT of scrounging the interwebs I've been able to scraped together the bellow VB script that lists all the expired user accounts that are still active, so now i'm trying to have it take the found
accounts and disable them
Option Explicit
Dim dtmAdjusted, lngSeconds, str64Bit
Dim objShell, lngBiasKey, lngBias, k
Dim objRootDSE, strDNSDomain, objConnection, objRecordset, objUser
Dim strBase, strFilter, strAttributes, strQuery, strDN, strAttributes1, strAttributes2, strAttributes3
' Obtain local Time Zone bias from machine registry.
Set objShell = CreateObject("Wscript.Shell")
lngBiasKey = objShell.RegRead("HKLM\System\CurrentControlSet\Control\" _
& "TimeZoneInformation\ActiveTimeBias")
If UCase(TypeName(lngBiasKey)) = "LONG" Then
lngBias = lngBiasKey
ElseIf UCase(TypeName(lngBiasKey)) = "VARIANT()" Then
lngBias = 0
For k = 0 To UBound(lngBiasKey)
lngBias = lngBias + (lngBiasKey(k) * 256^k)
Next
End If
' Convert current date/time value to UTC.
dtmAdjusted = DateAdd("n", lngBias, Now)
' Find number of seconds since 1/1/1601.
lngSeconds = DateDiff("s", #1/1/1601#, dtmAdjusted)
' Convert the number of seconds to a string
' and convert to 100-nanosecond intervals.
str64Bit = CStr(lngSeconds) & "0000000"
' Determine DNS domain name.
Set objRootDSE = GetObject("LDAP://RootDSE")
strDNSDomain = objRootDSE.Get("defaultNamingContext")
' Use ADO to search Active Directory.
Set objConnection = CreateObject("ADODB.Connection")
objConnection.Provider = "ADsDSOObject"
objConnection.Open "Active Directory Provider"
Set objRecordset = CreateObject("ADODB.Recordset")
objRecordset.ActiveConnection = objConnection
' Search entire domain.
strBase = "<LDAP://dc=globalgiving,dc=local>"
' Filter on expired user accounts.
strFilter = "(&(objectCategory=person)(objectClass=user)" _
& "(accountExpires<=" & str64Bit & ")(!accountExpires=0)(!userAccountControl:1.2.840.113556.1.4.803:=2))"
' Retrieve Distinguished Names.
strAttributes = "sAMAccountName"
' Use ADO to query AD.
strQuery = strBase & ";" & strFilter & ";" & strAttributes & ";subtree"
objRecordset.Source = strQuery
objRecordset.Open
' Enumerate expired user accounts.
Do Until objRecordSet.EOF
strDN = objRecordSet.Fields("sAMAccountName")
Wscript.Echo strDN
objRecordSet.MoveNext
Loop
' Clean up.
objRecordset.Close
objConnection.Close
Set objRootDSE = Nothing
Set objConnection = Nothing
Set objRecordSet = Nothing
I tried adding:
strDN.AccountDisabled = True
strDN.SetInfo
but I get :
(66, 1) Microsoft VBScript runtime error: Object required: 'jtest'
jtest is one of the test accounts I have on my AD.
Any suggestions or pointers anyone can give me? I found a 4 line power script that dose exactly what i want, but power script isn't an option for me :(

Start with this:
'change this
' Retrieve aDS path to user object
strAttributes = "aDSPath,sAMAccountName"
' Enumerate expired user accounts.
Do Until objRecordSet.EOF
Set account = GetObject(objRecordSet.Fields("aDSPath"))
Wscript.Echo account.SamAccountName
account.AccountDisabled = True
account.SetInfo
objRecordSet.MoveNext
Loop
¯\_(ツ)_/¯

Java SE Ver 7 Uxx locking out domain user account failing Kerberos PreAuth

Java SE Ver 7 all updates are failing Kerberos Pre_Auth and locking domain user accounts because of truncated UDP packets.
When a user opens a page that uses JavaScript their domain account gets a bad password, subsequent openings in the lockout threshold window (5 in 30 minutes for us) results in a domain account lockout.
I have done extensive troubleshooting of this issue and have root caused and been able to prevent it with a less desirable solution. Oracle fixes for the bug below (basically same issue) do not work for me or i'm implementing them incorrectly.
This effects XP\Win7 (32Bit browsers with IE 8 and 9).
Java SE Ver 7 U21 and lesser updates are failing Kerberos Pre_Auth (KRB5KDC_ERR_PREAUTH_FAILED)due to the use of UDP instead of TCP. Starting with the SRV request, UDP exceeds MTU and gets truncated enroute to the KDC. This results in the eventual response from the KDC as bad credential and eventual account lockout if user repeats call for Java.
We have been able to force TCP by blocking UDP 88 on a test station's windows firewall. This prevents the bad password, but injects a delay while kerberos times out UDP and fails to TCP.
Java BUG 8009875 lists the "udp_preference_limit=1" value that forces Java to use TCP, but i can't get this working with a KRB5.config or KRB5.ini file in the c:\windows directory. Even utilizing an environment variable KRB5_CONFIG does not work.
Our expected result is to force Java 7 to use TCP for Kerberos transactions and not UDP. This will be a stop gap until the release of Version 8 next year, which BUG 8009875 says corrects the default UDP call to TCP.

I had this same issue. My fix was to create a custom jass config file that specific to not use the local tgt cache.
If you would like I could provide you with this setup. 1.7 uses GSS/SPNEGO as the first method of auth, this will essentially disable this method of single-sign on.
Http Authentication
GSS/SPNEGO -> Digest -> NTLM -> Basic
It looks like you got a fix so this post could be worthless

How an Admin user log into a lock out standard user account?

I remember that I was able to override the access to the standard account user when the standard user has the screen lock out. This appear to be missing in Lion. Has anyone knows how to do this in Lion? Thanks.

From my personal experience I can say that at times, four folders (i guess Assets is one of them) somehow get left in C:\Program Files (x86)\Adobe\Elements 11 Organizer folder.
I delete them and restart my system.. and reinstallation works fine. If that's the case with you, you can try it.
CS Cleaner tool might also help.
Thanks
Andaleeb

When logging out of user account iMac will not start back up at login screen.

To prevent guests from using my iMac I frequently "log out" and created a guest account. However when I log out and shut down, my iMac turns on
right back to my desktop not even returning to the "log-in" screen. I tried fixing this under preferences but this did not yield any help as it's still doing
this? I don't understand I can't recall ever having this problem before. Please help! Thanks

Try rebooting into Safe Mode, this will clear some caches. It is possible one (or more) is corrupt. To reboot in Safe Model when you hear the startup tone hold down the Shift Key until you see a progress bar appearing.

Help needed - moved user accounts

I did an upgrade install on my Dual G5 today, but Leopard doesn't know where my users' files are located. I have a very fast (but smaller) HDD for the OS, and moved my user files to a larger HDD. The links were not carried over in the upgrade/install.
I believe it was a post from Kappy that helped me in moving my user folders initially. Can anyone help me with the needed command line entries needed so that Leopard knows to look to the other HDD for my users?
Thanks-Gary

If you've reached the limit of 5 authorisations you have the option once a year to deauthorise them all in one go and start over. By the way, this has nothing to do with the number of products you've purchased and registered. The reason for this is that you have a limit of 5 computers on which you can play purchased content: About iTunes Music Store Authorisation and Deauthorisation
If your system crashes or your reinstall your operating system without deauthorising iTunes first, even a single computer can use up your limit of 5 authorisations. See also this article: One computer using multiple iTunes Music Store authorizations

Find out what user accounts are tied to

Spicework Team,Wanted to know some thoughts on when an employee leaves the company. We have a employee termination sheet that we go through when someone leaves the company. My question is we recently had somebody from our IT department leave who has been here 14 years, so of course there are many more things added to that termination sheet that need to be addressed. I have been making an entirely different sheet up if they are a member of the IT department. I have gotten just about everything we can think of, but the one question I have is there an easy way to see if an admin account is being used for authentication etc? My issue is we have to change the domain admin account now, and I have been going through some of our servers (SharePoint being one of them) and sorting the services by log on and found a bunch of services that are...

Dropbox for Business customers are big sharers. But while using Dropbox to share your files is easy, collecting files from other people can be more difficult. So today, we’re excited to introduce a new way for Dropbox for Business users to get the files they need: file requests.File requests are a fast and easy way to collect files — large or small — from partners, clients, vendors, and anyone else you work with. Here are just a few people we had in mind when we built file requests for our Dropbox for Business customers:Teachers and professorsneeding a way to easily collect papers from dozens of studentsAssistants and coordinatorsspending a lot of time gathering receipts and invoicesEvent plannersrequesting assets and contracts up until the day of an eventReal estate agentsgathering hundreds of applications for new propertiesIf any of...

Need help changing Limited User Accounts

Have 100+ ibooks from 500 mhz to 1.2 mhz with ARD 2.2 client checked out to individual students. Eacher comptuer has a Limited account called student with the computer renamed to the actual student. I forgot to deselect the DVD player on my image. Is there a way I can use my ARD administrator software to send a script to deselect the DVD player from the student account?

Never mind I took care of it with: rm -r /applications/dvd\ player.app

Help, Out of User accounts?!?!

Similar Messages

Maybe you are looking for