HELP....PLEASE How can i use my itouch with my laptop and my home computer

i have just purchased an apple i touch 16gb... nice machine....
the question i have is i have used my home computer as the "host computer" for i tunes however i have a laptop which i want to use aswell as my home computer for i tunes .... is there anyway i can use both without losing my music libary from my i touch when trying to sync to my laptop........?????? and without re-installing all my music like i had to for my home computer when i bought that new 12 months ago..???...... PLEASE HELP

Unselect sync automatically when iphone connects. Then click manually manage music. This is a wee bit more hassle but means that u can add music etc. from both your computers.
Hope this helps, let me know

Similar Messages

  • How can I use Apple TV with iPhone 4S and no home Internet connection?

    Ok here is the situation.  I'm at my grandparents house where I have the following setup;
    NO home Internet connection
    iPhone 4S
    Verizon carrier with unlimited data plan
    Apple TV (I believe it's the latest one)
    Lynksys router
    What I would like to do is stream Netflix, HBO GO, or You Tube and put it on my grandparent's tv where I have the Apple TV hooked up.
    I thought it wouldn't be a problem however I can't figure out how to be on the same network from the router and receive 3G data at the same time.
    Is it possible to do what I want with this setup?  If so how?
    Thanks

    I think I worked out a solution given my equipment.  I was looking around on other forums and I found the following post concerning the ability for iPhone 4S to be on 3G and wifi simultaneously.
    "I know this thread is old and op may have discovered the answer already. However, I am posting this just in case someone else might be looking for a solution.
    The solution does not require any additional software nor require a jailbreak.
    All you need to accomplish this is already built into every iPhone and iPad with 3G.
    Connect to your wifi and write down the IP address your router assigned you. Then, select static tab instead of DHCP and fill in the IP address your DHCP server assigned to your iPad. Next, fill in the subnet mask but leave the rest of the fields empty.
    You now have access to your wifi as well as 3G.
    I ran into this issue when I wanted to use live traffic using 3G for my iPad's GPS and still connect to my GoFlex Satellite using wifi. It works extremely well."
    AFter configuring my phone to the router, as mentioned above, I connected my Apple TV to the same router.  Using the mirroring option I was able to airplay Netflix, You Tube and Flixster flawlessly from my phone to the big screen.  Direct TV and HBO GO did not work however. 
    I Then tried to access items directly from Apple TV thinking that it could use the data from my phone.  I was wrong.  So all in all I'm able to stream about half of my movie entertainment applications given my situation.  I'm pleased.

  • How can i use jpg extension with forms 10g and webutil

    I have a form with webutil and i want to open imege jpg extension but thier are Bmp but my
    image jpg and image item has no jpg extension .
    How can i use jpg extension with forms 10g and webutil ?

    You can use the JFIF image format for jpg files.

  • I need help! how can i use my phone with out sim

    how could I manage the fact my iPhone 5s wont activate with out sim card? I just want to use it as a ipod!

    You can use old iPhone as iPod, but first you need SIM card to activate it.
    Insert a SIM card into the phone and connect it your computer with iTunes open and follow the activation assistant to activate the iPhone. Once the iPhone have been activated, remove the SIM card.
    Know more at:
    Using an iPhone without a wireless service plan - Apple Support
    <Edited by Host>

  • Hi please help me how can I use my iPhone 4 I am at vocation my is not working please help

    Hi I am at vocation at Italy I am not able to use my phone please help me how can I use my phone overseas thank u

    You need to make your own ringtones in iTunes then sync them to your phone. Follow the directions here:
    http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/

  • Er so i bougi bought something from game the game is Deer huntht some golds and app store took money from my visa but i didn't find any golds that i bought ! please any help or how can i use the gold or restore the money? thank you

    i bought something from game the game is Deer hunter i bought some golds and app store took money from my visa but i didn't find any golds that i bought ! please any help or how can i use the gold or restore the money? thank you

    If you've been charged but not received the item then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com

  • Please,how can I use javamail to implementing draft box on webmail

    please,how can I use javamail to implementing draft box on webmail

    I already can send and receive EMail ��create
    subfolder with javamail in imap server.but I don't
    know how implement draft mailbox with webmail .
    please expert help me . thanksyou can only create subfolders in a imap mail server ,and you can use folder class included in javamail api to access,create,modify and delete subfolders.You also can create subfolders under a subfolder as you want.
    the simple example is:
    //first create mail session
    mailSession=...
    // second create mail store
    mailStore=...
    //third get root folder
    IMAPFolder rootFolder = (IMAPFolder)mailStore.getFolder("INBOX");
    if ((rootFolder==null)||(!rootFolder.exists())) return false;
    //finally create a subfolder "outbox" under root folder "inbox"
    IMAPFolder tmpOutFolder = (IMAPFolder)rootFolder.getFolder("OUTBOX");
    if (tmpOutFolder==null) return false;
    //if the target folder not exist just create it
    //note:when you create a subfolder you can assign its attribute.Details,please read the javamail document.
    if(!tmpOutFolder.exists()) tmpOutFolder.create(Folder.HOLDS_MESSAGES);

  • How can one use Mission Control with two monitors?  Please bring Spaces back

    How can one use Mission Control with two monitors.  With Spaces I could treat each space as a single desktop.
    SyBB

    I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
    Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • [pavilion g7-2116sr] How can I use amd driver with only integrated graphic?

     Radeon hd 7670m is disabled coz it's broken. Amd driver don't work. Windows use vgasave driver. How can i use amd driver with radeon hd7660g?
    P.S.  Sorry, my english isn't good(

    Hi @Leys 
    I see you are stilll unsuccessful installing the drivers as you get the blue screen.
    Here is a link to Computer Does not Start (Windows 7, Vista, XP) that may help.
    Here is a link to Testing for Hardware Failures (Windows 7, Vista) to determine if your graphic card is defective.
    If the graphic card fails, here is a link to the HP Pavilion g7 Notebook PC Maintenance and Service Guide. Please note page 9 or chapter 1 page 9 for a list of recommended replacement graphic cards.
    If the graphic card passes you may wish to consider doing a restore back to a known good time or a full recovery back to factory.
    Using Microsoft System Restore (Windows 7)
    Performing an HP system recovery (Windows 7)
    During the recovery process there is an option to backup your personal files to prevent data loss.  If you have not done one yet I suggest you do one now.
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
    At any time you may wish to contact HP support for assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts?
    Hi there
    My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
    What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
    This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
    How do I do this please?
    I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
    So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
    Any advise please?
    Thanks

    You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
    The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
    It's not meant to be a multiple user/multiple ID device.

  • After installin Adoe phostoshop c6 and illustrator i open it then it no open because need the serial no.... i follo the steps to finde my serial no.and no real result to find it .. pleaaase help me how can i find e my seria no.. and howa y download the ph

    after installin Adoe phostoshop c6 and illustrator i open it then it no open because need the serial no.... i follo the steps to finde my serial no.and no real result to find it .. pleaaase help me how can i find e my seria no.. and howa y download the photoshop free ith no serial no and nolimit 30 days and no money? please get the link????

    Yasmine,
    Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
    That field is not for attempting to fit your entire question in there.
    Please keep this in mind next time you post.  Thank you.

  • How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

    How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

    Did you check the help page for Correct Camera Distortion and Process multiple file
    Correct Camera Distortion: http://helpx.adobe.com/photoshop-elements/using/retouching-correcting.html#main-pars_headi ng_5
    Process multiple files: http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fff.html#WS287f927bd30d4b1f89cffc612e28adab65-7ff6

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • My itunes is on an old computer.  So old that I can't update it and so Haven't used it in two years.  How can I move it to my new laptop and make sure this doesn't happen again?  Very frustrated that I've spend $$ but can't get my music.

    My itunes is on an old computer.  So old that I can't update it and so Haven't used it in two years.  How can I move it to my new laptop and make sure this doesn't happen again?  Very frustrated that I've spend $$ but can't get my music.
    I want so set up itunes on my laptop and make sure that I get all of my old music and any music shared from my sons' itunes accounts.  Do I have to set up itunes on my new laptop first and then use the same logins?  Really concerned about losing any music, etc.

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

Maybe you are looking for

  • Hi. Its exactly what it means I can now convert but it's not letting me do...

    Hi. Its exactly what it means I can now convert but it's not letting me do anything with it and all the words have gone once CONVERTED & Saved  can this be sorted or can I just get my MONEY back and I will try other avenues to get what I want. Kind R

  • Report Builder Using Cubes

    I am trying to create query logic that reflects this: If (Parameter = "Proportional" and Line Number = "310") Then True OR If Parameter # "Proportional" Then True Else False My Data: Parameter = "Proportional", "Premium", "Claims" etc. Line number =

  • Times to GMT

    Suppose I have times, in the past (many before 1970), in many different time zones. No matter what the time, zone, or dst situation, I need to convert these to the correct UTC. Not for the purpose of printing, but for internal, programmatic calculati

  • Creating Move-Out Document by Program

    Hi, For an ISU Contract, I need to create Move-Out document programatically. Which BAPI or Function Module should I use regarding this purpose. I used BAPI_ISUMOVEOUT_CREATEFROMDATA to create Move-Out doc, but its generating it, but not updating them

  • IWeb Won't Launch in Spaces

    At least that's true for me. I'm running Leopard with all the latest iLife Updates and the newest 10.5.1 System update. I launched iWeb for the first time after upgrading from Tiger to Leopard and it refused to completely load. I did all the usual th