HELP: PCR using AAU** can not count   absence days that less than a day

Hi, experts
I  have  customized a  PCR using AAU**
But it  can not count  absence days that less than a day which is maintained  in  IT 2001 ,
such as  unpaid leave. However it can correctly  count  absence days that  last  one  day  or above .
The issue is so strange for me, so please give me some advice.
Thanks a lot !
Morgan  from  Shanghai, China
2011-6-10

Morgan
1 alternative approach is as follows:
Step 1: Ensure your absence type have already been mapped to an absence valuation rule
Step 2: In your absence valuation rule, (goto SM30 > V_t554c), assign a new wage type to capture the number of days
             The wage type in step 2 should be created such that its attributes is to help your capture number of days of your unpaid
             absence type when it is evaluated by your payroll schema
Final Step: You should be able to capture half day absences with such a wage type when you run your payroll calculations
Should you need to utilize such a wage type for subsequent calculation processing in your payroll schema, you may have to develop your own customer payroll calculation rules to do so

Similar Messages

  • Can someone please help a friend of mine get a permanent registration key (not a trial key that expires in 30 days) to replace his lost registration key for Adobe Photoshop CS2? His previous hard drive crashed and he no longer has his registration key. Th

    Can someone please help a friend of mine get a permanent registration key (not a trial key that expires in 30 days) to replace his lost registration key for Adobe Photoshop CS2? His previous hard drive crashed and he no longer has his registration key. This is vital for his wedding business.

    Thanks to everyone for the tips on my CS2 question. It turns out in the end it was some plug-in filter software that was causing the glitch, not a lack of an Adobe registration key. As for why he still uses CS2, it does the job for him, so that's all he needs.

  • Asked to reboot to complete install stuck, will not go away, can not use Firefox, can not uninstall, windows based

    asked to reboot to complete install stuck, will not go away, can not use Firefox, can not uninstall, windows based
    I chose to delay reboot
    Rebooted later
    When trying to use Firefox it ask for reboot
    Stuck in a loop

    I thought I would copy your other post ([/questions/887645] ) <br/>
    |
    Let me rephrase in question.
    locking as a duplicate - https://support.mozilla.com/en-US/questions/88761 - please edit your original question instead of starting a new thread <br/>|<br/>
    I installed Firefox 6.0.2 on a Windows Server 2003 box. This box is a terminal server with 9 users that are going to use Firefox. The other users are going to use IE. When asked to reboot now or later, I chose Later. After sometime I rebooted, the message "you need to reboot in order to complete the install" reappears. Over and over again. Can not uninstall (same message) Can not open Firefox (same message) Many reboots using various users, the same results.
    Help!
    |
    The question appears to relate more to the OS than be a firefox problem, but as I have never used Windows Server 2003, I am unable to help.

  • TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    I have just created this account to tell you that nothing would change if you restored your phone.
    The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
    Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
    Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
    So IMO, it's not what you should do to erase and restore your phone.
    Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
    I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
    And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • The condition record for use B can not be displayed

    Hi gururs,
    What does this message (number : VE896 ) mean ?
    How to make it desapear ?
    P.S : it's about output type for purchase orders.
    This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
    Regards,
    Bahia.

    Hi
    It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
    For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
    Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
    Thanks

  • Help!! I can not find vrml api

    help!! I can not find vrml api
    I find day and hour.
    and find nothing
    who can help me
    email [email protected]
    thanks

    VRML API??
    Which do you mean?
    1) Javadoc API for old VRML Loader
    2) Javadoc API for Xj3D VRML Loader
    3) Specification for VRML
    4) Something else??
    Regards
    Nikolai

  • HT5312 algokar Dec 26, 2013 2:11 AM Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety   I can not buy any program that I forgot to ask him answer safety   Please help and send me a re-liquefaction a

    Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety
    I can not buy any program that I forgot to ask him answer safety
    Please help and send me a re-liquefaction answer to the same email

    1)  Apple ID: All about Apple ID security questions
    If necessary
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    3)  Or Email Here  >  Apple  Support  iTunes Store  Contact

  • I can not STOP THE MUSIC that is currently playing.

    I can not STOP THE MUSIC that is currently playing  Looking for a music app or a way to let me stop the music that is playing. I have asked this over and over all over the internet and no one has an answer. I enjoy my music for a while but when it is time to STOP THE MUSIC I have found but one way - Turn off or power down the device. This is so annoying I have stopped playing and stopped purchasing any and all music of any type. If I can not find a way to do so I will remove all music from my devices until I may hear of how to STOP THE MUSIC. I have seen it is done on Android devices but no Apple devices. If there proves to never be a way to STOP THE MUSIC I will surely sell all 5 of my iPhones, iPads and iPad Minis and finally give up on Apple ever truly caring about their users.

    Wwell, maybe it is just me. I have been using and have bought 7 Apple devices just over the past 3-5 years. Having supported, programmed, configured and taught college level courses for MS based and super computer hardware and software configurations for almost 20 years I am apparently ignorant of differential operations. Previously I had 5 choices on any hardware or software when playing anything like music, video, DVDs or anything similar. I had 'Play' 'Fast Forward' 'Fast Rewind' 'Pause'  a n d  'STOP'. Perhaps Apple has found the STOP unnecessary but I thoro enjoyed knowing whatever I was playing had STOPped and could not continue unless I chose to go back to the program or equipment and chose any of the 5 choices except STOP again since I could not STOP a STOP. As I said perhaps I need to reconsider my choices and obvious ignorance. Thanks for all the help.

  • When i go to unistall i get, this pack package can not be open.Verify that the pack package exists a

    When i go to unistall i get, this pack package can not be open.Verify
    that the pack package exists and that u can acess it.Or contact the application
    vendor, to verify that this is a valid windows installer patch package.

    I am using a new hp laptop that is running windows 7

  • I have a new ipad4. I can not open e-mails that have an attachment that ends in WMV. Is there a solution? Thanks.

    I have a new ipad4. I can not open e-mails that have an attachment that ends in WMV. Is there a solution to this? Thanks.

    WMV is an unsupported format on Ipad.
    Here is a good discussion to read. an dit may help you decide what to do
    https://discussions.apple.com/thread/3721087?start=0&tstart=0
    Cheers

  • I can not download 19 songs that I recently downloaded it is telling me that my device is not authorized.  I have had this nano for many years and never had a problem downloading songs until now. I have even went as far as to restore the nano and it still

    I can not download 19 songs that I recently purchased on my laptop.  I am getting the message that my Nano is not an authorized device.  Even though I have had it for years and it has many songs downloaded from my laptop.  I even decided to do the restore and it is still saying that the 19 songs can not be downloaded to my nano.  I did recently upgrade my window's 7 version.  Maybe this has created the problem. 

    Yes, the upgrade is the likely cause. 
    First you should try to deauthorize your computer/iTunes library before attempting to authorize it again.  To do this, click the Store drop down menu in iTunes and choose Deauthorize this Computer.  Then enter in your iTunes account credentials.
    When it has finished, choose Store -> Authorize this Computer and again enter in your Apple ID account credentials. 
    Finally, try resyncing your Nano to see if that makes a difference.
    B-rock

  • MY new Ipod Nano does not hold a charge.  I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time.  I drains to the red line in less than 2 days.  My husband's nano will last a week this way.

    MY new Ipod Nano does not hold a charge.  I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time.  I drains to the red line in less than 2 days.  My husband's nano will last a week this way.  I thought it drained because of looking at photos, so I quit looking at them and it made no difference.  Am I doing something incorrectly to cause this short battery life?

    You are still under warranty if your iPod is "new."  Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP.  Whichever is more convenient for you.

  • Using Numbers, can I calculate the date that will be eg 45 days ahead of a given date?

    Using Numbers, can I calculate the date that will be eg 45 days ahead of a given date?

    MWB,
    Certainly. Let's say that your given date is in B2. The date 45 days earlier can be found with:
    =B2 – 45.
    Almost seems too simple.
    Jerry

  • I can not edit the form that I am filling in

    I can not edit the form that I am filling out. I saved it to Desktop and was allowed to fill it in. But I can not erase some words that I want to change.

    Are the words you want to change in form fields that you previously typed in?

Maybe you are looking for

  • Is it possible to search for keywords in an XML file?

    Hey all, I'm currently searching for ways to count the number of pre-defined keywords in an XML file. An example would be trying to find how many times "war" is mentioned in a news networks RSS feed <title></title> and adding it to a variable. I've f

  • Unsure of proper configuration for SF300-24 & router

    Hello, Our company lost a switch and replaced it with a SF300-24.  The other components are a Westell modem and an Amped Wireless R10000G router. The current configuration has the Westell DLS modem going into the R10000G router, the router is the DHC

  • Can I export photo's from my MacBook Pro to My Ipad 2

    Can I export photo's from my MacBook Pro to My Ipad 2.

  • Error in installation database in Windows 2003 server 64 bits

    Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 9.2.6 in a machine that has Windows 2003 Server 64 bits . On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546

  • Iphone 6 plus No Volume

    Hello, I have a sound issue and don't know what happened. Please help! My iPhone 6 Plus has no volume, It stays in headphone mode with I try to turn up volume with external controls. I have sound at all unless I have headphones connected. I have to u