Help please - failed RAID config

Hi,
I have a large problem with my external drives.
I had 2 existing Lacie firewire drives mirrored with all photos and music on it and just added two new drives (which I was going to setup as a backup pair).
Unfortunately one of the drives on the existing RAID config had a logical fail (I have a screen print). However the logical drive was still mounted and data was accessible. Before I issued a rebuild I was investigating a possible naming issue and now both disks are showing a failed status. This may have been caused by powering off drives before an unmount.
Anyway, I am sure the data is still on both drives. How can I recover the data from either disk.

OUCH!
First try Disk Utility to just Check the RAID Volume... see what it says.
If it looks like a no-go, then perhaps...
http://www.filebuzz.com/fileinfo/35240/BoomerangData_Recovery_MACOSX.html
I have these but don't know if it/they recovers/fixes RAIDs...
http://prosoftengineering.com/products/datarescueinfo.php?PHPSESSID=d207fcba7a15546aa65eed496d564fc5
http://prosoftengineering.com/products/drivegeniusinfo.php?PHPSESSID=d207fcba7a15546aa65eed496d564fc5

Similar Messages

  • Help please Problem Raid K8N Diamond Plus

    I have a PC with mather board K8N Diamond Plus 2HD maxtor 80gb (6V080E0) sata II. You can help me I am becoming crazy I must mistake in the bios or in the raid, I just do not succeed to install windows on 2 HD Sata II are compatibility problems?   
    Thank

    Welcome!!
    Firstly, may I suggest you give as much system information as possible, this will help us to assist!!
    Second, I recently set up my RAID 0 and had an XP installation problem, but I believe mine was caused by my motherboard not liking the new 1.2BIOS.
    As soon as I went back to the default (1.0) BIOS, no probs!

  • Help with initial RAID config

    Hello there,
    I am setting up a law office to move from PCs to Macs. About 12 client workstations in two offices. There is a WAN VPN tunnel between the offices.
    I have two questions. The first concerns the setup of the headless Mac Pro Server, which came with 4 one TB drives. My initial instinct was to make a single RAID 5 set out of these drives with a 200 GB volume for system, 1 TB for user and service data and ~500 GB for time machine. I realize I will have to install a monitor to run the RAID utility to accomplish this. Any advise/wisdom would be greatly appreciated.
    My second question concerns the remote office. The office has about 50 Gig of current files for user work and I would like to implement full folder replication of this shared data between the two offices. I've looked into CCC/Bombich and he does not reccomend CCC for replication. Any ideas in that area?
    Sincerely,
    Barn

    Thank you for the response MAk.
    I very much appreciate your description of TM. It confirms some of the worries I had about it. This is my first server deployment, outside of a lab. I was thinking the users could backup the clients using TM, and that the suitcases could be managed and eventually moved to off-line media--perhaps I am mistaken.
    I intend to use CCC for the server itself, and manage and test those backups regularly. I have some familiarity with command-line UNIX stuff from previous lifetimes, and am willing to give rsync a try for folder replication. The office has a lot of data spread out in a fairly flat fashion so I wanted to do folder replication for performance reasons--for sharing documents between two offices--backup would be handled seperately. The remote office will have a 1 TB mini OSX server for this purpose and for a directory replica.
    Update: The setup went fine (with borrowed monitor). 2.61 TB RAID 5 set! I have a few test accounts logging in on directory, and am managing to keep acocunt names from matching (the local vs. directory account thing). I have some more testing to do but so far directory users, with a network home at //srvr/volumes/usr/Users works great, at least if I wait five minutes or so after hitting "Create Home Now".
    Add-on question: Is there a way to have network home folders sync with local/client home folders for performance reasons? MS does this with mapped folders and off-line synchronization. I may want to do this for some users that travel, and I will definitely need to do this for check-out MacBooks. This is something I have not seen covered in the Server Essentials nor in Support Essentials, or perhaps I skipped over it.
    Barn

  • Please help - Motherboard fails to boot on power up

    I could really do with some help here please as my motherboard fails to boot on power up.
    I get the message "
    Reboot & select proper boot device or install boot media in selected boot device and press a key"
    When I press a key I get the same message.
    When I press the reset key the system boots into XP ok from the Raid Array.
    BIOS settings are to boot from raid
    HELP PLEASE as I need to get the system stable before I flash the BIOS with and upgrade.
    Thanks
    John
    ps no disks in CD or FDD beforte anyone suggests that :-)

    Quote from: BOSSKILLER on 24-January-08, 22:38:11
    memory not listed? Do a memory check with Memtest86
    My memory is Crucial 2x512MB 240-Pin DIMM PC2-6400 Unbuffered CAS4 (as per my signature)
    I have run memtest86 v1.70 from boot cd and all looks fine.
    What PSU you use too? List details, look for them over PSU sticker
    I have a 450 W  PSU
    spec is
    +3.3v  32A
    +5V     34A
    +12v   18A
    -5V      1A
    -12V     1A
    +5Vsb   2A
    Hope that throws some light on things?
    Thx for helping 
    John

  • Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?

    Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
    The following was done so far:
    1. Windows Firewall - new rule created for itunes.
    2. iTunes - latest version installed.
    3. LAN setting : automatic detection of proxy is enabled;
    4. iTunes diagnostics shows:
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    TOSHIBA Satellite L655
    iTunes 11.0.2.26
    QuickTime 7.7.3
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 003FB880034B7720
    Current user is not an administrator.
    The current local date and time is 2013-04-23 11:01:14.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
    Description:          Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 08:00:00 1970
    Lease Expires:          Thu Jan 01 08:00:00 1970
    DNS Servers:
    Adapter Name:          {8140112A-43D0-41D6-8B36-BE146C811173}
    Description:          Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
    IP Address:          10.5.7.196
    Subnet Mask:          255.255.0.0
    Default Gateway:          10.5.0.1
    DHCP Enabled:          Yes
    DHCP Server:          172.18.255.2
    Lease Obtained:          Tue Apr 23 10:14:40 2013
    Lease Expires:          Tue Apr 23 22:14:40 2013
    DNS Servers:          121.97.59.7
                        121.97.59.2
                        121.97.59.3
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was unsuccessful.
    The network connection timed out.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    Last successful iTunes Store access was 2013-03-22 10:05:31.
    @@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"

    hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.

  • HT201263 my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into rcovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please

    my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???

    By the way, i am using Windows 7 x64 and updated itunes

  • Having installed Aperture iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

    Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

    OK, fixed it.  Found that iPhoto is now BACK in the App store.
    Found iPhoto app in Finder and dragged it to Trash.
    Downloaded iPhoto from App store and all now back working again.
    Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
    Nige

  • I have Adobe CC, and the InDesign & Ps Apps.  When I download the update they fail (49)  Help please

    I have downloaded Adobe CC, and the InDesign & Photoshop Apps.  When I download their updates, they fail (49)  Help please!

    Spoke too soon, error report.
    Adobe CSXS Extensions 4
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe Photoshop 14.2.1
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Photoshop Camera Raw 8.4.1(CC)
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Adobe Media Encoder CC 7.2.2 Update
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Adobe InDesign CC (64 bit) Update
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Dynamic Link Media Server 7.0.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe CSXS Infrastructure 4
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe ShareOnBehance 1.0.3
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    DPS Desktop Tools CC 30.0.1 Update
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Adobe InDesign CC Update
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49

  • I am trying to download Firefox 3.6 to use on my Mac OS X version 10.3.9. Three attempts and I continue to get "mounting failed" and "corrupt image". Help please?

    I am trying to download Firefox 3.6 to use on my Mac OS X version 10.3.9. Three attempts and I continue to get "mounting failed" and "corrupt image". Help please?

    Firefox 3.6 requires at least OS X 10.4, the last version of Firefox that worked on OS X 10.3.9 was Firefox 2.0.0.20 which is available from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/

  • IPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody

    iPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

  • When trying to burn a blank audio cd from an existing playlist, it fails and advises error number 4450 - anyone able to help please? thanks

    when trying to burn a blank audio cd from an existing playlist, it fails and advises error number 4450 - anyone able to help please? many thanks

    Hello totallyabsorbed,
    Thanks for using Apple Support Communities.
    To troubleshoot issues burning CDs in iTunes on a Windows PC, please start with the troubleshooting in the following article:
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    Take care,
    Alex H.

  • TS3899 I keep getting " The connection to server failed" but I can get internet connection. Can anyone help please

    I keep getting "The connection to the server has failed" when I call up my mail although I do get internet connection. Can anyone help please.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!

    I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!

    Disable or turn off all firewall and anti-virus software and try the download again.
    Stedman

  • HT1329 Hi All - My hard drive failed and I am trying to move all my music from my ipod to the new hard drive. I am operating on Win 7 64 bit. Can anyone help please?

    Hi All,
    My hard drive crashed and is no longer usable. I just installed a new drive however, I am not finding any way to export my recorded CD's from the Ipod touch to the new hard drive. Can anyone help please? I thought by enabling syc with Ipod woudl do it but to no avail.
    Thanks

    I used a 3rd party program called copytrans http://www.copytrans.net/ that is not free to move my library from my ipod to my itunes library when I had to start from scratch.  After that happened I started backing up my music that purchased from the itunes store to a dvd so I would always have it if things went south.  Now I always backup my purchased digital music to an optical disc just in case plus everythng else I have is on retail cd's so I can just rebuild my library from scratch again if I have to.  You should also regularly back up your itunes media folder to another disc so your entire library will be backed up just in case you should lose your program drive.

  • Windows 7 fail 10.5.8 help please!!!

    can open Itunes no problem but if i click on ANYTHING it crashes help please!!!

    Lets see whether this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?

Maybe you are looking for

  • A lot of questions about my MacBook Air

    I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about

  • Problem with File Polling

    Hi,  Experts I have following problem poll interval is 900 sec in my sender file adapter, but the file adapter is picking up the file 5  times at a time and IS processing them.Like tis it is happening every 900 sec. but i need file adapter to pick up

  • Firefox does not open, profile manager does not open, not listed in task manager

    firefox worked fine about two days back. Our norton expired so I downloaded Kaspersky Anti-Virus 12.0.0.374. I don't know if that has any connection to firefox not working. I click on the icon, nothing happens. The task is not mentioned in the task m

  • If you block a phone number in iMessage on the iPad, does it also block it on the iPhone?

    If you block a phone number in iMessage on the iPad, does it also block it on the iPhone?

  • Errors in compile

    anybody know why i get the three errors - see bottom of code below <% // connecting to the database public Connection getConnection() { Connection conn = null; try { String userid = "ddavidson"; String password = "8132"; String driver = "sun.jdbc.odb