Help please - How do I cancel a time machine restoration?

Hi
I just accidently hit restore in time machine (i photo) and don't want to restore the thousands of photos. How do I cancel? I get a message asking whether to "keep original" Keep both" or "replace". I cana't close this window as the button is greyed. See below. If I select "keep original" will I restore all the ones I have deleted? I am working with I Mac OS10.5.8 and I Photo '08
Hoping someone can help, thanks

Similar Messages

Can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

I have same problem.
However, I am unable to turn on Assistive Touch.
At one time I was able to activate it, but it went away and now I cant reactivate.
What is the solution?

Er so i bougi bought something from game the game is Deer huntht some golds and app store took money from my visa but i didn't find any golds that i bought ! please any help or how can i use the gold or restore the money? thank you

i bought something from game the game is Deer hunter i bought some golds and app store took money from my visa but i didn't find any golds that i bought ! please any help or how can i use the gold or restore the money? thank you

If you've been charged but not received the item then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com

How to keep using existing Time Machine backup after replacing main hard drive

The hard drive in my iMac (Lion) is failing. I cloned it to a new drive and installed it in the iMac. Now the system wants to start fresh with a whole new Time Machine backup.
It seems obvious that there must be a way to keep using the existing Time Machine backup set, but I can't figure out how to do it. Help, please.

If you had done a full system restore from Time Machine, it would have been done automatically. But 3rd-party cloning apps don't leave a "trail" so Time Machine can figure out that the new drive has all the old stuff on it.
Effective with Lion, there is a way to "associate" the new drive with the backups of the old one, but it requires the use of Terminal. See #B6 in Time Machine - Troubleshooting. As noted though, this only works on directly-connected backup drives, not backups made over a network.

How do I safely stop a Time Machine Restore midway through?

I started a Time Machine restore from backup at about 1pm this afternoon.
After about 15 minutes of estimating the size of the files to be transferred, it gave me a 19hr estimate for transfer time. I had heard that it could take awhile, so I wasn't totally blown away by the number.
I'm backing up about 200 GB. Well, I'm about 2 hours into it, and the time remaining has been fluctuating from 19+ hours to 14 hours. I'm at about 18 hours right now.
I'm beginning to question the ethernet cable I'm using to transfer the data, and wishing I used a USB 2.0. I've also read up on a bunch of other threads about how painfully slow Time Machine can be, and there seems to be little rhyme or reason as to when it's slow vs when it's somewhat reasonable.
So, I guess there are two questions.
Question 1) Can I safely power down, swap cables, and retry? What happens to the data that's already been pulled over?
Question 2) Should I just let it run for the next 18 hrs? I've also read other horror stories where people return to their machines after the time estimated, and it's hardly budged.
Any help would be AWESOME! If i could give you a billion help points, i would!

majmanMac wrote:
Was doing a full restore from scratch - I lost a hard drive on Monday, and just got a new one put in. Turns out the estimate was about right, as I'm now writing this from my restored machine.
Yay!
I was restoring from a Time Capsule. For some reason I just assumed it had a USB port.
Ah, yes, it does, but it's for connecting a printer or USB drive, not a Mac.
My concern that i would come back to it this morning and find it still updating has been put to rest. Phew!
Glad it's sorted out, but it does seem like there may be a problem -- that's awfully slow. See #D2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
And be forewarned: since you have a new drive, Time Machine's next backup will almost certainly be a full one, so remain connected via Ethernet. If there isn't enough free space for that, it will take an extremely long time for Time Machine to delete a lot of old backups to make room. You might consider manually deleting a lot of them, per #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

How do I know which id to delete and insure time machine restore?

I had a glitch on my computer of the screen going black at random. I also had a recall on my imac for the segate drive which was replaced once. I brought it to the apple store after a week then determined there was no recall on my new drive and reinstalled Mt Lion to get rid of the black screen issue. Now here is the problem i got home and plugged in my ext drive for a time machine restore. I restored everthing using migrate assitant except the applications and desktop. I was asked to create another user name for the transfer. I don't understand why i had to do this so just slightly changed my id name. I now need to find the desktop data and can't find it under either names. I searched the drive direct and found the info is there but migrate assitant doesn't show it. I tryed to restore back some other files but it was me to changed the name of the restore using migrate assitant again. How many ids do I need? How do I blow way the 2nd id without gettting rid of my backup on the ext drive. I am so confussed now and can't figure out which admin id has the info and which doesn't . I don't even know if the info made it to the imac hard drive. help!!!

I had a glitch on my computer of the screen going black at random. I also had a recall on my imac for the segate drive which was replaced once. I brought it to the apple store after a week then determined there was no recall on my new drive and reinstalled Mt Lion to get rid of the black screen issue. Now here is the problem i got home and plugged in my ext drive for a time machine restore. I restored everthing using migrate assitant except the applications and desktop. I was asked to create another user name for the transfer. I don't understand why i had to do this so just slightly changed my id name. I now need to find the desktop data and can't find it under either names. I searched the drive direct and found the info is there but migrate assitant doesn't show it. I tryed to restore back some other files but it was me to changed the name of the restore using migrate assitant again. How many ids do I need? How do I blow way the 2nd id without gettting rid of my backup on the ext drive. I am so confussed now and can't figure out which admin id has the info and which doesn't . I don't even know if the info made it to the imac hard drive. help!!!

My Macbook Pro was stolen, and I have replaced it with a Macbook Air. New hard drive is too small for a Time Machine restore. How do I restore my more-expensive apps (ie iWorks) on my new Macbook without repurchasing them?

My Macbook Pro was recently stolen, and I have replaced it with a Macbook Air. I attempted to simply do a restore from the Macbook Pro's Time Machine backup, but since the new Macbook Air's hard drive is significantly smaller, a Time Machine restore was not possible. I even tried to choose only settings or only my User Profile (option) when restoring, but the backup was still too large to do a restore onto the new machine. How do I restore my more-expensive apps (ie iWorks) onto my new Macbook without repurchasing them? Also, I reaad somewhere that if you went to the Mac App Store and attempted to repurchase the app and clicked BUY, it would simply alert you that you have already purchased the app (and trigger a re-download)... NOT THE CASE... So I just dropped another $19.99 for a second copy of Pages... Not my intention....
Any help would be greatly appreciated.
LM

you should get a usb backup drive as well. time machine has limited use in my eyes. it saves things. but older things can be errased ad space drops without telling you
nothing beats data redundancy. 2 saves is. 1. and 1 is none
im personally not fond of time machne though i use it only for a recovery parameter for a mac
id never ever myself consider time machine a genuine data backup tool. though most do consider it as such
drive clones such as superduper and carbon copy cloner can clone your entire drive for emergency recovery. and you can boot from them as well o. another mac

Time machine restore help

I've recently been having issues with my early 2008 black Macbook. I ran the apple HW diagnostics and determined it is a bad hard drive. I went out and bought a new 500GB SATA HD, and attempted to restore my system using a Time Machine backup. I booted into the Leopard Disc that came with my computer, formatted the drive, and ran the Time machine restore. Everything appeared to go fine (took about 2 hours, no error messages). However, after the machine rebooted and attempted to boot into OSX an error similar to this popped up. http://img149.imageshack.us/img149/7792/pict0017lo8.jpg
Any thoughts as to why this is happening? I don't really want to start over with a clean install, that's why I have Time Machine!
Other information:
My computer originally had Leopard, and was upgraded to Snow Leopard.
I have boot camp setup on my mac for Win 7. (I know this isn't backed up or restored as part of a time machine backup, which I'm O.K. with.)
Thanks in advance for all your help.

Any number of possibilities. First, did you prep the drive properly:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Any brand new drive should be setup per the above because they usually are configured for use on PCs rather than Macs.
Second, depends on how you went about the process of restoring your system. Select Mac Help from the Finder's Help menu and search for "time machine." Look for an article specifically about performing a full system restore. Also, see User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
What you saw was a kernel panic screen. Panics at startup may be indicative of a hardware problem. You might give this a try:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
To assure the problem isn't with your backup you might consider installing OS X by itself. If all is OK, then you can complete the TM restore using Migration Assistant.

ALL Photos missing after Time Machine restore (help)

So, I accidently formated the wrong drive while in Windows, (big oops) which gave me the opportunity to take Time Machine for a test drive.
I put the DVD in, and was able to restore from the TIme Machine drive. Very impressed! Everything came back just as I had left it except - whats this? The default Leopard wallpaper instead of a picture of my son? Huh strange, I thought. Until I noticed I had no photos in iPhoto.
There seems to be reminents of photos in the iphoto database - the size is 1.3gb instead of the 7gb it used to be. But 0 photos in iPhoto 08.
I went into iPhoto and choose File/Browse Backups. I selected Nov 8th, which was the last day of my backup and showed all 7000+ photos, and clicked "Restore All". This brought up something odd - a 2nd iPhoto icon in the dock, which showed a progress bar for the restore. Once the restore was completed, I still had a 2nd iPhoto icon the the bar, which was iPhoto running - but no photos in iphoto! I exited the 2nd iphoto, which disappeared, and launched my normal Iphoto icon. Still no photos! (That just seems odd that it would launch iPhoto with a 2nd icon)
So, I moved my iphoto database, and launch iPhoto in order to create a fresh database - thinking maybe that was the issue. I then did File/Restore again, and went through the whole processes again, including the odd 2nd icon. Still, no photos! And another 1.3gb iphoto database!
Is it normal for a Time Machine restore to not include your photos? Surely you are not supposed to restore them separately from within Iphoto?
What do I do now? At this point, everything went very well - except no photos! Which is awful and not at all expected! 7000+ family photos! At least, if I ask iPhoto/Time Machine to restore 'all photos' you would think it would restore 'all photos' - not show a progress bar, and then show me no photos!
p.s. I just tooked at the iPhoto Library. The 1.3gb is in /Data/ which contains folders 2000-2007, my Events, and thumbnails of all the photos - but no actual photos (the 'Originals' folder is missing).
I then went back in time, and found the 8gb iPhoto Library database. I supposed I could copy it over manually via Time Machine, and not iPhoto's Restore/TM - but - i'm so far off track of how this should have went I don't know what to think!
p.s.s. So I did just that - copied the 8gb iPhoto Library manually from TM, and pasted it in place. I help down option, and launch iPhoto, selecting the 8gb library - and BOOM... no photos!
Something is #$%# up here.
Message was edited by: metzen79

This is what it says in the help file:
Reverting to a previous Mac OS X version
If you’ve used Time Machine to back up your computer, you can easily revert to a previous version of Mac OS X if you’re experiencing trouble after installing an update.
IMPORTANT: Reverting to the previous version of Mac OS X will erase any additions or changes you’ve made to the files on your computer after installing the new version of Mac OS X. To save new or revised files, copy them onto a different disk or back them up using Time Machine before you follow these instructions. Use Time Machine only if you’re reverting to a previous version of Mac OS X 10.5 (Leopard), since Time Machine is not available with Mac OS X 10.4 or earlier.
To revert to a previous version of Mac OS X:
Insert the disc you used to install the new version of Mac OS X, and double-click the Install Mac OS X icon.
In the Installer, choose Utilities > Restore System From Backup.
In the Restore Your System dialog, click Continue.
Select your Time Machine backup volume.
Select the Time Machine backup you want to restore. To restore your computer to the state it was in before you installed a new version of Mac OS X, choose the most recent backup.
Follow the onscreen instructions.
If you backed up any individual files as described under the Important message above, you can restore them now. If you backed them up using Time Machine, recover them using the Time Machine application. (You’ll find the Time Machine application in the Dock or in the Applications folder.)
Hope this helps
Denisimo

How can I get my time machine to allow me to recover files again? After upgrading to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.

How can I get my time machine to allow me to recover files again?
After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
I've searched and can not find a solution to the problem that's being encountered.

Yeap that all makes sense now.
Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
Over wireless are you waiting for the indexing to finish.. ??
Previous backup may not show for a couple of hours.
Long short of it.. Mavericks version of TM is a pain.
Sometimes it is easier to completely ignore the TM backup and do the restore manually.
I have posted the details here. See if this helps.
Can't access old files on time capsule

I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. with the Pages app open how do I use the Time Machine to go back five hours to see the work?

I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. With the Pages app open how do I use the Time Machine to go back five hours to see my page? Can I access Time Machine within an app like Pages? How do I enter Time Machine within the application? It always takes me to the Finder. I apolgise for the mumbo jumbo. I simply do not know how to use Time Machine. It makes sense when I follow the Tutorial but then I lose it.

OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
best
Matt

I have a power pc (g5) computer that I will soon be replacing with a current i5 or i7 mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

Hi, likely the easiest is to just poll the drive & get something like this...
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
But if you have a good external drive already, just clone it.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/

How can I copy a time machine backup from one Time Capsule to another ?

How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

from this support article:
(click on image to enlarge)

After a clean install, how can I continue using Time Machine?

After a clean install, how can I continue using Time Machine?
I booted from my recovery partition, erased my HD, installed the same OS, (Lion, 10.7.5) then restored from my TM.
If it asks if i want to use TM, I say yes. When I chose the drive, it seems to want to start all over, instead of just picking up where I left off.
Is there any way of picking up where I left off?

Hi Frank,
You are sure you looking in your Library in /Users/YOUR_USERNAME/Library and not /Library at the top level of your harddrive?
When you open iCal what do you see? Are the calendars the two default Home and Work ones?
I really appreciate the responses -- especially if you are in the UK as opposed to Ontario.
Why, do you have something against London Ontario?
John M

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

Help please - How do I cancel a time machine restoration?

Similar Messages

Maybe you are looking for