Help Please! -eDVD4 burn issue- Anyone??

After enhancing my DVD on eDVD4 - my links don't work after burning on DVDSP. Help please! Thanks.

Thank you all for your help. The "gate" box was never checked, but when I just started over with a new test document (and maybe when I dropped the recording level a bit, to 81, in the Sound System Preference), the problem of my voice dropping out in pauses seemed to have gone away.
I did try using a new track with no presets at all (the Podcast/Male Voice instrument has some enhancements such as Male Radio or Male Narrator). It didn't seem to make much difference except that the recording sounded a bit flat. I couldn't tell a difference between Male Radio and Male Narrator, so I guess I'll stick with Male Radio.
Thanks again!
Shepherd

Similar Messages

Help Please! Burning issues

I have never had a problem burning to a disc from iTunes but for the last several days, any time I put in a disc, it goes to the "initializing disc for burning" then hangs up. The disc is ejected and say ERROR 4000.
WHat do I do? Is there something I can reset? I uninstalled iTunes and re-downloaded it but still no go.
I need to send some of my demos out and don't know what to so. Can anyone please help?

This is the diagnostic info if it helps anyone help me:
Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)
HP Pavilion 061 DM181A-ABA a305w
iTunes 7.1.1.5
Current user is an administrator.
Network Adapter Information
Adapter Name: {C54A5E93-E6B3-404F-B5D4-E4E5B665E86F}
Description: Realtek RTL8139/810x Family Fast Ethernet NIC - Packet Scheduler Miniport
IP Address:
Subnet Mask:
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed May 02 18:07:52 2007
Lease Expires: Thu May 03 18:07:52 2007
DNS Servers:
Network Connection Information
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.

I have a powerbook G-4 15 inch, It wont boot up and the display only works on the first try. it gets to the apple screen and freezes, when i try to restart theres no display. Help please, whats the issue here?

I left it running over night, it was running perfectly, in the morning the screen was black. i tried to restart it and got no display but i can hear the machine running. so i put away for several months, plug it in, charge the battery, it boots, i have a display, it loads the desktop and freezes. when i try to restart it theres no display. the last time i tried, i started it, i got to the apple screen and nothing. whats the issue here? please help.

Will it boot OK in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
 Cheers, Tom

Help Please! Serious Issues with Placing Screen Shots.

Hi,
I'm a long time browser of these forums but this is my first post. I'm pulling my hair out. I've spent hours on this and have a looming deadline. I've a lot of experience in PS and AI but have only started using ID recently. I've searched the forums and web in general, I've found people with similar or the same problems (both on Mac and Windows) but can't find a solution anywhere. I really think there's got to be a simple solution but I can't figure it out.
I'm using ID CS6 on Mac OS X 10.7.5
I've created several mutilpage PDFs (not for print, for screen viewing) in ID using vector graphics from AI without any issue. However, this time I'm trying to create a multipage PDF that will be a tutorial for GarageBand that requires dozens of edited screen shots. When I place the cropped screen shots they come into ID really badly pixelated. I've tried bring them in as several different file types, PNG, BMP, TIFF, JPEG, but all with the same result. I've tried scaling them in different ways and exporting the PDF in different ways but the screen shots still look terrible.
I have the document set up for digital publishing and it's A4 Landscape. I've changed the display performance to High Quality Display but this shouldn't really matter because the exported PDF still has horrible looking screen shots.
Sadly...when I bring the same screen shots into Microsoft Word Mac they look absolutely perfect. I really, REALLY don't want to be forced to use Word to create a tutorial, or anything for that matter.
Can anybody help? Please!
Thanks in advance.
Colm

It seems ludacris and defeats the purpose of the software for me since I hoped to use it mainly for tutorials containing screenshots.
The user interface you are capturing is designed to the monitor pixel grid and captures degrade if you sample them up or down. You can see the resampling problem if you use OSX's zoom feature–zoom in and the interface get's larger but it also blurs.
And extreme example would be a checkerboard drawn at 10 pixels per inch. Increasing the resolution to 300ppi doesn't add any information and degrades the checkerboard's appearance:
When you place a screen capture in ID and scale it, there's no resampling—the capture is resized and the pixels are scaled larger or smaller. If you print the capture it will look fine because a hi-res printer can accurately draw the different scaled resolutions.
When you export to PDF there's going to be a problem displaying the captures in Acrobat because there would only be one zoom level where the original interface pixels display unchanged. It's similar to Photoshop where the screen capture looks best at 100% where the image to monitor ratio is 1:1, but in Acrobat the 1:1 ratio might be any zoom percentage depending on how the capture was resized in ID.

Help please? connection issue

Been trying to connect my BB pearl to my laptop so I can update the software but the phone isnt being detected :/ what could this be? my security settings allow the device. I'm confused. Help?

Hi and welcome to the BlackBerry Forums
Read this link please
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15877&sliceId=2&docTy...
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Help, please, with recording issue

I am recording an audiobook, just my own voice solo, in the most recent Garageband using an external USB microphone, the Samson Q1U. The quality is very good except for one thing: in every natural pause, the sound precipitously drops down to nothing. When played back, it sounds unnatural, like a pocket of dead air. If I turn down the sensitivity in the Sound System Preferences, it still happens. It isn't as pronounced with the MBP's built-in mic but the quality isn't as good, either. iLife tech support couldn't help me. Any suggestions?
I thought maybe I'd switch to Audacity instead but I'm a little mystified by the fact that every time I stop and start recording, it seems to add another track, which will quickly get out of control. Does anyone know how to make it stick to one visual track like Garageband does?
Thanks so much!
MacBook Pro 17" Mac OS X (10.4.10) Samson Q1U USB microphone

Thank you all for your help. The "gate" box was never checked, but when I just started over with a new test document (and maybe when I dropped the recording level a bit, to 81, in the Sound System Preference), the problem of my voice dropping out in pauses seemed to have gone away.
I did try using a new track with no presets at all (the Podcast/Male Voice instrument has some enhancements such as Male Radio or Male Narrator). It didn't seem to make much difference except that the recording sounded a bit flat. I couldn't tell a difference between Male Radio and Male Narrator, so I guess I'll stick with Male Radio.
Thanks again!
Shepherd

Help Please! Restore issue

Hello,
I plugged my iphone 4 into my laptop yesterday and left it to do its thing. I came back, and the phone showed the itunes and cable symbol. I disconnected and reconnected many times, but each time the screen kept saying that the phone was in recovery and needed to be restored. After a fruitless call to Apple, I was forced to recover as I needed the phone. Unfortunately I seem to have lost everything, pictures, contacts, the lot. Can anyone suggest a course of action to get these back? The data must be in there somewhere. Not at all happy...
Many thanks,
DRW

How often do you sync your iPhone with iTunes? iTunes maintains a backup for your iPhone which is updated by iTunes as the first step during the iTunes sync process.
This link provides the data on your iPhone that is included with the backup.
http://support.apple.com/kb/HT1766
All iTunes content on your iPhone - all music, movies, tv shows, and 3rd party apps should be in your iTunes library on your computer so no iTunes content should be lost.
Although photos and videos in the Camera Roll are included with your iPhone's backup, photos and videos in the Camera Roll can and should be imported by your computer as with any other digital camera. The Camera Roll is for temporary storage before the photos and/or videos are imported by your computer.
Contacts are also included with your iPhone's backup but contacts are designed to be sync with a supported address book application on your computer. Not a good idea to depend on your iPhone and your iPhone's backup or on any cell phone alone for this data, which can be lost or stolen. Your iPhone's backup includes a significant amount of data.
At the iTunes menu bar, go to iTunes > Preferences. Under the Devices tab what is shown as the date and time for your iPhone's last backup? Since you restored your iPhone with iTunes, there should be two backups now.

Help please, Hard disk issues and HPQ confusion

Hi all,
I have a Compaq N800c EVO laptop, well 2 but thats a story. And I'm having a game with the hard drive.
Until monday my main laptop was an FIC A360, but this Compaq will be taking it's place.
So I have the N800c which came with a compaq stickered 40gig fujitsu MHS2040AT, it boots and works, OS and all. The fujitsu is ATA-100 and oem equipment in the notebook.
The FIC I'm retiring has a retail Hitachi Travelstar 7K100 60Gig hard disk. This works (OS and all) in the FIC but in the N800c nothing, just a flashing cursor on the top left of the screen. The Bios can see it, self tests ok, but won't boot it.
If set to cable select I get the same, If i set it to device 0 it gives a non system disk error.
I thought this was strange so I've also tried 2 Fujitsu MHN2200AT 20gig drives again, no joy. Both had clean OS installs.
I flashed the system Bios up to the latest revision from the support section of the site, tried Hiachis drive config utility to hold the ATA to 66, and tried all of the above again.
I even have a second of these laptops i purchased without a hard disk and almost disgarded as i thought this error was the laptop. Since discovering this all of this behavior is repeatable in the second laptop!
I've read about drive firmware being locked down on IBM thinkpads, is this a similar thing? Where do i get the correct firmware to apply to my drive? to allow it to work with this laptop. Or Where do I get a Bios that isn't prohibitive for the Laptop.
I have written to Hitachi this morning, and now posting here this lunch time
Many thanks and kind regards
Richard

Not so, I've done this on a few machines hence wanting to do it on this one.
At initial boot up it'll discover a whole bunch of new hardware and the items it can't find will become yellow question marks in the device manager. i'm going to have a little play with one of the scrificial fujitsus later and verify either way then i'll report back. I'm fairly confident what i'm seeing is a firmware clash though as there is no logical reason the drive shouldn't load. It should at least go through to some activity, but its almost as if the computer has asked if its in its club, then when the drive says no it refuses to continue. In the bios and hitachis hard drive utilities it tests as ok. As do the two little fujitsus.
IBM thinkpad drives are "ibm'd" in their firmware anyone know of compaq doing this?
Rich

My latest import photos are missing from my iphoto library but still on my ipad, how do I get them back into iphotos. I very frustrated because i just imported them from my camera and have not been able to go thru and edit the ones I want. Help please

I recently imported pictures from my camera to iphoto. I also synced my ipad. In less than 24 hours my photos are now missing from iphoto even after trying to sync my ipad again. These pictures are from a very special occasion and I did not even get time to edit. Someone help please

-Background-
My issue, which I resolved and may help you was the following:
I have an IPAD 3. I took over 5 GB of pictures on a third party camera. The car was full so I imported those pictures to my IPAD 3 and deleted them from the SD card. While on IOS 5.x, the photos on the IPAD were there under last imported.
Over the last few days, I upgraded to IOS 6. No issues.
Then, my family wanted to see the pictures from the trip. I went to the IPAD and could not find the photos. It listed 40 photos only. The last imported was there, but listed as empty. When I went into the settings>usage, it listed 5GB + of photos in the photos area. I was confused. I plugged my IPAD into ITUNES, first thinking I would get a backup asap (icloud was full after importing the photos). Then I though I would downgrade to IOS 5.
Also, itunes listed that I had 40 photos only, but 5GB of OTHER data. I was convinced the data was not lost. When I tried to browse the IPAD 3 using windows browser, the photos where NOT in the DCIM folder, so I was not able to simply "FIND" the photos and copy them to my PC.
-SOLUTION-
I downloaded third party software onto my PC called "http://www.i-funbox.com/" I fun box. I had no idea if this would work, but other forums with other issues called out similar products for iphone issues.
When I installed the program, which was free, and so far free of malware, I started to explore my IPAD file system.I found my photos, under IPAD>RAW file system>DCIM>100IMPRT.
-ROOT CAUSE-
I suspect when I upgraded to IOS 6, apple fails to register the IMPORT folder of photos as such, photos. So the file system in IOS looses sight of what is inside the last imported folder. Essentially removing them from applications such as "Photos". Why windows does not seem them, is beyond me. But the program I found did see them in raw format, and I was able to COPY them to my PC. Then I deleted them from the IPAD, because I had no other way of managing this folder in IPAD, and it was using a lot of space.

How to get reports cumulated balances? need help please

Dear all,
I need your help please in this issue.
I am creting a report using reports designer in oracle, well the fact is i don't know how to do the following:
if i have for example in the report the following to be diplayed :
Date Amount Balance
25/5/2011 2000
27/5/2011 5000 should be calculated and equal to 2000+5000=*7000*
28/5/2011 4000 calculated and equal to 7000 + 4000=*11000*
29/5/2011 1000 calculated equal to 11000 + 1000 = 12000
what is the method so i can get the balance values calculated 7000, 11000 and 12000? what do i do? any hints please
thanks for your help

Using analytic function can be done through query as below...
SQL> SELECT EMPNO, ENAME, SAL, SUM(SAL) OVER (ORDER BY SAL ROWS UNBOUNDED PRECEDING) RUNNING_BALANCE
2 FROM SCOTT.EMP
3 /
     EMPNO ENAME             SAL RUNNING_BALANCE
      7369 SMITH             800             800
      7900 JAMES             950            1750
      7876 ADAMS            1100            2850
      7521 WARD             1250            4100
      7654 MARTIN           1250            5350
      7934 MILLER           1300            6650
      7844 TURNER           1500            8150
      7499 ALLEN            1600            9750
      7782 CLARK            2450           12200
      7698 BLAKE            2850           15050
      7566 JONES            2975           18025
      7788 SCOTT            3000           21025
      7902 FORD             3000           24025
      7839 KING             5000           29025
14 rows selected.
SQL> -Ammad

When trying to burn a blank audio cd from an existing playlist, it fails and advises error number 4450 - anyone able to help please? thanks

when trying to burn a blank audio cd from an existing playlist, it fails and advises error number 4450 - anyone able to help please? many thanks

Hello totallyabsorbed,
Thanks for using Apple Support Communities.
To troubleshoot issues burning CDs in iTunes on a Windows PC, please start with the troubleshooting in the following article:
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Take care,
Alex H.

Itunes 8.01 cd burning issues. Please Help

wondering if anyone else has been experiencing the same issue i have in itunes 8.01. When i burn a disc now i have an array of issues. 1st, with the same media i used successfully before, sometimes when i attempt to burn a audio cd i get a dialog box that reads burn disc fail, unable to calibrate the laser for this media. It happens at various write speeds, so not sure what wrong. Also the few disc i was successful in burning skip during playback and will-not play in certain cd players. The bottom of the disc is scratch-less and everything appears normal. Lost at the moment. Anyone have a solution or suggestions please help. Or is their a certain type of cd that works best.
thank you
bac

Just got it back from the shop? Did you mention the CD burning issues when you took it in? It really sounds to me like you have drive problems more than iTunes problems. The difference is indicated by whether or not Finder recognizes any given disk or not.
If Finder does not recognize that the drive has a disk in it or can't read the disk, that is most likely a drive problem and is best resolved by Apple service.
A possible long term, spend money option is to purchase a good external optical drive. If you burn lots of disks, this option makes more sense. I have a LaCie drive that burns all the current formats plus has Light Scribe capability. I don't recall getting a coaster out of it. Plus I can move it from computer to computer.
"1 coaster in 5 with 7" means that he got 1 bad disk out of 5 burns with iTunes version 7. If you have been using Time Machine than you can restore the application from the applications folder some time back, when you had a previous version of iTunes. If not, restoring an older version becomes more tricky and I have to rely on the advice of others to tell us how to do that.
If you are not backing up your system with Time Machine or something else (Time Machine is really the best, I think), back up a couple files from your iTunes folder. Copy and save somewhere the 'iTunes Library' file as well as the 'iTunes Music Library.xml' file. If something happens and all your library info (a list of all the music you've added plus playlists, etc) can be restored by simply replacing those files in your iTunes folder with the ones you saved somewhere else. You need to update the saved files periodically as you add music or otherwise change things in your iTunes, but that is no big deal. Just periodically re-copy the files to the place where they are saved and click 'Replace' in the pop-up when prompted.
Hope this helps. Please let me know.
Robert

Hi, Firefox keeps crashing, the crash signature is ProcessBoundaryCells. I tried searching Mozilla, but there are no supporting articles. If anyone can please help me fix this issue, that would be great. Thanks

Hi, Firefox on my desktop keeps crashing at just random moments. Sometimes not very often at all, but other times it can happen a few times within an hour.
My Desktop Window Manager also crashes regularly and the dialogue box always pops up saying its stopped working. However, this doesn't seem to effect anything.
It could be realated though, as I just had this desktop built a few weeks ago and a few times it's crashed as well as programs.
If anyone can help me fix this issue with Firefox, that would be great. Thanks in advance.

Hi,
I updated the Flash plugin, but I still keep getting crashes.
I will try to disable the hardware acceleration in the Flash Player as you recommended and hopefully this will work.
Although the last crash report I got has a different problem then before,
https://crash-stats.mozilla.com/report/index/6c5d8c66-6789-4b52-94e4-61cdf2110530
Signature: BuildArgArray
If you can please offer any more advice that would be great, thanks.

What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d. Can anyone please help me on this issue?

Can anyone please help me on this issue "What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d."??

Sir, Thank you very much for your prompt response. I have already done this. But the problem is still persisting. Actually, I want to upgrade my WhattsApp application and as soon as I click the upgrade button in App Store, it asks for the password of previous apple i.d., which I don't have as I have bought this phone from somebody. There is no option for log out or log in. It there any other way out to upgrade the WhatsApp ????

I try to create an html for IPad. The html page contains an element overlapping a video, now it works as for view but the focus is still with video. This denies the event of overlapping element from occuring. Can please anyone help to solve this issue?

I try to create an html for IPad. The html page contains an element overlapping a video, now it works as for view but the focus is still with video. This denies the event of overlapping element from occuring. Can please anyone help to solve this issue?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Help Please! -eDVD4 burn issue- Anyone??

Similar Messages

Maybe you are looking for