HELP -- panasonic MXF import to FCP7 with OSX/Lion???

Is there a Panasonic Plugin to import MXF material via the Log-n-Transfer within FCP7?   Panasonic's site is AWFUL and I'm out of luck.  Right now the L&T window sees the P2 material but is only showing AVC-Intra as a source format so it's ignoring the target compressor setting and defaulting to DVCPro HD 720p60 as a format.  

If by "no problem" you mean that it imports and doesn't touch the source codec, frame rate, audio rate, or pixel aspect ratio then yes, I'd agree but the context of my question is based on previous experiences ingeting P2 material recorded with AVC-Intra which does allow for appropiate transcoding to a target codec, frame rate, and audio format based on the preference cog.
What's problematic is that the issue/oversight exists within Compressor too.   I found a working solution of using Adobe Media Encoder which properly interepreted the frame rate and audio sync, whereas Compressor simply transcoded video only and didn't know how ot handle the frame rate issue that is so indicative of panasonic. 
Not tryign to be snarky, just pointing out that Apple and Panasonic seem to have a complete disregard for a working solution to using MXF material recorded in something other than AVC-Intra.

Similar Messages

  • Help Center is running extremely slow in OSX Lion.

    Help Center is running extremely slow on my MacBook Pro with OSX Lion (8 GB RAM, 2.4 Ghz Intel Core i5).
    It takes several seconds to start up, occasionally variable names like "[currentBookname]" are displayed instead of section headings, results update extremely slowly. This has always been an issue but keeps getting worse it seems.

    Hi Ester:
        Please check if the SAP Notes below are applicable to your System.
    1516870 - "Performance improvement FTI_LDB_PB_SEL_PREPARE_OUTPUT"
    1376395 - "BW, REP: Performance of Accounting Data Extraction"
    1307259 - "REP: Improving performance of extractor 0CFM_DELTA_POSITIONS"
    Regards,
    Francisco Milán.

  • Graphic problem with OSX Lion - freezing all windows

    I try to define my graphic problem with OSX Lion. Simply if you have set for example hot cornes and switch between desktop, all windows etc. the move of switchng windows i chopping and freezing. I dont idea why, but it hapennig since I installed Windows 7 via bootcamp. But the problem is still here after I remove Windows. Cleaning cash doesnt work. Can anybody help me please?

    No, it's not Lion. It may be something you installed. If you just bought it you could also take it back to the Apple Store and they may be able to help.

  • I got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i c

    i got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion
    but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
    any ideas ?

    Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
    http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

  • I am using a new imac with osx lion 10.7.5 and have bought a copy of Apple iLife 11 on dvd a so that I can install iWeb and idvd, when I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate

    I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
    Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?

    Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
    Then use Software Update to get any late iDVD updates.

  • With OSX Lion, how use Spotlight to know the way to a file you are searching ; formerly , with Snow leopard you had only to let the arrow pointer on the name of the file , but now on Lion it didn't work, how to do ?

    How to know the way to a file you are searching in Spotlight with OSX Lion ?

    You are right, the way to the file appear down the virtual picture, near the title of the documents ; it is a little more complicated than in Snw Leopard , but it works
    Many thanks from France
    Robert

  • Hello.  I am running Photoshop CC 2014 on a MAC with OSX LION.  I also have Photoshop CS6 installed.  When I double-click on a file in Bridge CC, it always opens in CS6.  If I say "OPEN WITH Photoshop CC 2014", or if I drag the file directly to CC 2014 in

    Hello.  I am running Photoshop CC 2014 on a MAC with OSX LION.  I also have Photoshop CS6 installed.  When I double-click on a file in Bridge CC, it always opens in CS6.  If I say "OPEN WITH Photoshop CC 2014", or if I drag the file directly to CC 2014 in the Dock it will open in CC.  Since I like to double-click or hit return in the bridge, I am constantly having to wait until the file opens in CS6, quit CS6 an then open it another way to get it into Photoshop CC 2014.  I tried to disable CS6 by hiding it, but then double-clicking Bridge did nothing.  Any ideas why this is happening?

    Check and adjust the File Type Associations in the bridge cc preferences.

  • HT1338 Dear all, I have just bought a MacBook pro with osx lion on 25thast month. I wanted to know if I can use the methods described above to update to osx mountain lion or I have to buy osx mountain lion from the app store?

    Dear all, I have just bought a MacBook pro with osx lion on 25th last month. I wanted to know if I can use the methods described above to update to osx mountain lion or I have to buy osx mountain lion from the app store?

    Here are the rules to qualify for the free upgrade:
    http://www.apple.com/osx/uptodate/
    (has to be purchased from Apple or authorized reseller).

  • Has anyone found an app that will check programs on my computer for compatibility with osx lion?

    Has anyone found an app that will check the programs on my computer running Snow Leopard for compatibility with osx lion?  Thanks
    Ken

    No app needed, just go into your Utlities folder and click on System Information (it could go by another name). Click on Software and then Applications. Wait a minute for it to load and then check for anything that says "PowerPC" instead of Universal or Intel. PowerPC software will not work in Lion. With my 100+ apps, none of them were PowerPC.
    Note: You may have to resize the System Information window to see the operating information.

  • HT4437 is airplay mirroring possible with mac with osx lion?

    is airplay mirroring possible with mac with osx lion?

    It is a feature of ML not Lion and only if you have a fairly recent (2011 or later, check first) Mac.  Airparrot app will do the mirroring on Lion for a couple of bucks.

  • Please help with osx lion update

    why doesn't my osx lion show up after I already installed it? It also never charged me the $30..?, why doesn't my osx lion show up after I already installed it? It also never charged me the $30..?

    Well, let's see if we can figure out which OS version you're running: Go to the Apple, click on it, and then on
    about this Mac. In the new window, please click on the text underneath the Mac OS X and post it here (if you click on that long enough, you'll get your serial number - don't post that); just post the Version # 10.x.x
    Edit: You purchased this new in late 2011? If so, you would already have Lion installed on it....

  • Triple Display Issue with OSX Lion

    I have the following setup:
    iMac OSX (Snow Leopard)
    3.06 GHz Intel Core i3
    4GB 1333 MHz DDR3
    500GB Hard Drive
    I have 3 monitors hooked up, one is a 24 inch benQ through mini display with vga and then i have the 21.5 imac and then a 23 inch acer hooked up with an external usb video card usb to dvi. I had this setup before lion was released when i was using snow leopard and it worked perfectly fine, but now with the lion update it does not work the screen just continuiously flickers on and off; i tried swapping monitors and it still doesnt work so it has to do with a possible software issue.
    I have updated to the latest drivers, installed restarted and everything i can think of; does anyone have any suggestions?
    This is a video I made of my issue:
    http://www.youtube.com/watch?v=h23Rtkfiuq8&feature=channel_video_title
    If anyone can help i would GREATLY appreciate it!

    I'm pretty sure its not a monitor issue, as the issues vary between monitors
    I'm pretty sure this is a display and adapter and interface problem, especially when the name(s) of your display(s)  show up wrong after sleep.
    The Mac uses one display driver that is highly parameterized. The parameters to be used are set by sending a query to the display for its name and capabilities. This query is sent on the secondary digital data channel, and is sometimes referred to as EDID data.
    Currently both 20's are recognised as 'vga display' or 'color LCD', no resolution options are available, just what it defaults to (640 x 480)
    When the name of the display is not correctly reflected in the name of its Display Preferences pane, that is a direct indication the display-adapter-cable-display part of the chain "dropped the ball" in resounding to the Mac's query for capabilities.
    Adapters that do not pass the EDID data through, and displays that do not answer when queried for their name and capabilities are the primary source of problems. For example, TV sets that are not "paying attention" to the secondary data channel, and therefore do not answer the query, drive Mac users crazy.
    The query is sent in response to four different events:
    • System Startup
    • wake form sleep
    • cable insertion at the Mac-end (not necessarily at the Display-end)
    • The use of the Option-Detect_Displays button in Displays Preferences window

  • Which Rapport version do I use with OSX Lion

    My Business Banking via HSBC keeps telling me to download Trusteer Rapport - but it gives only two versions for Mac - one is called Mac Leopard and the other Mac Tiger. I don't know which one to download as I am running OSX Lion.  Phoned the Bank and they can't help me either.
    I have been on the Trusteer site - but can't find the answer there and they have not responded to my email (2 weeks ago) asking them which version to install.
    Has anyone else had this problem and how do I sort it.
    Any other comments on Rapport would be good too.
    Many thanks

    I found the following Answer on Trusteer's website about their product "Rapport":
    Does Rapport support Mac Mountain Lion (10.8)?
    http://my.nanorep.com/widget/widget.html?account=trusteer&referer=http%3A//www.t rusteer.com/support/&dynamicsize=true&dynamicmaxsize=500
    We are glad to inform you that a version of Rapport which supports Mac OS X 10.8 (Mountain Lion) has been released and is now available for download in the following link: http://www.trusteer.com/support/leopard-105x-snow-leopard-106x-lion-107x-and-mou ntain-lion-108x
    Please make sure to restart your computer after the installation process is completed.
    So if you download and install this latest Version of Rapport for the Mac OSX version, it should work with Lion also.
    Hope this helps
    Message was edited by: Radiation Mac

  • Request help for purchasing HD webcams using iMac, OSX &Lion

    I am requesting help for purchasing a HD webcam using iMac, OSX &Lion.  Any suggestions would help.  The following is what I've done so far...
    I purchased Logitech's HD C910 webcam. It was a mess in requards to freezing up, no zoom and most of all no adjustments in: contrast, hue, color, etc. You're stuck just like a car with no engine or wheels who wants that.  The other Logitech products i.e. Pro 9000 is being discontinued with no software updates in the future  and the same with the other products. Most of the other manufactures do not provide software that is really compatible provideing true HD with full features. I'm willing to spend around $199,00 or so.  Any suggestions?

    Well I found my own answer to the webcam concern that I had ....I bought the Logitech C-910...Yes, I know the Logitech states their software is not compatible with OS X ...That's OK, I only use the basics supplied by Logitech to open the cam...Logitech does supply HD settings which are useful.  I like the wide angle which is there to play around. Then I use a software program called "Webcams Settings" found at Apple's App Store. There is a small charge for this download but more than worth it to have a fully functioning system.  The best way to get there is obliviously via your "Dock." Click on the icon and type in "Webcam Settings" in the top right portion of the page and presto....you have all the goodies to play like a professional. i.e.:  zoom, pan, tilt, aperture. etc. of course your webcam camera(s) must have the capability to perform these options in order to use them.
      Note I have used my webcam for everything you can imagine and have a 60 foot cord (several cords linked together) to go outside (LOL) 'Just love the goodies with "Webcam Settings".  I take outstanding pics too if I do say so, please.  Funny, I rarely use my cam to Skype but knowing the option is there for me anytime I wish.  I my cam to photograph orchids and misc. even portraits and family play photos with my tripod in hand.   Just because there is a big road block in your path doesn't mean there aren't other avenues. In the corporate life it's called take a negative and make it a positive or else.......and if you have to gripe then you better have an idea on how to turn it around.  -So- I did Logitech and Apple.

  • Our imac runs osx snow leopard but it cant find the hard drive or it is corrupt, is it possible to reboot it with osx lion?

    our imac recently displayed the white screen and flashing file icon with a question mark on it, it runs osx snow leopard but i dont have the installation disc, can i reboot it off the osx lion disc? or do i need to buy the snow leopard disc and reboot it off that first.  thanks for your help in advance!

    Yes you can. If the iMac meets the system requirements for Lion then you can boot it off the Lion disc (which is actually a USB drive, unless you download and burn it yourself).

Maybe you are looking for