Help please!  How to restore Firmware pre update?

I accidentally interrupted the SMC Firmware Update and now I have a plethora of problems.
Please, can you lead me to a restore solution?
Thanks so much!!

Call Apple. You may need a new logic board. There is no software fix for it.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Similar Messages

  • I have an iphone 4 jammed in MDU mode, I conect to itunes and asked to restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1.  Can anybody help me how to restore my iphone

    I have an iphone 4 started the problem saying no service, then when restarting asked to connect to itunes and became jammed in MDU mode, I connect to itunes and clicked on  restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1.  Can anybody help me how to restore my iphone.  or what to do next, some reseller asked me to go the shop where I bought to replace it for me as this error cannot be restored by any shop.  It has to be returned to apple and get it replaced.  The warranty already expired and don't know what to do.
    Please help

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • Can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    I have same problem.
    However, I am unable to turn on Assistive Touch.
    At one time I was able to activate it, but it went away and now I cant reactivate.
    What is the solution?

  • How to restore iPad without updating?

    How to restore iPad without updating? Why this stupid apple didn't put two buttons for restoring and updating iDevice.. they should include  "RESTORE ONLY"

    Performing a restore from a backup does not upgrade the ios.

  • I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps

    I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps are so that i can update them. Please give some solutions please

    isthisonetaken wrote:
    I'm having this problem. It started yesterday. I have 2 updates, but when I open the App Store, they won't appear.
    Do you have apps purchased with a differnt AppleID?
    For example, mine shows 12 updates but only 2 show up as being available.
    The others are on my daughters account.
    I log out of my iTunes account and log in with hers and those updates show up.

  • Please, Please help. How do I install this update

    I keep getting this error (F3-FF00-0006) when trying to do a system recovery on a Toshiba Satellite L500 Laptop that was running W7. The Toshiba support site say's to download the HDD Recovery Update 1.0.0.4 and install  it. I can download it on another computer and put it onto a disk, but if the L500 I am trying to do a recovery on is all but useless...how do I get the update onto it to fix this recovery error!!!
    This seems to be a flaw in Toshibas logic here. There are no instructions on what to do with the update, any help will be most appreciated. Oh, I have put the update on a disk and put into the DVD drive of the L500...and am still getting the same error
    Kind regards
    Calmlee

    Have ordered Recovery disks from Toshiba support at $66 the set. See if that sorts out my problem.

  • How to restore Firmware on Z10

    Hello
    i have massive problems with my Z10:
    -> Freezing Keyboard or hanging Apps (rarely)
    Most problem is Telephone module:
    If i try to call some thru BT on my car, and receiver is not responding/or call cannot connect to another phone, the Z10 phone app is completely in hanging mode like:
    Call will be end -> but nothing appears
    Cannot make a call further -> app let me not type a phone number
    So iam not sure if this is a Hardware problem or more software.
    Z10 is up2date
    But i tried now several time to restore firmware.
    I was making security wipe.
    Can some help me with a step by step instructions?
    This is not working:
    blackberry.com/updates
    -> phone will not found and there is no option to restore.
    -> bb link have ot rescue mode or firmware repair
    I tried all combinations:
    Start bb link without connected phone
    -> connect phone in powered off mode
    -> bb link did not found / start a update/repair mode
    Some help?
    Thanks

    While officially, you shouldn't do this (according to the KB,) I can confirm this method will reload the OS to the Z10. I did it on mine last night. If you don't have a backup you will lose your data. Since there is no control over what databases are restored I didn't do a restore. I just started over.
    http://www.blackberry.com/btsc/KB33480
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • How to restore when during update, got 'connect to itunes" icon, no option to restore?

    I was doing the latest update, but something went wrong and I got an update failed message. iPod touch had "connect to itunes" icon. iTunes did have a restore button, but only for an instant, and it went away (stupid robo-call rang, and I may have jumped). Now iTunes won't give me a restore option, and sync option in File/devices is grayed out.
    Itunes also doesn't recognize the iPod when I plug it in, although the computer knows it's there. (Makes a sound when I connect it.)
    I have rebooted computer, checked iTunes is latest version.
    Tried the solution of holding down power and home buttons. The apple icon came up, but then it went immediately to the "connect to itunes" message.
    I haven't tried the solutions that require you download a jailbreak program. Hope that isn't necessary.
    Looked all over the internet, and haven't found a situation described where iTunes took away the restore option. Can someone help me?

    - Try another cable
    - Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.                   
    - If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    Try on another computer                       
    For how to restore:
    iTunes: Restoring iOS software

  • HELP PLEASE How do I remove my credit info from iOS7. "None" is not there anymore as a selection btw help.

    Please help idk how to remove credit information the "none" selection is gone now ios7 plz help

    Yes it is...

  • How to restore apps after update

    I have an IPad2 with 4.3.5 and due to some of the newer apps I was forced to upgrade to the newer 6.1.3
    before i updated the IOS i backed up with the itune to my laptop. 
    i than installed the new ISO, when it is finished it acted as it is a new IPad there were none of my old apps.  my pics did move over.
    I than clicked on restore under the backups and it took about 8mins and when it finished  I still had nothing on my Ipad??
    is there is a way to restore my old apps or i have to redownload everything due to the newer IOS?
    thanks

    Is this how you restore from iTune Backup?
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • How to restore iphone without updating software

    how do i get my iphone 3 to restore without updating to ios 4.1.2 i have tried unchecking "check for software updates automatically" but it still won't just restore what else should i try?

    You can't.  Part of the restore process involves updating the iOS.
    The only reason why you wouldn't want to update your iOS is because your phone is jailbroken.  Jailbroken phones cannot be discussed on this forum.

  • How to restore hidden ("cancelled") updates in HP Support Assistant

    Hi, I just "discovered" HP's Support Assistant and, while checking which updates are available, inadvertently clicked on the [X] next to one of them. Now I can't seem to find how to restore this update to "available".  Any suggestions? Cheers,  

    Right mouse click on MY Computer  --> properties then select System Protection. Only the C partition should be set to ON.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Help needed: how to restore windows partition on Mac OS X

    i delete my windows vista partition by accident,anyone knows how to restore it. what software i need? Thanks:)

    If you deleted the partition you'll need to use BootCamp to recreate the partition.

  • How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help me how to restore it to factory settings.

    How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help!

    Without internet connection there is no way for you restore the iPad.

  • Help please - How do I cancel a time machine restoration?

    Hi
    I just accidently hit restore in time machine (i photo) and don't want to restore the thousands of photos. How do I cancel?  I get a message asking whether to "keep original" Keep both" or "replace".  I cana't close this window as the button is greyed. See below.  If I select "keep original" will I restore all the ones I have deleted? I am working with I Mac OS10.5.8 and I Photo '08
    Hoping someone can help, thanks

    Hi
    I just accidently hit restore in time machine (i photo) and don't want to restore the thousands of photos. How do I cancel?  I get a message asking whether to "keep original" Keep both" or "replace".  I cana't close this window as the button is greyed. See below.  If I select "keep original" will I restore all the ones I have deleted? I am working with I Mac OS10.5.8 and I Photo '08
    Hoping someone can help, thanks

Maybe you are looking for

  • Stuck with Labview?

    So your stuck with Labview. Don't let that restrict your choice of DAQ boards. Amplicon provide PC based data acquisition boards with a range of software support, including Labview drivers. Take the ADLink DAQ2200 for example: http://www.amplicon.co.

  • USE OF PARAMETERS IN DISCOVERER

    Hi, from El Salvador my question is? in a query that have parameters, when customize the parameters, how can put TO_DATE(SYSDATE)-1 in default value ?

  • Ideas on adding licenses to a 8.X Communications Manager cluster before upgrade to v10.

    Hi, hope is all well. This is something I started working with my global Cisco reseller but it takes sometime I wanted to make sure I see different options if possible to present. My company has deployments of collaboration products mainly on v8.x (a

  • Excel not saving

    When i use Excel and add a comment to a cell "Document not saved" some times comes up. To get past this i have to delete the coment and re do it, it then some times saves. I dont know what I am doing wrong and what I am doing right because it does so

  • HP Touch Pad freezing and will not restart nor shut down.

    My HP Touch Pad will not reboot nor shut off. I have a "hp" logo on the screen that will not go away. I have tried all of the 5 Ts with no sucess. I tried downloading webOS Doctor several times but when it went to connect my device I got an error mes