HELP PLEASE error code -36

I Have a MAC PRO, which I use for Photography. I have 2 external hard drives (WD 500GB)for storing my images. Just the other day loading images on and got this message ( The Finder cannot complete the operation because some of the data in smb://..... could not be read or written. (Error code -36). I am using a NIKON D200. Can anyone help.

i have the same problem,
I just bought 2 new elements western digital 320 gig hardisk...
THis is what happened.
I was trying to load movie files in both of my HArd disk. I loaded the first harddisk from a PC successfully, .. Then I bought a new MACbook with leopard, 2 gig processor, 2 gig ram.
I tried using the new macbook to copy the files of the first haddisk to the 2nd harddisk.
then I got error code 36 ..this is the exact error.
<The finder cannot complete the operation because some data in "elephantdreamhd.avi" could not be read or written. (Error code-36)>
I was so disappointed. Good thing I didnt trow my old acer PC,aspire 5672wlmi,1.66gig processor,1gig ram, that i used to load the 1st HD. I tried to copy all the files from first HD to the 2nd HD and it is successful using the PC. no problems at all.
When I finish copying,, i tried to replicate the problem again in MAC by deleting the file that has caused the error in MAC and recopying again using macbook,, and viola,,same error in mAC,,.error code 36..
actually i'm copying a lot of avi files, then i first encountered the error, i just tried deselecting the file that caused the error, then again , it errors out again for a different file. IN pc, no problems at all.
I don't think the problem is in the HD, both my HD are new and i don't think the problem is only the files. ANd when i tried copying the same files in PC, there were no problems at all. I think the problem is with the MACBOOK. I think finder has a bug.
I'm a new PC to mac user. I though i will shift to mac permanently, just like most of the people i knew. I thought i'd be one of them because I read a lot of good this about the mac OS already but because of this error 36, i now having a second thought.
I already read a lot of forums about error code 36, and I did not find any solution.

Similar Messages

My macbook pro intel core duo 2 keeps restarting intermittenly. Help with error code.

I have run a Hardware Test, and it gives the follwing error code. Can anyone tell me what this is? I recently had my logic board replaced within the last 3 months, so it shouldn't be a problem there.
Thank you very much for any and all help.
Error code:
4SNS/I/40000000:TGOH-128.00

Online references possible memory issue? Sensors?
https://discussions.apple.com/thread/3140607?start=0&tstart=0
Keep taking it back and they keep switching parts until the problem is gone.

HELP PLEASE - ERROR ON PANSONIC P50VT20B AND Panso...

HELP PLEASE - ERROR ON PANSONIC P50VT20B AND Panasonic HOME CINEMA SC-BTT775.
the moment i login using the tv or blu-ray i cannot choose anything other than ' Back to homepage ' message which is displayed under my contactlist on tv... at times it says too many contacts... Kindly help... the camera is skyoe ty-cc10w for panasonic tv's and blu-ray...

Same issue

Need help with error code 1714!!!!!!!!!!! Please help

Need help trying to upgrade itunes for windows, i get to a certain point and the following error comes up "ERROR 1714: THE OLD VERSION OF ITUNES CANNOT BE REMOVED CONTACT YOUR TECHNICAL SUPPORT GROUP" i click ok and then another error comes up "ERROR 1603 FATAL ERROR" can anybody help Please!!!!!!!!!!!!!!!!!!!!

hi wags!
hmmmm. okay, let's try using the complete uninstallation instructions from the following document to remove your existing itunes and QT:
Trouble installing iPod, iTunes, or QuickTime software in Windows
if you do that first, will the new itunes install go through properly?
if you get an error message on the uninstalls, let us know what it says. include error message numbers if you're getting any.
love, b

Help with error code, please.

I have compiled a small AS3 script of a bouncing basketball with sound - the volume of the sound decreasing as the bounces get smaller.
I have obviously not done something correctly in the way I have installed the sound because I get this error message " 1180: Call to possibly undefined method bounce2 "( bounce2 is the mp3 file). Without the sound the ball bounces perfectly - it is the sound that has killed it. I am a newbie and am trying to learn AS3 the hard way - by experience but am stumped here - can some one help, please? Below is my script.
// create a ball sprite
import flash.media.Sound;
var initialrotationSpeed=12;
var rotationSpeed : Number;
var initialxVel : Number=8;
var stage_width : Number=750;
ball_mc.x=80;
ball_mc.y=360;
//setup position and velocity variables
var xPos : Number=ball_mc.x;
var yPos : Number=ball_mc.y;
var xVel : Number;
var yVel : Number=0.5;
var grav ; Number=1;
var vol : Number=1;
var snd : Sound=new bounce2();
snd.play();
addEventListener(Event.ENTER_FRAME,onLoop,false,0,true);
function onLoop(evt:Event) : void {
if(ball_mc.x/stage_width));
xVel=initialxVel*(1-(ball_mc.x/stage_width));
yVel+=grav;
xPos+=xVel;
yPos+=yVel;
if(Math.abs(yPos-560)<1&&Math.abs(yVel)<1)
remove EventListener(Event.ENTER_FRAME,onLoop);
else if(yPos>560){
yPos=560;
yVel*= -.8;
xVel*= .8;
vol- =0.1;
snd.play(0,0,newSoundTransform(vol));
ball_mc.x=xPos;
ball_mc.y=yPos;
if(ball_mc.xstage.stageWidth-ball_mc.width/4||ball_mc.x<0+ball_mc.width/4){
xVel*= -1;
addEventListener(Event.ENTER_FRAME,Rotation);
function Rotation(event:Event):void {
if(ball_mc.x/stage_width<1)
ball_mc.rotation+=initialrotationSpeed*(1-ball_mc.x/stage_width);
if(ball_mc.x<700)
xVel=initialxVel*(1-(ball_mc.x/stage_width));
ball_mc.x+=xVel;
else
removeEventListener(Event.ENTER_FRAME,Rotation);

Thank you - that was it - "class" - or lack of .
I am most appreciative of your assistance
regards

Help with error code 0x803C010B

I have a Toshiba Satellite laptop that I take back and forth to my office. I have an hp OfficeJet Pro at the office and an hp Officjet Pro 8500 at home. I have been able to print at home until today. I have spent almost the entire day working on a report only to find I can't print it!!! I checked the printer status and it says "Error". I click on the trouble shoot up top and it runs to a point then says it cannot continue. It gives me the error code 0x803C010B. I opened the hp Support site and then copied and pasted the error code to avoid typos. The hp "support" site didn't recognize the error code the hp printer trouble shooter gave me (!). I promise I didn't make up the error code! So, can anyone help me?
I think I've spent approximately 2-1/2 hours chasing down an answer - all for naught! I think I'm just going to uninstall and reinstall (which I seem to be doing more and more lately with hp products). But, If anyone can give me a c lue, I would certainly appreciate it. (Just don't add a survey - I've answered 3 surveys tonight, already from hp!!! I wonder if they really read these things!) Thanks!

Hi @TennesseeWoman
Thank you for reaching out to the HP Forums, I appreciate your efforts thus far.
I have searched this error code and found that is is not an HP error, many other printer owners are seeing this error code.
Look at what others are saying here;
I have the same issue with my Samsung SL-C410W printer.....
I can not access my Epson XP-300 wireless printer......
And so forth.
Please try the following steps Arvind Ram posted in the Microsoft Community;
For all of those who are using network printers, the reason for the issue to occur can be due to SNMP (Simple Network Management Protocol). SNMP manages devices on a network. Some Printers may not support this protocol, because this obtains the printer's status regardless of whether or not they support SNMP, although it only supplies simple status information for those devices.
I suggest you to disable the SNMP option from the printer properties. To do that please follow the steps below:
Open Control Panel.
Select Hardware and Printers option.
Right click on the Network printer (your printer).
Choose Properties.
Go to the Ports tab and choose Configure.
Uncheck SNMP Status Enable option.
Restart the computer and check if the issue persists.
If the issue persists, I suggest opening the link I got this from and looking through to see if you can find any other possible solutions, or maybe posting a new thread in the Microsoft Community.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Help! error code 8 with Adobe premier cs4 and OpenGl

hey there,
i've been trying to work with adobe premier cs4 on my new Thinkpad w520 (i7 2720, 8GB, Nvidia quadro 1000m)
i keep getting this error messege regarding the OpenGl (error code #8) that lost connection with the display driver, after that its automaticly shutting down premier.
nvidia representive suggested me to download an old driver (268.71) instead of the latest one, still wouldn't solve the problam.
can anyone help me with that issue!?
jonny

hey jonygeron,
if you uninstall the current graphic driver , let windows install its generic driver .. can you get Premier CS4 to work ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

I need help with error code 32812:

Hi. I am trying to read in some voltages using FP-AI-112. A while ago, I developed a Labview program to do that, and it worked fine. Now, I'm going back and using it again, and I keep getting the error code 32812: "the specified tag name is not found." I have checked and rechecked my tag name in Fieldpoint Explorer over and over again, and I swear that the tag name in my program is identical to the one in Fieldpoint Explorer. Please help. Thanks.

Which version of FP Explorer are you using? Did check the configuration of the IAK file itself?
You can read the following to get more information:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
Hope that this helps. Good luck!
Chin Pei

HELP! Error Code VDR363

My box was getting updated with the new Vision software overnight last night and when I switched it on this morning, it has come up with the following error message:
Downloading Update Tool Failed: Error Code VDR363
There is a flashing red light on the front of the box that flashes red quickly in a sequence of three and then goes off.
I tried phoning the help desk and was on hold for the best part of 40mins, got through, and then put on hold for another 40mins so I could be put through to the team dealing with the new vision upgrade, only then to be disconnected.
Any suggestions?

Hi gmackay11903,
Thanks for posting. Are you still getting the error message? If so can you drop me an email with the details. You’ll find the “contact us” form in the about me section of my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Do you need help with error code 1004

The alert message in iTunes may include one of the following numbers (or the message may include a number not listed here):
1, -1, 2, 4, 6, 9, 13, 14, 20, 21, 23, 26, 28, 29, 34, 35, 36, 37, 40, -48, -50, 1000, 1002, 1004, 1011, 1013, 1014, 1015, 1479, 1600, 1601, 1602, 1603, 1604, 1611, 1631, 1638, 1639, 2001, 2002, 2005, 2006, 2009, 3002, 3004, 3013, 3014, 3015, 3194, 3200, 9006, 9807, -9808, 9844, 4026xxxxx.
Click the link for the error code you have. If it's not listed here, check the error messages below, and then if necessary follow the advanced steps below to resolve the issue.
Resolution
Specific error messages and resolutions
Collapse All | Expand All
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service. If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 13, 14, 35 and 50 (or -50)These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
Hang during restore process

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Help with Error Code: 5 in CS 5.5 Win 7

I got an "Out of Memory" message while editing a file and had to use Windows Task Manager to close InDesign. When I restarted InDesign and attempted to open the file I got the message: Cannot open "[filename]". The file "[filename]" is damaged and cannot be recovered (Error code: 5).
I have no backup of the file.
I then tried to open an earlier version of the file and got the same error message. It seems to be corrupting every file I try to open. HELP!!!

You need to empty the InDesign Recovery folder. It's hidden so you need to set Explorer to show hidden files, then navigate to Users\<your user name>\AppData\Local\Adobe\InDesign\Version 7.5\<language>\Caches
That should allow ID to restart normally and let you open the last saved version of your file.

***NEED HELP. ERROR CODE -1450***

iTunes wont save any of the songs i import!!! i have made a back up disk of the music library and when i restore all the songs a screen pops up with n error code-1450. what can i do to fix the problem???? i alreary downloaded the new version of iTunes and still no results!
Windows 2000

Tarasik,
The most helpful information in those posts is staring you in the face in the very first link: it's quite possible—even probable—that you are running the wrong version of AHT (Apple Hardware Test).
Are you 100% certain you're using the version of AHT that came with your particular machine? AHT is highly machine-specific and you cannot use a version that came with the install media for another Mac.
I also suspect that another, very important clue is contained in the last version of BDAqua's first post.

Need help with error code 150:30

need help with finding out what error code 150:30 is and how to fix it

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

RAID Mirror failed - help interpreting error code?

Hi all - I run the primary disk mirrored on my Dual 2.0 Xserver (10.4.7) using Apple's software RAID. No problems for two years, but found this am a warning on System Monitor, showing my RAID as degraded - one disk had dropped out of the set. All functions continued forward without interruption.
Here's all the system log has to say:
Aug 12 18:29:34 mail kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "Xserver80G" (9477A440-E50F-11D9-B65B-000D939C5BEC), member E612F8B0-3082-4222-A9FE-B58D35CDA3B8, set byte offset = 907558912.
Aug 12 18:32:39 mail kernel[0]: AppleRAID::recover() member E612F8B0-3082-4222-A9FE-B58D35CDA3B8 from set "Xserver80G" (9477A440-E50F-11D9-B65B-000D939C5BEC) has been marked offline.
Aug 12 18:32:39 mail kernel[0]: AppleRAID::restartSet - restarting set "Xserver80G" (9477A440-E50F-11D9-B65B-000D939C5BEC).
The System Monitor shows no pre-failure warnings on the HD's themselves, and I'm assuming there was an error in the mirroring, and the RAID software gracefully dropped the offending volume.
My questions are: Any help interpreting the error code so I can narrow down the likely cause, if any? any ideas what causes this kind of error? Is it likely to recurr?
Any help much appreciated. I'll be rebuilding the set tomorrow after working hours.

The RAID set got out of sync. You might see this from time to time if you use Apple's raid driver.
Take a look at softraid.com for a better driver.

Help on Error Code -200279

This block of code was working perfectly fine until yesterday - now I'm getting an error code -200279 every time it runs. I don't believe I changed anything. Attached is the block of code.
From the hardware side, I have a shunt installed inline with a valve that is outputting a small voltage (~0.5V) when the valve is powered on. I have a relay (NI 9481 module) turning the valve on and off (the true/false cases) and I'm trying to measure the analog voltage out of the shunt (NI 9205 module). Basically I only want 2 seconds of data and the for loop waits 499 counts (0.5 seconds) before turning the valve on.
Can anyone tell me what I'm doing wrong here? I have independently verified that the AI module is working properly (in MAX) and that the shunt is outputting about 0.5V when the valve is powered on.
Thanks for the help!
Here are details from the error:
Error -200279 occurred at DAQmx Read (Analog DBL 1Chan 1Samp).vi:1
Possible reason(s):
Attempted to read samples that are no longer available. The requested sample was previously available, but has since been overwritten.
Increasing the buffer size, reading the data more frequently, or specifying a fixed number of samples to read instead of reading all available samples might correct the problem.
Property: RelativeTo
Corresponding Value: Current Read Position
Property: Offset
Corresponding Value:
Task Name: current_draw
Message Edited by Erik_1 on 07-10-2007 10:10 AM
Attachments:
Error_example.JPG ‏88 KB

Hi Erik,
When you say you have independently verified that the AI module is working properly; does that mean you have started a test panel in MAX and watched the analog input voltage while powering
the valve on and off?
Can you put a handheld multimeter across the shunt and measure the output voltage while the NI-9205 is measuring as well?
Try a different input channel with your NI-9205? or a different NI-9205 if you have one available.
Thank you,
MatthewW
Applications Engineer
National Instruments

HELP PLEASE error code -36

Similar Messages

Maybe you are looking for