Help please - Flash install fails on Mac OSX 10.9.5

Installing Version 16.0.0.235 for Firefox on Mac runnng OS X 10.9.5
A brief glimpse of white progress bar at 0% appears then dissapears from the grey install screen when you run the install. The grey box then just sits there.
I have followed all the troubleshooting advice. I have de-installed flash then rebooted and tried again. I have done this twice just to make sure, but to no avail?
Has anyone got any ideas?

That is correct Das_Sad.  CS2 will not run on Intel based processors under Mac OS.  You will need to find a Mac computer with a PowerPC processor if you wish to run Creative Suite 2.

Similar Messages

  • Flash fails for Mac OSX

    I just cannot install the free Flash Player 9 for Mac OSX
    (PowerPC). I get an "Access denied Error 1008:5,-5000" , then "You
    do not have enough access privileges for this installation". I've
    installed/uninstalled countless times and even tried to install
    older Player versions. No success.
    And when I access webpages viia my Safari 1.3.2 ( on Mac OSX
    10.3.9), any Flash content gets a box saying there's no MIME plugin
    "application/x-shockwave-flash". It then sends me to the Player
    download page all over again!
    I have Quicktime Pro 7.1.6 and have ticked all its MIME
    settings...
    So far nothing via Adobe or Apple has worked...
    Help! (another one for Adobe's Bentley Wolfe?)

    Mike, thank you very much for your help. Luckily I have found the 
    right Flash version: 10.1.102.64
    Am 05.02.2014 um 20:55 schrieb Mike M:
    Re: flash player for MAC OSX 10.5.8
    created by Mike M in Installing Flash Player - View the full 
    discussion
    Flash Player 10.3.183.90
    >
    That's a zip file containing BOTH Windows and Mac versions.
    You'll find a debug folder and a 10.3.183.90 folder. It's in the 
    latter. It'll be a DMG named 10_3_183_90.dmg.
    >
    Is your Mac Intel or PowerPC?
    Please note that the Adobe Forums do not accept email attachments. 
    If you want to embed a screen image in your message please visit the 
    thread in the forum to embed the image at http://forums.adobe.com/message/6089591#6089591
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/6089591#6089591
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/6089591#6089591
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Installing Flash Player at Adobe Community
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/thread/416458?tstart=0

  • Can't install flashplayer on Mac OSX v.10.6.8

    Can't install flashplayer on Mac OSX v.10.6.8  I get "missing plug-in" message whenever I try to run a clip. Nothing will run--utube, news clips, nothing.  I have uninstalled and then reinstalled flashplayer. what do I need to do???

    Download the offline installer here: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
    If it won't download directly, right click and "Save as"
    Go to: Mac HD/Library/Internet Plugins
    Trash the Flash Player.plugin file from there
    Go to: Mac HD/Library/Application Support/Adobe
    Trash the Flash Player folder (the whole folder)
    Empty the trash
    Reboot
    Mount the DMG and run the installer.
    BEFORE opening any Flash content in Safari, open Safari>Preferences, and check the Security tab to make sure "Allow all other plugins" is checked.

  • When downloading a pdf file I get a message that I must download Adobe Reader. When I do that I am told that it is already installed. Why can't I use it if it's already installed. I-Mac OsX 9.3

    When downloading a pdf file I get a message that I must download Adobe Reader. When I do that I am told that it is already installed. Why can't I use it if it's already installed. I-Mac OsX 9.3

    g -
    I was able to fix the problem with some help from Apple. Whenever I last downloaded Reader, I apparently didn’t complete the process by accepting the Reader contract. I was able to go right to that point in the process and complete the installation. The messages that I needed Reader but it was already installed were quite confusing. It would have been nice if the Adobe installation process that I was re-trying this morning had been able to detect a partial installation. The Troubleshooting page almost had me doing some ridiculous things that wouldn’t have helped.
    MP

  • How to install freehand on Mac OSX 10.8 operating system

    How to install freehand on Mac OSX 10.8 operating system

    soniamp wrote:
    How to install freehand on Mac OSX 10.8 operating system
    1.  Installing Snow Leopard Server into Parallels for DUMMIES:
    http://forums.macrumors.com/showthread.php?t=1365439
    2.  Adobe's official patch for Freehand MX to run in Snow Leopard:
    http://helpx.adobe.com/freehand/kb/cant-launch-freehand-mx-mac.html
    Freehand MX running in Snow Leopard Server installed in Parallels for use in Lion, Mt. Lion and Mavericks:
                                  [click on image to enlarge]

  • HELP PLEASE cannot install Mac Osx

    hey I really need help please!
    I tried to modified my dock using my resources folder in the dock components but I surely did something wrong cause when I tried to click on time machine, it said that I need the right osx version.
    So I restarted my computer but it just wont start, i see the spinning gear over and over again. So i decided to reinstall mac os x tiger and to reupgrade to leopard afterwards.
    I restart m computer, hold C, get to the install process and when I need to choose my volume, I choose my HD, the one in the iMac but its says cannot install on it because of a Volumecheck problem...
    I really need to reinstall it without loosing my data on it I have some important photos for my work, I NEED THEM!
    HELP!

    Hello and welcome to the Apple boards
    If you have been using Time Machine, you can restore your system from it using the Leopard DVD and following the instructions on this link:
    http://www.peachpit.com/articles/article.aspx?p=1091577&seqNum=6
    You might first try booting from the DVD and repairing your HD first. The tools are in the Utility folder on the DVD
    You boot into the DVD by starting the computer and holding down the "C" key.
    Hope this helps a bit.

  • I can't get FLASH to Instal on my MAC  OSX 10.8.5  Beyand Frustrating!

    I have tried several times over the past 36 months to get the updates version of FLASH to install on my MAC.  It just won't do it.  I have gone to the Adobe Trouble shooting guide and followed all the steps.  Please help.  I am beyond frustrated!!!!!

    I did all that stuff that is referenced in Installation problems | Flash Player | Mac?
    I have no idea what a "Log File" is.....so  I would have an easier flying to the Moon than figure that out.
    What occurs is this:
    1) I download the Adobe Flash Player Installer
    2) I start the Install
    3) I ALWAYS get the same message at roughly 82% Install:  "Error: General Installation Error". 
    This is the same thing that happens over and over.  I have done everything that is referenced in the Installation problems | Flash Player | Mac post.
    On another note, I have ALWAYS been able to ib=nstall FLASH on every update up until about 6 months ago.  I know my original Post said "the past 36 months", but I meant to say the past 6 months.
    Thanks,
    Sam
    It is the same failure every time.
    Thanks,
    Sam  
    Sam Sharpe
    Virtual Tours Of Charlotte
    The Fusion of Vision and Light
    704.905.4722
    www.VTC-Home.com

  • Installed Flash player on my Mac osx 10.5.8 but doesn't work

    The installation went fine. I've actually installed it over and over again. But programs that require it (show up as a browse button for photos) don;t work. I can't see where the flash player is installed on my computer either. Please help. Thanks, Hilary

    Call Apple and file a formal complaint, it's Apple that is not supplying security or patches to 10.5 users and expects everyone to be computer guru's.
    16.5% of Mac users are on 10.5 and Apple just denies security and stability updates to force you to upgrade your OS or your hardware prematurely.
    There is a massive botnet of over 600,000 Mac's and the prime location is on 10.5 Intel Mac's which they refuse to fix.
    Appe's "solution" is for you to upgrade your operating system to 10.6 or even 10.7 (this will make your machine slow and won't run a lot of your software, another "problem")
    http://roaringapps.com/apps:table
    IMO 10.6  would be best for you, the least trouble, but you bought a Mac for it to "just work" as your not "into" computers, your just a regular user like most Apple's customers.
    So call Apple and complain, then buy the 10.6.3 retail disk and stick it into your machine and upgrade and cross your fingers and update to 10.6.8. 
    Backup your persona data off the machine first to a storage drive and disconnect.
     Most commonly used backup methods explained
    Once your on 10.6.3 use software update to get to 10.6.8, then you can install Flash.
    Harden your Mac against malware attacks

  • I cannot install flash player on my MAC - (osx 10.8.4) - it downloads 50%, then clicks to "finish"

    I cannot install flash player on my Mac - running OSX 10.8.4 and Safari 6.0.5.  The progress bar show is as  downloading to 50%, then converts to "installing" and immediately goes to 100% and says it's installed. But it's not.  I get another Adobe Flash installer icon on my desktop instead.  Help!

    Hello,
    Welcome to Adobe Forums.
    First, remove Adobe Flash Player completely using Flash Player uninstaller for MAC : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
    Download offline installer for Adobe Flash Player (MAC) from here : http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
    Once the file is downloaded, run the installer
    Thanks,
    Vikram

  • How do I install flash player on my mac OSX 10.6.8

    I am stuggling to figure out how to install flash player to my mac it was working last week? I go to download it and it looks like it is but then it dissapears and the videos wont play?  I must be totally stupid!!! Please help....

    Try un-installing and then re-installing.
    Adobe Flash Uninstaller
    Adobe Flash Player
    Adobe Flash Player updates available for OS X on October 24, 2014

  • Help, pleeeese,. lost disk 2 of mac osx install cds

    I have lost my Powerbook G4 Mac OS X Install Disk 2 and its asking for disk 2! can anyone help please?
    I have tried my original Tiger 10.4 DVD and it won't boot of that either, just sits on a blue screen.
    Can anyone help please?
    on the CD it states:
    Mac OS Version 10.4.2
    AHT version 2.5.2
    Desc version 1.0
    2Z691-5534-A
    thanks for any help.
    My powerbook is not an intel one, its the previous one

    If you attempt to install an operating system with third party peripherals attached, the installer may not have drivers for that peripheral.
    If you attempt to install an operating system with bad RAM or RAM that isn't to spec, that may also cause problems.
    If you attempt to install an operating system with insufficient hard disk space, or RAM, that can also be a problem.
    I'd have your friend start a new thread so we can troubleshoot his issue. My FAQ here may be applicable:
    http://www.macmaps.com/kernelpanic.html

  • Help please flash will not install.

    Hi tried all day to install flash on my first macbook. Tried everything. uninstalled, firewall is off, safari plug-ins enabled. Any help please?

    Thank you to Mike M for your post in Oct 2013. Followed it and it worked first time. What a waste of a day.

  • How do i install flash player on my Mac OSX Maverick

    Anyone tell me how to install flash player on my Mac, completely new to Mac!!

    https://get.adobe.com/flashplayer/
    Always up your system prior to installing any third party software.

  • Why won't Flash install on my MAC?

    How come adobe customer service won't help me? It's really
    annoying that they can't help over the phone and I just have to
    cross my fingers and hope someone knows what's going on in the
    forum. Please, help.
    I had flash installed fine and then one day it suddenly would
    not work. It said I did not have the plug in blah blah so I
    reinstalled it and still, all it does is bring me to the adobe
    website and say it can't locate my plug-in. I've tried on Safari
    and Firefox. I know it is being installed for all of my browsers.
    I've also tried updating my browsers as well as uninstalling and
    reinstalling flash and nothing works.

    Hello,
    Please try downloading the Flash from following link:
    http://get.adobe.com/flashplayer/otherversions/
    Please choose "Mac OSX.." in step 1 and "Flash Player 15.." in Step 2.
    You should be able to download the Flash Player then.
    Regards,
    Anoop

  • From where to download and install applications for MAC-OSX.

    hello everyone,
    I am trying to develop experimental HLS server and for that i need following cmd-line tools for my MAC-OSX-10.6.8.
    I have read some where that these tools are there from OSX version number 10.6 but I have only "mediastreamsegmenter"command on my MAC machine.
    I am very new to MAC environment and I don't know how to download/install new libraries and applications for MAC. 
    Can someone please provide some help,
    from where to download and install these cmd-line tools?
    I need following tools:
    1. mediastreamsegmenter
    2. mediafilesegmenter
    3. mediastreamvalidator.
    4. variantplaylistcreator
    Thanks

    Maybe this http://stackoverflow.com/questions/2973411/implementing-apples-http-live-streami ng-problem-with-mediafilesegmenter-tool can help you.
    Stefan

Maybe you are looking for

  • Need help in implementing a note

    Gurus ,   i need your help in implemnting the SAP NOTE "873422 - Error when sending an e-mail" I am not suer how to proceed to implement the correction speified in that note . it would be of great help if any body can explain me in brief  to implemen

  • How can we get the Latest Resource Assigned in the Approval Form

    I was wondering if there is any way to get the Latest Assigned Resources to a User in my Approval Form. I tried this <ref>waveset.resourceAssignments</ref> but it returned all the Resources assigned to a User. While creating a User with Resource Assi

  • NQSError 15018 Incorrectly defined logical table source  error

    Hi, I am getting the following error when I am building one of my reports. I have 3 dimensions - Time, customer and Product and two facts F1 and F2. Both F1 and F2 are joined to all three dimensions The part I dont understand is that when I built a r

  • Backup and Recovery in different mode

    We have a database in noarchivelog mode. Currently we convert it to archivelog mode before monthly full database RMAN backup. And after backup,we again back it to noarchivelog mode. Now my question is that, in case of failure can we recover this data

  • Highlight ALV cells conditionally?

    Good afternoon Iu2019ve been introduced to the following way of ALV generation by some colleagues, but would like to know if there is a way to highlight certain cells conditionally? The highlighting could be anything from a different font to a differ