Help, Please. .f4v won't work in browser?!?

I am a newbie and trying to design my own site so please don't laugh too hard if this is an easy question.
I just created a site using Flash CS4 then published to Dreamweaver CS4, then published to server using Dreamweaver via FTP. All files seem to be on server ( .swc, .fla, .html. f4v, .flv) but .f4v video won't playback on the internet.
more info:
video plays fine in Flash when testing movie and video works fine when checking in browser with Dreamweaver. Do I have to point to the video some how? I have tried everything that I know, please help.
Thank you in advance.

I should have mentioned I use GarageBand 2009. I've read other posts all over the web where people have trouble with this Tascam US122 but with the older Leopard versions. I had no problem with ordinary Leopard 10.5.6 - it's only since I upgraded to Snow Leopard, and it's only in GB.
I've tried a powered hub which has helped others, but doesn't help with my problem.
I reallly only want to know which driver/drivers are the problem.
Then I can work out a solution, even if it means buying a new interface. So long as I can't identify what the problem is, I'm not prepared to buy new equipment that might make no difference at all.
Bad luck with your electronic drums macuserrich - it's annoying isn't it!!!!

Similar Messages

Help please - GB won't work - Midi driver conflict with Snow Leopard

I use Snow Leopard 10.6.8 on my MacBook Pro. Ever since I upgraded to this version GarageBand won't work. When I try to launch it I get 3 or 4 pop up screens saying GB has detected software midi conflicts please update your midi drivers. If I click through these and wait for 3 or 4 minutes, GB does open but it takes ages to change anything and it shows there is no Core Audio. It also won't 'Play' an already recorded track and there is no sound for anything.   I have several plugins Including Line 6 Podfarm, and the midi drivers for Melodyne and record through an old Tascam US122 with midi.
One driver for the Podfarm was automatically put in an incompatibel Software folder when I upgraded. I put this file in Trash and updated my Podfarm drivers but it's made no difference.
In GB Preferences it shows the Tascam US122 as my recording/playback and my midi device, but also 'no midi device detected' even though it is connected.   There are no driver updates for this old Tascam model.
Everything still works perfectly in Melodyne. How can I find out which driver(s) are involved in the conflict for GB? I have no guarantee that even if I buy a new Tascam interface, or any other brand, that GB will work, even then.
Is there a way to identify which driver, or drivers, are the problem? Surely that is not beyond what a MacBook Pro can do?

I should have mentioned I use GarageBand 2009. I've read other posts all over the web where people have trouble with this Tascam US122 but with the older Leopard versions. I had no problem with ordinary Leopard 10.5.6 - it's only since I upgraded to Snow Leopard, and it's only in GB.
I've tried a powered hub which has helped others, but doesn't help with my problem.
I reallly only want to know which driver/drivers are the problem.
Then I can work out a solution, even if it means buying a new interface. So long as I can't identify what the problem is, I'm not prepared to buy new equipment that might make no difference at all.
Bad luck with your electronic drums macuserrich - it's annoying isn't it!!!!

HELP PLEASE! I am working with GH4 4k footage in adobe preimere and the computer keeps freezing... any ideas?

HELP PLEASE! I am working with GH4 4k footage in adobe preimere and the computer keeps freezing... any ideas?

Thanks for your response. I'm sorry for the lack of details, but posting a question on this forum is completly new to me, so I guess I am learning how it works.
I have to be honest, I am a novice to video editing, but I am here to learn so I will provide all the info I know and please let me know if it is enough...
I filmed my first feature film on a Panasonic GH4. We filmed in 4k (compressed files). I am about 900 GB of total files for all the footage. I am currently editing on a 17' Toshiba Satellite i7 with 750 GB of space and I believe 8 gb of ram. All of the footage for the film is not on the computer, but stored on a 1 TB external hardrive (Rugged Lacie is the name of the hard drive). I am using a usb 3.0 from the hard drive to the computer.
I actually was able to get through about 17 mins of edits for the film before I started to experiencing the computer completely freezing up on me. I tried using a different hard drive, and same issue. A friend mentioned it might just be the computer is not powerful enough to edit all the footage, but he wasn't for sure considering the computer is less than a year old and is on the higher end for a toshiba.
I am requesting advice on how to continue editing the film without the computer crashing if that is even possible with using the same computer. If not what would be my options?
Thank you!

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

There's a new driver bundle for OSX 10.6 that you might need to install, the HP link seems to be failing at the moment but there's a version of it here: HP_Installer_Scanjet_v2.4.3_Ph4.dmg
There's a piece on the HP Forum about it here (some folks have problems installing ...)
http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/Scanner-Drivers-softw are-for-Snow-Leopard-Mac-OSX-10-6-will-not/td-p/2301674

Please help! Ipod won't work with my itunes after plugged into MAC

Hi, I am brand new to my ipod and i plugged it into my PC to get it started, then i plugged it into a friends mac to get his songs- now when i plug it back into my computer it says it is linked to another itunes library and asks if i want to link it back to this one and replace all of the music. I do not want to loose all of the music but want it reconnected to my itunes with the music on my computer and taking the music on the ipod (from my friends itunes) into my itunes. What do i do? I apologize if this is something posted before,i couldn't find an answer. Please help!! thanks

That above article will not resolve the issue. It explaines it clearly in the article.
"Using an iPod formatted for Macintosh on a Windows computer is not supported. Using an iPod formatted for Windows on a Macintosh computer is not supported."
this means that it won't work with out a 3rd party tool. You HAVE to restore it if you take it between different OS. That document works only if your taking it between windows machines or all mac machines.

I need help. Earphone won't work on stereo

I have late 2012 macbook pro, upgraded to mavericks, and when i plug my earphone it won't work on stereo. the left earphone doesn't produce sound. I thought it was my earphone but apparently my earphone is fine when i plug it into my phone. Fortunately the internal speaker still works on stereo. Has anyone ever experienced this ? I can't work if there's no music.. please help!

Go to Applications > Utilities > Audio MIDI setup and see what the settings look like for built in output. Maybe the left channel is muted.
I'd try another pair of earphones too. Maybe it's the earphone jack on the computer.

Need Major help please - mac won't get passed apple screen

Please help I have an assignment due in midnight tonight and my mac has just crashed. When I switch it on it loads the screen with the apple icon on it and with the animated turning circle but that's it. It doesn't do anything from there. Please give any advice you can.

No I don't have a backup at all since my external HD broke. I can go into the leopard install setup with the disc. I have tried repairing disc with disk utility which it says is successful. It then still won't work. On trying to repair disc permissions it comes up with an error 'First Aid Failed - the underlying task reported failure on exit' comes up. During repairing disk it comes up with the error Incorrect block count for the file pcscd.pub.
Thanks I appreciate your help.

Help - Php just WON't work

I followed these directions and it simply won't work. Help. Why don't you put PHP and MYSQL in the installer itself? This is why I use Apache, and I can't stand Apache, I want to use sun, but apparently there is no hope for mysql to actually worth with your server, and php can?
4.2 Configuring Web Server to use PHP as NSAPI Plug-in
To configure the Web Server to use PHP as NSAPI plug-in, perform the following steps:
Go to the web server instance's config directory.
For example (UNIX):
/sun/webserver70/https-mywebserver/config
Add the following lines to the magnus.conf file:
UNIX/Linux:
# Initialize PHP v5.x
Init fn="load-modules" shlib="libphp5.so" funcs="php5_init,php5_close,php5_execute,php5_auth_trans"
Init fn="php5_init" errorString="PHP Initialization Failed!"
Windows:
# Initialize PHP v5.x
Init fn="load-modules" shlib="php5nsapi.dll" funcs="php5_init,php5_close,php5_execute,php5_auth_trans"
Init fn="php5_init" errorString="PHP Initialization Failed!"
Edit the obj.conf file to enable the Web Server to process a PHP-based request.
Important note: If there are more than one file with the name "*obj.conf", be sure to edit the correct file. Use wadm's get-virtual-server-prop command to get the correct file name. For more information on this command, see http://docs.sun.com/app/docs/doc/819-3283/6n5h03hsu?a=view.
For example:
<web server install dir>/bin/wadm get-virtual-server-prop --user=admin --config=CONFIG --vs=VS object-file
(a) Add the following lines as the first directive of the "default" object in the obj.conf file.
<Object name="default">
Service type="magnus-internal/php" fn="php5_execute"
</Object>
(b) Modify the PathCheck directive if you want the Web Server to handle index.php as an index for document directories.
change
PathCheck fn="find-index" index-names="index.html"
to
PathCheck fn="find-index" index-names="index.html,index.php"
Add the following line to the mime.types file to register the PHP extensions with the Web Server.
type=magnus-internal/php exts=php,php3,php4,php5
(Windows only). Add the <php install directory> to the system PATH so that web server can load the required dlls. Because the web server runs as a windows service, any change in the system PATH requires a restart to take effect.
For example:
PATH=...;C:\Sun\Webserver70\plugins\php;

You might also consider simply using the pre-compiled, comes with an installer script copy of PHP from here .
Unfortunately this version of PHP is a bit dated. Hopefully Sun will update it at some point.

HELP please! iphone not working because of 2.02 update!

So my phone is not working. AT ALL.
It just shows that I need to plug in my iphone cord and then an arrow that points to the iTunes icon. Then I've been doing that, but it prompts me in iTunes that I need to Restore. So I click restore and it says "contacting the iPhone software update server..." for 15 MINUTES now.
I am absolutely furious because I haven't been able to use my phone for 3 hours now and this is taking forever. It came out of nowhere.
I also have a stable internet connection. Is the iTunes store messed up right now? someone help please!

Sorry to hear about your problems...iTunes Store appears to be working properly right now. Did you already have the 2.0.2 update on the iPhone? If so, you should have the backup file in your computer under Users/(your user)/Library/iTunes/iPhoneSoftwareUpdates. If it isn't there, you should be able to download it from the apple site (I think). If not, you can install ANY version of the software by holding down the 'option' key while clicking 'Restore' (not sure which modifier key to hold in Windows)...this will bring you to a dialog box that will let you select a file...navigate to the above mentioned folder and choose the latest software you have. Good luck!!!

I need some help, because JAVA don´t work in browser after update 7u51 for 64bits.

... I don´t get more some sites that need to use JAVA to work.
I tried several options, but I didn´t get!!!
Java after update, it doesn´t want to work, the browser (Chrome, Firefox, Safari and Exporer) don´t get to find update and I don´t understand what i have to do.
ps.; so sorry if my english isn´t good, but I tried. ...
Thanks!
Andryea

A probable quick fix is available via the "Exception Site List" instructions here - Java™ SE Development Kit 7 Update 51 Release Notes
Long term, however, this is a security risk and recommended security policies should be adhered to
HTH
Srini

Help! Cursor won't work!

I have a Blackberry Curve 8520 and the trackpad won't work. I can select the item it is on and I can access the menu but other than that, I can't do anything else due to the fact that the trackpad doesn't work

You may try to pull the battery out first and let the phone reboot and see if it fixes the issue. If not, then it is possibly a hardware issue and you need to contact your Carrier for that.
Goodluck
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Help! - Filters Won't Work!

Hello!
I want to apply the photocopy filter on some of my pictures to create a mock coloring book.
It worked great on the first photo. However, now every photo just turns out all white. I even tried going back and redoing the first photo and that won't work now! I can't figure it out. Some of the other filters are having the same problem.
Any ideas what might be causing this?
Thanks!!!

Trashing the prefs will fix it, but a simpler fix for some "filters won't work" problems may just require hitting the "D" key to reset the foreground/background colors.

PLEASE HELP! LIVE won't work in LOGIC anymore

Hi,
This is my problem:
I happily worked on my MacBook Pro (2.33 GHz Tiger 10.4.11) for a long time, using Ableton LIVE as a ReWire slave to LOGIC and everything worked just fine.
I recently got myself a Mac Pro (2 x 3.2 GHz Quad-core 4 GB RAM) and on which Logic seems to be running fine by itself (as does LIVE), but as soon as I open any of my documents created on my laptop (files that were created in ReWire mode) there seems to be a latency issue, as in some of the tracks don't quite play on time and then when I quit LIVE it crashes and LOGIC crashes a couple of seconds after that too.
This happens also when I open an empty LOGIC file and start LIVE - again empty. A weird thing I noticed is that LIVE doesn't seem to crash when I quit, if I haven't pressed play. Only after playing something either in LOGIC or in LIVE do I get the crashes.
If anyone has got any suggestions for this I'd be SOO grateful - I've been searching the internet and forums all day and can't seem to find any answers for this weird problem ... Could it be something to do with Leopard?
PLEASE HELP!

Also, Connection Doctor says I'm connected to the
internet just fine.
The Connection Doctor in Mail should list your email accounts and whether it can access them.
Sounds like Mail has gotten confused about your .mac password. In Mail, go up to the menu bar Mail, go down to Preferences, select your .mac account and re-enter your password under "Incoming Mail Server".
You may also have to re-enter your password under "Outgoing Mail Server" also.

HT1620 Need help. Update won't work, please help

When I did my update I forgot to turn off my lock passcode. It never completed installing. I have no idea how to get it to work. A newer update showed up and my phone won't let me do it. Any help will be extremely helpful. First iPhone. Thanks in advance.

When I go into settings. It says I have an update to do. I able to tap on it and it will go through the process just to say that there was an Error 7.1.1. Or something like that. If I can't get this to work I want to get another phone. My fiancé and I have the same iPhone 4S and he's had no problem updating at all. I hope you can help. Thank you

Help please - unable to open missing photos 'browse' dialogue box

Hi All,
new to the forum, but long time LR user.
I have a problem with LR v.3.4.1 I have a few missing photos (quite a few actually) in my catalogue from when I moved hard drives in v1. I jumped from v.1 to v3. But used to be able to find them still.
Now when I click the ? icon the browse dialogue box won't open. Double clicking only switches from thumnail to full size - though there are no index images of these photos.
I've checked the drives, the images still exist. I tried re-iporting the images to see if that would bring them up as duplicates, but the LR finder would not see any images there.
Since switching from v.1 to v.3 I have done quite a few shoots, and I'd be sad (no mortified!) to loose either bit of editing work.
Any help greatly appreciated.
Many thanks
Damian

I should say, this is the case for both my Macbook Pro running v10.5.8
and my new today, iMac running v10.6.7

Help, Please. .f4v won't work in browser?!?

Similar Messages

Maybe you are looking for