Help, please! i can not get the sound to work on my pc

i can not get the sound to work on my pc

Try opening the device manager and remove your sound hardware and then rediscover.  This works often.  Let me know how it goes.
iGirlTech

Similar Messages

  • I can not get the debugger to work on oracle studio 12.3 - It will not attach

    I can not get the debugger to work on oracle studio 12.3 - It will not attach

    APN for Tmobile is epc.tmobile.com
    MMSC is http://216.155.174.84/servlets/mms
    Here are the instructions:
    Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
    Application manager --> Application catalogs --> New
    Catalog name: Extras-devel
    Web address: http://repository.maemo.org/extras-devel
    Distribution: fremantle
    Components: free non-free
    Refresh catalogue
    Install fAPN and fMMS
    Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
    Run fMMS and it will start with configuration
    Put APN name the same you named your MMS APN point during fAPN configuration
    Type MMSC which you can take from your operator
    Type your number starting with +
    Put max size of pics you want to have in outgoing MMS
    Save all and start sending MMS from fMMS menu.
    It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
    WHEN YOU GO TO MMS to set your configuraions, the information should look like this
    MMSC: http://216.155.174.84/servlets/mms
    Resize Image: 300
    Your Phone Number: +##########
    NOW U ARE DONE!! =)

  • After update to OS4.2.1 I can not get the ringer to work for incoming calls

    after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

    God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

  • I can't get the sound to work

    I just got the 
    HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work.  I am using it with a HP Envy 23 inch monitor that also has Beats audio and an HDMI cord hookup.  I have gone through all the steps on the monitor support page and the desktops support page.  Any help out there?  Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    No, this is not going to work, you can't hook the desktop to the AiO 23 and get sound from the AiO 23.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I can not get the temperature to work.

    Howdy
      I just got my MSI FX 5900XT yesterday and it is running fine. However I can not get the temperature to show on it. I have tried everything I can find on the forums like the different registry hacks and such. And it still does not work.
    In the one program 3D Turbo when it is first starting up it looked like the temps are trying to work then they just shut off. It stats to lite up and stuff they just goes down.
    Anyone know of another program or something else that I can try to get it to work ?
    Again I have tried everything that I have found on these forums that people have suggested so do not say try that stuff.
    I know this card has a temp probe as the 5900XT cards from other companies works fine people tell me. So unless MSI done something and took it out it should be there and be able to work just fine.

    Quote
    Originally posted by The Black Wibble
    Every piece of information about the card is obtained through the device driver so I say it is a driver problem.  I'd uninstall the driver, remove all traces of msi/nvidia driver binaries and config files using drivercleaner.  Deleting all references in the registry to MSI or nvidia might help, too, before rebooting and installing nVidia's 53.03 drivers.
    Tony.
    I purchased the card also from newegg and i have yet to get the temp sensor to work. I read in one reveiw that the chip for that is not in this card. Also that the overclocking program from Msi should not be used. I have searched all over for some info on the dynamic overclock technology DOT .The only mention of it is on the motherboard overclocking but it looks like its part of the video driver ? I have had very poor results trying to overlclock this card. 3d clock 450 ram 730 locks up all the time . I also run a amd 2400
    [email protected] Let me know if im missing something on this card or not  but dont want the hazzel of returning it

  • My Macbook are from 2012, and i can not get the Airplay to work. Apple-tv3

    Hello,
    I can not get the Airplay  work betwine my Macbook  and Airplay.
    Have read a lot about it online, and can not understand way its-not work. My mac is from 2012. have dobbel Chek. Also with Serial number on our site.
    Do you have any answer for way its not work?

    Update to Mountain Lion, or higher, which is required.
    Troubleshooting AirPlay

  • HT1766 When on Facebook that has an attachment to utube or any thing with sou,when I nd,I can not get the sound.  What do I need to do?

    WHen on face book that has an attachment to utube or anything with sound when I open it I can not get sound.  Can someone help me?

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    You may need to check for caret browsing (F7 toggles that) as well if you get a cursor if you click on the web page in case your cat pressed F7 as well.<br />
    See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works

  • My nephew put the Hallmark Channel on my computer and I can not get the sound turned off.

    My nephew put the Hallmark Channel on my computer and I cannot get the sound turned off.

    Is this a separate application? Where did your nephew install it? If you do a force quit (command - option - esc) does it show up so you can force quit it?

  • Can't get the sound to work on my 5th Gen iPod 30gig movies

    For some reason, every movie that I have on my iPod, mainly music videos, have no sound. I just bought this iPod and I am still learning how to use it, however I cannot find anything in the forums to help me troubleshoot this problem. Can anyone give me any pointers on how to get my sound to work with my movies? Thanks

    Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • TS3274 Can not get my sound to work on games apps

    Can anyone help. Cannot get any sound on my games apps, I think my son has had his hands on it again. It has happened once before but I can not remember how to switch it back on.
    PLEASE HELP
    THANKYOU
    MIKE

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • I can not get the FMMS to work on tmobile network

    I downloaded the FMMS app and try to send mms but it keeps giving me an error for APN location. the only apn location available is tmobile internet and below there is a mmsc: http://... I also am not sure what goes in there as an address.and what would be the resize 120? 200?
    Can anyone help me out please or tell me that this app actually works? thanks

    APN for Tmobile is epc.tmobile.com
    MMSC is http://216.155.174.84/servlets/mms
    Here are the instructions:
    Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
    Application manager --> Application catalogs --> New
    Catalog name: Extras-devel
    Web address: http://repository.maemo.org/extras-devel
    Distribution: fremantle
    Components: free non-free
    Refresh catalogue
    Install fAPN and fMMS
    Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
    Run fMMS and it will start with configuration
    Put APN name the same you named your MMS APN point during fAPN configuration
    Type MMSC which you can take from your operator
    Type your number starting with +
    Put max size of pics you want to have in outgoing MMS
    Save all and start sending MMS from fMMS menu.
    It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
    WHEN YOU GO TO MMS to set your configuraions, the information should look like this
    MMSC: http://216.155.174.84/servlets/mms
    Resize Image: 300
    Your Phone Number: +##########
    NOW U ARE DONE!! =)

  • How can i get the sound to work again? it doesn't ring, play music but siri works :/

    Is there anything i can do to fix this? i just restored the iPhone and it still doesn't work. please help
    thanks!

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the problem continues, take the device to Apple for evaluation and possible replacement.

  • Please, how can I get the 'spellchecker' to work?

    Have followed the instructions, but to no avail.

    Do you have a dictionary installed or selected? (See attached image.)
    Have you enabled spell checking under [http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Options]|Composition|Spelling?
    You can also download a dictionary from the settings pane opened by that last directions, but the link it offers you will almost certainly open in Thunderbird. At some point, it's best to right-click and select "open in browser" and it'll re-open in your default browser. From there you can download. I'd recommend you right-click the offered link, use "Save As" and download it. You can then drag the downloaded file onto Thunderbird's Add-Ons window, or use the small button to the left of the search box in the Add-Ons window.
    http://www.ramsden.org.uk/3_How_to_install_Add-ons_in_Thunderbird.html

  • Can not Get the Sample Recording working

    Hi All,
    This is the first time using LCCS, and my questions are:
    I used the LCCS sample Recording and I cann’t get this to work
    How to you register a repository for a given developer account, the document is not clear on how to do this
    I am having problems sharing my screen, do I need to place everything in a ConnectSessionContainer or can I use ConnectSession?
    Can anyone help me with this?
    Thanks
    Chaz

    Hi Lorraine,
    I presume that the TV is actually switched to your Joytech AV device ? I presume it gives some kind of signal so that you check that the TV can actually detect it. I once spent a happy few hours trying to use my TV in this way only to find it was switched to the composite inputs not the S-Video one. ;-)
    regards,

  • Satellite Pro M70: Can not get the TV OUT working

    I have connected my laptop to my TV via the TV-OUT socket and a 4 pin S-Video lead. I have turned on the TV as an output in the advanced settings of my graphics card. I have selected TV via the Fn-F5 keys and I get nothing on my television.
    Can anyone suggest what I might have left out to make this work?
    The S-Video lead is new and the hook up to the TV is via a Joytech AV Control Center 2.
    The Joytech unit is operational and the video lead appears OK as the Fn-F5 key press indicates that a TV is available - this disappears as an option if I unplug the video lead from the Joytech unit.
    Any help would be greatly appreciated.

    Hi Lorraine,
    I presume that the TV is actually switched to your Joytech AV device ? I presume it gives some kind of signal so that you check that the TV can actually detect it. I once spent a happy few hours trying to use my TV in this way only to find it was switched to the composite inputs not the S-Video one. ;-)
    regards,

Maybe you are looking for