Help please, can I run windows ME 4 a visio

Hi,
I was a proud owner of a zen touch until in went wrong. I'm still very happy with the creative mp3 players and was looking to get the vision M. However, I am using windows ME, Will it work at all with ME and if so will i lose any of the features?any advise would be great, but i cant aford to buy windows xp and a new mp3 player...
thanks rob?

It says right on the box and on the package requires Windows XP. The support for Windows ME/2000/98 is VERY limited to song transfers via Windows Media Player 9 ONLY. You will most likely recieve an "Easy CD" with your package, it is this cd that you would use to install the necessary software on Windows ME for it to work. But still its a waste of money if you want a new player with Windows ME support.

Similar Messages

Help Please: Can't run 1280 x 1024 after update (Solved)

My display has changed to 1024 x 768, and my monitor is not listed in gnome display settings. Was working fine up until only minutes ago. Display went to sleep while I was away and when I woke it the settings were changed.
What can I do?
Thank you. Brian
Edit:
After looking around I think my xorg.conf file changed.
When I re-run 'Xorg -configure' it returns an error stating that the number of screens detected does not match...
The current log file Xorg.0.log [1], an old log file Xorg.12.0.log [2], and the log from the configure command above Xorg.configure.log [3] can be viewed here.
The following are snippets of resolution section from [1] and [2].
Previously Working
[162994.695] (II) [drm] DRM interface version 1.4
[162994.699] (II) [drm] DRM open master succeeded.
[162994.699] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[162994.699] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[162994.699] (==) NOUVEAU(0): RGB weight 888
[162994.699] (==) NOUVEAU(0): Default visual is TrueColor
[162994.699] (==) NOUVEAU(0): Using HW cursor
[162994.699] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[162994.699] (==) NOUVEAU(0): Page flipping enabled
[162994.806] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[162994.920] (II) NOUVEAU(0): Output TV-1 has no monitor section
[162995.026] (II) NOUVEAU(0): EDID for output VGA-1
[162995.026] (II) NOUVEAU(0): Manufacturer: EPI Model: e784 Serial#: 5248
[162995.026] (II) NOUVEAU(0): Year: 2004 Week: 14
[162995.026] (II) NOUVEAU(0): EDID Version: 1.3
[162995.026] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[162995.026] (II) NOUVEAU(0): Sync: Separate
[162995.026] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[162995.026] (II) NOUVEAU(0): Gamma: 2.38
[162995.026] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[162995.026] (II) NOUVEAU(0): First detailed timing is preferred mode
[162995.026] (II) NOUVEAU(0): redX: 0.650 redY: 0.319 greenX: 0.300 greenY: 0.600
[162995.026] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.108 whiteX: 0.312 whiteY: 0.328
[162995.026] (II) NOUVEAU(0): Supported established timings:
[162995.026] (II) NOUVEAU(0): 720x400@70Hz
[162995.026] (II) NOUVEAU(0): 640x480@60Hz
[162995.026] (II) NOUVEAU(0): 640x480@67Hz
[162995.027] (II) NOUVEAU(0): 640x480@72Hz
[162995.027] (II) NOUVEAU(0): 640x480@75Hz
[162995.027] (II) NOUVEAU(0): 800x600@56Hz
[162995.027] (II) NOUVEAU(0): 800x600@60Hz
[162995.027] (II) NOUVEAU(0): 800x600@72Hz
[162995.027] (II) NOUVEAU(0): 800x600@75Hz
[162995.027] (II) NOUVEAU(0): 832x624@75Hz
[162995.027] (II) NOUVEAU(0): 1024x768@60Hz
[162995.027] (II) NOUVEAU(0): 1024x768@70Hz
[162995.027] (II) NOUVEAU(0): 1024x768@75Hz
[162995.027] (II) NOUVEAU(0): 1280x1024@75Hz
[162995.027] (II) NOUVEAU(0): Manufacturer's mask: 0
[162995.027] (II) NOUVEAU(0): Supported standard timings:
[162995.027] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
Currently Not Working
19.491] (II) [drm] DRM interface version 1.4
[ 19.491] (II) [drm] DRM open master succeeded.
[ 19.491] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[ 19.491] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 19.491] (==) NOUVEAU(0): RGB weight 888
[ 19.491] (==) NOUVEAU(0): Default visual is TrueColor
[ 19.491] (==) NOUVEAU(0): Using HW cursor
[ 19.491] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 19.491] (==) NOUVEAU(0): Page flipping enabled
[ 19.550] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 19.670] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 19.730] (II) NOUVEAU(0): EDID for output VGA-1
[ 19.730] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 19.730] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 19.850] (II) NOUVEAU(0): EDID for output TV-1
[ 19.850] (II) NOUVEAU(0): Output VGA-1 connected
[ 19.850] (II) NOUVEAU(0): Output TV-1 disconnected
[ 19.850] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 19.850] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 19.850] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.850] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 19.850] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 19.850] (==) NOUVEAU(0): DPI set to (96, 96)
Last edited by bsquared (2012-05-06 18:13:13)

[ 19.550] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 19.670] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 19.730] (II) NOUVEAU(0): EDID for output VGA-1
[ 19.730] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 19.730] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
With these, I'm not sure running "xrandr -s 1280x1024" will work.
I think you need to use something like:
Section "Monitor0"
Identifier "VGA-1"
Modeline "1280x1024_75.00" 138.75 1280 1368 1504 1728 1024 1027 1034 1072 -hsync +vsync
Option "PreferredMode" "1280x1024_75.00"
EndSection
Use the "official" modeline calculator to get the Modeline (refresh rates from the manufacturer website, I hope), restart X, and there you have it. It worked for someone once: https://bbs.archlinux.org/viewtopic.php?id=140496
Last edited by DSpider (2012-05-06 07:20:59)

Can I run window 8.1 pro on hp a450n

Can I run window 8.1 pro on hp a450n with upgrade 2gb ram.

According to the specs for your HP Pavilion a450n Desktop Computer, this model use an Intel Pentium 4 and is almost 10 years old. Please run the Windows 8 Upgrade Assistant or Windows 8.1 Upgrade Assistant to see if your computer is compatible with Windows 8 / 8.1
I tend to think your computer doesn't support some of the needed technologies to run Windows 8 / 8.1
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Mid-2009 MBP, 2.8Ghz Core 2 Duo, 4GB memory, NVIDIA GeForce 9600 512 MB can't run Windows 8?

I have a 17" mid-2009 MacBook Pro with a 2.8GHz Intel Core 2 Duo, 4GB memory, NVIDIA GeForce 9600M
GT 512MB. Recently upgraded to OS X MAvericks 10.9.4. I wish to run 3DS MAx Design using Boot CAmp.
The Boot Camp Assistant, downloading the Windows installers says my system can only run Windows 7. [The newly-opened Windows 8.1 disc is right here.] Can this be right? Might you please identify the weak point? Should I upgrade? Is the memory the reason? Is the assistant wrong? What should I do.
Using 3ds max, would it be wise to upgrade the memory in any case. When the correct Windows softyware is determined and installed, how large should I set the partition. Thank you for helping me.

Thanks, Kappy. Please, I'd read those system requirements before; I still don't understand where my system falls short. Both 7 and 8 stipulate a 1GHz processor. Graphics card I don't know the difference. So it's memory- I have insufficient accesible memory? If my purpose is to manipulate highly featured images, should I upgrade memory in any case. Does it make much difference whether it's 7 or 8? Some places I know my footing. Here, not. Step by step. Thanks!

Can i run windows in the background?

hi there
i have recently purchased a macbook pro 13" and i know that it is possible to split the hard disk to be able to install windows OS, but i was wondering if anyone knows if it is possible to leave windows running in the background and switch back to OSX?
the reason i want to try and do this is because i have a USB device for my fish tank that monitors several peramitors and uploads them to an online account so i can see what is going on in my fish tank, however it needs a local piece of software for it to be able to do this and at the minute this is only available for windows hence my question, im hoping i can get around it by spliting my mac in this way but it needs to be able to run in the background as a parralel system.
any help would be great.

Hey,
You can buy Virtual Machine apps such as VMware Fusion and Parallels Desktop for Mac and these will let you run Windows as a Virtual Machine (on top of Mac OS X). You can then run Windows programs as well as Mac ones.
If you need any more help, please ask
Connor

Lion (10.7.0): Into Smb share folder I can't run Windows executable (.exe)

Lion (10.7.0): Into Smb share folder I can't run Windows executable (.exe)
Window 7 Pro 64 response insufficient privilege.
Read and Write normal file don't have problem.
Before in OSX 10.6.8 don't have problem.
Help
Alessandro

Hi,
the problem is X permission than not replay on smb.
If manual set ".exe" X permission file run but when rebuild exe with compiler restore only "Read&Write permission"
Is possible use inheritance on smb (lion)?

Can I run Windows 8.1 using VirtualBox on my Macbook?

The system requirements for Windows 8.1 says that it needs "Microsoft DirectX 9 graphics device with WDDM driver". Can I run Windows 8.1 using VirtualBox on my Macbook? It's a late 2009 model with an NVIDIA GeForce 9400M 256 MB graphics card & 2 GB of RAM. (Do I need more RAM?)
Thanks!

While I can't answer to the BootCamp specification, I can state the use of Windows and Mac OS X in the MacBook will invite a need to upgrade the RAM; likely to the max it can use. Matching RAM of quality specs so the system will work. The specs are important, as details are everything.
You'd likely use Boot Camp to make a partition on the internal HDD, but then the overall capacity for Mac OS X could be compromised. When you remove a partition, you'd use BootCamp again, or you'd have to erase content in order to restore to original capacity. Disk Utility generally has a harder time with a BootCamp partition.
Good luck & happy computing!

On the mac mini 2011 how can I run windows 7 without the optical drive, On the mac mini 2011 how can I run windows 7 without the optical drive

On the mac mini 2011 how can I run windows 7pm bootcamp without an optical drive. I watch lots of football on sop cast and other such windows based programmes but can't work out how to do it.

Actually Windows can be installed and booted from an external drive if the drive is connected eSATA (external SATA), since the drive is treated as if it's an internal HDD. I used the same method previously to dual-boot from 2 different HDD instead of partitioning.
Most PC motherboards come with them as standard so it's pretty much plug and play but I don't recall seeing a recent Mac with eSATA connectivity though, so that might not be an option for you.

HT1846 The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

I would buy nothing less than Windows 7 64-bit Pro.
32-bit only addresses 3.5 GB RAM ... 2012 Macminis can hold 16 GB.
64-bit Home addresses 16 GB RAM.
64-bit Pro addresses 192 GB RAM and han an XP mode.
This is all about having a good version of Windows for future use. Yu can buy "Syem Builder" version of 64-bit Pro for $140.

Need help I can't install windows 7 to my SATA HD

need help I can't install windows 7 to my SATA hard drive, when it gets to the part of selecting a drive partition to install windows it tells me my hardware does not support booting to this disk check that the disk's controller is enabled in the bios settings, I can't find any AHCI mode to switch to and RAID also did not solve my problem, bios version 786F1 v01.04

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can you run windows 7 as vmware on mac or ipad

Can I run windows 7 on my Mac or use a iPad and use VMware on them.

You can run Windows on your Mac, but not on an iPad.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Help:How can I run the J2EE Client Application? Thanks

Help:How can I run the J2EE Client Application that will access the remote J2EE1.4 application server which runs on another host computer?
I have developped a stateles senterprise java bean name converter and deloyed it in the j2ee1.4 application server on the host machine A. The converterbean provides the remote home interface and remote interface. At the same time I have developped the j2ee application client named convertappclient. When I access the conveter bean at host computer A through the script 'appclient.bat' as 'appclient -client convertappclient.jar', the client can access the bean sucessfully. Now I want to access the bean through the script 'appclient.bat' at host computer B,what files should I copy from host computer A to host computer B;and what the command line should be like? Thanks!
The following are the code of the enterprise java bean and it's home interface .
The client code is also provided.
The enterprise java bean:
package converter;
import java.rmi.RemoteException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.math.*;
public class ConverterBean implements SessionBean {
BigDecimal yenRate = new BigDecimal("121.6000");
BigDecimal euroRate = new BigDecimal("0.0077");
public ConverterBean() {
public BigDecimal dollarToYen(BigDecimal dollars) {
BigDecimal result = dollars.multiply(yenRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public BigDecimal yenToEuro(BigDecimal yen) {
BigDecimal result = yen.multiply(euroRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public void ejbCreate() {
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext sc) {
The bean's remote home interface :
package converter;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
public interface ConverterHome extends EJBHome {
Converter create() throws RemoteException, CreateException;
The bean's remote interface:
package converter;
import javax.ejb.EJBObject;
import java.rmi.RemoteException;
import java.math.*;
public interface Converter extends EJBObject {
public BigDecimal dollarToYen(BigDecimal dollars) throws RemoteException;
public BigDecimal yenToEuro(BigDecimal yen) throws RemoteException;
The j2ee application client:
import converter.Converter;
import converter.ConverterHome;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.rmi.PortableRemoteObject;
import java.math.BigDecimal;
public class ConverterClient {
public static void main(String[] args) {
try {
Context initial = new InitialContext();
System.setProperty("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
System.setProperty("java.naming.provider.url","jnp://10.144.97.250:3700");
Context myEnv = (Context) initial.lookup("java:comp/env");
Object objref = myEnv.lookup("ejb/SimpleConverter");
ConverterHome home =
(ConverterHome) PortableRemoteObject.narrow(objref,
ConverterHome.class);
Converter currencyConverter = home.create();
BigDecimal param = new BigDecimal("100.00");
BigDecimal amount = currencyConverter.dollarToYen(param);
System.out.println(amount);
amount = currencyConverter.yenToEuro(param);
System.out.println(amount);
System.exit(0);
} catch (Exception ex) {
System.err.println("Caught an unexpected exception!");
ex.printStackTrace();
}

Surprisingly I find an upsurge in the number of posts with this same problem. I recently found a post which gave a nice link for this. Follow the steps and it should help:
http://docs.sun.com/source/819-0079/dgacc.html#wp1022105

With Mac OS 10.6.7 can I run windows XP?

I want to use Boot Camp to slipt my hard Drive so that I can run windows, but the only widows disks I own are XP and Vista but I have heard that with the OS 10.6.7 I can't run windows XP, which is what I really want.
So is it possible to use Boot Camp to run Windows XP with Mac OS 10.6.7?
btw I dont know if it matters but I have a Mac book Pro 13in with Core i7, 4GB memory, and 500GB hard Drive.

MacBook Pro 2011 now only supports and supplies drivers etc for Windows 7, not XP.
Probably due to all the changes needed to support Sandy Bridge processors, SATA3 and ThunderBolt.
if you have 2010 then yes.
And don't rule out using a VM - not good for games but can be for non-intensive apps.
And you probably want Windows 7 64-bit to use 4GB or more (and your MBP takes 8GB RAM, 16GB for 2011).
PS: This is regarding MacBook Pro, totally different from "Mac Pro"
MacBook Pro
http://www.apple.com/support/macbookpro - for specs manuals tutorials and articles
Forum for Boot Camp Support Discussion:
Boot Camp
Apple Boot Camp Support

Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

http://www.apple.com/support/bootcamp/

Can i run windows xp(no virtualization software) in my macbook pro retina 15 inch mid 2012 . all the bootcamp compatible to my laptop support only win 7 or 8.

can i run windows xp(no virtualization software) in my macbook pro retina 15 inch mid 2012 . all the bootcamp compatible to my laptop support only win 7 or 8.

Not without using a VM. XP is no longer supported in Boot Camp or on newer Apple computers.

Help please, can I run windows ME 4 a visio

Similar Messages

Maybe you are looking for