"HELP PLEASE" GPS Marine Signals for my 61001 Noki...

"SOMEONE HELP PLEASE"
I have a Nokia 61001 Navigater Mobile.
Is it possible? To enter GPS Sites for fishing into my
Nokia 61001?
Someone did say it is possible who already own's one.Unfortunately,I lost his telephone number.
Any help would be most appreciated,
Regards,
chase444.

Hi chase444
If you look in your "inbox" there is a PM for you with some information on Nokia LMX files for POI.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • New problem from "Help please-"Application Not Responding" for Safari a

    Now- when I close Font Book, my Address Book, LimeWire, and Disk Utility won't open.
    As long as I have Font Book open, they will,
    Any suggestions?
    Thanks.

    There are three Fonts folders: /System/Library/Fonts/, /Library/Fonts/, and /Home/Library/Fonts/. The first is restricted only to system access, the second to all users access, and the third to the specific user account access. You will find this similar organization for numerous folders of OS X. It's a standard hierarchy of Unix.
    Thank you for the points. If you also feel I've "solved" your problem (as well as having been helpful) you can also mark my post as "Solved." See the following:
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Help please-"Application Not Responding" for Safari and Mail

    I read in one discussion that if Safari is slow, you can go to Font Book and select the fonts with a bullet to get rid of duplicate fonts. I did that, and then decided to disable some japanese fonts I don't use.
    Now Safari and Mail don't work. Mail won't open at all, and Safari launches but doesn't load and I get the spinning wheel.
    I used Disk Utility to fix permissions, and that didn't solve the problem, and now my Disk Utility also says "Application Not Responding".
    I also went back to Font Book and enabled all the fonts I disabled. Still nothing.
    ( I can use Netscape-so it's only Mac applications I guess)
    Any help is very much appreciated.
    Thanks!
    powerpc g4   Mac OS X (10.3.2)  

    I read in one discussion that if Safari is slow, you
    can go to Font Book and select the fonts with a
    bullet to get rid of duplicate fonts. I did that, and
    then decided to disable some japanese fonts I don't
    use.
    Now Safari and Mail don't work. Mail won't open at
    all, and Safari launches but doesn't load and I get
    the spinning wheel.
    I used Disk Utility to fix permissions, and that
    didn't solve the problem, and now my Disk Utility
    also says "Application Not Responding".
    I also went back to Font Book and enabled all the
    fonts I disabled. Still nothing.
    ( I can use Netscape-so it's only Mac applications I
    guess)
    Any help is very much appreciated.
    Thanks!
    powerpc g4 Mac
    OS X (10.3.2)
    Wow- i fixed it! I remembered that when I was in Font Book originally, there were some fonts disabled, and I enabled them.
    I couldn't remember EXACTLY which ones, but I disabled some I thought were the ones, and VOILA!
    Mail works, Safari works...what a relief!
    And it only took me HOURS...oh well.
    If this might help anyone, here are the fonts I disabled again-
    BeteNoirA Regular
    BoyzRGross
    Chrome Yellow
    Coventry Garden
    FancyPants
    HardlyWorthit
    PleasinglyPlump
    RaggMoppRegular
    Anyone know if I should throw these fonts away? maybe a stupid question, but I'm not very good at this stuff and hesitate to change anything.
    powerpc g4 Mac OS X (10.3.2)

  • Help Please!! Script for table needed.

    Hi,
    I'am formating a table in Indesign with figure in the cell like for example $(123.45) and theres a lot if it. I need to separate or move the $ sign to previous column and the closing parenthesis to the next column. What I do is to insert new column before and after then copy and paste the $ to previous column and the parenthesis to the next. Is there anyone knows to automate this using script.
    Thanks,
    DennisM

    dennismacaburas wrote:
    I'am formating a table in Indesign with figure in the cell like for example $(123.45) and theres a lot if it. I need to separate or move the $ sign to previous column and the closing parenthesis to the next column. What I do is to insert new column before and after then copy and paste the $ to previous column and the parenthesis to the next. Is there anyone knows to automate this using script.
    If your tabel isn't too complicated you can use this workaround:
    1) convert table to text with TAB separator
    2) replace "^t$(" to "^t$^t("
    3) replace ")" to "^t)"
    4) convert text to table
    But what with "(" ?
    Do you want to have this:
    $ | (123.45 | )
    or
    $( | 123.45 | )
    robin
    www.adobescripts.com

  • HELP please with PC Suite for Newbie with 6085 on ...

    Hi I have Bluesoleil and PC Suite installed on my computer,and am having connection problems.
    When I can get PC suite connected it disconnects shortly afterwoods. Only by removing the USB Dongle, and re-inserting it will PC suite re-recognise the connection.
    Below are details of my installation:
    Nokia PC Suite 6.85.14.1, English
    Nokia Connectivity Cable Driver 6.85.10.0
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Detected Internet browsers:
    - Microsoft Internet Explorer 7.0 (Default browser)
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 2180)
    - IVT BlueSoleil (Version: 2.6.0, Build: 1)
    PC Connectivity Solution:
    Version 7.37.22.0

    you need to copy the contacts from sim card to phone memory to make them visible to pc suite.
    What's the law of the jungle?

  • HELP PLEASE Acrobat Pro 8 for MAC PDF files printing all black pages (other file formats JPG and TIFF and XLS etc are fine)

    Pages print blackout  or black washout fuzzy when using scanned image to PDF creation or "Save As" PDF from JPG or other.  All other documents print perfectly.  Just not PDF's.  Worked fine up until today.  If I open JPG, print to PDF and try to print that PDF file, page is all black.  Any ideas on how to resolve?  Thanks!!

    Pages print blackout  or black washout fuzzy when using scanned image to PDF creation or "Save As" PDF from JPG or other.  All other documents print perfectly.  Just not PDF's.  Worked fine up until today.  If I open JPG, print to PDF and try to print that PDF file, page is all black.  Any ideas on how to resolve?  Thanks!!

  • HT2486 I am sending an email to a group which I have created in my contacts.  I would like to hide the list of people's emails but cannot see how I can do that.  Can anyone help please?

    I am trying to send an email to a group which I have created in my contacts.  I would like to hide the list of email addresses but cannot see how to do this.  Can anyone help please?

    Thank you for your message.  
    I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it)....

  • My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but uit keeps locking up. Help,please!

    My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but it keeps locking up. Help,please!

    Thank you for trying to help. I followed your instructions, it took 6 hours to download, and then said it could not solve the problem (something to do with error 9?). It will have to go back to Apple - its only 3 days since it came out of the package and its very disappointing for him. Looks like I have to hang around in the Apple store in Plymouth all tomorrow until they can fix it, or will change it. Thanks for your help.

  • I have updated my iPhone to ios 7. Now, my iTunes on my Mac wont recognise it. Help please!

    After updating my iPhone 4S to IOS7, my 10.6.8 iTunes will not recognise my iPhone. It says it requires itunes 11.1 or higher. I cannot find that update. Help please!

    Click here for it.
    (90486)

  • New to mac and i cant set up mail account with yahoo plus...help please!

    hello,its my first post and im having all sorts of problems settting up my mail account even though ive upgraded to yahoo plus as recommended....i just dont understand the port numbers and pop,can anyone help please?

    See these for help:
    Apple - Support - Mail Setup Assistant
    Configuring email accounts in Mail
    This is old but may still apply: OS X 10.5 Mail- Unable to set up Yahoo email account in Mail.

  • I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot.  I have been able to do this in the past as recently as a few weeks ago.... Help please..

    I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot.  I have been able to do this in the past as recently as a few weeks ago.... Help please..

    Thanks Eric for responding.
    I checked and it does not appear in the Applications folder.
    I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death). 
    One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
    I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
    The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
    Thanks again.

  • Blast speed is currently 2 Mbps/9 Mbps on the Comcast Speed Test. Help please!

    I've had the Blast service for quite some time, and have noticed painfully slow internet browsing for the last couple of months. I mean...pull-my-hair-out-slow.  I just did a Comcast speed test and the results were 2.31 Mpbs and 9.01 Mpbs. Um....that would explain things. But not really... as I'd love to see the speeds I'm supposed to have. Even double digits would be nice! I'm trying to run ShaperProbe but I get the error "Servers are busy. Try again later." I've tried a few times. I'll post the results if I can get the scan to work. Power level is 45-46 dBmV and SNR 35-37 Modem: ARRIS Motorola SurfBoard SB6141 DOCSIS 3.0Logs of June 2015 (the most recent, and the logs before that are January): Jun 22 2015 07:07:243-CriticalT05.0SYNC Timing Synchronization failure - Loss of Sync;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0;Jun 18 2015 08:04:503-CriticalR02.0No Ranging Response received - T3 time-out;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0;Jun 18 2015 07:08:273-CriticalT05.0SYNC Timing Synchronization failure - Loss of Sync;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0;Jun 17 2015 23:08:553-CriticalR02.0No Ranging Response received - T3 time-out;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0;Jun 16 2015 02:43:065-WarningZ00.0MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0; I would sure appreciate any ideas. I have not contacted tech support yet, although that may be faster??  We'll see.  Thanks in advance for any help!  

    ShaperProbe has not been usable for some time, unfortunately. Check to see if Comcast is reporting an outage for your area by logging in to https://customer.xfinity.com/Secure/MyServices/ or by checking the voice response system at 1-800-Comcast.
    If no outage is reported, see Connection Troubleshooting Tips. If you want to troubleshoot this yourself and still need help, please provide Information Requested for Connection-Related Posts.
    If you are using Wifi it's best to switch to an Ethernet connection if possible while measuring speed and checking the reliability of your connection to Comcast.
    If you'd rather have them do the troubleshooting call them at the phone number on your bill or 1-800-Comcast and have them send a tech out to identify the cause and correct it.
    If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit unless you have their Service Protection Plan (http://www.xfinity.com/spp/, about $5/mo). If the trouble is due to a faulty Comcast modem, eMTA, gateway device, or anything outside your home, you shouldn't be charged.

  • I can't setting 480p rightly working in adobe premiere pro, need help please.

    hi,
    i use premiere po and wish work in 480p (854x480).
    All my stuffs created and rendered (3d animation and images) are in this resolution format : 854x480
    In premiere pro, there is no 480p profil ! strange! why ?.. very disturbing !!
    Then i select the avchd 1280p and decided to change the parameters preview to 854x480 and save the profil :
    [IMG]http://www.michael-remy.fr/forum/901.jpg[/IMG]
    [IMG]http://www.michael-remy.fr/forum/902.jpg[/IMG]
    ps : What is red scared is what i don't manage to fixe or change !
    But, when i make my export video (export media) i saw big borders around my video !
    [IMG]http://www.michael-remy.fr/forum/900.jpg[/IMG]
    In fact, my content have been threated in 1280x480 instead of 854x480p even the right size of my sources files !
    Click here to see my workingspace :
    [URL="http://www.michael-remy.fr/forum/903.jpg"]http://www.michael-remy.fr/forum/903.jpg[/URL]
    what can i do ? i can't offord me to work in 1280p at source and don't want to upscale my 3d media source (bad quality result in upscale x2)
    i check every setting screen, and there are several with 1280x720 i don't manage to change :
    [IMG]http://www.michael-remy.fr/forum/904.jpg[/IMG]
    any help please ?
    ps : sorry for me expression, i'm french in fact...

    all my footage is already feautred, i can't do it again.
    Copy and paste your edited clips into the new sequence. Or, use the crop settings in the Export Settings window:

  • HP Pavilion a6000 desktop with Vista black screen - need help please!

    I have an HP Pavilion a6000 desktop with Vista.  Yesterday it was working fine and today we have the black screen that reads: 
    Award BootBlock BIOS v1.0
    Copyright (c) 2000, Award Software, Inc.
    BIOS ROM checksum error
    Detecting IDE ATAPI device...
    Found CDROM, try to boot from it...Fail
    Detecting IDE ATAPI device...
    Detecting IDE ATAPI device...
    Detecting floppy drive A media...
    Drive A error.  System halt
    I am not a techie, but looked at online forums and have tried f10 at startup with no change to the screen other than it stops after the first four lines and does not try the floppy drive.  I also pulled out the round battery, waited and then reintstalled.  Same problem.  
    Also, computer emits a single, repeating beep after startup.
    HELP!

    jjeahall
    I saw your post and wanted to comment. I'm not an expert on these types of situations but did some digging around and found the following at Tips4PC.com.... read below
    "There are two types of computer black screens that can appear in Windows. One where the computer will not boot up but you have a beep sequence sounding to let you know what the problem could be, and the other has nothing at all. No beeps, no cursor, no logo screen, and no choice to boot to safe mode or access the bios.
    If your computer will not boot up and you get a beep sequence, I am not saying it is good news, however it is a step in the right direction towards solving this problem. This is a message from your computer that can be understood by looking up your bios (the brand) beep code. For example you may have an Award Bios, Ami Bios, Phoenix BIOS, Compaq, Dell, or Acer Bios. This list goes on and on.  You can search for Bios beep codes in Google. Here is an example of results in Google search"
    Link
    Also  I went into the Troubleshooting Guide for the A6000  and found the following information.  You need to use F11 for recovery. See below
    Starting System Recovery from system startup
    1
    Turn off the computer. If necessary, press and hold the On button until the computer
    turns off.
    2
    Remove the HP Personal Media Drive if your computer includes one. Disconnect all
    peripheral devices from the computer except the monitor, the keyboard, and the
    mouse.
    3
    Press the On button to turn on the computer.
    4
    During the startup, do the following to enter the Recovery Manager program:
    When the blue screen with the HP Invent logo appears, press the F11 key on the
    keyboard. (You have only a few seconds to press the F11 key before the normal
    startup process continues.)
    5
    The computer starts the Recovery Manager program; wait for the onscreen instructions
    to display, and then follow those instructions.
    6
    Complete the computer startup, finish the registration process, and wait until you see
    the desktop. Then, turn off the computer, reconnect all peripheral devices, and turn on
    the computer.
    I am an HP employee.
    Regards,
    Cooper56
    If you’ve found this information helpful, please make it easier for others who might be experiencing a similar type issue by marking my answer as “Accept as Solution” .
    ***Of course you can also Click on “Kudos” STAR to say thanks!***
    I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

  • Have just work a load of Raw files as previous but they have saved as Video clips + JPG and turn all other CR2 files to video Help Please

    Have just worked a load of Raw Photo Files in Photoshop as on previous occasions but this time they have saved as VIDEO + JPG, also turned all other CR2 files into video in the folder. Can anybody help please.

    This forum is for discussions about downloading and installing Adobe software.  You need to find the forum that discusses using whichever software you are trying to use.
    Here is a link to a page that has links to all Adobe forums...
    Forum links page:
    https://forums.adobe.com/welcome

Maybe you are looking for