Help Pleas Light dont go off

hello,
im frome germany and my iphone 4 has a big problem.
The LED light is on and the lights go never off.
i have recovery the iphone i have made the new ios 4.2 but the light goes not off.
when i shut my iphone off,the lights is on too.
im very very angry about this.
PLEAS HELP ME
ans sorry for my bad english.

Is auto lock set for never?
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

Similar Messages

  • Keyboard lights never turn off

    Hello,
    After succesfully installing boot camp and the drivers as well I noticed that the keyboard lights stay on. I click the F5 button which is suppose to turn them down and eventually off and it does that but they dont turn off they just dim down, they are one click away from turning off but I cant click it again because there are no more bars to remove.
    Please help.

    Try resetting your SMC:
    http://http://support.apple.com/kb/HT3964
    Ciao.

  • My iphone 4s flash light doesn't off

    My iphone 4s flash light doesn't off. Its now over a week. Help needed!!

    Open your iPhone and release the camera module. Use google to figure out how. In my situation the red marked area below sticked to the back of the iPhone. I grabbed it and tapped it carefully. I also isolated the point by placing a small piece of isolation over it (see pictures below). After this te light stays off and all camera or flashlight apps are working fine.
    Thanks and have a good time.

  • Red light wont turn off

    I just got a BB 8900 and everytime I recieve a message the led light blinks but when I check the message it goes solid and then wont shut off. I can still function the phone but I really wont that light to go off because its annoying...any suggestions? 

    Try to reset your handset by just removing the battery and reinsert.
    If this does not fix your issue, reload handheld software: http://www.blackberry.com/btsc/KB11320
    If someone give you helpful hints, please click on Kudos.
    If you issue is resolved, mark Accept Solution next to the resolution post.
    Feel free to search www.blackberry.com/btsc to find your answers.

  • HP 7800 show green light and got off every 5 second

    HP 7800 small form factor - this morining i powered on my system it show red flash light and got off. I replaced the power supply problem was solved it dosen;t show red light but now it show green ligt for 5 sec and restarted , i have unlug all cables and plug them in but all invain. Please help me out . 

    Hello @rana-minhas,
    I understand that after replacing your power supply on your HP Compaq dc7800 Small Form Factor PC it will not power up properly and shows  a green light for 5 seconds before restarting. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My Ipod doesn't work ... I have just the apple light on and off

    My Ipod doesn't work ... I have just the apple light on and off
    can you help me please

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • SOME PLEASE HELP ME I DONT KNOW WHAT TO DO.....(M-audio)

    SOME PLEASE HELP ME I DONT KNOW WHAT TO DO..... SO I RECIEVED MY M-AUDIO MOBILEPRE SOUNDCARD. I CONNECTED THE USB TO MY MACBOOK (2009-2010) AND I CAN CHANGE MY COMPUTERS OUTPUT TO THE M-AUDIO MOBILEPRE... SO IT SHOWS ITS CONNECTED. NEXT I DOWNLOAD THE M-AUDIO MOBILEPRE DRIVER IT CAME WITH IN THE BOX AFTER THAT IT SHOWS ITS CONNECTED ALL GOOD....BUT WHEN I DOWNLOAD THE DRIVER "M-AUDIO MOBILE PRE USB" I PLUG IN MY SPEAKERS AND IT SAYS "UNABLE TO CONNECT TO M-AUDIO MOBILEPRE. IS IT TURNED ON?" AND ITS OBVIOUSLY TURNED ON AND CONNECTED......SO MY COMPUTER READS THE SOUNDCARD BUT IT WONT LET ME CONFIGURE THE SOUND SETTINGS IN THE "M-AUDIO MOBILEPRE USB" DRIVER ....WTH IS M-AUDIO MOBILEPRE THE SAME THING AS M-AUDIO MOBILEPRE USB???? IF SO HOW DO I CONFIGURE THE SOUND SETTINGS IN MY COMPUTER!!!

    Contact M-Audio support, I suspect they will have further information that you need rather than this forum.

  • HELP! Cannot copy files off Time Capsule

    I have a 1TB Time Capsule (DualBand) that I use like a NAS (network attached storage). Time Machine is disabled, but I manually copy files on the Time Capsule's disk when I want to back them up, and share them with other computers in my house.
    I am trying to copy all of the files of the Time Capsule to a 2 TB Firewire 800 drive connected to my MacBook Pro, but I'm having a problem. About half-way through the the copy process (which is estimated to be an over-night ordeal) the Time Capsule is disconnected and I get the error:
    +The Finder cannot complete the operation because some data+
    +in "" could not be read or written.+
    +(Error code -36)+
    Also, the disconnected Time Capsule is still visible in the SHARED portion of my Finder's sidebar, but it is impossible to connect to the disk again, unless I unplug the Time Capsule and power it back up.
    Every time I try the process, I receive the same error, and have to restart my Time Capsule again. Could someone please help me get my data off my Time Capsule? I would prefer not to have to resort to ripping it open, so I can put the drive into my USB Toaster.
    NOTE: I've tried repairing disk permissions on my MBP and repairing disk on my 2TB external drive. I've found no way to do any of these kinds of things on the Time Capsule's internal disk.

    ashwinraj wrote:
    I have a 1TB Time Capsule (DualBand) that I use like a NAS (network attached storage). Time Machine is disabled, but I manually copy files on the Time Capsule's disk when I want to back them up, and share them with other computers in my house.
    I am trying to copy all of the files of the Time Capsule to a 2 TB Firewire 800 drive connected to my MacBook Pro, but I'm having a problem. About half-way through the the copy process (which is estimated to be an over-night ordeal) the Time Capsule is disconnected and I get the error:
    +The Finder cannot complete the operation because some data+
    +in "" could not be read or written.+
    +(Error code -36)+
    I don't have a direct solution to your disconnection problem, but if your 2 TB drive has a USB port, you may be able to connect it to your Time Capsule and use the "Archive" function (in AirPort Utility's Disks/Disks panel) to copy that data from the Time Capsule disk.

  • I can no longer type messages.  I have tried deleting to see if I have too many saves messages.  That did not help.  I also cut off the phone and turned back on.  That did not help.  Ideas?

    I can no longer type messages.  I have tried deleting to see if I have too many saves messages.  That did not help.  I also cut off the phone and turned back on.  That did not help.  Ideas?

    http://www.bubblews.com/news/874646-apple-is-having-issues

  • My phone suddly switched off and now its not switching on can any one help me when it swithch off my phone battery was full.

    my phone suddly switched off and now its not switching on can any one help me when it swithch off my phone battery was full.

    Which apps do you open acouse iphone switched off? You can try to reset iPhone.

  • My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help, My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help

    My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help, My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help
    Im on ipod 6.1.3 non jaillbroken
    and i have not bought songs from itunes store

    What is the wording of the error message?
    When you say download do yo mean:
    - directly downloading from iTunes?
    - Syncing to computer?

  • I don't always hear or feel my phone when I'm in my workshop. Is there an app that can ring a bell or flash a light on and off when I receive a call or text?

    I don't always hear or feel my phone when I'm in my workshop. Is there an app that can ring a bell or flash a light on and off when I receive a call or text?

    There are a number of hardware devices that you may want to look at. Some of them require that the iPhone be placed into a "base station" in order to work. Following is one set of possibilities: http://www.harriscomm.com/index.php/equipment/cell-phones-accessories/cell-phone -accessories/loud-ringers.html
    If you do an internet search for something like "ringer for cell phone in home" you will find a variety of others.

  • My 4s camera flash light wont turn off and camera is not working

    my 4s camera flash light wont turn off and camera is not working

    Hello there, Shantae2231.
    You may just want to try resetting your phone per the instructions in this Knowledge Base article (There is no data loss by performing this step):
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

    My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

    Hi HARISH INDIA,
    That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information. 
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT201263
    Take it easy,
    -Norm G. 

  • Help me find my powered off iphone

    please help me find my powered off iphone

    The phone can't be tracked when powered off.  It must be powered on and have an active connection to the internet to be tracked.

Maybe you are looking for

  • How to use globally defined variable in SQ01

    Hi, I have created one InfoSet using SQ02. In that I have declared some Additional Fields. These Additional Fields are of type String , so I have declared thses fields in DATA Section of Code of Infoset as it is not possible to define a custom field

  • Is it possible Bridge ruins images while making thumbnails?

    This morning I was reorganizing images. I use Bridge to check the files. I noticed when Bridge was making CR2 thumbnails several of them appeared stripped of some if not most of the pixels. I opened one image in Camera raw and became afraid the image

  • Message Bridge between WLS 6.1 sp3 and MQSeries 5.2

              Hi,           I'm really struggling with getting the Message Bridge working with Weblogic 6.1           sp3 and MQSeries 5.2. Currently I have both installed on the same Windows 2000           machine. First I'll pose some questions that I

  • Error during Check-In of SAP-JEE, SAP-BUILDT, SAP-JTECHS

    Hello, I'm configuring a NWDI track for ESS/MSS using the cookbook documentation. I'm using a NWDI 7.0 but the ESS/MSS is deployed in a J2EE 6.40 as it is linked to a backend ECC 5.0. Now, I'm stuck at the check-in step of the cookbook. I have the fo

  • Ipad air looses wifi

    mmy iPad Air looses connection often even though the signal is really strong and other devices stay connected? The latest iPad HW with the latest available SW.