Help please... for On-Line....

Hello all,
We are currently using webForms and Reports version 6i and hosted on 9iAS (rel 1) and we are in the process of upgrading to 10g (both development and web server).
Also, we have a quick reference guide (desk top reference in document format) for users on how to use the application. My question is, how can we integrate this help guide to make it an online help or what tools goes with this webForms 6i/10g?[[/b]u]
Any help or pointers are appreciated.
Thanks in advance,
Arun.

how about the HOST command which pops up the document in a browser window?
Regards
Grant Ronald
Forms Product Management

Similar Messages

  • NEED HELP PLEASE / GREEN LIGHT LINE IN EDITING TIME LINE

    Hello,
    I am editing a video using premier 6.5.
    When I render the video edited the red line in the work space pass to dark green what is normal, but also appears a smal portion of the video with a light green line in the rendered area.
    When i play the video and the reader pass through this light green part the sound sudently increasy 80%.
    I tried everything even re editing that section but the light green line keep appearing after rendering and the sound problem back.
    This part of the editing where the light green line is have many sound tracks but the sound level is the same to the rest of video so dont understand why that happen
    can anyone help please?

    Hi thanks for your reply.
    When i render the time line a dark green line appears...as u say that show the working area has been rendered but in this case also other extra line appears in part of the video ( only in a section) the line is light green ...diferent to the other
    when I play video and pass though this light green line the music tract gets extra loud 80% higher.
    When I play again the video to check if the other parts has been affected I can see all sound levels have changed and need to use audio mixer to balance them again. In spite of that when pass thought light green line all happen again.
    could be that the sound tracks have different formats? in that section where the problrem is I have 6 diferent sound tracks overlaped but the sound level is the same for all so do not understand why when i render appear this green extra line

  • Help please for a newbe - retrieving a slide show

    Help please.
    I have spent a couple of hours producing my first slide show. I didn't have time to finish it and saved it as instructed in Photoshop Elements.
    Now I can't find it! I can't find any buttons to allow me to get the project into Photoshop Elements. I have looked at the help section and it is silent on the matter.
    Probably a simple question for you people - but can someone please talk me through retrieving my part finished work.
    Many thanks

      Yes Adobe seems to hide the files away. On the Windows platform they are normally found in the projects folder under ProgramData on the hard drive (click image below for full file path)
     

  • Help please for restore contact

    Hello for all
    I got a problem and i lost all my contact in iPhone when i made sync with my mac, my mistake it was i delete all contact in address book , and when i made the sync i lost all my contact.
    can i restore by any way ???????
    please i am looking for your respond and your help
    thanks

    Welcome to the discussions,
    In case you did not sync your phone after that, your last backup may contain these infos as well and restoring from this backup will bring your contacts back.
    Restoring: http://support.apple.com/kb/HT1414
    If not possible, you can only get your contacts back if you have a backup of your iphone backup folder included in your back up routine. Restore it again at it's place here: ~/Library/Application Support/MobileSync/Backup/.
    For more info see this article about backups: http://support.apple.com/kb/HT1766

  • HELP PLEASE for Flash Player 11 Intallation for MAC OS X 10.9.1

    It will download and STOP at 7%! Getting a bit frustrated and don't know what to do... Please help... Thank you!

    Bypass the installer-downloader.
    Flash Player (for Mac OS X)

  • Display of eBay Sales Manager Sold Page to wide for screen. Scrolling is driving me mad. Help please for Newbie to Mac!

    I have a new Mac Book Pro 13” & an iPad for my Amazon and eBay business. I have been a PC user.  The problem relates to both.
    On my eBay Manager Sold page, the display of the page is wider than my screen. I use Safari and all other webpages are fine apart from this and a couple of other eBay Sales Manager pages.  I have tried using the eBay default column widths for the Sold display page & also setting the widths of the Sold columns to my own preferences.  However, on each page refresh the display page width reverts meaning I am having to scroll left and right to see full details of each sale.
    Help would be much appreciated as it is driving me mad.  I have tried all the usual things - page display, clearing cookies, restarting computer but nothing helps. 

    Hey mylittlefleur,
    Sounds like the eBay Manager Sold page expects a very wide window.
    Does the content get too small if you zoom out the window?
    Zoom in on webpages - Safari Help
    Make the webpage content larger: Choose View > Zoom In, press Command (⌘)–Plus Sign (+), or pinch open on your trackpad. To make only text larger, choose View > Zoom Text Only before you zoom in.
    Set a minimum font size for webpages: Choose Safari > Preferences, click Advanced, then select “Never use font sizes smaller than.” Click the pop-up menu and choose the minimum font size you want.
    Expand to full-screen view: Click the green full-screen button in the top-left corner of the browser window, or press Control-Command (⌘)-F. To return to standard view, move the pointer to the top-left corner of the screen, then click the green full-screen button again, or press Control-Command (⌘)-F.
    Of course you can zoom out to see more.
    Nubz

  • Help please for compilation error

    I have made an utility app.
    I have used CFHTTPMessageRef class from CoreServices.h
    This works fine with me for Simulator.
    Now when i change Active SDK to Device it gives compilation error :
    1) No such file or directory : <CoreServices/CoreServices.h>
    2) Syntax error before CFHTTPMessageRef.
    While reading i came to know that CoreServices is available only for Simulator and not for device(Correct me if wrong).
    I also added CFNetwork framework for linking in build settings.
    Can anybody suggest something on this...

    Hi, i've used some types like CFHostRef in one of my apps, so it should work. I will look into the sourcecode to see what headerfiles i've included.
    i'll be back later this day.

  • Help please for an xmas present for my retired father

    Hello all,
    My dad recently retired from his job after a heart attack and after a long recovery has gone out and treated himself with a brand new imac and Final Cut Studio 2.
    He loves video editing and I would really like to buy him some training materials for his version of Final Cut. I have come across these training DVDs at Total Training - http://www.totaltraining.com/prod/apple/finalcut.asp
    Would the DVDs on the above link provide a good background for Final Cut Studio 2? Only reason I ask is that they are not made specifically for Final Cut Studio 2, and not knowing anything about the program myself, wanted to know if there is much difference.
    Which (if any) would be the most appropriate to buy?
    Kind regards
    Hergs

    I like the Lynda.com suggestion also. Larry Jordan has some tutorials specifically dealing with the changes in FCPS2. The rest of the training for FCP5.1 is pretty much unchanged through the newest version. A good value for 25 bucks. Plus, you can go look at any other stuff when your head is full of FCP. The Ripple training series, from what I've seen, are very well done also. Too many good resources to mention without accidently leaving someone out.
    --Bob

  • Syncing help please for iPad 2 and iPod Touch 4g on new Macbook Air

    Hello,
    My name Christine Bergeron and i'm 14 years old i just got the iPad 2. I also just recently got the new MacBook Air 13-inch about a week and a half ago- two weeks. I tried syncing my iPod Touch 4g to my laptop but only 3 apps come up out of like 80 something and when i try to sync them it says it will replace the apps on my laptop (the 3 apps) with those 3. i'm also trying to do the same with my iPad but i don't want to loose everything. iTunes also downloads like half of my music and i don't know how to get the rest. Help!!!!
    Thanks,
    Christine Bergeron

    Launch Messages on your MBAir.
    From the Messages menu bar top of your screen click Messages > Preferences then select the Accounts tab.
    Select your iCloud account on the left then select:  Enable this account

  • I'm trying to put some tunes on my daughters Ipod from my Itunes but cant copy them Help please

    I'm trying to put some tunes on my daughters Ipod from my Itunes but cant copy them Help please

    - For iTunes purchares:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - For other music you need a third-party program like one of those discussed here:
    newer copy

  • I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

    I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Please Help me...For loose line fixer

    Hi,
    I just want to try a script for fixing loose lines automatically. My concept is,
    1) Finding the wrod space width.
    2) Depending on the width value, fix desired width value. I know it may vary for each character and fonts.
    3) If finding any over widthed space inside the para, i need to give tracking from value -1 to -10 untill we reached desired width. If not possible retain to zero tracking(original state). We don't need to check this for single line para, so just skip that.
    My client SOP:
    1) H&J values should not changes.
    2) Single line composer alone used
    3) Single line tracking not used.
    4) Positive tracking not allowed
    5) Tracking value should between -1 to -10.
    Is it possible?
    Thanks in Advance.

    Hi ,
    My friend gave me a little script to find space width of paragraph.
    //Setting preferences to point and
    //set page rulers to pageOrigin
    var myDoc = app.activeDocument;
    myDoc.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;
    myDoc.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;
    myDoc.viewPreferences.rulerOrigin = RulerOrigin.PAGE_ORIGIN;
    myDoc.zeroPoint = [0, 0];
    var docStories = myDoc.stories;
    for (var st=0; st<docStories.length; st++){
        var paras = docStories[st].paragraphs;
        ClearGrepPreferences();
        for (var p=0; p<paras.length; p++){
            if (paras[p].lines.length>1){
                app.findGrepPreferences.findWhat = " ";//Find All spaces in current paragraph
                var spaces = paras[p].findGrep();
                if (spaces.length>0){
                    spaceWidth = spaces[0].endHorizontalOffset-spaces[0].horizontalOffset;//end position - start position gives the width of the space character
                    alert("Paragraph "+(p+1)+" Space Width = "+spaceWidth);
                }//End of if loop lines >1
            }//End  of "p" for loop
        }//End of stories for loop
    function ClearGrepPreferences(){
        app.findGrepPreferences = NothingEnum.NOTHING;
        app.changeGrepPreferences = NothingEnum.NOTHING;
        app.findTextPreferences = NothingEnum.NOTHING
        app.changeTextPreferences = NothingEnum.NOTHING
    From this script, i want to find the average space width of entire document (it actually find the space of each para). It will saved in the variable  spaceWidth. Then the script ask user for giving a desired space width. Let say, userSpace. Then it will compare the userSpace with   spaceWidth. If the space Width is more than userSpace value,  then allow tracking from -1 to -10 using FOR loop to get desired value. If it will not get desired then retain the para tracking as zero and skip to next para.
    Am i get any help from this point?
    Advance thanks

  • I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.

    I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.

    well i have to be honest, but i don't know if it the vista you use has any significance for this. but you can try.
    okay follow:
    1: click "start" on the status line on the buttom of your screen.
    2: then click on "all Programs" and find "Accessories" and find the "command prompt"
    3: Right click with your mouse "command prompt" and click on "run as administrator"
    (as you has click'd on "run as administrator", "command prompt" should appear.)
    4: when it appears you need to type this "netsh windsock reset"
    5: wait for your computer to registrer the command you gave it, and restart your computer.
    then erverything should be pretty much as good or better then new.

  • I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.​Please help me for that.

    I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
    1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
    ible?
    (2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
    (3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
    (4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

    Hi Vishal,
    I'll try to answer your questions as best I can.
    1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
    2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
    3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
    4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
    Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
    Ron

  • Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.

  • New/Additional phone line question- help please!

    Hi
    I am after some advice, and every time I call BT I get passed around as I am not 100% on what to ask for, or who I should speak to.
    Basically, we have 2 phone lines coming into the house.  One line/number + broadband signal goes via a repeater to the office which is a separate building across the garden (approx 300m but I am not sure on the actual distance).  The signal is not great, for the broadband particularly - often drops out etc.  To solve this we would like a new physical line installed in the office building to give us a separate phone and broadband package to that of the main house, but ideally keeping the same number as we currently use in the office.  The office is used everyday for working from home and so is important to us.
    Does that make sense?  I fully expect that an engineer will need to look at the site, and there will be a (significant) charge for the line to be installed (underground pipe work for cables already exists from house to office building and so this could be utilised).  Do I just place an order for a new line online, and wait for an engineer's visit?  Can I deal with changing the number at a later date if that is easier for the system to deal with?  Last time I rang BT, I was told I needed to speak to the exceptions team, when I was put through to them she told me all I needed to do was speak to customer services, customer services thought I was trying to move home and then didn't seem to understand what I needed (but it was probably how I was explaining it!).
    I would be so grateful if someone could point me in the right direction, or give me tips on what to ask for.  My main worry is keeping the same phone number as it would be so much easier.
    Thanks in advance
    MPA

    this link may help http://www.openreach.co.uk/orpg/home/network/whoar​eyou/selfbuild/selfbuild.do
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Maybe you are looking for