Help! Outputting 24fps timeline to Digibeta for 1 hr show

Hello
We are looking to assemble to tape, a show cut with a timeline of 23.98 and making certain that the program times out to EXACTLY one hour for network broadcast. As we are assembling to digital betacam for the downconverted version, it appears that the exact 1 hour program is now 1:00:03:22 when outputting to DF, NTSC. Any ideas as to what may be happening that the show is extended by 3+ seconds? We greatly appreciate any help as our deadline of course, is yesterday!
Nemo

NDF timing is different that DF timing. Because video runs at 29.97fps and not 30fps, it runs slightly SLOWER....so to make up for this, DF code was invented. To ensure proper accurate timing.
Now...23.98 timelines do not have DF code, they only have NDF code. So you need to figure out the difference in timing.
http://lfhd.blogspot.com/2006/09/online-workflow-overview.html
Shane

Similar Messages

Setup for iPhone 4 shows google browser when I touch safari. Help to change to safari., Setup for iPhone 4 shows google browser when I touch safari. Help to change to safari.

I was setting up my pop's new iPhone 4. When I was setting up the Safari Browser, it asked what I thought was which search engine I wanted to use, so I entered Google. Problem is that I somehow made the Safari Browser open up into a Google Browser. I love Safari & can't find how to switch it back to a Safari Browser when I touch the Safari App on Pop's iPhone. Looked in settings & couldn't find how to correct my mistake. Help please.

Google doesn't, to the best of my knowledge, even make a browser for iOS. Even if they did, you would have had to have downloaded it from the App Store. And, even if you had downloaded an alternate browser (there are quite a few), they wouldn't launch if you tapped the Safari icon.
What, exactly, do you mean when you say "Google browser"? What are you seeing?

Smpte counting meter for 24fps timeline

I am in urgent need of a smpte counting meter for 24fps timeline. Pls help. I need the 2 second beep for my sound mix. I know that I can get the count down when I burn to tape, but I need it built into the timeline. ANy suggestions? Or websites where I can find a free download.

Do a quick search of your computer for "Head Leaders for Cinema Tools" and you'll find a folder full of them.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

Hi
frodojon wrote:
I either didn't do the correct mapping sequence before or I'm starting to wonder if it has something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.
All this sounds like you are confused about the general nature of MIDI Continuous Controllers (MIDI CC). The MIDI specification allows for 128 different CC's: CC0 to CC127. Some are typically "preallocated" to 'standard functions: CC1= Modulation, CC7=Volume, CC10+Pan, CC11= 'Expression'. Some act as switches such as 'Sustain' CC64.
frodojon wrote:
Everything appears to be scaled from -63 to +64 if that's what you mean by scaling? What do you mean by MIDI CC7?
Mainstage works with MIDI CC's generally in a number of ways:
Some standard ones are automatically passed through to all MIDI/Instrument channels unless you specifically block them. Others are not passed through unless you specifically map them to something.
This mapping can be done basically two ways (with MS 2.2):
a) Make a Screen Control in Layout mode, and assign it to a particular incoming MIDI CC message. Then, you can map this Screeen Control to a variety of parameters such as the volume of a particular channel strip.
b) With MS 2.2, you can do the above Assign and Mapping directly, without the need for Screen Controls as an 'intermediary'.
frodojon wrote:
something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel. I
Yes.
It sounds to me like you have an issue where you have several hardware controls on your Keyboard set up to transmit the same MIDI CC. This is probably not a good idea, and it would be much better if you assigned them to transmit different CC messages (CC1 for Modulation and probably CC11 for the Expression (though you may want to set the pedal to some other number instead.
Once you are transmitting different CC messages, you will be able to Assign and Map much more flexibly:
for example, you could one to control the overall output volume at Concert Level in MS, whilst the other controls the volume of a specific channel within a Patch.
Your issue of layered patches is one of "Scaling": one Screen Control (assigned to an incoming MIDI CC message) needs to alter the ranges of different channel strips to different amounts. You can set this up by using multiple mappings for one Control, each set to work over a particular range (for example a goes from -20 to 0 whilst b goes from -30 to -20 etc.).
hth
CCT

Help to estimate timeline for Stellent UCM & DAM project

Hi,
To answer a customer RFP on Stellent UCM & DAM project
i urgently need to estimate timeline to do similar project.
Is there any experienced consultant Oracle Stellent person to contact
or documents regarding UCM & DAM project already done
or Gantt chart examples illustrating the main phases with duration of different phase of project implementing UCM & DAM (planning, design, implementation, testing, deployment, accompaniment) ?
Great thanks for any help.

I am seeking and searching for an Oracle/Stellent consultant who can guide me on much the same thing
1) Responding to RFPs
2) Implementation Services
3) Stellent Support
How can I get intouch with Joe Golemba
Thanks much
Elena
Did you get help with this? If not, contact Joe
Golemba with Oracle ECM Consulting for helps. Most
of his team came from Stellent consulting and they
have experience with these kinds of projects. May be
able to share materials or at least battle stories
(especially over beer).
cheers

911: Output to Digibetta for Dummies?!

Hi,
My boss is insisting that i learn how to lay off my HD fcp timeline to digibeta by the end of the day today.
Can someone please take my hand and walk me through, step by step, what i need to do...both in FCP and with all of my connections. We are using a Kona Card.
Thank you SO much!

See...this is why you need one-on-one tutoring. I thing what Tall did was great, and above and beyond, but your questions show a lack of very basic knowledge of editing video...and without that, I can't see how one could expect to know how to deal with high end video formats.
DF/NDF. DROP FRAME and NON-DROP FRAME...timecode.
Stripe the tape past where bars start...meaning record a black video signal and timecode up to about 00:59:00:00...because bars and tone typically start at 58:30:00, and you will be doing an Assemble Edit so all you need is that much of the tape striped with code.
Patch 422...that is deck control.
And there is NO WAY that we can say on the boards how the actual deck works...what do to and what menu does what. I guess there is, but that will be a lot of typing, and visuals will be needed.
Dude...you need on had help...you need to get taught in person how this works. I have no doubt that what Tall said contained a lot of jargon that was intended to see how much you really know. And it is apparent that you don't know that much. No offence...when I first saw a digibeta deck I was intimidated. It is a complex beast. And it took a few tutorings from other editors to know how to do things.
Get actual in person help.
Shane

Page Design Options for Microsoft HTML Help Output?

Hello, I am new to RoboHelp. I am almost done designing my first RoboHelp project (which has an MS HTML Help output). I see from my documentation that skins can only be applied to Webhelp or Flashhelp. However, i would like my help output to have a custom look. Is there a tool or method I can use to customize the look of my MS HTML Help?

I'm tempted to say "Yes. Use WebHelp" but there is also AirHelp to consider. You may want to check out this link.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

OutPut as a PDF doc for Output Determination process of a PO

Hi
Can I get the OutPut as a PDF document for OutPut Determination process of a PO for a Vendor.
My schema should produce a PDF file and get transmitted to that Vendor as soon i save my PO.
Also can i get any SAP document on this.
Pls help me. Swifty reply me.
cheers
MaruthiRam

Hi,
PO can be sent to using Outlook email or the Internal send within SAP.
Message via E-Mail
Use
You can send purchasing documents to a vendor by e-mail.
You can also send memos to an internal user from within the purchasing document, in which case the recipient can directly access the relevant document when processing the e-mail (executable mail).
Prerequisites
External Transmission
Make the necessary Customizing settings
The SAP system is configured for the transmission of external mails.
The message determination facility has been set up in Customizing for Purchasing.
You have defined a communication strategy in Customizing under Messages Output Control -> Message Types -> Define Message Types for <Purchasing Document> -> Maintain Message Types for <Purchasing Document> on the Default Values tab page, so that if no e-mail address can be found, for example, the system sends a fax.
The following information is necessary:
1.Data
2.Value
3.Comment
Message type:
Communication strategy
E.g. NEU
Choose a communication strategy or create a new one. Via the input help, you can branch to the maintenance function for communication strategies. Choose in the following window.
Enter the necessary data on the Default Values tab page on the detail screen for the message type ().
Processing routines
Medium
Program
FORM routine
5 (external transmission)
SAPF06P (e.g. for PO)
ENTRY_NEU
The entries are identical to those of the print output.
Partner roles
E.g. external transmission/LF
Maintain master data
Message records must have been created through master data maintenance (Purchasing menu). (See Creating Message Records)
Enter the necessary data u2013 for example, role LF (vendor), medium 5 (external transmission) and time spot 4 (send immediately upon saving).
SAP recommends that you work with time spot 4, so that the e-mails generated are sent immediately.
If you work with processing time spot 1 (send via periodically scheduled job), you must schedule the program RSNAST00 periodically for message output, so that messages are generated and e-mails sent.
An e-mail address is stored in the vendor master record.
An e-mail address is stored in the user master record.
Please note that you must also maintain an e-mail address for user IDs with which batch-jobs are carried out.
Internal Transmission
Make the necessary Customizing settings:
You have maintained the Customizing settings for Purchasing under Messages, Output Control -> Message Types ->Define Message Types for <Purchasing Document> -> Maintain Message Types for <Purchasing Document>.
The following information is necessary:
1.Data
2.Value
3.Comment
Message type:
Time-spot
Transmission medium (output medium)
Partner role
E.g. MAIL
E.g. 4 (send immediately upon saving)
7 (SAPoffice)
MP (mail partner)
Enter the necessary data on the Default Values tab page on the detail screen for the message type ().
Mail title and texts
E.g. mail from purchase order
Processing routines
Medium
Program
FORM routine
7 (SAPoffice)
RSNASTSO
SAPOFFICE_AUFRUF
Partner roles
E.g. SAPoffice/MP
SAPoffice/LF
Maintain master data
Message records must have been created for the message type MAIL through master data maintenance (Purchasing menu). (See Creating Message Records)
For more information on the internal and external transmission of e-mails, refer to the Basis documentation under Business Workplace (BC-SRV-GBT).
Further information on external transmission is available in the Basis documentation under SAPconnect and in the section External Sending in the SAP System.
Activities
External Transmission
If you have specified the processing time-spot 4 (send immediately upon saving), the system will immediately generate and transmit a message when you save the purchasing document.
If you have specified the processing time-spot 1 (send via periodically scheduled job), you must initiate the output of e-mails manually.
Result
You see the documents generated in the SAP system under Office ->Work center -> Outbox -> Documents.
Internal Transmission
On the message screen of the Purchasing application (e.g. in the purchase order), enter the message type, the medium (SAPoffice) and the role (MP = mail partner).
Choose Means of communication and enter your text on the following screen (<Purchasing document>: Send with note). Enter the useru2019s first and last names, for example, in the Recipient field.
Executable mail
If you wish to insert a transaction (because you want the recipient to view a purchase order, for example), choose Goto -> Execution parameters. Enter the necessary data, such as execution type (T = transaction), execution element (ME22N = Change Purchase Order), execution system, and the SET/GET parameters (BES for purchase order).
Result
If you have specified send immediately as the processing time-spot, the user will immediately receive a message or document when the purchase order is saved.
The user can view the message sent to him or her via Office -> Work center -> Inbox.
If the document in your inbox is an executable mail, you can click the right-hand mouse button and directly access the relevant purchase order, for example, via the menu thus displayed.
Hope it works...
Regards,
Kiran

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

Output determination and Printer determination for both PO and GR

Dear all,
Can anyone please help me in congiguring the output determination and printer determination for both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration.
Thanks & Warm Regards
Somashekar Anand

hi Somashekar
follow he steps
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Reward points if helpful
Thanks and regards
Ravikant Dewangan

Update Adobe AIR help content without necessity of installation for users???

Hello there,
I want to make our manuals available as Adobe AIR help applications. Unfortunately for our users it is not possible to regularly install these applications. Therefore I decided to generate a help viewer as AIR file and help content as RHA file ("help content only" ssl option). So admins only once have to install an initial AIR file. Afterwards users are able to replace help content to update help files.
I proceeded in a similar way as described here:
http://blogs.adobe.com/techcomm/2010/07/merging_multiple_helps_in_air_help_output.html
In principle this is a good solution - but here is my problem:
Help content itself already consists of different projects (merged projects). Merged projects unfortunately cannot be generated with "help content only" ssl option.
Anyone has got an idea how to satisfy all my conditions:
- Customers only once have to install an AIR file
- Afterwards help content can be updated by replacing files (without installation)
- Help content itself contains merged projects .
Generate different outputs (RHA files) for the merged projects is not a possibility. The merged projects with regard to content belong to ONE single manual - I'm not talking about different manuals. So users should be able to search the whole manual and so on ...).
Thank you so much in anticipation!
Melanie

It has always irritated me that the blog you refer to uses the term "merged help". It is not merged help, it is simply a collection of outputs where the user can select the one they want.
My site does have instructions for a true merged AIR Help output but that will not achieve your objective of one install. Sorry but I don't think what you want can be achieved.
http://www.grainge.org/pages/authoring/merging_webhelp/merging_method_rh9.htm#air
The method is the same for Rh10.
Please feel free to use the Contact page on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Is there a minimum width to Adobe AIR Help output?

Good day!
I am trying to produce an Adobe AIR Help document which is 256x768 pixels in size; this document is to be displayed on the left of the screen and use only a quarter of the Desktop real estate.
When I produce an Adobe AIR Help file using these dimensions, the document is always too wide. Furthermore, I cannot manually adjust it to be more narrow.
I would like to produce a Help document which is similar to Adobe's "Self Test Drive" environment for customer prospects to experience Adobe product. My company is doing a very similar project.
Why is it that Adobe AIR Help output doesn't export at this size? Furthermore, are there any adjustments to any files I can make to allow this?
Thank you for your help, in advance! Have a great day!
Most sincerely,
Sammy Spencer

For this situation the plugin https://chrome.google.com/webstore/detail/user-agent-switcher-for-c/djflhoibgkdhkhhcedjikl pkjnoahfmg for Chrome may help. You can set the user agent to fool the HTML5 browser detection.
Greet,
Willam

Help needed with a PS script for network share documentation

I found a nice PS script that will do what I want, however the output portion seems to be broken. It will output the permissions and details, but not list what share it is referring to... Can anyone help with this?
Thanks!
https://gallery.technet.microsoft.com/scriptcenter/List-Share-Permissions-83f8c419#content
<#
           .SYNOPSIS
           This script will list all shares on a computer, and list all the share permissions for each share.
           .DESCRIPTION
           The script will take a list all shares on a local or remote computer.
           .PARAMETER Computer
           Specifies the computer or array of computers to process
           .INPUTS
           Get-SharePermissions accepts pipeline of computer name(s)
           .OUTPUTS
           Produces an array object for each share found.
           .EXAMPLE
           C:\PS> .\Get-SharePermissions # Operates against local computer.
           .EXAMPLE
           C:\PS> 'computerName' | .\Get-SharePermissions
           .EXAMPLE
           C:\PS> Get-Content 'computerlist.txt' | .\Get-SharePermissions | Out-File 'SharePermissions.txt'
           .EXAMPLE
           Get-Help .\Get-SharePermissions -Full
#>
# Written by BigTeddy November 15, 2011
# Last updated 9 September 2012
# Ver. 2.0
# Thanks to Michal Gajda for input with the ACE handling.
[cmdletbinding()]
param([Parameter(ValueFromPipeline=$True,
    ValueFromPipelineByPropertyName=$True)]$Computer = '.')
$shares = gwmi -Class win32_share -ComputerName $computer | select -ExpandProperty Name
foreach ($share in $shares) {
    $acl = $null
    Write-Host $share -ForegroundColor Green
    Write-Host $('-' * $share.Length) -ForegroundColor Green
    $objShareSec = Get-WMIObject -Class Win32_LogicalShareSecuritySetting -Filter "name='$Share'"  -ComputerName $computer
    try {
        $SD = $objShareSec.GetSecurityDescriptor().Descriptor
        foreach($ace in $SD.DACL){
            $UserName = $ace.Trustee.Name
            If ($ace.Trustee.Domain -ne $Null) {$UserName = "$($ace.Trustee.Domain)\$UserName"}
            If ($ace.Trustee.Name -eq $Null) {$UserName = $ace.Trustee.SIDString }
            [Array]$ACL += New-Object Security.AccessControl.FileSystemAccessRule($UserName, $ace.AccessMask, $ace.AceType)
            } #end foreach ACE
        } # end try
    catch
        { Write-Host "Unable to obtain permissions for $share" }
    $ACL
    Write-Host $('=' * 50)
    } # end foreach $share
This is what the output looks like when ran with 'RemoteServer' | .\Get-SharePermissions.ps1 | Out-File 'sharepermissions.xls'
FileSystemRights : Modify, Synchronize
AccessControlType : Allow
IdentityReference : Everyone
IsInherited : False
InheritanceFlags : None
PropagationFlags : None

Actually it is not being written only with Write-Host. The last line of the loop is this "$ACL" which ius an array of objects.
Here is a version that gets the info more easily and produces flexible objects. It should be easier to modify into what is needed.
# Get-ShareSec.ps1
[cmdletbinding()]
param(
[Alias('ComputerName')]
[Parameter(
ValueFromPipelineByPropertyName=$True
)]$Name=$env:COMPUTERNAME
Process {
Write-Verbose "Computer=$name"
$shares =Get-WMiObject Win32_Share -ComputerName $name -Filter 'Type=0' -ea 0
foreach($share in $shares){
$sharename=$share.Name
Write-Verbose "`tShareName=$sharename"
$ShareSec = Get-WMIObject -Class Win32_LogicalShareSecuritySetting -Filter "name='$ShareName'" -ComputerName $name
try {
foreach ($ace in $ShareSec.GetSecurityDescriptor().Descriptor.DACL) {
$props=[ordered]@{
ComputerName=$name
ShareName=$sharename
TrusteeName=$ace.Trustee.Name
TrusteeDomain=$ace.Trustee.Domain
TrusteeSID=$ace.Trustee.SIDString
New-Object PsObject -Property $props
catch {
Write-Warning ('{0} | {1} | {2}' -f $Computer,$sharename, $_)
Get-Adcomputer -Filter * | .\Get-ShareSec.ps1 -v
¯\_(ツ)_/¯

Regarding callfunction for output device without a prompt for printer name.

Hi,
Is there any call function, for accessing output device, without a prompt for printer name? Can we directly execute the smart form without print popup?
Can anyone suggest me in this regard.
Thanks in advance,
Shwetha Korlepara.

Hi,
Check my code and reward points by clicking the star on the left of reply,if it helps.
*& Report ZZZ_JAYTEST1                                                *
REPORT zzz_jaytest1 NO STANDARD PAGE HEADING MESSAGE-ID zhrt.
Variable Declaration
DATA : v_form_name TYPE rs38l_fnam,
       itab TYPE STANDARD TABLE OF pa0001,
       w_ctrlop TYPE ssfctrlop,
      w_compop TYPE ssfcompop,
      w_return TYPE ssfcrescl.
SELECT * FROM pa0001 INTO TABLE itab UP TO 5 ROWS.
SORT itab BY pernr.
DELETE ADJACENT DUPLICATES FROM itab COMPARING pernr.
DATA: control TYPE ssfctrlop,
control_parameters TYPE ssfctrlop,
output_options type SSFCOMPOP.
control-preview = 'X'.
control-no_open = 'X'.
control-no_close = 'X'.
control-no_dialog = 'X'.
control-device = 'PRINTER'.
output_options-tddest = 'LOCL'.
OUTPUT_OPTIONS-TDNOPRINT = 'X'.
OUTPUT_OPTIONS-BCS_LANGU = SY-LANGU.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
   USER_SETTINGS            = ' '
   OUTPUT_OPTIONS           = output_options
   CONTROL_PARAMETERS       = control
EXCEPTIONS
   FORMATTING_ERROR         = 1
   INTERNAL_ERROR           = 2
   SEND_ERROR               = 3
   USER_CANCELED            = 4
   OTHERS                   = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
output_options-tddest = 'LOCL'.
OUTPUT_OPTIONS-TDNOPRINT = 'X'.
OUTPUT_OPTIONS-BCS_LANGU = SY-LANGU.
CALL FUNCTION '/1BCDWB/SF00000066'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = control
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = output_options
   USER_SETTINGS              = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            = w_return
JOB_OUTPUT_OPTIONS         =
TABLES
    itab                       = itab
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SSF_CLOSE'.

Help! Outputting 24fps timeline to Digibeta for 1 hr show

Similar Messages

Maybe you are looking for