HELP PLEASE - control panel error

since installing the new drivers
if i go into the display setting and go into advanced, whenever i click on the
Geforce2 intergrated GPU Tab i get one of the following errors
if i go in by right clicking on my desktop i get!
run a dll as an app
fet a windows message
saing
run a dll as an app has encountered a problem and needs to close
and asks if i want to send an error report
if i go through the start menu and control panel
i get
rundll
an exception occured while trying to run "shell32.dll,control_rundll "c:windowssystem32desk.cpl," display"
I have tried reinstalling te drivers but does not make any difference
Can anyone offer any help please

I have now fixed by downloading and running
Detonator 30.xx to 40.41 fix
from http://www.guru3d.com/files/
Thanx anyway

Similar Messages

  • LYNC 2013 control panel error: this page cannot be displayed

    Dear sir,
    Now i am suffering with the lync 2013 control panel problem, i cannot open it and got the error "This page can't be displayed" as below screenshot shows,
    I've tried some ways, but still same problem
    1. Reflush the dns, checked the A record and SRV record of the FE are normally.
    2. checked the IIS and also cannot find any problem.
    3, reboot the FE server/IIS, and AD.
    4. i can open the console page normally via web :https://localhost/cscp
    5. i can ping the FE server domain name and return the right IP info.

    Hi TECH-Tommy,
    The certificate is under “Personal” store.
    In addition, can you open the page via
    https://admin.domain.com ?
    Also please try to clear IE cache and treat the FQDNs for admin, pool or FE server name as trusted zone.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Slow Soundblaster Z control panel - error message

    Hello,
    my control panel have a problem, that loads up very slowly and also is very laggy, if i use it. I also get an error (screenshot attached). I allready reinstalled the driver completely, killed all creative drivers from disk, still same problem.
    Any help?
    Windows 8.1 64x, latest updates and patches
    Error.jpg

    I think I've seen similar errors when trying to navigate the control panel using keyboard.
    so make sure to use mouse only.
    control panel can load slowly first time after restart.
    this should not happen when launching second time via tray icon.
    anyway it never seemed laggy to me.
    I would rather pass the fade in/out animation when switching category/tab, but not a big deal.

  • ICloud Control Panel errors when attempting to set up contacts and calanders

    I have connected my mail with the Control Panel, but had to edit the settings through outlook to get the mailbox to sync, send and receive mail.
    When i attempt to then sync contacts and calanders with Outlook 2010, it will download all of my information and then error
    This error reads "Your setup couldn't be started because of an unexpected error".
    Can anyone help?

    Thanks for the reply. I have a binding established in the 'wait for event' step. The step proceeds correctly when the event happens, so I belive that the binding is correct. The problem happens when the process control step in the 'latest end' outcome of the 'wait for event' step attempts to set the work item to obsolete. Which event container bindings does the process control need in order to set the work item to obsolete?
    Thanks,
    Chris.

  • Help please no sound ,error code

    [size="3" face="comic sans ms,sans-serif">Help please am having trouble with my X-FI card...
    [size="3" face="Comic Sans MS">?
    Sound Devices
    ??? Description: SB X-Fi Audio [7C00]
    ?Default Sound Playback: Yes
    ?Default Voice Playback: No
    ??? Hardware ID: PCI\VEN_02&DEV_0005&SUBSYS_002902&REV_00
    ?? Manufacturer ID:
    ?? Product ID: 00
    ??? Type: WDM
    ??? Driver Name: ctaud2k.sys
    ?? Driver Version: 6.00.000.368 (English)
    ?? Driver Attributes: Final Retail
    ??? WHQL Logo'd: n/a
    ?? Date and Size: 0/8/2008 0:2:50, 526232 bytes
    ??? Other Files:
    ?? Driver Provider: Creative
    ?? HW Accel Level: Full
    ??? Cap Flags: 0x0
    ? Min/Max Sample Rate: 0, 0
    Static/Strm HW Mix Bufs: 0, 0
    ?Static/Strm HW 3D Bufs: 0, 0
    ??? HW Memory: 0
    ? Voice Management: Yes
    ?EAX(tm) 2.0 Listen/Src: Yes, Yes
    ? I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
    ??? Registry: OK
    ?? Sound Test Result: Failure at step 9 (User verification of software): HRESULT = 0x00000000 (error code)
    [size="3" face="comic sans ms,sans-serif">Can anyone help me with this problem?.. Thank you..

    $Hi Clayp,
    You will have a higher chance of getting a
    reply if you could describe when did this error code appear and what
    were you doing when this happened. If you need help from Customer
    Support, you can contact them using the email form here.

  • Control panel error when installing from MSI file with JRE 7 update 21

    When I install JRE from the MSI file that I get from the user folder I get an error then I try to start Java Control Panel. Java applications works ok but I cant start the Control panel. If I uninstall Java and install it by executing the offline exe file the installation works fine and the control panel also works.

    Yes same problem here. I had a successful rollout with the MSI package and version 1.7 Update 17 on 1500 computers!
    I packaged the Update 21 and on my first test-clients the control panel crashes when I try to open it. But the setup ends successful without any error code all eventviewer entries are successful and it seems that the environment is running. Firefox plugintest was successful.
    Why doesn't offer Orcale the MSI files?! Since last year Java cost me o lot of time deploying Java. There is no update which you can release quickly because there are always bugs to deploy them.

  • HELP PLEASE! iMovie error message "_Sync_" couldn't be removed.

    HELP PLEASE! I had to force shutdown my computer and now my iMovie Library won't open. I just get this error message: "_Sync_" couldn't be removed.
    I was working on a movie within in iMovie and my computer was running really slow so I decided to shut it down for a little while. It wouldn't shut down and went to the gray shutdown screen and stayed there for a while so I held down the power button to force the shutdown. Now when i reopened iMovie my library that i created on an external harddrive won't open.
    I can see the folders for the movies on my external harddrive but I dont even know how to open them separately from the program. The ".imovieevent" files won't even give me the option to open them or import them into iMovie.

    Were you able to fix this? I have the same message now.

  • ICloud Control Panel error: 0x80070005

    I recently got a PC with Windows 7 PRO x64 from my work stuff, I am using Outlook, so I decided to install iCloud Control Panel on it  to get my Calendar and Contacts, the problem comes when after installed the Control Panel, with no installation errors, I sign in with no problems, but when I check contacts and calendar and press OK, I got the error 0x80070005... the weird thing its if I active Photo Stream, it works (just Photo Stream) but mail, contacts and calendar don't... I disable the firewall, antivirus ( even uninstalled it, Norton Antivirus), disable UAC and still get the same message.
    Any suggestions?
    Thanks.

    0x80070005
    It's an access privileges error message code ... but sometimes it can be produced by things other than an access privileges problem.
    One possibility is disk/file damage somewhere (although I'd expect that to produce installation trouble too). So it might be worth running a disk check (chkdsk) over your C:\ Drive, just in case.
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, does that clear up the 0x80070005?

  • HELP!  Control Panel missing and booting problems

    For some reason I cannot access the control panel where all the icons for networking, hardware and so and so on normally are to be found.
    It is not present as an icon on the dock and does not appear when in the "apple" menu I click the german translated name of it"Systemeinstellungen". Am I forced to install again the whole Leopard !!! or is it htere a way to get the panel back?
    I have also general problems. Often I am forced to start twice the Mac since it remains the first time in the booting process with the multicolour round wheel spinning endlessly.
    Thanks in advance ;-))

    Given your collection of problems reinstalling seems a good idea:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Need help installing Control panel for Creative Roar speaker!!!

    I am trying to download the control panel to my Windows XP PC, or my Windows 8 laptop but when I download the try to install the control panel both my PC & laptop says, Setup unable to detect a supported product on your system. What does that mean?

    hiawa23,
    You need to press and hold the PLAY button to activate the sound card feature. You may refer to this article for more information.
    You can also do the following if your PC is still unable to detect the speaker as a USB audio device:
    1. Ensure you use the supplied USB cable. It is able to handle both power and data.
    2. Power cycle the speaker (turn off and then turn it on)
    3. Connect the speaker to another USB port and try again.
    4. Do not use any USB hub; ensure the speakers is connected directly to your PC
    5. Try to connect the speakers to another computer and then try again.
    If the speaker is still not detected as a USB audio device, perform the following:
    1. Hardware reset: In any state, press and hold the Power button for more than 10 seconds, and then press the Power button again to turn the speakers on.
    2. Master reset: While the speaker is in pairing mode, press and hold the Multifunction and Volume down (-) button together until a voice prompt is heard that 'master reset' is completed.
    Cheers,
    Colin-CL

  • Help Please!! Error -1?

    When I install the IPOD disc onto my computer, all the things install except for quicktime. A error code comes up it says "Quicktime installation failed Error Code: -1.....anyone have any ideas on how I can fix this? Please help me.

    duplicate post http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Error-1-occurred-at-Scan-From-String-arg-1/td...

  • Help Please (523:523) error.

    Hi, I am receiving the error message "There is a problem with Adobe Acrobat/Reader if it is running please exit and try again (523:523). Please help urgently.
    I am not sure how to get Adobe out of protected mode if it is on or disable like some previous comments on the (523:523) error have stated.
    Thanks Katie

    Ok, let's try to disable Protected Mode.  Open Adobe Reader from the desktop icon; Edit | Preferences | Security (Advanced):
    uncheck Enable Protected Mode at startup
    set Protected View to Off

  • HELP PLEASE w/ utPLSQL error

    I am running some unit tests, and I keep getting this error.
    UT_FOR_LOOPS_TEST: Unable to run ut_ppkg_interaction.UT_FOR_LOOPS_TEST: ORA-00001: unique constraint (TEST.SYS_C0077930) violated
    Could I get some help with understanding how to debug this error.
    Thanks

    Assuming you are doing a record at a time in a cursor for loop, you probably have something like this:
    declare
    some variables
    cursor c is
    select whatever from wherever;
    begin
    for r in c loop
    insert into test (columns) values (r.col1, r.col2, etc);
    end loop;
    exception
    when dup_val_on_index then
    <this is the named error you are hitting>
    when others then
    whatever
    end
    What you need to do is nest the block so the error is handled without causing a termination of the main block/procedure. Look up nested blocks/exception handling. Then modify your code accordingly.

  • HELP please. nokia 5200 error

    Can somebody help me please.
    When I try to add a detail on one of my contacts, like another phone number, email, image, etc; this message apears: "Operation failed" and I can't add it. I don't know what else to do, I tried restoring the default settings, but I still have the message. help me please

    Are you storing you contacts on the phone memory or sim card ?

  • Any help please re:- restore error message? Thanks

    I have an error message.
    The iPhone "iPhone" could not be restored. An unknown error occured (6).

    Mudanzas
    Please delete or disable the OldFilm.AEX file.
    That is the Adobe solution for the issue in Premiere Elements 13.
    In Windows 7, 8, or 8.1 64 bit, the path to the file is
    Local Disk C
    Program Files
    Adobe
    Adobe Premiere Elements 13
    Plug-ins
    Common
    NewBlue
    and in the NewBlue Folder is the OldFilm.AEX file that you delete or disable by renaming it from OldFilm.AEX to OldFIlm.AEXOLD.
    Please let us know if that works for you.
    Thank you.
    ATR

Maybe you are looking for