Help Please. I am looking for an archived fp 7

I have been having real problems with Flash Player freezing
on certain sites - my ISP homepage being one of them.
I solved it by finding and installing Flash PLayer 7.0.69.0
stand alone for Netscape and its equivalent for IE.
However, during a system restore I lost these files and now
cannot find them again. Can anyone point me at them please?
Many thanks.
Edit: I also asked their support and got told what I was
looking for doesn't exist!!
It's actually here:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14266
Small wonder they have such problems!

Gabriel,
Have you look on Amazon or eBay?
B-rock

Similar Messages

  • Who can help me? I look for adobe Illustrator 8.0 for free

    Who can help me? I look for adobe Illustrator 8.0 for free

    Thanks for this answer, I had a look by ebay, may be 50 € or 70 $  for full
    version Illustrator 8.0
    2010/2/8 MWHebert <[email protected]>
    Translation:
    I just wanted some advice on where I get a free or cheap Illustrator
    program. I've heard Adobe Illustrator 8.0 should now be getting even free of
    charge. Thanks anyway, that anyone has reported.
    >
    The thing is, unless you know someone who will give you Illustrator 8 for
    free, there is no normal way to do this.
    >
    Cheap is different, go to eBay and there are a good number of cheap AI 8
    version for sale at a very good price. But beware, like the previous poster
    said, make sure you have the OS and computer to run it. It requires OS 9 -
    OS X 10.4 on the Mac at the least!
    >

  • Color issue with pdf from Indesign. I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

    I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

    Thank you Peter. Someone else must have been on my computer because I do not change the settings. You pointed me in the right direction.
    Thanks again.
    Patrick

  • "HELP PLEASE" GPS Marine Signals for my 61001 Noki...

    "SOMEONE HELP PLEASE"
    I have a Nokia 61001 Navigater Mobile.
    Is it possible? To enter GPS Sites for fishing into my
    Nokia 61001?
    Someone did say it is possible who already own's one.Unfortunately,I lost his telephone number.
    Any help would be most appreciated,
    Regards,
    chase444.

    Hi chase444
    If you look in your "inbox" there is a PM for you with some information on Nokia LMX files for POI.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Looking for Simple Archiving Catalog Software

    I  have previously used AutoCat. Simply drag and drop a folder and AutoCat copies
    the folder hierarchy and makes aliases of all the files. I keep this a catalog to
    be able to simply find all of my files by a search through the finder. It tells
    me the archive number of the disk where I can find a particular project. Very
    simple, very legant. Not supported in Lion so I'm looking for a replacement.

    Touvaly serves the same function as AutoCat. But it goes too far. It makes a "vrtual copy" of a removable disk. It is so hard to tell if you've pulled up real files and folders or the fake ones! - Somebody PLEASE bring back AutoCat!

  • Need help to open and look for file by name

    Hi,
            Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
    How can i look for the file by his name ?
    Thx =)

    Hi ,
        Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
    The user ll type the serial that he wants delete ...
    I already figured out what i need guys .. thx for the help ^^
    I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
    Thx ^^

  • I have broken button on keyboard any help where should i look for replacement?

    i have a broken button on my keyboard (macbook pro mid 2012 black) any help where sould i look?

    theo2260,
    look on online auction sites.

  • HELP - Where statement to look for Sting

    I want to update the where clasue to include multiple metadata types. We have action-acct and fail-acct
    select a.account_number b.metadata
    from accounts a, data b
    WHERE 'disable-acct'= B.metadata(+)
    is this correct?
    select a.account_number b.metadata
    from accounts a, data b
    WHERE 'disable-acct'= B.metadata(+) or
    'action-acct' = B.metadata(+)

    user607303 wrote:
    that does not return any values. I think that statement is looking for the presence of both Police and Dune. It should be something closer to either Police or Dune. Ah, an OP with a sense of humour, that's good. :)
    My query had the or clause but it generates an error for outerjoins.It will...
    SQL> ed
    Wrote file afiedt.buf
      1  with accounts as (select 1 as account_number from dual union all
      2                    select 2 as account_number from dual)
      3      ,data as (select 'disable-acct' as metadata from dual)
      4  select a.account_number, b.metadata
      5  from accounts a, data b
      6  where 'disable-acct' = b.metadata(+)
      7* or 'action-acct' = b.metadata(+)
    SQL> /
    or 'action-acct' = b.metadata(+)
    ERROR at line 7:
    ORA-01719: outer join operator (+) not allowed in operand of OR or IN
    SQL>But if you use ANSI syntax...
    SQL> ed
    Wrote file afiedt.buf
      1  with accounts as (select 1 as account_number from dual union all
      2                    select 2 as account_number from dual)
      3      ,data as (select 'disable-acct' as metadata from dual)
      4  select a.account_number, b.metadata
      5* from accounts a left outer join data b on (b.metadata in ('disable-acct','action-acct'))
    SQL> /
    ACCOUNT_NUMBER METADATA
                 1 disable-acct
                 2 disable-acctor
    SQL> ed
    Wrote file afiedt.buf
      1  with accounts as (select 1 as account_number from dual union all
      2                    select 2 as account_number from dual)
      3      ,data as (select 'disable-acct' as metadata from dual)
      4  select a.account_number, b.metadata
      5* from accounts a left outer join data b on (b.metadata = 'disable-acct' or b.metadata = 'action-acct')
    SQL> /
    ACCOUNT_NUMBER METADATA
                 1 disable-acct
                 2 disable-acctAlthough I'm not sure what your query is trying to achieve from what little you posted.

  • Help please: Changing buton look in onmouseover...how?

    I have some buttons I created in JSC and placed on a page. These buttons have images on them. I'd like to change the appearance of the button when the user moves the mouse over the image. I could't find anything in the JSC help files on this, so I'm asking here.
    How do you get the button that is being moused over to change either the image that is one it, or in some other way give the user feedback that that button is the one the mouse is over?
    Thanks!

    Hi,
    Following are the steps I followed to chage the image
    of a button for onmouseover event:
    1. Drag and drop a button
    2. In the properties sheet go to the image property
    and click on the ... button
    3. Choose the image you want on the button
    4. Copy the image that you want displayed when the
    mouseover event occurs to the resources folder
    5. In the javascript section of the properties sheet,
    click the ... button next to onmouseover property
    6. Enter the following line of code
    document.getElementById('form1:button1').src="resource
    s/image1.gif"
    7. Click on save and run the application
    The line of code in the jsp source looks like this:
    <h:commandButton binding="#{Page1.button1}"
    id="button1" image="resources/heart.gif"
    onmouseover="document.getElementById('form1:button1')
    .src="resources/image001.gif""
    style="left: 144px; top: 72px; position: absolute"
    value="Submit"/>
    Hope this helps
    Cheers
    Giri :-)
    Creator Teami'm trying to do a mouse over effect on my buttons where they swap images everytime a mouse hovers over the button. I've tried to enter the javascript line you suggest, here what i put:
    document.getElementByld('form1:button1').src="resources/home01.jpg"
    It puts in the jsp code that you show and I have the images in the resources folder, but when I save and run, I only see the error sign at the bottom of the page. No mouse over effect. Any ideas?
    Thanks for any suggestions

  • New problem from "Help please-"Application Not Responding" for Safari a

    Now- when I close Font Book, my Address Book, LimeWire, and Disk Utility won't open.
    As long as I have Font Book open, they will,
    Any suggestions?
    Thanks.

    There are three Fonts folders: /System/Library/Fonts/, /Library/Fonts/, and /Home/Library/Fonts/. The first is restricted only to system access, the second to all users access, and the third to the specific user account access. You will find this similar organization for numerous folders of OS X. It's a standard hierarchy of Unix.
    Thank you for the points. If you also feel I've "solved" your problem (as well as having been helpful) you can also mark my post as "Solved." See the following:
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • JAVA HELP: Please take a look****

    I'm creating a program compute the arrival time of a train, if you know the starting time and the distance to destination (in km). Assume that the average speed of the train is 60km/h. The start time is given as the hour (using 24h notation) and the minutes. For example, if the start time is 13:46, the user will input 13 and 46. Assume that the hour and minutes provided are valid values. The output will consist in two numbers, one for the hours and one for the minutes.
    Example: if the train travels 210 km, and the start time is 10:20, then the arrival time will be 13:50 (actually two numbers representing 13h and 50min).
    class average{
      public static void main(String args[]){
         we will bb taking three values from user and
         calculate the sum and average of inputs
        // declare the variable
        double distance;
        double distancehour;
        double distanceminute;
        double avgspeed= 60/60; // average speed of the train
        double time; // average of teh three values
        // promt user to enter the values
        System.out.println("Please input the distance your are travelling:");
        distance = ITI1120.readDouble();
            while (distance < 0) {
        System.out.println("Please input the hour of departure (in 24 Hour format):");
        distancehour = ITI1120.readDouble() ;
            while (h <0) // \\ (h >=24)) {
        System.out.println("Please input the minute(s) of departure (in 24 format):");
        distanceminute = ITI1120.readDouble();
            // Intermediate
        double startminutes = distancehour*60+distanceminute; //convert hour into minutes
        double converttime = distance*avgspeed; // distance of travel multiplied by avg speed
        double subtotalminutes = startminutes+converttime;
        double totalhours = subtotalminutes/60;
        double totalmins = totalhours*60;
        double totalminutes = subtotalminutes+totalmins;
          // Result
        System.out.println("Your travel time is: " +totalhours : +totalminutes);
      }What am I doing wrong? The code isn't functioning completely.

    hi,
    try this if i got right,this program will give u the desired o/p.
    i think this will give u satisfaction,if i m right then rply me,
    public static void main(String args[])
    double distance=0;
    double distancehour=0;
    double distanceminute=0;
    double avgspeed= 60/60; // average speed of the train
    double time; // average of teh three values
    System.out.println("Please input the distance your are travelling:");
    distance = 90;
    if(distance > 0) {
    System.out.println("Please input the hour of departure (in 24 Hour format):");
    distancehour = 12 ;
    if (distancehour >0) // (h >=24)) {
    System.out.println("Please input the minute(s) of departure (in 24 format):");
    distanceminute = 34;
    // Intermediate
    double startminutes = distancehour*60+distanceminute; //convert hour into minutes
    int hourcolp=(int) distance/60;
    double mincolp= distance%60;
    //double converttime = distance*avgspeed; // distance of travel multiplied by avg speed
    //double subtotalminutes = startminutes+converttime;
    //double totalhours = subtotalminutes/60;
    //double totalmins = totalhours*60;
    //double totalminutes = subtotalminutes+totalmins;
    // Result
    //double totalminutes = subtotalminutes+totalmins;
    int totalhours = (int)distancehour+hourcolp;
    int totalmins = (int)distanceminute+(int)mincolp;
    totalhours= totalhours+(int)totalmins/60;
    totalmins= totalmins%60;
    System.out.println("Your travel time is: " totalhours ":" +totalmins);
    }

  • Help please-"Application Not Responding" for Safari and Mail

    I read in one discussion that if Safari is slow, you can go to Font Book and select the fonts with a bullet to get rid of duplicate fonts. I did that, and then decided to disable some japanese fonts I don't use.
    Now Safari and Mail don't work. Mail won't open at all, and Safari launches but doesn't load and I get the spinning wheel.
    I used Disk Utility to fix permissions, and that didn't solve the problem, and now my Disk Utility also says "Application Not Responding".
    I also went back to Font Book and enabled all the fonts I disabled. Still nothing.
    ( I can use Netscape-so it's only Mac applications I guess)
    Any help is very much appreciated.
    Thanks!
    powerpc g4   Mac OS X (10.3.2)  

    I read in one discussion that if Safari is slow, you
    can go to Font Book and select the fonts with a
    bullet to get rid of duplicate fonts. I did that, and
    then decided to disable some japanese fonts I don't
    use.
    Now Safari and Mail don't work. Mail won't open at
    all, and Safari launches but doesn't load and I get
    the spinning wheel.
    I used Disk Utility to fix permissions, and that
    didn't solve the problem, and now my Disk Utility
    also says "Application Not Responding".
    I also went back to Font Book and enabled all the
    fonts I disabled. Still nothing.
    ( I can use Netscape-so it's only Mac applications I
    guess)
    Any help is very much appreciated.
    Thanks!
    powerpc g4 Mac
    OS X (10.3.2)
    Wow- i fixed it! I remembered that when I was in Font Book originally, there were some fonts disabled, and I enabled them.
    I couldn't remember EXACTLY which ones, but I disabled some I thought were the ones, and VOILA!
    Mail works, Safari works...what a relief!
    And it only took me HOURS...oh well.
    If this might help anyone, here are the fonts I disabled again-
    BeteNoirA Regular
    BoyzRGross
    Chrome Yellow
    Coventry Garden
    FancyPants
    HardlyWorthit
    PleasinglyPlump
    RaggMoppRegular
    Anyone know if I should throw these fonts away? maybe a stupid question, but I'm not very good at this stuff and hesitate to change anything.
    powerpc g4 Mac OS X (10.3.2)

  • Help Please!! Script for table needed.

    Hi,
    I'am formating a table in Indesign with figure in the cell like for example $(123.45) and theres a lot if it. I need to separate or move the $ sign to previous column and the closing parenthesis to the next column. What I do is to insert new column before and after then copy and paste the $ to previous column and the parenthesis to the next. Is there anyone knows to automate this using script.
    Thanks,
    DennisM

    dennismacaburas wrote:
    I'am formating a table in Indesign with figure in the cell like for example $(123.45) and theres a lot if it. I need to separate or move the $ sign to previous column and the closing parenthesis to the next column. What I do is to insert new column before and after then copy and paste the $ to previous column and the parenthesis to the next. Is there anyone knows to automate this using script.
    If your tabel isn't too complicated you can use this workaround:
    1) convert table to text with TAB separator
    2) replace "^t$(" to "^t$^t("
    3) replace ")" to "^t)"
    4) convert text to table
    But what with "(" ?
    Do you want to have this:
    $ | (123.45 | )
    or
    $( | 123.45 | )
    robin
    www.adobescripts.com

  • HELP please with PC Suite for Newbie with 6085 on ...

    Hi I have Bluesoleil and PC Suite installed on my computer,and am having connection problems.
    When I can get PC suite connected it disconnects shortly afterwoods. Only by removing the USB Dongle, and re-inserting it will PC suite re-recognise the connection.
    Below are details of my installation:
    Nokia PC Suite 6.85.14.1, English
    Nokia Connectivity Cable Driver 6.85.10.0
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Detected Internet browsers:
    - Microsoft Internet Explorer 7.0 (Default browser)
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 2180)
    - IVT BlueSoleil (Version: 2.6.0, Build: 1)
    PC Connectivity Solution:
    Version 7.37.22.0

    you need to copy the contacts from sim card to phone memory to make them visible to pc suite.
    What's the law of the jungle?

  • HELP PLEASE Acrobat Pro 8 for MAC PDF files printing all black pages (other file formats JPG and TIFF and XLS etc are fine)

    Pages print blackout  or black washout fuzzy when using scanned image to PDF creation or "Save As" PDF from JPG or other.  All other documents print perfectly.  Just not PDF's.  Worked fine up until today.  If I open JPG, print to PDF and try to print that PDF file, page is all black.  Any ideas on how to resolve?  Thanks!!

    Pages print blackout  or black washout fuzzy when using scanned image to PDF creation or "Save As" PDF from JPG or other.  All other documents print perfectly.  Just not PDF's.  Worked fine up until today.  If I open JPG, print to PDF and try to print that PDF file, page is all black.  Any ideas on how to resolve?  Thanks!!

Maybe you are looking for