Help please: How to create a frame? (not as you think)

You probably know lots of sites are built with frames, and I
do not mean the normal frame in flash, I mean a frame to another
URL.
I was wondering, can I create such frame in a flash file?
Thank you, Gal.
Please replay if you did not understand something.

Galgofrit wrote:
> You probably know lots of sites are built with frames,
and I do not mean the
> normal frame in flash, I mean a frame to another URL.
> I was wondering, can I create such frame in a flash
file?
> Thank you, Gal.
> Please replay if you did not understand something.
No, you can't have frame within flash to display HTML.
Flash does not have browser capabilities. It can only load
text with basic HTML formatted
string. Limited to font size, color, hyper link, font types
etc... Nothing beyond that.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

How to create OA Frame Work Jsp through JDeveloper9i

Hi,
any one can help me,
how to create OA Frame Work Jsp through JDeveloper9i.
and how to depoy that jsp page into oracle application server.
plse help me,
Regards
ravi

I am also having the same problem.
can anyone help me out......?

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1.      Open a PDF that contains a PDF file attachment – done
2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3.      Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to create and share notes in icalendar

how to create and share notes in icalendar
i have created a reoccuring all day event for monday thru friday throughout the month.
Each day I write notes in the event. I do not want the notes to duplicate each day.
Now do I set up so notes for that day is only in that day.
thank you
angelscott1

Hi Parga,
You need to declare the variable at Interface controller and need to map this at the context level.
Like a variable declared at web dynpro component context level can be used among all views.
every web dynpro component have an Interface component. this can be used in other components where this perticular component is used it is also have a Context.
For more info Take Usage of Component Controller Examples.
[Check this thead|http://help.sap.com/saphelp_nw70/helpdata/en/3a/165da11551994db913f56829f8f3f1/frameset.htm]MPUSAGE
WDR_TEST_CMPUSAGE_CI1
WDR_TEST_CMPUSAGE_CI2
WDR_TEST_CMPUSAGE1
WDR_TEST_CMPUSAGE2
WDR_TEST_CMPUSAGE3
WDR_TEST_CMPUSAGE4
WDR_TEST_CMPUSAGE5
WDR_TEST_REF_CMP_USAGE_CI
WDR_TEST_USAGE_GROUPS_CI
WDT_COMPONENTDETAIL
WDT_COMPONENTUSAGECheerz
Ram

Can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

I have same problem.
However, I am unable to turn on Assistive Touch.
At one time I was able to activate it, but it went away and now I cant reactivate.
What is the solution?

How to create a frame in a applet?

Dear All,
How to create a frame in a applet?
Thanks in advance
Kityy

You can't add a Frame/JFrame to an Applet/JApplet.
An Applet/JApplet has its origins in the class Panel/JPanel.
So, if you make your Applet to an application you
can easily do that by putting your Applet "above" a Frame.
Maybe you can archieve your goals with some Panels?!

Requesting all to help me how to create lsmw using idoc method

hi
thanx for ur answer
requesting every body in the forum to help me how to create lsmw using idoc method.
regards,
balaji

Hi Balaji,
LSMW using IDOC is similar to using flat file method. Here you are getting data from IDOC container and mapping data with Idoc segments insted of flatfile column.
Hope this is what you are looking for. If helpful then dont forget to reward me for that
Darshan

How to create own Frame?

Hello,
How to Create My Own Frame, store it as preset and use it any time?
Thanks
Dhiraj

Steps to follow :
1. For creating a frame or theme, you would need to create a psd and a metadata file and place it @ the location : C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\9.0\Photo Creations\frames for frames and C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\9.0\Photo Creations\themes for themes.
2. Next you would need to delete the file ThumbDatabase.db3 from C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\9.0
3. Relaunch Application.
The psd name and metadata file name should be same.
Let me know if this works out for you.
~V

How to create a single 'not null ' validation for all the items in a page ?

Hi everyone ,
how to create a single 'not null ' validation for all the items in a page ? I have many textfields . Instead of creating 'not null' validation for each item , I would like to create a a single validation control that will serve the purpose
Thanks & Regards
Umer

Nice1 wrote:
bob , as u said I have done the following :
1) under create button , there are 9 items and for each item I have set Required to 'Yes'
2) under delete button , there is 1 item and have set Required to 'Yes' for the item
3) defined page validation for 9 items under 'create ' button and have set it to fire when 'create ' button clicked
4) defined page validation for 1 item under 'delete ' button and have set it to fire when 'delete ' button clicked
now , when I click 'create' button it even shows for the item under 'Delete ' button that it is a required itemSorry, I didn't see this note. The required template won't work, there is no way to attach it to the button.
The best solution is as the reply a couple replies up
Create 2 page type validations as a PL/SQL with code
1st validation
:P1_ITEM1 IS NOT NULL and :P1_ITEM2 IS NOT NULL ...... and :P1_ITEM9 IS NOT NULL include all 9 items
Set the When Button Pressed to the CREATE button
2nd validation
:P1_ITEM10 IS NOT NULL
Set the When Button Pressed to the DELETE buttonI think that's going to be the easiest way to do it.
Edited by: Bob37 on Apr 27, 2012 12:02 PM

Please help. How to create reports including charts in pdf format .

Please help.
I have two problems.
Any help will be highly appreciated.
1. I need to query database through JDBC (which is easy) using servlet or JSP and then create a report in pdf format (which I do not know how to). If anyone knows how to create a report in pdf format, I would highly appreciate.
2. I need to generate charts and embed them in these reports. I do not know how to make charts. If anyone knows and helps me out, I would highly appreciate. I have to make charts and embed them in the pdf reports.
Thanks a lot in advance.
Indrasish.

Ok ibasuroy, but i don�t speak ingles.
first problem:
http://sourceforge.net/projects/jfreereport/
JFreeReport is a Java class library for generating reports. It provides a flexible printing functionality for Java applications and supports output to Printers and PDF, Excel, HTML and XHTML, PlainText, XML and CSV files.
second problem:
http://sourceforge.net/projects/jfreechart/
JFreeChart is a class library, written in Java, for generating charts. Utilising the Java2D APIs, it currently supports bar charts, pie charts, line charts, XY-plots and time series plots.
write my. I have a class JDBCAdpater and a BridgeJFreeReport
[email protected]

Please can anybody help me how to create the job by using HR_JOB_API?

hi,
actually i tried by using this,but iam not able to do that.
1.should we create job definition before job creation?
2. should we create flexfield segment values before job definition?
3. what are the parameters we have to give mandatatory?
up to my knowledge when we crate job from front end then automatically job definition and job will be created.
but here how to do that please let me know.
and if u have any sample code please send me as soon as.
if jobdefinition and flexfield vlues must be defined before job creation then let me know how to create jobdefinition and flexfield values.

ever thought about attending a training? When you think this is not needed, please read the flex guide, then the hr guide, and then scan some metalink notes on hrms api's.
good luck,
thierry

HELP PLEASE How do I remove my credit info from iOS7. "None" is not there anymore as a selection btw help.

Please help idk how to remove credit information the "none" selection is gone now ios7 plz help

Yes it is...

How to create a named not null constraint

Hi All,
How to create a table with a named not null constraint?
and how to add a named not null constraint to a table?
Thanks for the help.

Hi,
I guess you are asking for a column inside a table, having a named not null constraint. Am I correct? Try the following.
SQL> create table checktab (col1 varchar2(30) constraint NN_const not null);Is this what you required?
Please post technical questions in respective forums.
Hope that helps.
Savitha.

How to create a frame or box to surround a element

Hi,
Would appreciate some help on this one, as I can't seem to figure it out.
How do you create a frame or box to surround an element, for example when using Hazardstatements.
The only way I can think of is to use tables, but is there any other way?
Example:
Danger
Some warning text
Some warning text
Thanks
Best regards
Ronny

Hi Ronny...
It's of my opinion that there while you may want this content formatted as a table when published, you should not be authoring the content with a table to achieve that formatting. This type of formatting should be applied as a "publishing process" after the DITA topics are assembled into a FM book and FM chapter files. If you're publishing to other formats (like HTML), the formatting can often be achieved through CSS or by other publishing processes. You don't want your source files to enforce some type of formatting that may differ depending on the deliverable.
You may want to set up some ExtendScript wrapper that performs various pagination and formatting tasks to your generated FM files. While you can use ExtendScript to actually wrap the hazardstatement in a table, you can also look into using other tools such as FrameSLT (from West Street Consulting), or Structure Snippets (from Leximation, my company).
http://www.weststreetconsulting.com/WSC_FrameSLT.htm
http://leximation.com/tools/info/structuresnippets.php
Cheers,
Scott Prentice
Leximation, Inc.
www.leximation.com

Help please: How to create a frame? (not as you think)

Similar Messages

Maybe you are looking for