Help!  Patch needed for printer?  Print function crashing programs...

I've had a HP PSC 2410 (an all-in-one) for a few years now--carried over from my PC days. When I got my Powerbook I installed the print-only driver from the HP website and have printed without incident. A couple of days ago I downloaded a driver for this printer which I believed would allow me all of my functionality but the installer has never run properly as my printer does not show up on the list available (none do) so I am unable to complete the guided walk-through. My printer is hooked up to my Airport Express. I have, under limited circumstances, been able to print occasionally since I've downloaded this new driver. More often than not however, whatever program I'm using and trying to print from crashes. Any ideas? I once spoke with an Apple employee who told me I could use this printer but would need a patch, I never thought about it again until this has been happening... Anyone know of such a patch and where to find it? Thanks.
Powerbook G4   Mac OS X (10.3.9)  

You don't need the Bing bar for smart print any longer. I'm using IE9 and have uninstalled the Bing bar.

Similar Messages

  • What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

    What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

    Hi,
    just found your post...
    To install your HP1010 on Win7do the following:
    Start
    Devices & Printers
    Add a printer
    Adda local printer
    Use an existing port: DOT4_001 (Generic IEEE...)
    Next
    Pick HP from manufacturer
    Select HP LaserJet 3055 PCL5
    Next
    Name the printer something to your liking
    Finish (or so, just follow the prompts)
    Here you are!
    Works every time for me, never had a problem from any application.
    I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message.  Be with me...
    Matt

  • Hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?

    hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?

    Ah!
    Factuur Bright x
    part of errors:
    Process:         Factuur Bright X [1476]
    Path:            /Applications/Factuur Bright X/Factuur Bright X.app/Contents/MacOS/Factuur Bright X
    Identifier:      ???
    Version:         ??? (2.0.0b20)
    Code Type:       X86 (Native)
    Parent Process:  launchd [184]
    User ID:         501
    Date/Time:       2013-07-10 22:35:39.180 +0200
    OS Version:      Mac OS X 10.8.4 (12E55)
    Report Version:  10
    Interval Since Last Report:          2118 sec
    Crashes Since Last Report:           1
    Per-App Interval Since Last Report:  24 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      47D641A2-4625-7590-369C-8BAFE1439551
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000010

  • I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?

    I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?
    Many thanks for any advice.
    David

    You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

  • What kind of document i need for register  iOS Developer Enterprise Program ?

    What kind of document i need for register  iOS Developer Enterprise Program ?

    Wond,
    I have full access(SAP_ALL) on BI. What kind of Authorization on R/3 system to extract the data?
    Thanks,

  • Bing-Bar help needed for Smart Print activation

    I attempted to install Bing bar, but get the message that my computer will only install in Explorer,which is what I am using.  I have a Windows xp, and an HP Photosmart printer

    You don't need the Bing bar for smart print any longer. I'm using IE9 and have uninstalled the Bing bar.

  • Need help setting up for wireless printing- remote access- by email

    When trying to set up my printer I get a box that says "Printers Code", is the "printer code" another word for hardware address or is it the access point hw address or what is it? I wish the HP people would stick to the same nomenclature in their set up!

    Hi,
    Printer code is a code for your printer which allows you to register to ePrint center. From there you can get printer email address and you can email to this email address for printer to print. Not all printers have printer code. You can read more information from the following link:
       https://h30495.www3.hp.com/help/about
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Patch needed for uploading sap ecc 6.0 country india version

    Hello experts,We are facing problems whileworking with the cin module,First of all i would like to convey that our server is based at jakarta and that the license is based at jakarta(indonasia),however the off shore delivery centre is based at india,so please guide us like what patches are needed to be uploaded so that we can operate the cin version.
    Functional error----- The error or problem been faced by the functional consultants is that while entering the FTXP tranction the respective fields are always in the display mode and not allowing to enter any data(only single session been opened and not the case of multiple session in the same tranction),
    pls guide,thanks in advance,
    Anshuman.

    Thanks guys for your replies.
    Uday,
    Is there any Authorization object that will let me download ECC IDES?. I  dont see any such object ( named ECC or similar) assigned to my SID in Serv Mkt Place.
    Could that be the reason?. Pls advise.
    JD
    >
    uday kumar wrote:
    > Hi
    >
    >
    All corrective software packages, for SAP NetWeaver 7.0 and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer. Find more details here
    > Its applies for only support packs and SP stacks you can download Software packaged irrespective of solution mangaer directly
    >
    >
    Sorry if its a repeat question. I need ur help. I was trying to download SAP ECC 6.0 IDES from SAP service market place. I identified all the files needed for ECC 6.0 IDES version installation, added them to download basket, though they wont show up there
    > R u sure that you have added them to download basket,do you have proper authorization to download them to download manager,cross check the setting of download manager and your S userid and password.
    >
    >
    I have Serv Mkt place ID and is there anything else that I need to install first to be able to download IDES files?.
    > Did you configure downlaod manager at your desktop or forntend server?
    >
    > Regards
    > Uday

  • Any patch need for OEM10.2.0.5 and R12.1.1 (X86_64)

    we plan to install OEM 10.2.0.5 on X86_64 server and work with R12.1.1 EBS.
    does anyone know any patch need apply for both?
    Thanks.

    Hi,
    Please see these docs/links.
    Note: 812315.1 - Oracle Application Management Pack for Oracle E-Business Suite, Release 3.0
    Applications Management and Change Management Packs Certified with Enterprise Manager Grid Control Release 5
    http://blogs.oracle.com/stevenChan/2009/06/amp_acmp_certified_with_emgcr5.html
    Regards,
    Hussein

  • Any patch need for Grid control 10.2.0.5 to install Application management

    We already have ORACLE Grid Control 10.2.0.5 (X86 version) on Linux server. Due to we have EBS, We plan to install ORACLE Application Management Pack 3.0 into Grid Control 10.2.0.5.
    I heard there have patch need apply to Grid Control 10.20.05 before install Application management pack into it. Anyone know which patch?
    Thanks.

    when you click on the tab "Application Servers" on the far upper left site of the GridControl (right next to Hosts, Databases, ...) then
    you will see of which components the Oracle Application server exists (HTTP-server, OC4J, WebCache, ...). Therefore the HTTP-server is just
    part of the application server - and if the application server gets shut down it's meant that all components wil get shut down...
    HTH

  • Help needed for wireless printing.

    Hi
    I have tried to set up my printer via the USB connection on the TC and the printer shows up in the Airport Utility, but won't print. When I run network diagnostics, it shows that everything works OK and then the server goes from green to red.
    The odd thing is that the printer then prints ' Internal error- incomplete session by time out'.
    When I go through the diagnostics I get the following. message. NetworkDiagnostics was able to connect to the internet but not to the server "Samsung SCX-4500 Series.riousbprint.tcp.local
    Can anyone suggest a way to get the printer working.
    I am new to Mac's and networking so an 'idiots guide' type fix would be much appreciated.
    Thanks
    M

    When I go in to do a design with a customer, I make sure I understand the devices that need to use the wireless.  Some things you already know about (the usual wireless devices).  Devices that might impact business, you need the customer to provide info on that device or a contact for that device.  This way you can make sure their requirements are meet.  It doesn't really matter what AP's you use as long as you know what you need to configure to make things work.
    I would go with a WLC 5508 and the 3500i (internal antenna).  This WLC has various options for license and depending on how many AP's you need, you can satifiy that with a base license or adding license if you add more later.  YOu can also look at the 1142 AP's, but the 3500 will provide you with the capability of doing CleanAir.
    WLC 5508 Licesne (table 3): http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html
    CleanAir Technology: http://www.cisco.com/en/US/netsol/ns1070/index.html

  • Info needed for Lexmark printer App

    I need the following for my Lexmark Printer Application to be able to print from my samsung note 4 cellphone to my wireless lexmark printer:   (1)  The server address, (2) IP address, and (3) Host Name.             thanks

    Hi,
    I replaced my Z10 with a new one. I used the Blackberry link to restore the data to my new device. I configured the mails and applications i normally use.
    However i started getting notification in the BB hub for Twitly and some other apps that I cannot guess as only user ID was mentioned in the prompt.
    I had stopped using Twitly about 6 months ago and there fore it should not have been in the backup i made last (the one i sued during restore).
    Please help.

  • Color assistance needed for commercial printer

    Hi there,
    We're a board game publisher about to send our first game to an overseas manufacturer. The game is composed of hundreds of cards with detailed, fantasy art, and we're excited to get this game finally out the door.
    We sent the raw, packaged indesign (CS6) files to a local printer to see how everything would look before we have 3,000 copies of the game made overseas. The local printer used the same process that the overseas printer will, a 4 color high-end printer that is certainly impressive to people new to the industry such as ourselves. The sample cards they printed came out with fantastic clarity, but the colors are very muted. It's not a subtle change in color like I might see when toggling RGB to CMYK in photoshop for example. Instead, the colors on the print out look like someone slid a color saturation slider on the entire indesign file down by 25%.
    When we print on our low-end inket at the office, the resolution is obviously poor, but the colors look great and match our calibrated monitors. When we export to PDF using "Press Quality", everything looks perfect on multiple computers here and at other locations away from the office. It's only the most important step, printing on a full-blown, commercial printer that the colors look so muted.
    Here are some crude photos I took on my phone to help show the difference.
    These photos have our office, inkjet printer cards are more colorful and the high-quality commercial printer cards are muted (sorry for the strange alignment, this forum is rotating the images for some reason):
    http://www.watchtowergames.com/wp-content/uploads/2014/02/photo-1.jpg
    http://www.watchtowergames.com/wp-content/uploads/2014/02/photo-2.jpg
    http://www.watchtowergames.com/wp-content/uploads/2014/02/photo-3.jpg
    Different cards here:
    http://www.watchtowergames.com/wp-content/uploads/2014/02/photo-1b.jpg
    http://www.watchtowergames.com/wp-content/uploads/2014/02/photo-2b.jpg
    I've researched about swatches and color profiles, but all my experimenting hasn't produced any difference on my end. Therein lies the challenge, as I cannot duplicate the problem here at the office. The colors look great in indesign, great in exported PDFs, and great on our inkjet printed cards. Only when we pay a decent amount of money to the local commercial printer do we get these muted colors in our samples. And the local printer says their setup is exactly the same as our overseas manufacturer, which is terrifying. We've spent 17 months agonizing over all the details of the look of our cards for aesthetic purposes and game play so that players can quickly identify each card type by color. These muted colors will really mess the game up. We're pulling our hair out over here.
    The local printer has offered to provide a color correction service for us, but at $100 an hour, that sounds like a lot for a new business like ours.
    Is there some setting inside indesign that we are missing? Is there a way to replicate the muted colors on our end so we can at least troubleshoot this? Is there a method to turn up the saturation, if you will, for 4 color printing? Should we bite the bullet and pay the local printer an arm and a leg to color correct this? Any help would be greatly appreciated.
    Thank you,
    Tom
    P.S. Also, if it helps, when we had the local printer digitally print a sample, everything looked far too dark, which they said was a side effect of the digital print process.

    Thanks for the response, Rob.
    We talked with a local printer as they assured us that their setup was the same standard that the overseas printer uses. They said the sample sheet they printed for us had marks on the edges. Supposedly, once we had everything matching up right with the local printer, we could mail the printed sheet here to the overseas printer and their system would put in the sheet with its colors on the edges and know exactly what we wanted. Heck, if I know. I'm picking this up as I go along.
    By your post, it sounds like we have introduced an unnecessary variable (this local printer) and should just cut them out of the process and deal directly with the overseas printer. The challenge is that the next step is for them to make a sample game for us, and at $1,000 a sample game, it's going to get crazy expensive if we have to go through several samples. I'll see if they can just run a single sheet of cards as a test run like you suggested.
    If the overseas printer sheet or sample game comes up with the muted color problem still, what steps happen next. I ask because I'm used to solving the issues and don't understand how to solve this one if it comes up again. Do I just tell them to "make it more vibrant" and they work their magic as professional printers, or is the expectation that I'm to go through each of our many illustrations and graphic designs and over-saturate them myself? I suppose we can cross that bridge when we get to it. It's just hard to work for 18 months on this game getting everything just right and now see this color issue that is out my hands that I cannot solve.
    For color space, I think I understand you. Most of our art is RGB.Our Proof Setup is "CMYK - US SWOP v2".
    Thanks again for the information.
    Tom

  • HELP: subscription services for automatic printing

    Months ago, I opted to have "useful" documents automatically print to my HP Photosmart ePrint wirless printer. (These documents were subscription-based and I remember "tick-marking" the doc's I wanted to receive automatically... e.g. coloring pages for kids, recipes, coupons, etc.) NOW, I can not locate WHERE I subscribed to this service or how to STOP the AUTOMATIC PRINTING. This service is costing us hundreds of dollars monthly in reams of paper and ink cartridges. We have been inundated with page after page of "useless" print jobs and despite our recycling efforts, it has become a real problem.
    Please help.  (I have looked at settings to change on iCloud, ePrint, smart web printing...but have not found the magic page yet!)

    Hi,
    Be sure to follow the guidelines below to pause or cancel a scheduled delivery print app subscription:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&tmp_task=setupCategory&cc=us&dlc=en&lc...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Help needed for Auto-save functionality on appraisal bsp (HAP_DOCUMENT)..

    BSP -> HAP_DOCUMENT.
    I browsed through some threads and found out the code for this, but wanted to know which page/controller method I should write in my code. This functionality is required in both Manager page and in Employee page.. Could someone help me on this, it would be very helpful...

    hi ,
    the probelm with adobe (pdf) only(.i.e. pdf attachments are damaged or something) so, check the below links to get more info regrding above error...
    http://www.computing.net/answers/windows-xp/pdf-error-acrobat-could-not-open/118542.html
    http://forum.planetpdf.com/wb/default.asp?action=9&fid=6&read=62004
    http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=6911
    thnx
    suriya

Maybe you are looking for