Help - Phone Name Display

Hello,
I am trying to do this setup for a user:
1. Since no remaining DIDs available, set the phone to use the main number extension.
2. User needs internal extension.
3. When user picks up the recevier, they should be able to dial out without pressing any buttons except phone number.
4. Need to set display name on phone.
Not sure how to acheive this.
I can set the main extension on the phone as the first button, but then phone shows no name, as the main extension has no name set.
If I create an external extension and assign it to button 1, phone shows name, but user cannot dial out, as no matching DID exists.
What should I do?
I thought about doing an outgoing translation for those new extensions to use the main extension number, but not sure how to do that, or even if that would work. Calls going out do not need to show users internal extension, and the users do not need to have direct incoming calls to those extensions.

What is your setup? are you using CUCM or CCME? You can use external number mask with CUCM and use translation rules for ccme...
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"

Similar Messages

  • Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name.

    Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name. Hard to know who is calling/texting! A few times I've tapped on the text message icon and I can actually watch as the conversations turn from showing just numbers to the contact names. Same thing when looking at call history and voice mail- sometimes it shows numbers and then I'll go back and the contacts will be back. So frustrating!

    boomer1630 wrote:
    - i have a Samsung S3)
    -I have tried using *228 to update.
    You don't dial *228 to update the Preferred Roaming List on 4G phones; I"m surprised the call went through.  The PRL updates are handled by the SIM card. 
    Try this and see if it helps:  turn off the phone, remove the SIM card, and wait a few minutes.  Then re-insert the SIM card, turn the phone back on, and give the phone a few minutes to re-establish a network connection.

  • My phone keeps displaying a white screen with the apple, then occasionally flicks to a blue screen, but won't turn on! HELP!!

    My phone keeps displaying a white screen with the apple, then occasionally flicks to a blue screen, but won't turn on! HELP!! I have had it on charge all day and have tried plugging it in to my computer to sync.

    Restore your software using iTunes.
    Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.
    You should be able to restore your backup file after this procedure. If the problem comes back, you either have corruption in your backup file, or a serious hardware problem that should be looked at by a tech at the Genius Bar (make an appointment first).

  • "My Music" app .. song name displayed in error

    Hi,
    I have a C1-01. I have stored some mp3s on the memory card, and I checked with an ID3 editor on my PC, they have their ID3 tags correct. But in the "My Music" app on the phone, when I go to "All Songs", many songs have their name displayed in error (they have extra information that I deleted from their ID3 tag). Eg: I have changed the "title" field of a song to say "Welcome", but in the song list, it is displayed as "Welcome - mp3albums.net". I checked with the ID3 editor software on my computer, the song has just "Welcome" for its title field. The music player on the phone is picking up the extra information from I don't know where. I updated the music library on the phone, it doesn't help. Switched off the phone, removed the battery, waited for a few minutes, switched on, same problem. Deleted temp files on the memory card, and the .trash folder on the card, same problem.  Any ideas?
    Also, is it possible to change the font size in the music player to extra small font?
    (My phone has the latest software update, version 5.50)
    Thanks.

    There are several versions of ID3, did you change ID3v1? or V2? what editor do you use anyway? I've found mp3tag to always be correct
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • E71 - SUDDENLY: No Caller Name Displays!

    Sometime, within a day or so following my first first sync (using Nokia PC Sync) between my E71and Lotus Organizer, I noticed that NAMES for incoming and missed calls from callers already in my contacts no longer display. Only the numbers. Names (per my contacts list) did display before I did the sync to Organizer. Calls dialed from the contact list still show up as names in the log -- however, the same number dialed from the missed calls list or directly from the screen does not resolve to a name. Only a number shows.
    I'm really perplexed about this, and highly annoyed.
    1) The numbers are NOT/NOT duplicated anywhere in my contacts, and I have NO contacts saved to my SIM card. NONE.
    2) Deleting an entry and then creating a new one from the missed call list (using the same number and name for the new entry) doesn't help. Still no name displayed.
    3) I've noticed VOICE TAGS which I don't ever recall seeing before I synced - maybe they were there, but I don't recall them. And those little pacman icons do rather catch one's eye.
    4) Numbers are not oddly formatted, and in any event, they've not been changed. But something has certainly changed.
    I've read the postings on this problem, and the only hope seems to be a complete deletion of my phone-based contacts, with a restore via PC--> Phone from my Organizer contacts list. I'm reluctant to try this, as the problem began with the sync between the two.
    This is really pretty absurd.
    Any help here, please?

    I agree - it certainly looks like some sort of refresh bug or perhaps some sort of bug linking names for contacts from a particular account.
    I was having problems resetting my password for my Exchange account so I finally just deleted the whole account and re-added it. When I re-added it, I left my Exchange contacts disabled. A few hours later, I was switching back & forth between my Recent Calls and Favorites (accidentally) and suddenly the names for my Favs were replaced by #'s only. Ditto with my Recents.
    After reading your post, I re-enabled the Contacts for my Exchange account and let them sync. Switching back & forth from my Favs & Recents over the next few minutes I began to see my names come back.
    I suppose y'all who are having problems could try to delete your account that many of your contacts are linked to and then re-add and allow sync to happen. No guarantees, but it seemed to work for me.

  • Help on output Display

    Help on output Display
    Thanks in Advance
    ID ROUTE STRT_NAME BEGIN_DESCRIPTION END_DESCRIPTION OVERLAP BEG_MP END_MP Hierarchy
    100899 CR ELM AVE EXT FUERA BUSH RD ELM AVE 1551 0 0.46 3
    100899 CR ELM AVE ELM AVE RT 910A 1551 0.46 0.95 3
    100899 CR ELM AVE ELM AVE DELMAR BYPASS 1551 0.46 0.83 3
    100290 NY32 ELM AVE EXT RT 910A FEURA BUSH RD ELM AVE 1551 16.85 17.31 1
    100290 NY32 ELM AVE ELM AVE DELMAR BYPASS 1551 17.31 17.68 1
    My output will be Based on Hierarchy Max valuewhich is "3"
    ID = Hierarchy Max value 3 =(100899)
    ROUTE = Hierarchy Min Value which is "NY32"
    STRT NAME = Hierarchy Max value (3) and Min of Beg_MP of Hierarchy Max value(3) = ELM AVE EXT
    Begin Description = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) = FUERA BUSH RD
    End_description =Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = RT 910A
    Beg_MP = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) =0
    end_mp = Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = 0.95
    ID ROUTE STRT_NAME BEGIN_DESCRIPTION END_DESCRIPTION BEG_MP END_MP
    100899 NY32 ELM AVE EXT FUERA BUSH RD RT 910A 0 0.95

    CREATE TABLE TABLE_query(ID NUMBER,ROUTE VARCHAR2(30),STR_NAME VARCHAR2(30), BEGIN_DESCRIPTION VARCHAR2(300),END_DESCRIPTION VARCHAR2(300),BEG_MP NUMBER,END_MP NUMBER,HIERARCHY NUMBER,overlap number);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100899,'CR','ELM AVE EXT','FUERA BUSH RD','ELM AVE',0,0.46,3,1551);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100899,'CR','ELM AVE','ELM AVE','DELMAR BYPASS',0.46,0.95,3,1551);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100899,'CR','ELM AVE','ELM AVE','DELMAR BYPASS',0.46,0.83,3,1551);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100290,'NY32','ELM AVE EXT','RT 910A FEURA BUSH RD','ELM AVE',16.85,17.31,1,1551);
    INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
    values(100290,'NY32','ELM AVE','ELM AVE','DELMAR BYPASS',17.31,17.68,1,1551);
    ID     ROUTE     STR_NAME     BEGIN_DESCRIPTION     END_DESCRIPTION     BEG_MP     END_MP     HIERARCHY     OVERLAP
    100899     CR     ELM AVE EXT     FUERA BUSH RD     ELM AVE     0     0.46     3     1551
    100899     CR     ELM AVE     ELM AVE     DELMAR BYPASS     0.46     0.95     3     1551
    100899     CR     ELM AVE     ELM AVE     DELMAR BYPASS     0.46     0.83     3     1551
    100290     NY32     ELM AVE EXT     RT 910A FEURA BUSH RD     ELM AVE     16.85     17.31     1     1551
    100290     NY32     ELM AVE     ELM AVE     DELMAR BYPASS     17.31     17.68     1     1551
    My output will be Based on Hierarchy Max valuewhich is "3"                         
    ID = Hierarchy Max value 3 =(100899)                                        
    ROUTE = Hierarchy Min Value which is "NY32"                                        
    STRT NAME = Hierarchy Max value (3) and Min of Beg_MP of Hierarchy Max value(3) = ELM AVE EXT                                        
    Begin Description = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) = FUERA BUSH RD                                        
    End_description =Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = DELMAR BYPASS                                        
    Beg_MP = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) =0                                        
    end_mp = Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = 0.95                                        
    ID     ROUTE     STRT_NAME     BEGIN_DESCRIPTION     END_DESCRIPTION     BEG_MP     END_MP          
    100899     NY32     ELM AVE EXT     FUERA BUSH RD     DELMAR BYPASS     0     0.95          
    I figured out how to get id,beg_mp and end_mp
    Can anyone help me getting the rest of data coumns please
    --route,str_name,begin_description,end_description,beg_mp,end_mp,hierarchy,
    select distinct max(id) keep (dense_rank last order by hierarchy) over (partition by overlap) ,
    min(beg_mp) keep (dense_rank last order by hierarchy) over (partition by overlap) beg_mp,
         max(end_mp) keep (dense_rank last order by hierarchy) over (partition by overlap) end_mp                              
    from table_query

  • How to find the Actual Responder Name Displayed in a Notification

    Hi,
    Where are the details of the Actual Responder Details stored in the case of the below scenario
    If a notification for one user was closed by another user through access to the first user's worklist, the name of the second user, who actually took the action, is displayed as the responder.
    I am only able to find the Original Recipeint username in the wf_notifications table.
    But where will the details of the Actual Responder name displayed in the notification be stored.
    When I use the "wf_notification.Responder" function, I get the Original Recipeint username of the user but not the one who acted on the notification. Is there ANY way by which I can get the Actual responder user name who acted on the notification
    select responder from wf_notifications where notification_id = <nid> also gives me the Original Recipeint username of the user but not the one who acted on the notification
    Please help.
    Regards,
    Kalyan

    Hi Alejandro,
    Thanks for the response.
    Both the RESPONDER and the ORIGINAL_RECIPIENT Column show the same username.
    The User who is approving the Notifications is having the access to the Worklist of the Original User through proxy.
    He is the proxy of the Original User.
    I think WF_ENGINE.context_proxy will store the actual user name who responds to the notification. But where does this actually store , i am not able to get.
    We Need to find out the both the user names (one who received the notification , and the one who has approved it (in our case it is the user who has been set as a proxy and has access to the original user's work list) for the closed notifications.
    In the Work flow Notification , it shows both the Original Recipeint and also the Actual Responder Name.
    Regards,
    Kalyan

  • My phone is displaying itunes connection and I am not at home

    I need help i am at hospital with my sister and will be here for about 10 hrs. my phone is displaying itunes connection and usb. I need it to work to get ahold of my daughter .HELP!!!

    Unfortunately if it's showing the iTunes symbol and a cable then it will need to be connected to a computer's iTunes in order to reset the phone, and to then restore/resync your content to it

  • No Name Display under Lock Mode

    When my Blackberry Curve 8900 is locked and I get an incoming call, I do not see the incoming caller's name displayed. I just see the number. In the past I did not face this issue. Is there some setting I need to change on the instrument or I need help from a Blackberry tech person.

    Apparently it's something which needs changing on the Bes server and not the handset, assuming you've not got your contacts encrypted.

  • Change Name displayed on Forum

    Made a mistake while entering and now find no way to change the name displayed next to the picture on my posts.

    I will ask for help for you on this.
    ****Please click on Accept As Solution if a suggestion solves your problem. That will help another person facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • The recipient name displayed on my received emails is incorrect

    For the last week or so, all the emails that I have received to my account have the name of one of my friends displayed as the recipient, rather than my name in the address panel at the top. When I hover my mouse over the recipient name, both my friend's email details and my email details can be seen.
    When I forward the email with the incorrect name displayed as recipient, the incorrect name does not appear. However, I am most concerned at the potential security and nuisance possibilities for my friend (and for me by the way). There is obviously something in the display settings that has gone awry, but I have searched the email account set up for a solution and cannot solve the problem.
    Can anyone help, please?

    My problem has not been solved by removing my name from my friend's address card. The recipient information now includes my email address, but is still directed to my friend's name.
    I have checked in my address book, as suggested, to see which entry is designated as me, and the only email entry against my name is my work email, not my personal email address, which is the one with the problem.
    I have tried to add another sender to my address book, but the function seems not to be responding to my request. Any advice?

  • Lumia 900 doesn't support Name Display?

    I was talking with the Rogers representative here in Canada, and he says the Lumia 900 doesn't support Name Display (as opposed to Caller ID).  Is this true?  Could it be possibly added via firmware changes?

    ProfJulie wrote:Have you seen this thread?  Seems like Rogers may need to make a change in their system on their end:
    Yup.. but this is slightly different.
    Here, Caller ID is working fine (I can see the phone# of the caller, and if they are in my Contacts list, then the name/image is displayed) but if it is someone who is not in my Contacts list, then with Name Display enabled, their name (not number) should display on the phone (if they allow it, which most businesses do).
    On my account, Name Display is enabled and works fine on a Samsung Focus S. On my Lumia 900 however, I never see names -- only the caller's phone number.  According to Rogers, Name Display doesn't work on a Lumia 900.
    I can attest the Rogers has the account set up properly, since it works on the Samsung Focus S.

  • Bad name displayed due to call-forward

    Hi,
    We encountered an issue with user name and user phone number displayed.
    Exemple:
    the extension 2000 is assigned to the user USER-A
    the extension 1000 is assigned to the user USER-B
    I configure a call-forward 2000 (USER-A) --> 1000 (USER-B).
    If a USER-C try to call the 2000, he will be redirected to the 1000.
    Everything is alright.
    But when the USER-A will call the USER-C, USER-C will see on the SPA942 display screen "2000 USER-B" instead of "2000 USER-A".
    It seems that SPA942 keep in cache information of communication. Is there a possibility to erase this cache without making a factory reset?

    Our telephony service provider explain to us that the issue come from the internal memory of the phone.
    When we reset the phone to factory default settings, the name are displayed correctly since the next call forward.
    This is the only way we've found to resolve the issue but we have to reconfigure the phone each time.

  • N95 change phone name

    Hi there,
    We have 2 x N95's and want to sync them independently in PC Suite how can we change each phones names as currently they both have the same name, Nokia N95.
    We are syncing with USB cable and have changed the name in BT and wireless but still each phone is named Nokia N95 can we change the name if so how.
    Many thanks, Tim.

    Hi tare
    In previous versions of PC Suite it would differentiate by calling one say Nokia 5100(1) and the other Nokia 5100(2).
    Please be aware that your post will not elicit a response from Nokia. Use "Contact us" at top right of the screen to bring this issue to Nokia's attention. The more times an issue is reported the further up it moves in "possible action" table.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • N95 Changing phone name

    We have 2 x N95's and want to sync them independently in PC Suite how can we change each phones names as currently they both have the same name, Nokia N95.
    We are syncing with USB cable and have changed the name in BT and wireless but still each phone is named Nokia N95 can we change the name if so how.
    Many thanks, Tim.

    Hi tare
    In previous versions of PC Suite it would differentiate by calling one say Nokia 5100(1) and the other Nokia 5100(2).
    Please be aware that your post will not elicit a response from Nokia. Use "Contact us" at top right of the screen to bring this issue to Nokia's attention. The more times an issue is reported the further up it moves in "possible action" table.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for