Help outputting using Panasonic AJ-SD955 / Blackmagic Decklink Extreme

Hello to all,
Anyone out there able to walk me through connecting and outputting to a Panasonic AJ-SD955 and getting a reference signal? I am using a Decklink Blackmagic Extreme Card and FCP 5.0.4. I've been capturing all night, literally , from the deck, but am unable to Edit To Tape/output. I need to black and code a tape and output with picture starting at hour 1. I do not seem to be getting picture or reference to the deck.
Picture shows up on my monitor when playing straight from the timeline when viewing via the Blackmagic card.
When I park on the timeline and push the record button on the deck and view via the deck, I have picture on my broadcast monitor.
The picture is jumping every few seconds, hence my thinking that I am not getting reference.
On the front of the deck the SDI light and Analog video are lit up. They are not flashing.
When I tried black and coding the tape timecode laid to the tape but no black.
When I try Edit To Tape nothing is going to the tape.
From the Blackmagic Card to the deck the connections are the following:
(14) Genlock is going into the top Ref. Video In -- The 75 termination switch is on.
Analog Composite Video Out is going to line B on my Sony monitor and provides the picture from the deck.
(16) Deck Control to Remote IN/OUT.
(13) SDI out to SDI IN on deck (top port)
(15) SDI in to SDI out on deck (top port)
If you need any other information please let me know. I am posting in several places in an effort to get an answer fast, because what would life be without deadlines? LOL!
As always, thanks in advanced!
Peace,
Lisha
www.badamitv.com

Awesome - the Out Ref fix did it!
When I did the edit to tape I tried both insert editing and assemble editing - both ended up the same.
On a side discussion - how do you sync the FCP machine with the black burst generator? I'm still a bit new to this - what exactly does the genlock do on the Decklink Extreme card? Is this where I sync with the black burst?
I assume the digibeta deck will also get synced with the same black burst generator. Does this go into the reference input on the back?
Thanks for your help,
-Grant

Similar Messages

Understanding the way to connect a MDD to BlackMagic Decklink Extreme card

Hi,
I require some help in the following:
I recently bought myself a Blackmagic DeckLink Extreme™ with 10bit SDI/analog video and audio capture card.
Looking at the specs, http://www.blackmagic-design.com/products/sd/specs/, can someone give me directions as to the best setup I can do from the following sources and what other equipment I may require to achieve it.
- mono stereo audio VHS -> has 1 video/audio in and 1 video/audio out (composite connections)
- stereo audio video camera -> has 1 8 pin S-Video out port to composite connections (Hi8 tape type)
- DVD player -> has composite 2 x 2ch stereo audio out, 1 x 5.1ch stereo audio out, 2 x video out, 1x component video out, 2 x S-video out, 2 x digital audio out; 1 x RCA/OPT
- 2 x 23" monitors connected by ADC and DVI connections to a Apple MDD G4, may relay to 60" Plasma for video monitoring from video card prior to creating DVD final piece for playback.
Basically, I wanted to have multiple source inputs and outputs, but I'm having difficulty in understanding the setup. Please refer to http://www.blackmagic-design.com/downloads/connections/decklinkdiagram.pdf page 5/6.
I purchased the following from JayCar
- 6 x PA3655 ADPT PLG RCA:
https://secure4.vivid-design.com.au/jaycar2005/productView.asp?ID=PA3655&CATID=& keywords=PA3655&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumb er=&priceMin=&priceMax=&SUBCATID=
- 1 x AC1668 SWITCH AV 3WAY:
https://secure4.vivid-design.com.au/jaycar2005/productView.asp?ID=AC1668&CATID=& keywords=AC1668&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumb er=&priceMin=&priceMax=&SUBCATID=
What other devices do I need to set up the equipment in the following way:
<pre>
Computer ------- Video In + Stereo In -----------> 3WAY SWITCH BOARD
| | ^ ^ ^
| | | | |
Bigpond |---- OUT ---> TV --------|-----|-----|
(Satellite Internet) | | | |
FOXTEL DVD VCR V/CAM
(Satellite TV)
</pre>
Currently I have not succeeded.
I have just done a simple test like so:
<pre>
Computer ------- Video In + Stereo In ---------> DVD (*)
|
Bigpond
</pre>
(*) Tested using the following:
<pre>
From Decklink -- Y IN (from deck) --> DVD Y port
-- B-Y IN (from deck) --> DVD Pb port
-- R-Y IN (from deck) --> DVD Pr port
-- SDI IN (from deck) ---> DVD Digital audio out
ASWELL AS
From Decklink -- Y OUT (from deck) --> DVD Y port
-- B-Y OUT (from deck) --> DVD Pb port
-- R-Y OUT (from deck) --> DVD Pr port
-- SDI OUT (from deck) ---> DVD Digital audio out
</pre>
Not one has seemed to work. What am I missing here?
Thanks
Tiberius
PPC MDD Dual Boot/Dual 1.25GHz Mac OS 9.2.x 2 x 23" Apple HD Display, 2GB RAM, 2x150GB + 1x1TB HD

pomme4moi wrote:
I want to buy a hard disk (not a NAS device) and plug it into my Airport Extreme in order to share data between two Mac computers, and to stream iTunes content to my Apple TV.
One option is to purchase a hard drive (say, a 2TB Hitachi G-Technology drive) and connect it to the USB port on the back of the Apple Extreme. The other option is to purchase a drive with an ethernet connection (say, a 2TB Lacie drive) and connect it to an ethernet port on the Apple Extreme.
In the second case what you'd have actually is a NAS. Apple's AirPort routers aren't known for fast file sharing. The NAS option might be faster.
Is either option better for streaming movies from the hard drive to my Apple TV?
I could be wrong, but an AppleTV may not be able to access content directly from a network drive. It may require that a Mac serve as an intermediary.

Outputting via SDI to DigiBeta thru Blackmagic Decklink Extreme

I'm running Final Cut Pro 5.1.2 on MacOS 10.4.8. I've edited a 23.98FPS - DVCPro50 sequence. I can preview using the Decklink Extreme card fine. I can output via compenent out to a regular beta deck (UVW-1800) just fine, which is also the deck I use for monitoring while I am editing. I plug the SDI output from the decklink card into our digibeta deck (DVW-A500). I also send the audio over SDI. I see both the audio and video in my digibeta deck. If I just PLAY the sequence out, the digibeta sees and hears it fine. No problems.
This is my problem. Whenever I try to 'edit to tape' it usually starts out fine... then I get A LOT of digital drop outs / squares / digital distortion on the digibeta. They come up randomly and it also digitally distorts the audio when you play the tape back.
The digibeta deck is fine, as we use it to output via our Avid Media Composers every day...no dropouts or problems. It has to be with FCP / DeckLink Card when you try an 'edit to tape'. I've also tried a 'print to video' with the same results. Have you guys heard of this problem at all? Hopefully you have a fix for me...
thanks.

Awesome - the Out Ref fix did it!
When I did the edit to tape I tried both insert editing and assemble editing - both ended up the same.
On a side discussion - how do you sync the FCP machine with the black burst generator? I'm still a bit new to this - what exactly does the genlock do on the Decklink Extreme card? Is this where I sync with the black burst?
I assume the digibeta deck will also get synced with the same black burst generator. Does this go into the reference input on the back?
Thanks for your help,
-Grant

Blackmagic decklink extreme 4k capture issues

I can't get my decklink extreme 4k to capture anything at all! All the settings seem fine. I know the card works and captures in it's own software, but not in Premiere CS6. Nothing shows up! HELP!

YOu won't if you don't have the Decklink drivers installed...
Shane

OS 10.4.3, BlackMagic DeckLink Extreme and Motion 2.1 filter creshes

Any update on what Apple or BlackMagic Design is doing about this issue?
Is there a site that gives update information about what is going on, or when we will have a solution?
Clemente

Things never work that fast in the release world. I think we just learned of this problem less than a month ago - I'd bet we get something in the coming quarter... But I'm not holding my breath.
Patrick

BlackMagic Decklink Mini Monitor - how to output Source signal?

Dear PrP users,
I currently purchased a Blackmagic Decklink Mini Monitor video I/O to use with PP CC and SG CC as well as Da Vinci Resolve 9/10 once I move onto it; nothing too fancy which I'm fine with the kind of grading work I do. I did this so I could have a maximum of 4 computer monitors whilst I grade on my GPU then the additional output for the Director/Client.
However I did not know upon purchase that it only outputs the Canvas/Timeline (Program) from Premiere Pro. Before I would have my big TV output not only the Canvas (Program) but also the Viewer (Source) so I could show the Director/Client a clip from the browser without having to drop it into the timeline. This was a super useful feature and I am hoping to use this to Decklink Mini Monitor through premiere pro (as that is what I do primarily) that will both do Source and Program signals from PP CC. Is there a way to do that? Can it be done?
I will of course go on BlackMagic forums also to find out, but thought I'd try here also just incase.
Thank you.

You're right, I can output the Source monitor too however it will only output 1080p (I found this out my playing ProRes 1080p through the Source). The material I'm working with is r3d 4k, of which I am working in a 1080p timeline (down scaled and down sampled) which outputs the Program to the Blackmagic DeckLink just fine, when I try to put the same material in a 4k timeline it refuses to play it. Thus, the Browser and conversely the Source monitor has no choice but to output the r3d 4k in its native resolution (unless there is a way to non-destructively output the r3d 4k Source as 1080p also)?
Any solutions? Is it the video card itself (its BlackMagic cheapest model) which limited to 1080p or the TV itself I'm using?
Thank you for your advice.

CLoud Premiere Pro and BLackmagic Decklink

I,
I've installed the last driver Blackmagic Decklink extrem 3 but I've no output from Premiere Pro...

Am moving your discussion to the Premiere Pro forum. The experts here are better placed to help you.

Editable field with F4 help in alv tree output using cl_gui_alv_tree

HI
i need Editable field with F4 help in alv tree output using cl_gui_alv_tree
Regards
Naresh

Hi Naresh,
Pass the field catalog with the additional parameter (ls_fcat-edit = 'X'.).
for F4 help if the data element have the search help it automatically will come. other wise include the additional parameter in the field catalog (ls_fcat-F4AVAILABL = 'X')
Reward if found helpful.
Regards,
Boobalan Suburaj

Can anybody out there help shed some light on why no audio output using varispeed tempo only

Can anybody out there help shed some light on why no audio output using varispeed tempo only?
I am using Logic Pro 9 and finding no problems using the tempo and pitch option but when I just want to vari the tempo only I loose all output.
This includes no audio meter activity on channells.

Another worthwhile time/pitch related product is from Prosoniq. The version of Nuendo (not the latest) the University uses ships with the MPEX algorithm, which is related to to their flagship product.
http://www.prosoniq.com/www/TimeFactory_II.html
I've used it a bit to create the double-time/+1 octave Les Paul & Mary Ford guitar sound for a class demo demo and thought it did a very good job.
Yes, there is a Demo.

Getting red frames when export from cc 2014.2 codec used panasonic mxf format long GOP 50p. If any solution please help on that

getting red frames when export from cc 2014.2 codec used panasonic mxf format long GOP 50p. If any solution please help on that

i solve my red frame problem. originally my project was done in premiere pro cc 2014.2 & i render in Encoder cc 2014. in newer version i get lots of red frames. i complain a lot to adobe customer support . they said they know the issues but they couldn't solve. I was so tired from adobe customer support. one of the worse customer services i had. My friend got the mac pro & e got premiere pro cc 7.2 version. i convert all my footage mxf to mp4 in encoder cc 7.2 version and i succeed. i don't get any red frames.
So i think the problem is in adobe encoder cc 2014.2 version. newer version.

Blackmagic Decklink & FCE

I just bought a new Mac Pro and a Blackmagic Decklink SP PCI-Express card. I'm trying to get video from a DVCPro Player into FCE HD 3.5. FCE does not allow me to chose the decklink card though, only Firewire devices. Is there anyway to do this. So far the only other option I have is spending more money and getting FCP which I would rather not do right now as I just spent so much. Can someone please help and let me know my options?

Cool I will look into one of those or just get the enclosure and build my own. Probably will be cheaper on my own as is most cases. I did get my video in ok and am dumping it into DVD Studio as I type this message. FCP was the key as FCE was a little too consumer for the equipment we are using at them moment. I really appreciate all the help on this Tom. You deffently seem to know your way around all this. I unfortunately am learning the hard (& expensive) way. I am going to try and return my Declink card and upgrade to the Pro version so I will have SDI input for the next video we do. This one looks pretty good but the actual tape we have is so much more beatiful. I guess I have a lot more money I will need to spend before my Editing system is even close to being what I need. Do you have any ideas on where to get good deals on some of this stuff. I still need to get either another LCD like the one I'm using (Sony KLV-S23A10 HD) or get (2) 20" Trinitron flat screen CRT monitors and an output monitor, I have been using a 13" Sony with SDI in @ the TV station and it seems to be fine for what I'm doing, and some studio monitors. After that I think I'll be ok for a little while on my editing station. At least aside from more RAM and the RAID array. Let me know if you know of anywhere. I again appreciate the help on this Tom.
Mac Pro Mac OS X (10.4.7)
14" IBook G4 Mac OS X (10.4.7)
eMac G4 Mac OS X (10.3)

Premiere CS4 4.1 and Blackmagic Decklink

I've loaded CS4 4.1 along with the latest Blackmagic Decklink 7.2 update software. I can see my timeline playing on my production monitor but I have no audio. If I load a clip into a new project using just the DV-NTSC 4:3 option then I get audio but I don't see my playback on my production monitor. If I select new project and select the Blackmagic DV-NTSC 4:3 option then I see the playback on the monitor but I get no audio. I've tried to change the preferences in CS4 in the audio section to recognize the Blackmagic Audio output and still nothing. I've checked the Blackmagic audio drivers on my machine and they are recognized. Anyone have similar problem or ideas how to fix. Greatly appreciated.
Thanks

Have the same exact issues in our rig. Have the HD Extreme 3, with with our P6T7 WS SuperComputer MoBo with the intergrated SoundMAX HD audio and the Bose Companion 5 multimedia speaker system. I have contacted BM about this. Their support has been terrible to say the least. I have sent a couple emails in the past week with no response. I should have gone with the AJA Kona but thats another story. Our issue, which is similar to yours:
(my email to BM)
We have the HD Extreme 3 and we just purchased a Panasonic BT-LH1710 LCD reference HD monitor. We have it connected via BNC in the SDI on the monitor and out of the Extreme card in the first BNC slot (closest to the breakout cable input). We just shot footage with the Panasonic Varicam 2700 and if we choose DVCPROHD 720p from the presets in Premiere 4.1, we can view the material that is in the source monitor on the Panasonic but once we put on the timeline and thus program monitor, we cannot see the footage on the Panasonic reference monitor. If we choose from the Blackmagic presets it does work. Do we have to use the Blackmagic presets for our footage to be seen on our Panasonic monitor even though we should be using what we shot in, which in this case was DVCPROHD 720p 24fps P2?
-Answer to this from what I gathered from others is: "You must always use a Blackmagic Design preset when you create a new Sequence. You will never ever get any out put from any other Timeline" Which I really don't know how that effects the project when cutting, if at all since we are not capturing from the card (thus using BM's CODEC but rather, using footage shot from our Panny P2's.
Second issue is audio, even when using the blackmagic presets, we cannot hear audio. I have the settings all correct in Premiere and can see the levels moving, just can't hear anything out of our speakers. The audio works fine with our speakers in every other preset but Blackmagic's (if we choose Premiere Pro Sound as the Audio Hardware and Audio Output Mapping). Once we switch to Blackmagic, we do not hear any audio.
-Answer - I have tried everything and am still unsuccessful and getting audio to play out o our BOSE speakers. It does play (not well) our of the Panny reference monitor but am still searhing for a solution. Under control panel for audio, it does show blackmagic audio and working but nothing as of yet. Kind of driving me crazy.
If you read the third post down http://forums.adobe.com/message/1989667#1989667 from Roger he kind of touches on it but still doesn't solve the issue.
I'd be interested to hear if you have a solution or really anyone has a solution.

Can't playback on Blackmagic Decklink HD extreme 2

Hi all,
I am looking to crossgrade from FCP7 to Premiere CS6 so I have the Master Collection Demo installed on my work station along with FCP. It's on a 2008 Mac Pro with 2 Quad core 3.2G Intel Xeons, 16GB ram, ATi 2600 HD 250mb graphics and a Blackmagic Decklink HD Extreme 2. In the FCP set up this card fed a full HD JVC broadcast monitor via HD-SDI and I had no trouble with it at all and it played any type of sequence. My problem is that I can't for the life of me get a picture on the screen in Premiere. No combination of BM sequence settings or codecs, either BM or otherwise, seem to get it going. Output options seem extremely limited in the application set up with only one box to tick under the playback menu. This seems to have no effect whatsoever. The aplication can obviously see the card because the option to check it as a playback is there and the audio routes through without error. I have installed the latest Premiere updates and am running Desktop video 9.6. AE plays on the monitor fine but nothing in Premiere unless I switch the BM card to extended desktop and use the broadcast monitor as a second LCD and tick that option under the playback menu but then my GFX card seems to struggle and drops frames all over the place. I admit the ATI card is a bit of a slouch but options were limited for Mac unless you want the high end cards, which I am considering, could the fact the card is under powered have anything to do with video not getting to the BM card. I don't know much about the MPBE apart from the fact my card doesn't qualify.
Any ideas on how to proceed would be greatly appreciated.
Apart from no client monitor I'm loving Premiere, I'm finding th realtime stuff quite refreshing after FCP, which was a bit of a joke really in that area...but if I can't monitor, I can't make the switch.
Thanks in advance.

Hello,
You don't need to use the blackmagic presets to play back through your card. What are your settings under preferences>general?playback? You might want to try uninstallig the blackmagic presets and installing the latest Deskstop from BM. The uninstall option will be available when you download BM Desktop from their support site. Having the latest version isn't what is important but uninstalling is.
Cheers,
Gerry

Blackmagic Decklink Studio - No signal in FMLE

Hi. We are trying to set up a live webcast with Flash Media Live Encoder 3.2.1.1122 using a Mac Pro OSX 10.9 and a Blackmagic Decklink Studio card 9.9.3. This has worked in the past but upon setting it up recently, we've noticed that no picture or audio is coming through. We know the card works as the picture and audio come through perfectly in Blackmagic Media Express software. FMLE recognises the device but just shows a black screen. We've checked the settings and re-installed/updated all the software. Are we missing something? Thanks for your help!

Hi Pi,
Did you manage to resolve the problem? We're having similar issue. BM Media Express software recognises the card, but FMLE just reports it as Decklink and gives a blank input display. Any attempt to change settings causes FMLE to crash.
Thanks,

Capturing device offline with BlackMagic DeckLink Quad

Hi guys,
I have a problem capturing with a BlackMagic DeckLink Quad and Premiere Pro CS6. Capturing with the Blackmagic included Media Express software works fine. However, Premiere Pro tells me that my capturing device is offline.
What I did to run the capture:
Open Premiere Pro CS6
New project --> set capture to Blackmagic capture --> press ok
New sequence dialog --> select format exactly like specified in system control panel of BlackMagic (1080 25p).
Open capture dialog with F5 key.
Tells me that the capturing device is offline.
Controlling capturing properties for Blackmagic Capture and ensuring that they match the system control panel specs and the specs used in the other software(1080 25p, Video Format: Motion JPEG)
Final State --> Premiere Pro still tells me that the capturing device is offline and I have a black window.
I read somewhere that the installation order of driver and Premiere Pro is important, therefore I tried already both constalations (Driver, Premiere Pro - Premiere Pro, Driver ) without any success. A driver update of the Declink Quad did not have any effect.
Driver version:
Blackmagic DeckLink SDI - Date: 22.01.2015 Version: 13.4.10.868
Any help would be highly appreciated.
Best

Yes, Component is indeed not a better quality... Interesting because I did plug into a flatscreen, and I have nothing as well... So maybe it is the component out of the z1u that is not even working! Will try with another cable in case, but that may be the answer... Thank you for pointing that out! didn't even think about it...
I'm really trying to capture old HDV tapes, and always get those phantom breaks with Firewire (using another deck since it's broken on the z1u), now I'm wondering if you get less breaks doing 1080i or ProRes?? Although files are way bigger.

Help outputting using Panasonic AJ-SD955 / Blackmagic Decklink Extreme

Similar Messages

Maybe you are looking for