HELP! Ovi Suite "Packet Data Access Point Not Vali...

So i downloaded Ovi suite to get internet from my phone i have a Nokia 3711 and when i try to connect i get this message on my phone "Packet data access point not valid" what does this mean? and how can i fix it? I have unlimited internet data thing..

I guess you can call up your service provider customer service and ask them to re-send the settings!

Similar Messages

Packet data access point not vail

Hello,please i need help,any time i try to connect my phone my pc the responce is always packet data not avil. what should i do to get rid of the problem

that will work. You only need to change if you need to have always on (highly unlikley) or if you are using modem dial up and need to specify access point for that.
If you using Nokia One Touch access then you don't even need to define access point in this menu as that application will take care of it for you.
All other network aware applications will use access point settings as defined in settings menu.

N70 Packet Data/Access Points?

I got my phone from a friend about a year ago. He had a Telstra sim card in it, but I had a Vodafone. So I put my sim card in, but the MMS wouldn't work. So I changed a few settings and managed to fix it.
However, my phone recently had it's memory wiped, including all the setting changes I made.
But now the MMS isn't working again!
I tried to change the packet data/access point stuff, but it doesn't come up with anything to do with Vodafone...only Telstra.
Please help?

Hi, just go to your local nokia website. Settings can be ordered from the support section. Settings will be sent to you by sms.

Nokia e71, i lost my packet data access point. how...

back when i didnt have a data plan, i deleted the packet data access points, but now that ive upgraded i cannot seem to find those points back. can anyone help me out?

I guess you can call up your service provider customer service and ask them to re-send the settings!

E63 Packet data Access point set to None? What hap...

What happens when Packet Data>Access point is set to None(blank)? I tried to tether with my phone and I was connected to the internet for a moment. Checked my ip and it turns out it's through my mobile phone companies subnet.
However via the Bluetooth DUN setup on my computer I specifid a computer and login information which it seemed to ignore? Can anyone explain this strange situation?
The phone I'm using is an E63 GSM phone.

that will work. You only need to change if you need to have always on (highly unlikley) or if you are using modem dial up and need to specify access point for that.
If you using Nokia One Touch access then you don't even need to define access point in this menu as that application will take care of it for you.
All other network aware applications will use access point settings as defined in settings menu.

Packet Data Access Point Names vs real data server...

I am trying to activate an application that requires GPRS.
I currently can get EGPRS and assume that will do the same but faster. But I have a question that may not pertain to this but as I am new at this I will ask it here. From reading I see that the settings of packet data appear to have more to do with setting up phone as a modem to use. So I don't know truly if this has any bearing on my problem with the software registering to complete the setup of it.
However my web access which is unlimited month to month internet access which allows me to go anywhere on web (not a walled garden) also uses this GPRS or EDGE version of GPRS. I am in the USA with T-Mobile. Phone is set to use GSM. The screen where it concerns connectivity says that I have Access Points which were configured by T-Mobile sms file they sent me twice. I actually have 5 names under Access Points.
1)MMS = wap.voicestream.com
2)T-Mo WEB = Internet.voicestream2.com with small i in settings
3)T-Mo WEB(01) - this from 2nd sms copy same
4)T-Mobile Internet = Internet.voicestream2.com with small i in settings too.
5)t-zones this is their wall garden = wap.voicestream.com
ok since I can browse the web anywhere and download the application I don't know why I cannot register it. But it states it needs an internet connection before activation through authentication, or basically registering it to use.
So I am trying to do this after verifying that I have an internet connection with the too connection arrows symbols on phone screen showing internet connectivity with E over them currently by starting a browser first as the application doesn't seem to do this for me when trying to activate it.
E
--> where the lines are solid. Ok here is my issue here.
The arrows are not coming up correctly in this forum anyway I get what shows I have EGPRS connectivity, I don't know if the application is sensitive to using GPRS only but will find out. I doubt it. The GPRS would show the arrows with an antennae above. I am talking about the indicators from what the pdf and book say.
Below Access Points on the menu in settings for connection is Packet data.
Packet data has to variables
1) when needed , or when available
2) Access point
Access point is blank. Should I enter one of T-Mobiles names in the list above this under Access Points such as
T-Mobile Internet or should I put the server name in specifically internet2.voicestream.com?
I set the Data Call setting to Unlimited to make sure if its using this process it doesn't turn off after the 5 minute default on the next setting.
Any ideas why this gprs app is not activating itself and making the gprs internet connection with the pin I was provided? I had to use the pin just to download it and install it.

that will work. You only need to change if you need to have always on (highly unlikley) or if you are using modem dial up and need to specify access point for that.
If you using Nokia One Touch access then you don't even need to define access point in this menu as that application will take care of it for you.
All other network aware applications will use access point settings as defined in settings menu.

The Data access service not running or not yet initialized.

Hello guys ,
i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error
OS : Windows 2012r2 patched and scom 2012 r2
sql : 2012 r2 enuff database size
tried few things as :
1. change the account to domain admin for system center data acess service still no luck
2. created registry keys for servicepipetimeout to 6000 bt still nit working
3. Refresh sql account used for sccom data aceess service still no luck
4. the service disappears as running after 30 seconds and the console is unable to open
kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
thanks guys in advance
Basit Siddiqui
AIG

Check that following:
Verify permission of SCOM Account on sysadmin and OM DB.
Check firewall that is disable
Check antivirus that didn't block scom folders or services.
Check SQL services is running
Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
Also you can check below link
http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Nokia Ovi Suite (2.2.0.241) Not Uninstall, always ...

Hi,
I'm trying to uninstall my OVI Suite, but the software always reinstall, over and over again. I do it through the pointer remove programs in WinXP.
Where I find the menu uninstall in the ovi suite, if this menu is not showed?
Has someone a good idea to delete it? ( Register, Folders....)
Thanks in advance,

Hi,
I have just the same issue and I don't have any idea about how to fix it! :-)
Is there anyone who can suggest how to proceed?
Thanks a lot!
JohnBaron
fnathan wrote:
Hi,
I'm trying to uninstall my OVI Suite, but the software always reinstall, over and over again. I do it through the pointer remove programs in WinXP.
Where I find the menu uninstall in the ovi suite, if this menu is not showed?
Has someone a good idea to delete it? ( Register, Folders....)
Thanks in advance,

Access Points not overwritten when restoring a bac...

Hi people,
Seems like the new and still buggy firmware of the E70 has another problem.
Before restoring a backup, if you do not remove the Access Point definitions (only operator Access Points, not Wi-Fi or others), the restore does not overwrite the definitions and makes new copies of the Access Points.
That would be OK if we could remove the extra Access Points but we cannot. When you delete one of the copies, it seems like it is removed but its definition is still somewhere on the phone, so while "Connection Settings" program cannot see it, all programs that use Access Points can see it (but cannot use it because it is a stale record).
Does anyone know where this info is stored so, if I forget to remove them before restoring a backup, I can remove them afterwards?
Kerem Erkan
IT Professional
E70 (2.0618.07.10 - 31.08.06 RM-10)

Welcome to the many problems of the LAPAC1750. I finally gave up and went with Ubnt. Uptime is at 75 days now and would've been longer if not for a firmware update.
The LAPAC had good range and worked well when it worked, but it's unstable to be marketed right now. Hopefully Linksys issues a firmware update to fix everything.

I have an airport extreme i am trying to add to an existing netowrk as an access point not as a router, any help is appreciated as i don't know much about networking.

At my work we have a modem and router to network 8 different pc's- all hard wired. My boss wants me to add an airport extreme so that he can get wireless connection on mobile devices. when i plug in the airport it creates a new network and i need to be able to connect to the existing network and not have the routers compete. is there a way to make the airport an access point instead? maybe by adding it to the exisiting router instead of one of the workstations?

When you introduced the AirPort Extreme, you had a condition where you have two routers in series. The simpliest solution is to reconfigure the downstream router (in this case the Extreme) as a bridge. This will allow the upstream router to provide the required NAT & DHCP services to all network clients regardless of which router they are connected to.
To reconfigure the Extreme as a bridge, you will use the AirPort Utility. (Note: I will provide the steps for using AirPort Utility v5.x)
AirPort Utility > Select the AirPort > Manual Setup
Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode)

E75 - packet data n internet not working - hard re...

One fine day, my gprs/edge and net stopped working on my E 75.
I did a hard reset, firmware upgrade and even on the formatted version , it does not seem to work
the message just says 'connecting''
The network operator has confirmed tat the net is working n there is no problem on their side. they even deactivated n refreshed my account.
I do not know whether Ovi contacts had an effect. coz it seemed to have automatically installed
now the phone is clean with out any software but yet my packet connection does not work
even entered the settings manually..
anyone come across this?

Check with your network and get them to make sure everything is fine their end. Also request they send you the access point settings by sms. Once you receive the sms, you can delete the old access points before reinstalling them from the sms.

CISCO Aironet access point - not able to connect by user.

Hi,
I have CISCO Aironet access point C1130 in my network , but not able to connect by users, I can see below logs from access point. please help on this.
Jun 13 17:50:10.686: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:10.686: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:15.678: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:15.678: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:20.544: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:20.544: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:24.832: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:24.832: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:29.741: RADIUS: Fail-over denied to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS: No response from (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS/DECODE: No response from radius-server; parse response; FAIL
Jun 13 17:50:29.741: RADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
Jun 13 17:50:29.741: dot11_auth_dot1x_parse_aaa_resp: Received server response: FAILOVER_RETRY
Jun 13 17:50:29.742: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server response
Jun 13 17:50:29.742: Client 5864.6c67.3718 failed: EAP reason 0
Jun 13 17:50:29.742: dot11_auth_dot1x_parse_aaa_resp: Failed client 5894.6b37.3518 with aaa_req_status_detail 0
Jun 13 17:50:29.742: dot11_auth_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_FAIL) for 5894.6b37.3518
Jun 13 17:50:29.742: dot11_auth_dot1x_send_response_to_client: Forwarding server message to client 5894.6b37.3518
Jun 13 17:50:29.742: dot11_auth_dot1x_send_response_to_client: Started timer client_timeout 30 seconds
Jun 13 17:50:29.743: dot11_auth_dot1x_send_client_fail: Authentication failed for 5894.6b37.3518
Jun 13 17:50:29.743: %DOT11-7-AUTH_FAILED: Station 5894.6b37.3518 Authentication failed
Regards,

Hi Niham,
You can try few things to troubleshoot this -
1. check the reachability of Radius server from your wlc (ping).
2. verify the IP address of Raduis server configured on wlc.
3. wlc in the Radius server ?
4. Shared Secret must be same on wlc and in raduis server.
Plz do not forget to rate useful post.
Thanks

Nokia 2710 sync with Ovi Suite 2.2.1.23 not

Hi,
I have even a small problem.
When I start the Nokia Ovi Suite and my Nokia 2710 Navigator plug in, the program recognizes the phone, it happens in addition to a rotating group "set up" and nothing more.
So I can not sync my mobile phone content. What am I doing wrong?
Thanks in advance .....
Steffen
PS: With the Nokia PC suite I can sync my mobile phone content easily.

Could you please follow this?
. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
2. Delete the files from here If anything is there
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
C:\Documents and Settings\user\Local Settings\Application Data\Nokia
C:\Documents and Settings\All Users\Application Data\OviInstallerCache
3. Please search and download MSI clean up utility from microsoft website
Once installed please select the programs related to Nokia and click remove.
Restart Computer.
Then download from microsoft website and install Windows Installer, so that the installer is upto date.
4. Restart the PC
5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Access Points Not Passing DHCP to Clients

I have a 50+ access point deployment, all in a single VLAN (DMZ), across a dozen buildings. We recently experienced wierdness of the following sort. Clients would request DHCP request, DHCP servers would forward requests, which would not get passed from the AP to the clients. We could verify that DHCP and all other parts of network were fine. I had to cold boot each AP to clear the condition. I could find nothing in this mix of 350s and 1200s or the spectrum that would indicate an obvious attack... Couldn't find where to start looking for any tables that were full, or any real place to look for some other reason for this. Yet after cold boot- all is well.
Any thoughts, in case it happens again?

Hi Guys,
I am having a similar problem to you, however i can get authentciated via LEAP, but dont seem to get an IP adderss from the radius server.
My setup is very simple as i am at the design stage. We have a Cisco AP 1200 (2.4 and 5.0 GHZ) and we are using FUNK steel belted RADIUS server. LEAP authentication works fine and i can see the association on the AP. The wirless client (HP W400 integrated Wireless cards) shows that it has been authenticated successfully too. However no IP is being received. We have a IP Pool configured on the SBR server and the SBR server shows that it has issued an IP address.
Next step was to place a sniffer and capture the packets. The capture shows the radius requests and challenges and in the very last ACCEPT packet we can see that the SBR has issued an IP address.
I am confused as i cant see anything on AP that would block the IP address. There are also a few attributes showing as "unknown" in the sniffer trace, so im not too sure wgats going on.
Can anyone help. The IOS is 12.2 (13) JA

Access points not showing on my N70 (contract)

Hi all
I have at least 2 access points that aren't showing up in my list. Besides the several PAYG and the CONTRACT that are locked and unviewable/editable, I know there is one in there called BT but it isn't showing up. It was there before but not I can't see it. Another confirmation that it's there, but just not visible, is that if I try to create another one called BT it saves as BT(01).
How can I see all my access points?
Thanks

I've had to reboot or restart my Z10 to get my remote PC to appear.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HELP! Ovi Suite "Packet Data Access Point Not Vali...

Similar Messages

Maybe you are looking for